Used measuring systems for sale (292)

Condition: like new (used), total width: 20 mm, total length: 24 mm, total height: 16 mm, Liquiline CM442 Controller, ENDRESS HAUSSER - IND27827-OC - 063 Liquiline CM442 is a state-of-the-art transmitter for measuring parameters such as pH, redox, conductivity, oxygen, chlorine, turbidity, sludge level, COD, nitrate, etc. The Liquiline CM442 transmitter allows you to connect up to 2 Memosens sensors of your choice from more than 12 measurement parameters. It automatically recognizes the sensors, is easy to operate, and features standardized spare parts that are compatible with other devices in the Liquiline platform. With its inputs, outputs, controllers, and mathematical modules, you can even control cleaning systems and dosing pumps. Heartbeat Technology helps to find the ideal balance between the availability of the measurement point and maintenance costs. Liquiline CM442 is suitable for all industries and their auxiliary applications, such as: Food and beverage Life sciences Power plants and energy Water, wastewater, and waste Chemicals Marine It features the following communication protocols and interfaces: 0/4 ... 20 mA HART PROFIBUS DP Modbus RS485/RTU Modbus TCP EtherNet/IP PROFINET Web server The transmitter can be expanded with a module whose approvals for explosion protection, such as IECEx, ATEX, and CSA, allow it to be connected to sensors installed in areas with a risk of explosion. Advantages Intelligent Simplicity: one controller for all parameters and applications, with an intuitive user interface, automatic sensor recognition, and plug & play hot-swapping with pre-calibrated Memosens sensors. High Flexibility: universal modules for all parameters minimize spare parts inventory and allow the system to be expanded at any time with up to 8 channels. Direct Integration into the System: the unique portfolio of communication standards adapts to any distributed control system (DCS). Simple and Safe Commissioning: the ability to save the configuration to an SD card allows for quick commissioning of duplicated installations. Remote Process Control: integrated web server that allows the operator to remotely view diagnostic data, perform configurations, or access the equipment parameters from any web browser, even from a smartphone. Higher Availability, Lower Costs: Heartbeat Technology enables condition-based maintenance and simple verification of the complete measurement point, in addition to helping you take optimization measures. Promoting Connectivity: Liquiline Edge Module CYY7 transfers process data to Netilion, regardless of the fieldbus. This allows for an overview and the use of IIoT services. It is available in new products or as an upgrade for installed Liquiline platforms. Summary of Specifications Input Codpfxoz Tl Rkj Agrshd 1 to 2 digital Memosens inputs Output / Communication 2 to 4 current outputs of 0/4 to 20 mA Alarm relay, 2 relays Ingress Protection IP 66 / IP 67 Additional Certificates EAC, cCSAus, MCERTS

Condition: used, For sale: PREWI industrial measuring table designed for dimension control of furniture components, panels, and carpentry parts. Technical data: - Measuring area: 2800 × 1050 mm, Z = 65 mm - Digital readout: HEIDENHAIN ND 5023 3X - Measurement in 3 axes - Stable industrial construction - Complete guides and measuring system - Accuracy: Absolute accuracy X/Y +/- 0.10 mm - Typical repeatability X/Y +/- 0.02 mm - Relative accuracy Z +/- 0.05 mm - Typical repeatability Z +/- 0.02 mm - Resolution: 0.01 mm Condition: - Machine is in working order - Inspection possible before purchase - Digital readout functions correctly - No technical documentation available Applications: - Dimension control of furniture panels - Measurement of furniture fronts - Verification of components after CNC machining - Quality control of production The machine is currently in a production facility and is ready for further operation. Cjdpezc Hwyefx Agrjhd Inspection and testing of the machine are possible on-site by prior arrangement. For technical questions regarding the measuring table, please call Andrzej at 789 487 841.

Condition: used, For sale is a modular test and measurement system from National Instruments, based on the PXI Express platform. The system was originally purchased in 2016 and subsequently expanded in 2018. The device can be used for test automation, multi-channel data acquisition, quality control, GigE camera support, and communication with industrial devices. Current configuration: National Instruments PXIe-1085 – 18-slot PXI Express 3U chassis with a system throughput of up to 24 GB/s, National Instruments PXIe-8880 – embedded PXI Express controller with a 64-bit Windows 7 operating system, 2 × 8 GB RAM expansion for the PXIe-8880 controller, 6 × National Instruments PXIe-8234 – dual-port GigE Vision modules designed for image acquisition from industrial cameras, National Instruments PXIe-4499 – 16-channel, 24-bit module for sound and vibration measurements, 204.8 kS/s, with IEPE and TEDS support, a complete set of two InfiniBand–BNC cables for the PXIe-4499 module, National Instruments PXIe-4357 – 20-channel, 24-bit temperature measurement module for RTD sensors, National Instruments TB-4357 – terminal block for the PXIe-4357, National Instruments HDD-8261 – 6-disk, high-speed SSD data storage module with a total capacity of 2.9 TB according to the original configuration, National Instruments PXIe-7846R – reconfigurable I/O module with a Kintex-7 160T FPGA, equipped with 8 analog inputs, 8 analog outputs, and 48 digital I/O lines, National Instruments SCB-68A – shielded terminal block, shielded 68-pin terminal block for R Series DIO and HSDIO devices, 2 m SHC68-68-RMIO cable, shielded 2 m R Series High Speed Digital Cable, power cable. Additionally added: NI PXI-6224 M Series Multifunction DAQ – 32 analog inputs and 48 digital I/O lines 12 × NI 8234 Dual Gigabit Ethernet Controller for Windows – a total of 24 Gigabit Ethernet ports NI PXI-8433/2, 2000 V Isolated RS422/485 – isolated, dual-port RS422/RS485 interface Possible applications: - Multi-camera GigE Vision systems - Automated quality control - Testing of electronics and components - Acquisition of analog and digital signals - Communication via Gigabit Ethernet, RS422, and RS485 Cjdpjzv Idtefx Agrjhd - Research and development workstations - Automation of production tests The devices were purchased as part of a single, complete National Instruments system. Original purchase documentation is available for review. The system was used in research and development activities related to electronics, vision systems, metrology, and automation. Technical and visual condition as shown in the photos. Detailed catalog numbers and serial numbers of individual devices can be provided upon request. Sale of the complete system is preferred. Sale of selected modules is also possible after prior arrangement.

Condition: used, functionality: fully functional, In this listing, you are purchasing a second-hand ‘Keyence VL-500’ 3D coordinate measuring machine Items for sale: 1x Keyence VL-500 with the following features Includes software Includes additional software Includes a laptop for operation Includes a calibration plate Ready for immediate use Condition: This listing is for a second-hand device, which may show signs of wear (minor scratches or discolouration). Cedey Iaa Tepfx Agrshd The unit has been tested to ensure it is in working order Packaging and dispatch: You are welcome to view the unit during our business hours. Please arrange an appointment to do so! Seaworthy packaging and worldwide dispatch available on request! A functional test will be recorded on video for you prior to dispatch or collection. For further information, you are of course welcome to contact us directly.

Condition: used, Year of construction: 2021, Available in OEM version without manufacturer markings on the housing, or with markings. Price per unit; 15 units in stock (including OEM version – 13 units in stock). The Opto Engineering TC23144 is a professional bi-telecentric lens designed for use in machine vision systems, metrology, and precision measurement applications. Its bi-telecentric design ensures a constant magnification regardless of the object distance, minimizing perspective errors and image distortion. This makes the TC23144 model ideal for quality control systems, dimensional measurements, and automated industrial inspection. The lens is compatible with cameras equipped with sensors up to 2/3″ and offers a magnification of 0.061x and a C-mount. It is characterized by very high telecentricity, low distortion, and a large depth of field, which allows for repeatable and accurate measurement results, even in demanding industrial environments. Applications: - Machine vision systems, - Quality control and production inspection, - Industrial metrology, - Dimensional measurements, - Industrial automation, - Research and development (R&D) laboratories. Key parameters: Manufacturer: Opto Engineering Model: TC23144 Type: Bi-telecentric lens Maximum sensor size: 2/3″ Magnification: 0.061x Mount: C-Mount Working distance: 396 mm Working aperture: f/8 Telecentricity: < 0.05° Distortion: < 0.04% Front diameter: 200 mm Weight: approx. 5.8 kg The device was used in applications related to vision systems and industrial measurements. Cedpfx Agszi S Ivsrjhd If you have any questions or need further information, please send a message or contact us by phone.

Condition: like new (used), Year of construction: 2024, bolt circle diameter: 2,500 mm, FARO Quantum X.S Max 2.5m – 2024 + PolyWorks|Inspector Probing A very recent FARO Quantum X.S Max 2.5m from 2024 – complete with ISO 10360 calibration, PolyWorks|Inspector, and training. Are you looking for a high-quality, accurate, and flexible mobile 3D measurement solution? This FARO Quantum X.S Max 2.5m offers a complete solution that allows you to get started right away. The Quantum X.S Max was manufactured in 2024 and is the high-end Max version within the FARO Quantum series. The arm is offered in a probing configuration and is delivered complete with PolyWorks|Inspector™ for tactile 3D measurements and training. Specifications Manufacturer: FARO Model: Quantum X.S Max Year of manufacture: 2024 Measurement range: 2,500 mm Version: 7-axis measuring arm Configuration: Tactile Probing 3 mm iProbe 6 mm iProbe Original transport case FARO Fold tripod Mounting plate Calibration set Power supply/battery and accessories Calibrated according to ISO 10360 The FARO Quantum X.S Max is calibrated according to ISO 10360 before delivery. With this, you will not just receive a used measuring arm, but a professional measurement solution whose performance is checked and documented before delivery. Chjdpfx Aozvyxpegrsd Including PolyWorks|Inspector version 2026 The measuring arm is delivered with PolyWorks|Inspector for probing, which provides you with a powerful and user-friendly software environment for, among other things: Dimensional and geometric inspections GD&T checks Alignments CAD-to-part inspections Graphical measurement reports Digital inspection reports Repeat measurements and series inspections Training included Training is included with the purchase of this complete solution. During the training, the user will receive practical guidance on working with the FARO measuring arm and PolyWorks|Inspector. This allows you to quickly and effectively use the combination within your own measurement environment. Complete measurement solution You will receive: FARO Quantum X.S Max 2.5m + 3 mm & 6 mm iProbe + FARO Fold tripod + ISO 10360 calibration + PolyWorks|Inspector Probing + Training One complete package, so you can start professional mobile 3D measurements right away. Why choose this combination? Very recent measuring arm from 2024 High-quality Quantum X.S Max version Practical measurement range of 2.5 meters Calibrated according to ISO 10360 Including PolyWorks|Inspector Including training Complete hardware and software solution An interesting alternative to investing in a completely new system A complete, professional mobile measurement solution for a significantly more attractive investment than a new one. Contact us for price, availability or more information.

Condition: used, An automated acid hydrolysis system for fat determination with 6 sample positions is offered. Sample configuration: 3 chambers with 2 tubes each. Degree of protection: IP20. The system is designed for automated acid hydrolysis for fat determination. The process takes place in an enclosed room. Inspection possible by prior arrangement. Cedpfxoz Sr I Hj Agrohd

Condition: excellent (used), functionality: fully functional, Mitutoyo Microscope Head, FS70Z Model: FS70Z Condition: Used Cjdozh I R Repfx Agrshd General: 1X/2X focus distance, 50mm laser video microscope housing (FS70Z), Mitutoyo-378-185-1 Accessories: Documentation

Condition: excellent (used), Year of construction: 2020, machine/vehicle number: 2299.001, For sale is a high-quality Modular Mass Production Tester (MPT) from NTS Optel – a professional testing and measurement system designed for automated quality control of optical components such as wafers, sensors, or micro-optics. This machine was developed for precise high-volume inspection of optical components and delivers the highest measurement accuracy, reliability, and flexibility for industrial applications. Thanks to its modular design, the tester can be perfectly adapted to specific production or development requirements. 🔍 Features & Equipment • Integrated laser module (940 nm, circularly polarized) for precise optical illumination • High-resolution camera with automatic calibration and large field of view • Robot-based wafer handling (EFEM) for automated loading and unloading • Analysis software for evaluating efficiency, contrast, uniformity, and performance • CE-certified, including safety interlock and cleanroom-compatible design • User-friendly control via touchscreen and integrated GUI system • Connectivity for LAN, power, and compressed air (6 bar) ⚙️ Technical Advantages Csdpfx Agey R Dzgsrohd • Automatic image capture and evaluation of test specimens (DUTs) • Supports customer-specific software modules (DLLs) • Low maintenance, robust construction, high operational reliability • Optional: Z-axis control and wafer flip station 💡 Applications Ideal for research, development, quality assurance, and series production in the following sectors: • Optoelectronics • Sensor manufacturing • Semiconductor technology • Microsystem technology

Condition: used, Shimadzu Type: AG-X plus 20kN-50kN +750mm Dimensions: W 1206 x D 765 x H 2920 mm Technical data: Fmax: 50 kN Speed: 0.00005~1500 mm/min Accuracy: ±0.1% JIS B7742 Class 0.5, ASTM E2658 Class A Crosshead-table distance (mm) (tensile stroke)*3: 215 to 1940 (20 kN: 0 to 1535 mm, 50 kN: 0 to 1475 mm) Possible test width: 600 mm Frame stiffness: 180 kN/mm 710 kg 200 V 4.5kVA/15 A Chodpfxszimkfe Agrod + Accessories as shown in the picture Condition: used Scope of delivery: (See picture) (Changes and errors in the technical data and specifications are subject to change!) We will be happy to answer any further questions you may have by telephone.

Condition: good (used), Length measuring system – SIP – Société Genevoise d’Instruments de Physique Type/Model: SIP 300 M Condition: Used Year of manufacture: 2001 Technical data: Cedpez Nv Dmjfx Agrehd Design: Motorized length measuring bench Measuring range: 300 mm Measuring system: Original steel scale Measuring accuracy/uncertainty: 0.25 µm Motorized: Yes Accessories: - Various accessories as shown in the images Request item: Transportation costs will be provided in a separate quote.

Condition: used, Keyence Type: VR-5200 + VR-5000 3D profilometer. Technical data: Observation and measurement range: Horizontal: mm 24.0 12.0 8.0 6.0 7.6 3.8 2.5 1.9 Vertical: mm 18.0 9.0 6.0 4.5 5.7 2.9 1.9 1.4 Measurement resolution 0.1 μm: Height measurement: Height measurement range without image stitching in Z: 10 mm 1 mm With image stitching in Z: 50 mm 30 mm Repeatability (σ)*1 without image stitching in Z: 0.4 µm With image stitching in Z: 1.0 µm Width measurement: Measurement accuracy*1 without image stitching in Z: ±2.5 μm With image stitching in Z: ±4.0 μm Repeatability (σ) *1 1 μm 0.5 μm Measurement accuracy*1 ±5 μm ±2 μm XY travel: 184x88 mm Z travel: 73 mm Includes: Control unit VR-5000 + software with licenses For sale from our location! Condition: fully functional + no signs of wear Csdpfozd Uhzox Agrohd For further technical information, please refer to the manufacturer. Scope of delivery: (As shown in the picture) (Changes and errors in the technical data are subject to change!) We would be happy to answer any further questions you may have by telephone.

Condition: ready for operation (used), Year of construction: 2021, A stationary Brabender residual moisture and moisture content measuring device is offered. Relative measuring range: 0.0001%H₂O-15%H₂O, absolute measuring range: 0.01mgH₂O-15mgH₂O, moisture content resolution: 0.01mg, resolution: 1ppm, relative resolution: 0.0001%H₂O, measuring temperature range: 30°C-160°C, temperature setting: in 1°C increments, sample weight: approx. 0.05g-20g, max. sample volume: approx. 50cm³, accuracy: better than approx. 0.6mg, ambient temperature: +10°C to +45°C, relative humidity: 5%-95%, storage temperature: -20°C to +55°C, relative humidity: 5%-95%, measuring distance: approx. 1m, measuring height: approx. 1.6m. Dimensions X/Y/Z: 562mm/420mm/275mm, weight: 27.6kg. Documentation available. Inspection possible by appointment. Chedpfx Aszli Uregred

Condition: ready for operation (used), Year of construction: 2015, A mobile 3D measuring system from FARO is offered for sale. Measuring arm: FARO Edge, year of manufacture: 2015, revision: 3.9. Laser scanner: FARO LLP HD, year of manufacture: 2015, revision: 3.2. Single Point Articulation Specification: 0.0290mm, Effective Diameter Specification: 0.0145mm, Volumetric Specification: 0.0410mm. Measured maximum Single Point deviation: 0.0254mm, measured maximum Effective Diameter deviation: 0.0020mm, measured maximum Volumetric deviation: 0.0217mm. Calibration date of measuring arm: 17 April 2024. Calibration date of laser scanner: 12 April 2024. Includes FARO LLP HD Laser Line Probe, transport case, stand and accessories. Documentation available. An on-site inspection is possible. Codpfxsztduis Agrehd

Condition: ready for operation (used), Garant HC 1 Height Measuring Device Measuring range: 600mm Dimensions: 240mm x 250mm x 1000mm (L x W x H) Weight: approx. 30 kg Calibration standard is not included in the scope of delivery. For further technical data, please refer to the images. You are welcome to arrange a viewing appointment. We are happy to organize affordable shipping for you! Csdpsxv Ampjfx Agrehd You will receive a proper invoice. For international customers, a net invoice can also be issued, provided a valid VAT identification number is supplied. Subject to prior sale. Visit our shop and browse our other listings. All brand names and trademarks mentioned are the property of their respective owners and are used for identification and descriptive purposes only. Technical data may vary and errors in the description of the item are possible and reserved.

Condition: like new (used), Year of construction: 2020, functionality: fully functional, machine/vehicle number: 62286233, measuring range X-axis: 400 mm, measuring range Y-axis: 400 mm, measuring range Z-axis: 200 mm, total width: 1,303 mm, total length: 776 mm, total height: 1,004 mm, overall weight: 324 kg, workpiece weight (max.): 20 kg, Equipment: documentation/manual, 📏 As New Mitutoyo QV Active 404 CNC Vision Measuring System for Sale – High-Precision, Non-Contact Metrology Upgrade your inspection capabilities with the Mitutoyo QV Active 404, a cutting-edge CNC vision measuring system designed for fast, accurate, and repeatable 2D and 3D non-contact measurements. This used unit offers premium Mitutoyo performance at a cost-effective price—ideal for precision manufacturing, quality control labs, and R&D environments. Condition: Never Used – Still in original crates 🔧 Product Overview – Mitutoyo QV Active 404 The Mitutoyo Quick Vision Active 404 is part of Mitutoyo’s renowned Quick Vision series, combining fast automatic measurement, superior accuracy, and flexible lighting systems. It’s equipped with CNC stage movement, a high-resolution camera, and QVPAK software, providing automated, high-accuracy vision-based inspection in one compact footprint. This machine is still in its original crates and is in as new condition, making it a perfect solution for any business requiring advanced metrology tools without the cost of new equipment. ✅ Key Features of the Mitutoyo QV Active 404 📐 Automatic 3-Axis Measurement (X/Y/Z) with CNC stage 🔍 Non-Contact Vision Measurement – Ideal for fragile or micro-scale parts 🧠 QVPAK Software – Industry-leading metrology software for automated routines, reporting, and part programming 💡 Advanced Illumination System – Includes ring light, coaxial light, and programmable sub-stage lighting 🔧 Motorized Zoom Lens for flexible magnification and measurement precision 🖥️ Real-Time Edge Detection for ultra-precise dimensional analysis 📐 Technical Specifications Measurement Range: X400mm / Y400mm / Z200mm Vision Head Range: 400x400x200mm Size of Stage Glass: 466x480mm Max Stage Loading: 20kg Resolution: 0.1 µm Accuracy (E1): ±(2.5 + 4L/1000) µm Touch Probe Accuracy: (2.4+3L/1000) µm Stage Type: Motorized CNC, granite base Camera: High-resolution digital CCD Lighting System: Multi-source - ring, coaxial, contour Magnification Change System: Zoom optical system with 8 positions Lens System: Motorized zoom Sensor Type: High resolution CMOS colour camera Software: Mitutoyo QVPAK Machine Dimensions: 776x1303x1004mm Weight including Stand: 324kg Chodewqrvlepfx Agrsd 🧰 Perfect For Precision component manufacturers Aerospace, automotive, medical device inspection Electronics & PCB measurement R&D and dimensional analysis labs Tool & die makers and high-accuracy workshops 📦 What’s Included Used Mitutoyo QV Active 404 CNC Vision Measuring System Machine Stand Work Station Master Ball Stand MCR Attaching Plate Calibration Ring QVPAK Software Dell Computer Wide Screen Monitor Printer Used Mitutoyo QV Active 404 for sale Mitutoyo vision measuring system CNC non-contact measuring machine QVPAK software system Pre-owned Mitutoyo CMM Vision metrology machine UK / EU Mitutoyo Quick Vision Active measuring device Notes: *Specifications are given in good faith but not guaranteed*

Condition: like new (used), Year of construction: 2021, functionality: fully functional, Model: VR-5200 Type: Measuring Head Light Sources Observation light source: LED ring light (red, blue, green) Measurement light source: White LED Control Unit: VR-5000 Observation and Measurement Range Macro Mode Chodpfx Ajyc Nmwegrod Magnification (based on a 15-inch monitor) 12×: Horizontal 24.0 mm Vertical 18.0 mm Magnification (based on a 15-inch monitor) 25×: Horizontal 12.0 mm Vertical 9.0 mm Magnification (based on a 15-inch monitor) 38×: Horizontal 8.0 mm Vertical 6.0 mm Magnification (based on a 15-inch monitor) 50×: Horizontal 6.0 mm Vertical 4.5 mm Micro Mode Magnification (based on a 15-inch monitor) 40×: Horizontal 7.6 mm Vertical 5.7 mm Magnification (based on a 15-inch monitor) 80×: Horizontal 3.8 mm Vertical 2.9 mm Magnification (based on a 15-inch monitor) 120×: Horizontal 2.5 mm Vertical 1.9 mm Magnification (based on a 15-inch monitor) 160×: Horizontal 1.9 mm Vertical 1.4 mm Zoom: 1× to 4× Height Measurement Measurement resolution: 0.1 µm Height Measurement Range Without Z image composition Macro mode: 10 mm Micro mode: 1 mm With Z image composition Macro mode: 50 mm Micro mode: 30 mm Repeatability (σ) Without Z image composition: 0.4 µm With Z image composition: 1.0 µm Measurement Accuracy Without Z image composition: ±2.5 µm With Z image composition: ±4.0 µm Width Measurement Repeatability (σ) Macro mode: 1 µm Micro mode: 0.5 µm Measurement Accuracy Macro mode: ±5 µm Micro mode: ±2 µm Image Composition Fully automatic measurement (automatic XY control + automatic Z focus), automatic assignment, automatic area setup Measurable XY range: 206 × 104 mm Object Table XY travel: 184 × 88 mm (motorized) Z travel: 73 mm (motorized) Load capacity: 4.5 kg Working distance: 75 mm Image Sensor 4-megapixel CMOS, B/W Transmitter Lens Dual telecentric lens ×2 Receiver Lens Dual telecentric lens Data Processing Dedicated PC as per KEYENCE specifications (Operating system: Windows 11 Pro) Power Supply Voltage: 100 to 240 V AC, 50/60 Hz Power consumption: Max. 200 VA Environmental Resistance Operating temperature: 15 to 30°C Relative humidity: 20 to 80% RH (no condensation) Weight: Approx. 28 kg (net measuring unit weight approx. 11 kg)

Condition: excellent (used), Year of construction: 2022, functionality: fully functional, machine/vehicle number: 113018006121, Equipment: documentation/manual, type plate available, Optical measuring system with the following objectives: 1900WD30, 800WD17, 400WD19, and 150WD11. Rotary unit with EROWA clamping system. Csdpfozwuxaex Agrehd Ring light, compatible with all objectives. Automated pick-and-place system with 24 positions, featuring the latest software packages: MetMax 4.0.1, Alicona Laboratory Measurement 11.0.1, and Inspect 2023. 2 Inspect licenses available as floating licenses. Automation Manager.

Condition: excellent (used), For sale is a complete, professional non-destructive testing (NDT) kit using the magnetic particle method (MT) from reputable brands Tiede and Blak-Ray, used in industrial quality control, welding, railway, and power industries. The equipment is fully functional, in very good technical and visual condition, and ready for use. The kit includes: • Tiede FSM-2 – magnetic field strength meter, measurement range ±400 A/cm, 9 V DC power supply • Blak-Ray J-221 – professional UV radiation meter for inspecting UV lamps in NDT testing • Field Indicator MAGNAFLUX – magnetic field indicator for quick induction checks • Measurement probe with cable • Calibration sample and auxiliary accessories • Glass cylinder for indicator fluid • Original transport case with protective foam Application: • Inspection of weld seams • Inspection of shafts, axles, and machine components • Testing of railway, power, and aerospace parts • Quality control in industrial production Cedpfx Agez Slhbjrjhd

Condition: used, functionality: unexamined, machine/vehicle number: OneAdvisor 800, Used Viavi OneAdvisor 800 network analyzer set in carrying case. Manufacturer: Viavi Solutions Model: OneAdvisor 800 Including, among other items: charging cable, optical connector cleaner, universal adapter, and documentation. Chodoxmh E Sjpfx Agrjd Manufacturer description: The VIAVI OneAdvisor 800 distinguishes itself with a sophisticated design and a multifunctional architecture that accommodates a wide range of test applications, effectively scaling to different user groups and deployments, including: General Purpose Spectrum Analyzer: Designed for laboratory and manufacturing environments, the OneAdvisor 800 serves as a robust RF testing tool. It provides comprehensive spectrum analysis capabilities, enabling precise measurement and analysis of RF signals across various frequency ranges. This is essential for regulatory compliance and optimizing RF performance across operating conditions. Fiber and Cable Verification: For radio and antenna system installations, the OneAdvisor 800 is critical for verifying fiber and cable connectivity. It performs thorough tests ensuring seamless integration and optimal functioning of these components. By validating fiber links and cable connections, it guarantees reliable signal transmission, improving overall system efficiency and reliability. Wireless Signal Quality and Coverage Assessment: For mobile network testing, the OneAdvisor 800 offers vital tools for evaluating signal quality and coverage. It conducts detailed measurements to assess signal strength, identify coverage gaps, and check network performance metrics. This supports network optimization, troubleshooting, and improved user experience by maintaining consistent connectivity and service quality. Detection and Location of RF Interference Signals: In wireless networks, the OneAdvisor 800 excels at detecting and pinpointing sources of RF interference. It uses advanced analysis to identify and locate signals that adversely affect network performance. Prompt identification allows for swift mitigation of interference, ensuring optimal network reliability and performance. Transport Network Validation: The OneAdvisor 800 extends its capabilities to validating transport networks, supporting bandwidth provisioning in Ethernet networks up to 100Gbps. It conducts in-depth tests for network throughput, latency, and packet loss, ensuring robust performance and adherence to service level agreements (SLAs). It also enables precision time protocol (PTP) validation, vital for synchronization in 5G radio X-Haul networks, ensuring smooth integration and operation of advanced 5G infrastructure. The VIAVI OneAdvisor 800 offers versatility and dependability, providing an all-in-one solution for diverse testing requirements across industries and user types. Its comprehensive features—ranging from spectrum analysis to interference detection and transport network validation—make it an essential tool for network performance optimization, quality assurance, and supporting next-generation communication technologies such as 5G.

Condition: excellent (used), Year of construction: 2021, Stacja pipetująca CyBi-FeliX z CHOICE Head, 8-channel Choice adapter 10-1000uL i 0,5-50 uL Rok produkcji: 2021 Marka: Analytik Jena Chjdpfxoumtkaj Agrjd Model: Cybio Felix Choice

Condition: as good as new (ex-display), Year of construction: 2025, functionality: fully functional, input voltage: 230 V, measuring range X-axis: 2,750 mm, measuring range Y-axis: 1,250 mm, measuring range Z-axis: 85 mm, overall weight: 2,600 kg, Measuring range: 2,750 x 1,250 mm Demonstration machine – subject to prior sale - Operating system: Windows 11 For measuring external dimensions and performing one-sided inspections of vertical and horizontal boreholes in plate-shaped workpieces. APPLICATION AREA: Tooling aid: Measurement of the first production part Sample inspection: Measurement of samples MEASUREMENT CRITERIA: Dimensions: Length, width, angle Borehole, vertical: Position, diameter, depth, borehole spacing Borehole, horizontal: Position, diameter, depth, distance to the top of the plate. (NOTE: Test pins or inserted dowels are required). Codpfx Agszr Udrsrshd Groove: Edge distance, width, depth Radius: Center point position, radius Flange: Width, depth Recesses: Width, edge distance Technical data: Workpiece length (X-axis) min./max.: 180 mm – 2,750 mm Workpiece width (Y-axis) min./max.: 50 mm – 1,250 mm (Note: the measurement of vertical and/or horizontal boreholes as well as grooves and flanges on the Y-axis is possible up to the position 1,150 mm) Workpiece thickness (Z-axis) min./max.: 5 mm – 85 mm NOTE: Other sizes available on request. Accuracy: +/- 0.1 mm Resolution: 0.01 mm (NOTE: Consistent lighting conditions are required to maintain accuracy - independent of daylight) Measuring plane: High-precision, ground granite plate 3,200 x 1,340 x 150 mm Working height above floor: approx. 1,000 mm +/- 50 mm Space required approx. L/W/H: approx. 5,000 mm / 2,000 mm / 1,700 mm Weight approx.: 2,400 kg + control cabinet including control panel approx. 200 kg Total electrical connection: 2500 W Compressed air connection: 6 bar Operating side: left Operating voltage: 230 V / 16 A – (CEE7/7) Network connection: RJ45 Ambient temperature: max. 35 degrees Celsius (NOTE: At higher temperatures, an air conditioning unit in the control cabinet is recommended – available as an option.) Subject to technical changes. The above performance data assumes that suitable workpieces are used. Scope of supply: ⦁ Automatic measuring table with 2-axis servo drive ⦁ Automatic camera height positioning ⦁ 1 x Software license CAD4U and Hecht interface for creating measurement programs on a PC in the preparation area ⦁ 19" PC with CAD4U software license and interface for creating measurement programs, current software version Results and driver for measurement program execution, image processing software ⦁ Camera, lens and lighting for image acquisition ⦁ Operating system Windows Ultimate 64-bit ⦁ Rittal PC cabinet 600x1600x650 mm (W x H x D) ⦁ Test pins for measuring the lateral boreholes: 10 pieces each with diameters 5, 6, 8 ⦁ 4 x right-angle brackets for black parts ⦁ SQL Express database installed on the machine computer Languages: The operating software is available in the following languages: German, English, French, Italian, Spanish, Flemish, Polish, Lithuanian, Russian and Chinese. Other languages available on request. SAFETY AND PROTECTION DEVICES EMERGENCY STOP switch All machines for EU member states with CE marking according to EC Machinery Directive 2006/42/EC Technical documentation stored on PC The measuring table must be completely separated by a protective fence. This and other protective devices are not included in the scope of supply.

Condition: used, functionality: not functional, Optical wave measuring device for measuring rotationally symmetrical workpieces Codpfx Agoz Atggsrehd (without power supply)

Condition: good (used), Year of construction: 2015, machine/vehicle number: FS0B000351, type of input current: AC, measuring range Z-axis: 3,000 mm, total width: 260 mm, total length: 310 mm, total height: 100 mm, overall weight: 5 kg, ambient temperature (max.): 40 °C, Equipment: documentation/manual, Technical Specifications: 3D Point Accuracy: ≤ 1.0mm Indoor Scanning Volume: Up to 8m³ Csdjqxa Nispfx Agrshd IP Rating: IP52 Operating Temperature Range: 0 – 40°C Condition Details: Main Scanner and Laser: Impeccable condition Tablet, Calibration Board, and Accessories: Good condition with minor scratches Carrying Box: Displays wear but effectively protects the scanner Included in the Kit: Faro Freestyle-3D X Scanner Tablet Surface Pro 3 (Microsoft) Calibration certificate MicroSD Card and USB stick Calibration Plate Cleaning Kit Rugged Transport Case Company used scanner. Always kept in box after use.

Condition: used, functionality: fully functional, Geosig Accelerometer with recorder GeoSIG GMS plus Recorder Cjdpeq S Uz Ujfx Agrohd model no GMSplus-IP67 Geosig Accelerometer/sensor Model AC73 Type HHV Vibration sensor and Recorder including accessories as shown in the photos. This Vibration sensor and Recorder is used. We have a stock of approximately 100 used sensors and 100 used recorders available.