Condition: good (used), Year of construction: 2004, OKUMA Euro Center V50, year of construction 2004 Djbu Rbouh Skajgnocg Control unit: OSP-10M Travels: X-1020 Y-510 Z-525 Table load 680kg Clamping surface 1200x510 Tool changer 20 times

Condition: good (used), Year of construction: 2005, Functionality: fully functional, machine/vehicle number: 175956, Mazatrol FUSION Nexus 640M steering unit Djbu Rbeva Dlfjgnscg Tool magazine 30 places Through-spindle coolant Table 4th axis Tool length presetting CNC Options Package "Performance"

Condition: refurbished (used), Year of construction: 2000, Functionality: fully functional, machine/vehicle number: 163123, travel distance X-axis: 3,300 mm, travel distance Y-axis: 620 mm, travel distance Z-axis: 800 mm, spindle speed (max.): 10,000 rpm, number of slots in tool magazine: 60, TECHNICAL DETAILS CNC control: Siemens 840D retrofit in 2014 X-axis travel: 3,300 mm Y-axis travel: 620 mm Dobu Rbjvprr Ssgnjcg Z-axis travel: 800 mm (only with swivel bridge removed) Table Clamping surface: 3,500 mm x 650 mm Clamping surface with swivel bridge removed: 1,600 mm x 650 mm Spindle Speed range up to: 10,000 /min Tool holder: ISO SK 40 Axis drives Rapid traverse: 25,000 mm/min Tool magazine Magazine type: chain magazine Number of tool positions: 60 MACHINE DETAILS Connection voltage: 400 V Mains frequency: 50 Hz Length x width x height: 7,700 mm x 3,677 mm x 3,532 mm Machine weight: approx. 17,500 kg EQUIPMENT - Chip conveyor - IKZ 40 bar - Control cabinet air conditioning - Control system retrofit in 2014 - Linear guides X-axis and Y-axis including roller guide carriage replaced in 2015 - Linear guides Z-axis including roller guide carriage replaced in 2017 - Main spindle re-bearing including all Heidenhain encoders and overhaul of the hydraulic tool clamp in 2015 - KGT X-axis in 2021 - KGT Y-axis in 2016 - KGT Z-axis in 2018 - Worm gear Fibro Plan in 2014 - A complete zero-point clamping system is also included with the machine.

Condition: excellent (used), Working travels 620 x 470 x 400 mm Table size 700 x 450 mm Spindle taper SK40 Spindle speeds -10000 rpm Tool changer 20 Pos. Control FANUC 0iM Coolant through spindle With palett changer Dcsbu Rbgjvha Ifjneg MARCELS MASCHINEN CH

Condition: like new (used), total height: 2,750 mm, total width: 2,170 mm, table length: 2,200 mm, overall weight: 4,000 kg, Table working area: 410x900mm Table loading capacity: 300kg X-axis travel: 560mm Y-axis travel: 410mm Z-axis travel: 460mm Speed max. 8000 rpm Dcsbsuh D Epou Rbgnjg Number of tools installed: 18 Capacity: 16 kVA Voltage:

Condition: repair required (used), Year of construction: 2005, operating hours: 44,050 h, Functionality: not functional, machine/vehicle number: 2731660/C 0000, travel distance X-axis: 600 mm, travel distance Y-axis: 400 mm, travel distance Z-axis: 425 mm, Machining center with chip conveyor and belt filter system. Travel X/Y/Z 600/400/425mm Speed range 20 to 18,000 1/min AC main drive 35/25 kW (40/100% ED) Dcjbu Rbgsrl Rwxoneg 3D path control SINUMERIK 840D powerline Tool change/ 25 magazine positions HSK-A 63 tool holder Shuttle table Clamping surface 2x660x400 mm Infrared measuring probe Heidenhain TS 641 Internal cooling lubricant supply (IKZ) 40bar / 23l/min / 600L container Scraper belt conveyor discharge height 1000mm incl. coolant tank 200L Gravity paper belt filter Rotating viewing window Oil and emulsion mist separator with mechanical filter Work area flushing - chip flushing Flow rate: 100l/min Pressure: 1bar Electronic handwheel SIEMENS SINDIC data transmission between network and SINUMERIK 840D Machine is sold as in need of repair. There is a defect in the sensor for the tool changer (position detection). Please send technical questions in writing. >>> Commercial sale

Condition: excellent (used), Year of construction: 2017, ROMI CNC Vertical Machining Centre Type:D800 Dcobu Rbovpgd Nognog Year:2017 Control: SIEMENS SINUMERIK 828D XYZ travel:800x530x580mm Distance from table top to spindle nose:110-750mm Table size:910x500mm Max. table load:900kg Spindle taper:ISO40 Toolchanger:30atc Max. spindle speed:8000rpm Machine weight:5800kg Please Note: The above information has been obtained to the best of our ability and belief, and from the manufacturers where possible. It is given in good faith, but its accuracy can not be guaranteed. Accordingly, it will not form a representation or constitute contractual terms. Specific tooling must be requested before purchasing, since machines are in production at time of photos and availability can not be guaranteed. We advise you to check any vital details!

Condition: excellent (used), Year of construction: 2015, operating hours: 7,500 h, Functionality: fully functional, travel distance X-axis: 1,050 mm, travel distance Y-axis: 560 mm, travel distance Z-axis: 450 mm, number of spindles: 1, number of slots in tool magazine: 32, Equipment: chip conveyor, OKUMA Genos M560RV CE 2015 3 axis Spindle hours -7500 rpm Renishaw Travel distance X-axis: 1,050 mm Travel distance Y-axis: 560 mm Travel distance Z-axis: 460 mm Spindle speed (max.): 15,000 rpm Dsbu Rou Slbiebgnjcg Table width: 560 mm Table length: 1,300 mm ATC - 32 tools Control OSP P300 In excellent condition . Location in Israel. Seller information : TAD USED CNC. Tad .st Mizpe Naftali 30/2 Metula 1029200 .Israel

Condition: new, Designed to overcome the common limits of this product category: reduced robustness and poor repeatability over time. Dobjiu U S Eou Rbgnocg Thanks to its optimised design, Breton Hawx is not only more rigid and stable but also guarantees an excellent size-towork area ratio. It is easily integrated into all production environments, it’s delivered already assembled and tested; it does not require special foundations and has minimal commissioning times. The Hawx E1 is built using a selfsupporting monolithic structure, which is one of the main characteristics of the machine, making it robust and enabling easy handling for delivery and installation. The HAWX E2 foresees a pre-assebled starting module made from a U-shape monoblock structure which is expandable longitudinally using one or more pre arranged and calibrated extra U-shape supporting frames. Both versions of the machine are built with a box-in-box architecture that guarantees a significant increase in rigidity of the bridge-ram assembly. The high strength, characteristic also of the new Hornet head, enables a remarkable increase in material removal performance and accuracy, all with the greatest dynamics.

Condition: excellent (used), Working travels 600 x 560 x 510 mm Dcebu Rbjvhahrognsg Table size 900 x 560 mm Spindle taper SK40 Spindle speeds 20 -12'000 rpm Tool changer 30 Pos. Control SIEMENS 840D Coolant through spindle Misc. accessories MARCELS MASCHINEN CH

Condition: ready for operation (used), Year of construction: 2000, CNC Control: FANUC 18-M X mm: 560 Y mm: 400 Z mm: 570 B mm: - Table dimension mm: 2 x (650 x 450) Table load capacity kg::: 300 Cutting feed rate mm / min X,Y,Z: - Max. rapid traverse m / min X, Y, Z: 30,30,24 Spindle speed rpm: 8.000 Spindle power kW: 11 Spindle type: ISO-40 Torque Nm: - Type of loader: RANDOM Magazine positions: 30 Max. tool diameter mm: Max. tool dia. Tool dia. with empty adjacent positions: - Max. tool length mm: - Max. tool length mm: - Max. tool dia. Max. tool length mm: - Max. tool weight kg: - Dcebu Rbou Ibq Esgnjg Coolant reservoir capacity l.: - Cooling through the spindle bar: - - Max. tool length mm: - Max. tool weight kg: - Coolant tank capacity l: - Max. coolant tank capacity l Equipment: Chip extractor Working light Double Pallet

Condition: ready for operation (used), Year of construction: 1998, Vertical machining center Hedelius BC 60 with attached C-axis year 1998 travel x/y/z : 2500/630/750mm Heidenhain TNC 426 -- all further information can be found in the pictures The machine has only machined aluminum so far! The original operating instructions are available The screen is a front-mounted flat screen, the original is no longer present Accessories: none The machine is fully functional. Only known defect: Slight inaccuracy on the angle adjustment of the C-axis. The tolerance is approx. +/- 1'. If there are tighter tolerances for the planned production, then the clamping device should be overhauled. The machine can be inspected under power. ___ Our general terms and conditions apply, and the seller is not liable for typing or data transmission errors. The appearance of the items on offer corresponds to their age and the pictures shown. Dcebu Rjt D Rcnsbgnsg The technology and wear of the items on offer are in keeping with their age. Used machines are sold exclusively to traders and without warranty.

Condition: excellent (used), Year of construction: 2020, KITAMURA CNC Vertical Machining Centre Type:MYCENTER 3XD Year:2020 Control:ARUMATIK-Mi Control XYZ travel:760x510x510mm Table size:860x500mm Max. table load:800kg Djbu Rbgevpf Slsnecg Table top to spindle nose:100-610mm Max. spindle speed:12000rpm Spindle taper:BT40 Toolchanger:24atc Machine size:2451x2243mm Please Note: The above information has been obtained to the best of our ability and belief, and from the manufacturers where possible. It is given in good faith, but its accuracy can not be guaranteed. Accordingly, it will not form a representation or constitute contractual terms. Specific tooling must be requested before purchasing, since machines are in production at time of photos and availability can not be guaranteed. We advise you to check any vital details!

Condition: excellent (used), Functionality: fully functional, travel distance X-axis: 633 mm, travel distance Y-axis: 560 mm, travel distance Z-axis: 560 mm, rapid traverse X-axis: 30 m/min, rapid traverse Y-axis: 30 m/min, rapid traverse Z-axis: 30 m/min, controller manufacturer: Heidenhain, controller model: ITNC530, rotational speed (min.): 18,000 rpm, Equipment: chip conveyor, documentation/manual, Cover Maho DMU 60 MonoBLOCK -Control: Heidenhain ITNC 530 -Travel X-, Y-, Z-axis: 633/560/560mm -feed speed 0.01-30000 mm/min -rapid traverse 30 m/min -Spindle speed: 20-18000 1/min -Tool holder: SK40 DIN 69871 -Tool magazine with 24 places -Machine weight approx. 9000 kg -Chip conveyor -Rinsing gun -Coolant blow air changeover (M25) -Heidenhain TS 649 touch probe -Manual control unit -BLUM laser -bed flushing The machine was checked and measured. A geometry report was created. The geometry is within the tolerance for new machines. Djbu Rbsuii Hnjgnocg Very good condition. An inspection / test, on site under power, is of course possible. We are happy to offer transportation, installation and commissioning on site. Everything from a single source: We at Baumgärtner CNC GmbH & Co. KG are a company that specializes in: -service -maintenance -overhaul -automation of DMG machines and other well-known manufacturers. We accompany you! From the purchase of the machine, to transportation and installation, to commissioning and subsequent maintenance or repair work, you can count on us.

Condition: new, Breton Eagle is the vertical gantry 5 axis, milling centre for machining complex 3D shapes in lightweight alloy, resin, or composite materials Dcsbuetpcuce Rbgnjg

Condition: new, Year of construction: 2025, CNC centers have been designed based on proven components that guarantee reliability for a long time of use. The massive machine body ensures efficient and precise machining. Hermetic chamber ensures safety and cleanliness at the workplace. The table with a hardened surface can accept workpieces without loading the mechanical elements of the structure. Each machine in this series is equipped with an efficient cooling system to ensure optimal cutting conditions. Description Linear guides Top quality guides for all axes Massive machine body Debu Rbeiztcpsgnocg Good accessibility of the work table Hermetic working chamber ensuring work safety CNC control (SIEMENS SINUMERIK 808D) Technical parameters Spindle taper BT40 Table dimensions 1000 x 500 mm The distance between the spindle and the table surface 620 mm The distance between the spindle and the column 530 mm Table travel 800 x 500 mm Z axis movement range 500 mm Spindle speed range up to 10 000 rpm Number / width / spacing of T-slots 4 / 18 mm / 120 mm Working feed 2000 mm/min Rapid feed X,Y,Z 15 m/min Number of tools in the magazine 24 Power (torque) of feed drives 1,75 / 1,75 / 3,5 kW Spindle motor power 5,5 kW Power supply, total power 400V / 18 kW Max. table load 500 kg Weight 5000 kg Dimensions (L x W x H) 2800 x 2300 x 2700 mm Optinally: 4-th axis The price is a net price. Price does not include shipping costs. For more information, please contact us by phone or e-mail. We invite you to familiarize yourself with the offer on our website.

Condition: excellent (used), Year of construction: 2000, DESCRIPTION Debu Rbgsiva Dkjnscg Hermle C 800 V CNC vertical machining center was built in 08.2000 in Germany. The milling center operates in three axes and the maximum X / Y / Z travels are 800, 600 and 500 mm. The machine is equipped with a Sinumerik 840D numerical control with a LAN cable to an external computer. In addition, the lathe is equipped with, among others: Chip conveyor, Hydraulic clamping, Magazine for 87 tools, Turning finder and Control cabinet air conditioning. The spindle rotates at a maximum speed of 15,000 rpm. Spindle hours approx. 4500 h. The total weight of the milling center is approx. 7 tons. Technical data of the Hermle C 800 V CNC milling center - Travel X / Y / Z axis: 800/600/500 mm - rapid traverse: 35 m/min - maximum spindle speed: 15.000 rpm oil mist extraction - spindle power: 19 kW - operating voltage: 400V; 3PH; 50Hz - control voltage: 220V AC; 24V DC - machine dimensions (L x W x H): 2,3 x 3 x 2,65 m - Total weight: 7000 kg Equipment of the Hermle C800V CNC milling center - CNC control: Sinumerik 840D - Tool magazine capacity: 87 pieces - Lamp sockets: SK40 - cooling pump through the tool: 40 bar - control cabinet air conditioner - rotating viewfinder - chip conveyor Separately additionally available with to see on the photos! tool presetter Various SK40 holders Touch probe Heidenhain TS32 Neuwetig

Condition: used, Year of construction: 1995, Fanuc ROBODRILL ALFA T10 B, year of construction 1995 Dsbuovfpqwo Rbgnscg Revolutions 8000 rpm Pick-up Sk 30 Fanuc 16 M control Tool changer 10-fold

Condition: good (used), Year of construction: 1996, Travel X/Y/Z 600/500/450 mm, Control HEIDENHAIN TNC 410 PA, spindle power 9,0 KW, spindle speed 5-6300 rpm, ISO40, table size 530x900 mm, max. table load 400 kg, tool changer 22 places, dimension 2200x2700x2050 mm, ca. 3550 kgs, accessoires Renishaw tool prove, 4th axis TRIAG with clampings, Software updated, flat screen, radio data transfer installed, tool holders, manuals Dcjbu Rbgjqagugjnjg

Condition: good (used), Year of construction: 1999, Vertical machining center in good condition Can be viewed under powe rupon appointment Available for immediate purchase Including: Helical chip removal Fast tool changer Cooling through the spindle High pressure pump 15 bar + fine filtering 125 micron connection for measuring probe (probe not included) Full technical specifications in the attached pictures. Dobu Rovm Utasbgnjcg

Condition: excellent (used), Year of construction: 2008, Table 1,200 x 600mm, X 1.050mm, Y 610mm, Z 610mm. BT 40 60-10.000Rpm, Hi/Lo Gear, Cooling trough spindle. ATC 32 Pos, 2,350 Spindle Hours. Heidenhain TNC 530 Dobu Rbsu A Ui Degnocg

Condition: excellent (used), Hardinge Bridgeport XV 710 Vertical Machining Centre(2008) Debujvmf N Ee Rbgnocg Siemens 810d Control Table size: 760mm x 420mm X-Axis = 711mm, Y-Axis = 457mm, Z-Axis = 457mm Rapids: 30 M/Min Spindle: 8,000 RPM BT40 7.5 KW ATC: 20 Position 7 Seconds Tool to Tool Floor Space Required: 2180mm x 2050mm Weight: 4100Kgs

Condition: used, Mazak FJV-20, 119928 Year 11-95 XYZ: 560x410x410 Table: 800x640 Max workpiece: 980x660x500, 350kg Dcjbu Rbgevmfmqsnjg Engine: 22kW Spindle: 12000RPM Taper: SK40 Mazatrol M-plus

Year of construction: 2003, Condition: excellent (used), control: Ultimax tool taper: SK40 table size: 1270 x 610 mm travel: x-1060; y-610; z-610 mm spindle speed: 10000 rpm 40 fold tool changer Debu Rbeitk I Uognjcg internal cooling chip conveyor accessories: 2 hydrl. vices, div. tool holder

Year of construction: 2003, Condition: excellent (used), control: Ultimax tool taper: SK40 table size: 1020 x 510 mm travel: x-760, y-510, z-610 mm Dcjbsitk Ncou Rbgnjg spindle speed: 10000 rpm 24 fold tool changer internal cooling accessories: 2 hydrl. vices, div. tool holder