Used measuring systems for sale (291)

Condition: used, et ETSYSTEM Electronic Load GPIB Here we offer you an et ETSYSTEM Electronic Load GPIB. 32615A AC & DC Electronic Load GPIB/RS232 300V, 108A, 10800VA Chodpozd Uh Iefx Agrjd The 3260A series is a 300V high-performance AC and DC load in a single unit, providing an ideal testing solution for UPS, AVR, and D/A inverters, especially for devices under test with step or square wave forms. Each AC&DC load in the high-performance series has its own control and display panel, and a 5-status recall/memory, enabling more efficient load setup. The adjustable power factor setting (PF, range: 1, 0.85 ~ -0.85) expands the simulation of the test environment. The integrated GO/NG measuring device test function provides a quick diagnosis of test results for production and QC test throughput. Features Voltage, current, watt, and VA variable display. CC, linear CC, CR, and crest factor mode. GPIB/RS232 interface and 5 status recall/memory. Power factor (PF) adjustable: 1, 0.85 ~ -0.85. Upper/lower threshold capability. Protection against V, I, W, and ℃. Dual 4 1/2-digit meter display for voltage, current, watt, and VA. Suitable for sine, square, and step waves. Width 600 mm, height 1506 mm, depth 600 mm 196kg Type: 32615A AC & DC Electronic Load Condition: used Scope of delivery: (See picture) (Changes and errors in the technical data are subject to change!) We would be happy to answer any further questions you may have by phone.

Condition: excellent (used), Year of construction: 2018, Model IM-7010, Model Year 2018 Type: Measuring Head Model with Transmitted and Reflected Light Image Sensor: B/W CMOS, 1", 6.6 megapixels Display: LCD Monitor, 10.4" (XGA: 1024 × 768) Lens System: Dual Telecentric Lens Cedpfx Aeyc N Egogrehd Image-based Measurement Measuring Range: - Standard Measuring Mode: 200 mm × 200 mm (4 × R50) - Precision Measuring Mode: 125 × 125 mm Display Resolution: 0.1 µm Repeatability (without stage movement): - Standard Measuring Mode: ±1 µm - Precision Measuring Mode: ±0.5 µm Repeatability (with stage movement): - Standard Measuring Mode: ±2 µm - Precision Measuring Mode: ±1.5 µm Measurement Accuracy (±2σ): - Without stage movement: - Standard Measuring Mode: ±5 µm*1 - Precision Measuring Mode: ±2 µm*2 - With stage movement: - Standard Measuring Mode: ±(7 + 0.02l) µm*3 - Precision Measuring Mode: ±(4 + 0.02l) µm*4 External Remote Input: Voltage-free input (with and without contact) External Output: I.O./N.G./FAIL/MEASUREMENT Photo-MOS Output: Rated load 24 V DC, 0.5 A, ON-resistance max. 50 mΩ Interfaces: - LAN: RJ-45 (10BASE-T/100BASE-TX/1000BASE-T) - USB 3.1: 4 ports (rear) - USB 2.0 Type A: 2 ports (front) Recording: 500GB Hard Drive Illumination System - Transmitted Light: Telecentric transmitted light illumination (green LED) Ring Illumination: Reflected light (ring light) with four segments XY Stage: Travel range 100 × 100 mm (motor-driven), max. load capacity 5 kg Z Axis: Travel range 75 mm (motor-driven) Power Supply: 100 to 240 V AC, 50/60 Hz, max. power consumption 430 VA Environmental Resistance: - Pollution Degree: 2 - Overvoltage Category: II - Ambient Temperature: +10 to +35 °C Relative Humidity: 20 to 80% RH (non-condensing) Weight: approx. 30 kg

Condition: excellent (used), As a result, the FAG Detector III is particularly useful for detecting: • imbalance and misalignment. • rolling bearing damage. • gear damage. Cjdpfxoz Skqzs Agrehd

Condition: excellent (used), Year of construction: 2014, functionality: fully functional, Meisterbock from the automotive industry, very good condition. Paletti (should be compatible with Witte), system: "precision profile 40" Cjdpfx Aeuaz Ryogrjhd Profiles 80x80 lengths: 2x120, 2x240, 760, 920, 2x1080, 1880 120x120 lengths: 2x160, 2x480, 2x640, 2x800, 3x960, 3x1160, 2x1760, 2x2040 This is the normal 120x120 profile, 2 parts are "120x120 web"

Condition: excellent (used), incl. case, charging socket, measuring cable 16 GB memory card Codpfey Edb Nsx Agrehd

Condition: excellent (used), HOMMEL WERKE LV-50E surface roughness measuring device. Csdpfx Asz Skwzogrehd

Condition: good (used), Keyence RB-1200 3D Bin-Picking Robot Vision System with Camera Unit and Controller Manufacturer: Keyence Model: RB-1200 Type: 3D Bin-Picking Vision System for Robots System: Industrial image processing system for automatic part recognition Camera Unit: Keyence RB-1200 Vision Sensor Components: Camera unit, vision controller, mounting frame with four sensor modules Function: 3D detection and position determination of unordered parts in containers Application: Automated picking and removal of parts by industrial robots Connections: Industrial communication interfaces on the controller Cjdpfxjz Dlale Agrjhd Scope of delivery: Camera unit, controller, sensor mounting frame, connection cables Condition: Good Location: Fulda

Condition: new, functionality: fully functional, warranty duration: 24 months, input voltage: 240 V, measuring range X-axis: 120 mm, measuring range Z-axis: 30 mm, overall weight: 70 kg, workpiece weight (max.): 100 kg, feed length X-axis: 120 mm, feed length Z-axis: 30 mm, travel distance Z-axis: 350 mm, Equipment: type plate available, -Leasing options are available!!!- ConturoMatic CV120 contour measuring device – “simply measure contours” -Sample parts can be sent in for free measurement; online demo available after consultation. Also, ask about our leasing options; we will gladly connect you with our partner. ✅ Up to 30% declining depreciation on movable assets* ✅ Valid for investments starting in July 2025* ✅ T&S products are fully eligible for funding* Contour measuring system with feed unit and motorized Z-axis Chsdpoq Nzd Nefx Agrsd Scope of delivery: - CV120 motorized feed unit with precision guide - External control and regulation unit - Motorized Z-axis - Evaluation computer, desktop version W11/64 bit - 24" TFT monitor - ConturoMatic evaluation software; operating manual - Cable set - CM software updates FREE!!! Technical data CV120: Feed unit (X/Z measuring axis) - Z-axis measuring range: 30 mm - X-axis measuring range: 120 mm - Measuring speed: 0.1-1.75 mm/s - Tilt adjustment: +/-15° - Automatic probe tip lifting function Z-axis - Positioning range: 320 mm, motorized Accuracy: X-axis +/- (1.2 µm + 2Lx/25) µm* [L = mm] Z-axis +/- (1.8 µm + 2Lz/25) µm* [L = mm] Note: Various accessories are available as options to adapt our CV120 to the required measuring tasks and for system expansion, such as different probe arms, universal clamping devices, or customer-specific part holders. Probe arms with tip lengths from 2.5 to 59.5 mm available... * according to specification T&S/CV120 -Subject to technical changes- Commodity code: 90318020 -2 year warranty- Photos contain special accessories that are not included in the standard scope of delivery. *For legal reasons, we are not permitted to provide any legal or tax advice on this matter, and the above-mentioned information must not be interpreted as advice. If in doubt, please contact your relevant contact persons (specialist department or tax advisor).

Condition: used, Keyence Type: VR-5200 + VR-5000 3D profilometer. Technical data: Observation and measurement range: Horizontal: mm 24.0 12.0 8.0 6.0 7.6 3.8 2.5 1.9 Vertical: mm 18.0 9.0 6.0 4.5 5.7 2.9 1.9 1.4 Measurement resolution 0.1 μm: Height measurement: Height measurement range without image stitching in Z: 10 mm 1 mm With image stitching in Z: 50 mm 30 mm Repeatability (σ)*1 without image stitching in Z: 0.4 µm With image stitching in Z: 1.0 µm Width measurement: Measurement accuracy*1 without image stitching in Z: ±2.5 μm With image stitching in Z: ±4.0 μm Codpfx Aszd Uhzogrehd Repeatability (σ) *1 1 μm 0.5 μm Measurement accuracy*1 ±5 μm ±2 μm XY travel: 184x88 mm Z travel: 73 mm Includes: Control unit VR-5000 + software with licenses For sale from our location! Condition: fully functional + no signs of wear For further technical information, please refer to the manufacturer. Scope of delivery: (As shown in the picture) (Changes and errors in the technical data are subject to change!) We would be happy to answer any further questions you may have by telephone.

Condition: excellent (used), emtest / AMETEK Automotive EMC Testing and Simulation System Manufacturer: emtest / AMETEK System: Automotive On-Board Network and EMC Testing System For sale is a professional testing and simulation system for automotive, electronics, and EMC applications. The system is housed in a mobile 19" industrial cabinet and consists of several testing and simulation modules, including control software. System Components AutoWave Serial Number: P2133255901 VDS 200Q100.2-400 Voltage Drop Simulator Serial Number: P2135256067 PFM 200N100.1 Serial Number: P2124253356 Software autowave.control V7.4.5 Software license included The software is used to control the AutoWave system and the connected components. Communication is via Ethernet. A laptop or PC is not included in the scope of delivery. Interfaces Ethernet IEEE 488 USB Frame Bus In / Out Analog In DC Output Connectors Chedpey Rlbhofx Agrjd CEE Power Connector Emergency Stop Switch Application Areas Automotive On-Board Network Simulation Voltage Drop Tests EMV/EMC Testing Electronics and Component Testing Research and Development Quality Assurance Technical Notes Four-Quadrant Voltage Drop Simulator Suitable for Automotive Testing Profiles Supports common testing standards such as LV124, LV148, ISO 7637-2, and ISO 16750. Output range according to documentation: -20 V to +80 V Bandwidth up to 250 kHz Condition Used equipment from industrial use. Optical condition, see pictures. The device can be switched on, displays are active. Scope of Delivery emtest / AMETEK testing system in an industrial cabinet AutoWave module VDS 200Q100.2-400 module PFM 200N100.1 module autowave.control V7.4.5 software Software license Connection and fan units Accessories as shown in the pictures Inspection possible by appointment. Loading can be arranged. Important Note: All information has been provided to the best of our knowledge based on the pictures, nameplates, and manufacturer information. We will be happy to answer further questions by telephone.

Condition: new, Year of construction: 2026, functionality: fully functional, warranty duration: 12 months, input voltage: 230 V, measuring range X-axis: 200 mm, measuring range Y-axis: 85 mm, measuring range Z-axis: 50 mm, total width: 483 mm, total length: 598 mm, total height: 464 mm, overall weight: 64 kg, input current: 5 A, repeat accuracy: 0.005 mm, input frequency: 50 Hz, Equipment: CE marking, USB port, documentation/manual, type plate available, PG1000-400 – Optical system for inspecting the geometry of rotating cutting tools PG1000-400 is a professional optical measuring and inspection system for quickly checking the geometry of cutting tools. It is designed for tool manufacturers, sharpening shops, grinding shops, tool rooms, CNC machining centers, and quality control/metrology departments. Its main application is the inspection of rotating cutting tools after manufacturing, grinding, sharpening, or reconditioning. The system is suitable for HSS and solid carbide tools, especially drills, end mills, step drills, reamers, taps, form tools, micro tools, and custom-made tools. The device can also be used to inspect carbide inserts, selected thread geometries, screws/bolts, and other precision parts, provided that the geometry being inspected is optically accessible to the camera. The system's primary focus is on the inspection of cutting tool geometry. Typical applications: - In-process inspection directly at the grinding machine or in production - Incoming and outgoing inspection of tools - Inspection after sharpening/regrinding - Quality documentation and measurement reports Chjdpjzdz S Tsfx Agrsd - Repeated inspection of serially produced tools PG1000-400 allows for the inspection of, for example: - Rake angle and clearance angle - Helix angle - Point angle for drills - Radii and corner radii - Diameters and distances - Cutting edge length - Land width, margin width, facets - Web thickness - Tool profile - Runout - Condition and wear of the cutting edge - Comparison of geometry with DXF/DWG drawings The system operates optically and non-contact. This is advantageous when inspecting sharp edges, fine microgeometries, coated tools, and precise edges, where speed, repeatability, and minimizing operator influence are important. The system includes REACTION software, developed specifically for the inspection of cutting tools. The software offers more than 50 measuring functions, edge detection, automatic alignment of measuring points to the edge, saving inspection scenes, comparison with DXF/DWG geometry, PDF reports with PASS/FAIL evaluation, and data export to Excel/CSV. Technical specifications: - Recommended tool diameter: 0.635–75 mm - Tool measuring length: approx. 190–200 mm - Magnification range: 12.5× to 145× - Camera: 5 MP - Monitor: 27" 4K Ultra HD - Measuring range: 85 mm vertically × 200 mm horizontally - Accuracy/repeatability: ±5 µm at maximum magnification - Device dimensions: approx. 598 × 483 × 464 mm - Weight: approx. 64 kg Offered configuration: - PG1000-400 optical cutting tool inspection system - M / F / A encoders - PC with REACTION software - 27" 4K Ultra HD monitor - Flexible LED lighting with diffuser - Curved magnetic diffusion plate - Rotating base block for clamping fixtures - 1000-026-5"-ASS – 5" V-block assembly with insert, top clamp, and stop - Basic remote operator training About the manufacturer: PG1000 is based on the long-term development of systems for inspecting cutting tools. The first generation of PG1000 was introduced in 1993. The system is manufactured in the USA by PG Inspection Technologies LLC, which specializes in this product line. Since 1996, more than 1000 PG1000 systems have been delivered. Condition and delivery: - New machine - Year of manufacture: 2026 - Warranty: 12 months - Location: Czech Republic / EU - Delivery, assistance with commissioning, and training according to agreement - CE marking and relevant EU documentation The device i

Condition: used, FRT MicroSpy Device Designation: FRT MicroSpy Mobile Art. No. MSP 105 00 Device Number: MSP1033 FRT MicroSpy Mobile Portable Optical Profilometer for non-destructive 3D surface measurements directly on the component. Due to its portability, the MicroSpy Mobile is ideally suited for mobile use on large machines, vehicles, rollers, glass panes, or other large components. This enables high-resolution and non-destructive measurements on-site to determine important characteristics of surfaces, such as roughness, contour, topography, layer thickness, wear, load-bearing capacity, or volume. Smaller samples can be measured directly on the measuring table. Usable on large construction and machine parts Excellent resolution values Excellent reproducibility Non-destructive measurement Handles and adjustable support feet Low weight (approx. 5 kg) FRT Technical Specifications: Device: MicroSpy Mobile xy-travel range: 50 x 50 mm² xy-table Type: compact XY cross table with open frame Bearing: mechanical crossed roller guide Drive: DC motor with ball screw Travel range (XY measuring range): 50 x 50 mm² (or 20 x 20 mm² with CWL 3mm) Position measuring system: rotary encoder Measuring system resolution: 0.25 µm XY repeatability: < ± 1 µm Table height deviation (per axis): < 2 µm / 50 mm (of which is not reproducible): < 0.5 µm XY squareness: < 4 µm / 50 mm z-axis, motorized: Type Position Drive Travel range Position measuring system Measuring system resolution Axis straightness Gross adjustment, manual: Type: dovetail guide with fine drive Adjustment range: 25 mm Measurement: Minimum point spacing xy: 1 µm Sample size: - Sample weight: - Min. measuring speed: 1 µm / sec Max. measuring speed: 50 mm / sec Overall system: Total weight: approx. 150 kg of which measuring unit: approx. 5 kg Footprint measuring unit: approx. 0.3 x 0.3 m² Dimensions controller (W x D x H): approx. 0.65 x 0.65 x 1.0 (1.6) m³ Voltage supply EU version: 110 - 240V, 50 - 60Hz, z 16A Voltage supply US version: 110 - 240V, 50 - 60Hz, z 16A Power consumption: typ. 300-400 W Compressed air supply: - Ambient temperature: 22°C ± 5°C Temperature stability: < 0.5°C/h Environmental conditions: measuring room Scope of delivery: 1 x XY table with 50 x 50 mm² travel range 1 x Mobile base with electronics 1 x Chromatic sensor FRT CWL 600 µm 1 x Electronics for chromatic sensor 2 x Keys for computer 2 x Keys for rear door 1 x Power cord for power supply 1 x Mouse (PS/2) 1 x Keyboard Chedozdnqcopfx Agrsd 1 x 19'' TFT monitor Type: FRT MicroSpy Mobile Condition: used Scope of delivery: (See picture) (Changes and errors in the technical data are subject to change!) We will gladly answer any further questions you may have by telephone.

Condition: used, Internal precision measuring instrument, 2-point internal precision measuring instrument set, borehole measuring instrument Manufacturer: Mitutoyo Used Measuring range [mm]: 18-150 Testing equipment in original packaging Codpezul Hvefx Agrohd 2 units available, each in its original case Case contents are not complete; does not include a dial indicator. Price: Negotiable Our asking price for 1 unit is €330.00 net, ex works, plus packaging costs. All technical data is subject to typographical errors and omissions. Sale exclusively to countries within the EU.

Condition: new, Year of construction: 2018, functionality: unexamined, Yokogawa ROTAMASS Supreme Coriolis Mass Flow Meter in excellent condition. Specifications: Manufacturer: Yokogawa Model: ROTAMASS Supreme Sensor model: RESSC38A10 Converter model: RCCS-25BA10-0C70-SF22-A-B1 Size: DN25 (1") Power supply: 24 VDC ATEX / Explosion-proof Stainless steel construction Year: 2018 Codpfozrigujx Agrjhd Complete with transmitter Ready for installation The unit is sold as is, where is, without any warranty. Delivery terms: EXW Rotterdam, The Netherlands, loaded onto your truck.

Condition: good (used), Year of construction: 2011, Programmable universal temperature transmitter – used: Price per unit, ex warehouse: €95 (net)! Manufacturer: Endress+Hauser Type: TMT181-A Year of manufacture: 2011 Order code: TR88-AB4C1E2G3000 Serial number: E301AC14158 1x Pt100/TF/4 CLA -50...250°C Measuring range: -50..400°C IP66/1P68 Chjdpoz Sdx Eofx Agrjd NEMA IX TYPE 4X ML = 260 mm Available quantity to be determined Condition: good Available: immediately Location: Bünde, North Rhine-Westphalia

Condition: used, Year of construction: 2005, functionality: fully functional, machine/vehicle number: 3164, TESA Scan 50 plus – Optical/Tactile Shaft Measuring Machine Year of manufacture: 2005 · Diameter range: 0.5 – 50 mm · Measuring length up to 500 mm · Resolution: 0.1 µm · Complete with Dell PC, monitor, keyboard, and mouse TECHNICAL DATA • Manufacturer: TESA (now part of Hexagon Metrology) • Model: Scan 50 plus • Year: 2005 • Measuring principle: Combined optical + tactile (contactless and tactile measurement) • Diameter measuring range: 0.5 – 50 mm • Length measuring range: 500 mm • Diameter resolution: 0.1 µm • Length resolution: 0.5 µm • Diameter error limit (20 °C ± 1 °C): 1 + D[mm] / 100 µm • Length error limit (20 °C ± 1 °C): 4 + L[mm] / 100 µm • Diameter repeatability: 0.5 µm • Length repeatability: 2 µm • Max. workpiece (D × L × m): 100 mm × 515 mm × 6 kg • Space requirement: approx. 1.3 × 0.8 × 1.2 m • Device weight: approx. 180 kg • Item no.: 3164 SOFTWARE • Pro-Measure (licensed) • Pro-Composer (licensed) SCOPE OF DELIVERY • TESA Scan 50 plus measuring device • Dell control PC • Monitor • Keyboard • Mouse Chjdpfxjy Eqlxe Agred CONDITION & HIGHLIGHTS Pre-owned device, fully functional • Precision measuring device from ongoing production • Software Pro-Measure / Pro-Composer included (licensed) • Ideal for turned parts, shafts, precision journals, and rotationally symmetric test parts • Supplied complete with Dell PC, monitor, and input devices – ready for immediate use MARKET COMPARISON Original purchase price approx. €40,000. ABOUT THE DEVICE The TESA Scan 50 plus is a high-precision optical-tactile shaft measuring machine for measuring rotationally symmetric workpieces such as shafts, turned parts, precision journals, pins, and similar test pieces. The device combines non-contact optical measurement with tactile probes, achieving a resolution of 0.1 µm for diameters and 0.5 µm for lengths. TESA (Switzerland) is now part of the Hexagon Metrology Group – a world-leading supplier of industrial metrology solutions. The Scan 50 plus is typically used in quality control labs, metrology departments in fine and small batch production, as well as in research and development. LOCATION & TRANSPORT Location: Central warehouse at Auktionshaus Köck, 6178 Unterperfuss, Austria. Self-collection or shipping by freight forwarder by arrangement. Transport costs on request. All information is provided without guarantee. Used device – sale is made to the exclusion of any warranty. Errors and misprints excepted.

Condition: new, Year of construction: 2025, Yokogawa ROTAMASS Coriolis Mass Flowmeter – New Surplus New and unused Yokogawa ROTAMASS Coriolis flowmeter, supplied in original packaging. Suitable for accurate mass flow and density measurement in industrial process applications. Technical details: Manufacturer: Yokogawa Product: ROTAMASS Coriolis Flowmeter Model: RCCP25-15BA10-0C70-KF22-4-JB1 Serial No.: D12402169 Year of manufacture: 2025 Manufacturing date: 04/2025 Size: 15 mm Process connection: DN15 Pressure rating: PS 19 bar Temperature range: -40°C to +150°C Ambient temperature: -40°C to +60°C Communication: HART (4–20 mA) Supply: 24 VAC or 100–240 VAC, 50/60 Hz Enclosure: IP66/67 Ex / hazardous area approved Made in Germany Codpfx Agjz A Ddmorshd Tag No.: 20FC-028 Condition: New / unused surplus equipment. The unit is supplied in its original packaging with documentation as shown in the pictures. Availability: 1 unit available. Location: Rotterdam, The Netherlands Delivery: Worldwide shipping can be arranged. Price: On request

Condition: good (used), Length measuring system – SIP – Société Genevoise d’Instruments de Physique Type/Model: SIP 300 M Condition: Used Year of manufacture: 2001 Technical data: Design: Motorized length measuring bench Measuring range: 300 mm Measuring system: Original steel scale Measuring accuracy/uncertainty: 0.25 µm Chedpfez Nv Dmsx Agred Motorized: Yes Accessories: - Various accessories as shown in the images Request item: Transportation costs will be provided in a separate quote.

Condition: used, functionality: fully functional, Geosig Accelerometer with recorder GeoSIG GMS plus Recorder model no GMSplus-IP67 Geosig Accelerometer/sensor Model AC73 Type HHV Chedpfoq S Uz Uex Agrod Vibration sensor and Recorder including accessories as shown in the photos. This Vibration sensor and Recorder is used. We have a stock of approximately 100 used sensors and 100 used recorders available.

Condition: ready for operation (used), Year of construction: 2012, MarSurf M400 MarSurf SD 26 Mahr roughness measuring device with evaluation unit Brand: MAHR Model: MarSurf M 400 Touch probe: Free touch probe Measuring range roughness: +/- 250 µm, +/- 750 µm Scanning distance min.: 1.75 mm Scanning distance max.: 17.5 mm Cut-off wavelength: 0.25 mm, 0.8 mm, 2.5 mm Measuring profile memory (number of individual values): 40000 STK Measuring profile memory (number of profiles): 30 ST New price: 11.190 € net - Bluetooth connection between the feed unit and the display unit. - Measure in all directions horizontally, vertically and overhead. You are welcome to visit us for an inspection. You will receive a proper invoice. A net invoice can also be issued for foreign customers. Prerequisite is a valid VAT number. Subject to prior sale. Visit our store and have a look at our other offers. Company names and trademarks are the property of their owners and are used only to identify and describe the products. Cedpfx Ageq Nl Ewsrshd Deviations from technical data and errors in the description of the article may occur and are reserved.

Condition: ready for operation (used), Year of construction: 2022, A Scantech thickness gauge is available. Measuring frame: 5500mm, measuring width: 5200mm, material: PU/acrylate/EVA coating, backing: polyester/cotton, max. basis weight: 600g/m², parallel accuracy: less than 0.2mm, measuring gap: 60mm-80mm, web speed: 550m/min. Sensor XT10: PP: 2g-2000g/m², accuracy: +/-0.1%, resolution range: 2mm-10mm. The machine has never been used. Documentation available. On-site inspection is possible. Chodpfxju Rp Hye Agred

Condition: used, Year of construction: 2013, machine/vehicle number: 2690/07, Mahr Perthometer PGK 120 Measuring range: 100 [x in mm] Max. load capacity: 10 kg with cross table Probe system: MFW-250 (measuring range: in z ±0.25 mm) Measuring principle: tactile-inductive Contact forces: 1–3 mN Probe: roughness probe (tip radius 2–5 µm, opening angle 60° and 90°) Chodpfx Agjy D Eadjrod

Condition: new, Magnetic position transmitter / sensor. (Measuring range: 160 mm). Chodpfj Afdu Rex Agrjd

Condition: ready for operation (used), Year of construction: 2019, A total of five structurally similar Coriolis mass flow meters Krohne are available, four of which are unused. Transmitter: MFC 400 F, process temperature min./max.: -70°C/150°C, operating pressure range: 5bar-10bar, communication: Profinet, current fluid density: 0.9kg/l, viscosity: 300mPas, temperature: 120°C, max. pressure: 10bar. 1) Sensor: Optimass 6000-S08, connection DN15 Tri-Clamp, installation length: 305mm, max. measuring range: 0l-300l/h, max. fluid temperature: 230°C. 2) Sensor: Optimass 6000-S08, connection DN15 Tri-Clamp, installation length: 305mm, max. measuring range: 0l-60l/h, max. fluid temperature: 230°C. 3) Sensor: Optimass 6000-S08, connection DN15 Tri-Clamp, installation length: 305mm, max. measuring range: 0l-60l/h, max. fluid temperature: 230°C. 4) Sensor: Optimass 6000-S10, connection DN15 Tri-Clamp, installation length: 315mm, max. measuring range: 0l-200l/h. 5) Sensor: Optimass 6000-S15, connection DN25 Tri-Clamp, installation length: 480mm, max. measuring range: 0l-1500l/h. Position 5 was installed solely for testing purposes. Documentation available. An on-site inspection is possible. Chedpoyiflajfx Agrsd

Condition: new, functionality: fully functional, The Trimos V1+ is the enhanced version of the proven V1 and is ideal for users who want to combine maximum precision with straightforward operation. It offers all the benefits of the V1, with the addition of bidirectional measurement capability for diameter, centerline, and comparative measurements—a true advantage over conventional entry-level models. Manufactured in Switzerland, the V1+ stands for quality, durability, and outstanding repeatability. It is perfectly suited for use in workshops, inspection rooms, and production environments. Thanks to its ergonomic design, stable base, and sensitive guidance, the V1+ can be operated precisely and safely. The constant measuring force ensures consistently reliable results. V1+ models: V1+ – 300 Measuring range (mm): 306 Accuracy (mm): 0.015 Chodpfxjxu T Egj Agrjd Repeatability (mm): 0.005 (Ø: 0.01) Resolution (mm): 0.001 Measuring force (N): 3 Autonomy (h): 2000 Max. travel speed (mm/s): 1500 Weight (kg): 7 (steel base) / 13.4 (granite base)