Year of construction: 2006, Condition: ready for operation (used), Travel X/Y/Z: 1050mm/800mm/560mm, C-axis: 360°, spindle head swivel range: -10°/110°, speed: 18000rpm, spindle power: 25kW/35kW, table diameter: 950mm, table load capacity: 800kg, max. workpiece height: 500mm. Tool positions: 30, tool holder: HSK A 63, max. tool diameter: 80mm/130mm, max. tool length: 250mm, rapid traverse: 90m/min, feed: 20m/min. Control: Heidenhain iTNC 530, operating hours: 113894h, spindle hours: 13349h. Including chip conveyor, IKZ, distance measuring system, Blum laser and measuring probe. Documentation available. On-site inspection is possible. Fslqsv H Dgcoz A Tdogb

Condition: good (used), Year of construction: 2001, travel distance X-axis: 1,200 mm, travel distance Y-axis: 800 mm, travel distance Z-axis: 500 mm, workpiece weight (max.): 1,000 kg, Equipment: chip conveyor, TECHNICAL MACHINE BENEFITS: - RAPID TRAVERSE IN ALL AXES 30 M/MIN - CHIP-TO-CHIP TIME 6.5 S - NC SWIVEL ROTARY TABLE - CLAMPING SURFACE: Ø 800 MM - SWIVEL RANGE: +15°/-97° - SPEED DRIVE POWER/TORQUE/TOOL CONSUMPTION - 10000 1/MIN 25 KW/159 NM (40% ED) / SK 40/HSK A 63 - 16000* 1/MIN 15 KW/130 NM (40% ED) / SK 40/HSK A 63 - 24000* 1/MIN 23 KW/79 NM (40% ED) / HSK A 63 - 30 SEATS QUALITATIVE MACHINE BENEFITS: - INTERNAL COOLANT SUPPLY 40 BAR - HEIDENHAIN MEASURING PROBE WITH RADIO Fgjlqov Hxifez A Tdjb - ELECTRIC HEAT COMPENSATION - ELECTRONIC MANUAL CONTROL MODULE - OIL MIST EXTRACTION - CHIP CLEANING GUN - BLOW-OFF DEVICE - SEALING AIR FOR STANDARDS - A AXIS +15º / -97º C AXIS 360º - C AXIS 360º

Condition: good (used), Year of construction: 2008, operating hours: 23,532 h, Functionality: fully functional, machine/vehicle number: 11760001053, travel distance X-axis: 450 mm, travel distance Y-axis: 400 mm, travel distance Z-axis: 480 mm, controller manufacturer: Heidenhain, controller model: iTNC 530, rotational speed (max.): 18,000 rpm, No minimum price - guaranteed sale at the highest bid! TECHNICAL DETAILS Working area Travel: 450 mm x 400 mm x 480 mm Main drive Motor spindle: 18,000 1/min incl. active cooling Power: 15 kW (40 % ED); 10 kW (100 % ED) 3D control: Heidenhain iTNC 530 Tool holder Type: SK 40 according to DIN 69871 Tool clamping: according to DIN 69872 Equipment Swivel head: controlled NC swivel milling head (B-axis) Tool changer: Pick-up system, 16 magazine positions SK 40 Rotary table: NC rotary table diameter 450 mm Chip conveyor: available Control: 3D path control Switch-on time: 55,916 h Spindle time: 23,532 h See attached technical drawings (linked below). EQUIPMENT Tool changing device Chip conveyor 3D path control Fslsu Ra I Ieqz A Tdjgb

Condition: ready for operation (used), Year of construction: 2000, operating hours: 14,430 h, Functionality: fully functional, machine/vehicle number: 13479, travel distance X-axis: 875 mm, travel distance Y-axis: 500 mm, travel distance Z-axis: 500 mm, workpiece weight (max.): 300 kg, rotary table diameter: 500 mm, spindle speed (max.): 7,000 rpm, Machine can be shipped free of charge for €1,850 net! TECHNICAL DETAILS Control: Heidenhain TNC 410 Travel X / Y / Z: 875 / 500 / 500 mm Quill stroke: 75 mm Table NC rotary table: 500 mm C-axis: 360° B-axis: ± 30° Speed: 11 rpm Resolution: 0.001° Part accuracy: ±15'' Table load: 300 kg Drive Drive power (100% / 40% duty cycle): 7.5 / 11 kW Felqjvn Si Iez A Tdsgb Torque (100% / 40% duty cycle): 266 / 390 Nm Speed: 20 - 7,000 rpm Vertical milling head Quill stroke (vertical and transverse): 75 mm Swivel range: 0 - 90° Feed drives Feed forces X, Y and Z: 8,000 N Rapid traverse: 15 m/min Diameter and pitch of the feed spindles: 32 / 10 mm Measuring system Direct position measuring system, resolution: 0.0001 mm Position tolerance Tp in X-Y-Z axis according to VDI/DGQ 3441: 0.010 mm Tool system Spindle cone: SK 40 (similar to DIN 2079, for tool holders according to DIN 69871 A) Number of tool positions: 16 pieces Tool diameter: 80 mm Tool diameter with free adjacent positions: 100 mm Tool length: 250 mm Tool weight: 6 kg MACHINE DETAILS Operating voltage: 400 V / 50 Hz Total power: 14 kVA Weight: 4,800 kg Dimensions: 3.0 x 2.3 x 2.2 m Control switch-on time: 50,052 h Program run: 15,142 h Spindle switch-on time: 14,430 h Coolant system Tank capacity: 120 l Flow rate at a flow pressure of 3 bar: 24 l/min

Condition: ready for operation (used), Year of construction: 2011, operating hours: 14,500 h, Functionality: fully functional, travel distance X-axis: 850 mm, travel distance Y-axis: 500 mm, travel distance Z-axis: 610 mm, spindle speed (max.): 12,000 rpm, number of slots in tool magazine: 40, 5-axis simultaneous universal machining center TECHNICAL DETAILS Felqsv Hpt Ioz A Tdogb Control: HEIDENHAIN iTNC 530 x-path: 850 mm y-path: 500 mm z-path: 610 mm Rotary table: 400 mm Spindle speed: 12,000 rpm Drive power - spindle motor: 17/10 kW Tool changer: 40-fold Spindle holder: SK 40 MACHINE DETAILS Machine weight: 7.7 t Total power requirement: 28.5 kW Space requirement: 3 x 2.70 x 3.2 m Switch-on hours: 38,000 Spindle hours: 14,500 EQUIPMENT NC rotary swivel table Ø 400 mm 3D infrared measuring probe electric handwheel chip conveyor blast air through spindle IKZ 40bar rinsing gun direct measuring system

Year of construction: 2024, Condition: new, NEW AUTOMATIC DOSER For collecting screws and bolts after stamping and threading Machine acc. to standard MACHINERY DIRECTIVE 89/392/EEC TECHNICAL FEATURES: Fgolqzetvpkmj A Tdsb MODEL SLP-1000 EXTERN DIAMETER 1.000 mm MIN. HEIGHT WITH STAND 750 mm MIN. HEIGHT WITH STAND AND WHEELS 900 mm MIN. UNLOADING HEIGHT 550 mm NUMBER OF CONTAINERS 10 Pcs. UNIT CAPACITY CONTAINERS 12 dmᵃ MACHINE WEIGHT 370 Kg. ENGINE: DRIVING FORCE VOLTAGE 380 V. TOUCH VOLTAGE 24 V. FREQUENCY 50 Hz. ENERGY CONSUMPTION 0,37 KW Available from H.B.R. srl - Calolziocorte (LC) - Agent for Europe

Year of construction: 2006, Condition: ready for operation (used), Travel X/Y/Z: 835mm/510mm/510mm, speed: 12000rpm, spindle power: 14kW, table dimensions X/Y: 1000mm/560mm, table load capacity: 800kg, max. workpiece height: 720mm. Tool positions: 20, tool holder: SK40, max. tool diameter: 80mm/130mm, max. tool length: 250mm, rapid traverse: 30m/min, feed: 20m/min. Machine dimensions X/Y/Z: approx. 3500mm/3500mm/2700mm, weight: approx. 4500kg, control: Heidenhain iTNC 530, operating hours: 112962h, spindle hours: 30702h. Including chip conveyor, IKZ, distance measuring system. Documentation available. On-site inspection is possible. Felqz A Tov H Dgpjdegb

Condition: good (used), Year of construction: 1997, Equipment: documentation/manual, Deckel DMU 80T Mill Plus Fgolju Hy E Seqz A Tdjb

Condition: excellent (used), Year of construction: 2019, operating hours: 10,000 h, Functionality: fully functional, machine/vehicle number: G552-2158 U21156, travel distance X-axis: 800 mm, travel distance Y-axis: 1,020 mm, travel distance Z-axis: 970 mm, rapid traverse X-axis: 65 m/min, rapid traverse Y-axis: 50 m/min, rapid traverse Z-axis: 80 m/min, torque: 206 Nm, controller manufacturer: HEIDENHAIN, controller model: TNC 640, workpiece diameter (max.): 900 mm, workpiece weight (max.): 700 kg, table load: 800 kg, rotary table diameter: 770 mm, overall weight: 25,700 kg, spindle speed (max.): 16,000 rpm, operating hours of spindle: 5,200 h, coolant supply: 40 bar, number of spindles: 1, number of slots in tool magazine: 126, tool length: 750 mm, Equipment: chip conveyor, Machine Specifications: Model: GROB G550 AB Generation 2 Power Supply: 400V, 50Hz, TN-S Compressed-Air System: Working pressure 5 bar, minimum input pressure 5 bar Automatic Work Area Door for manual and automated loading/unloading Work Area Exhaust System: Decentralized, 800 m³, Filter Grade F9 Machine Protection for Water-Based Cutting Fluids Work Area Lighting Cooling System: Air-cooled chiller unit (11 kW) Control System: Heidenhain TNC 640 with English HMI Swivel Axis Calibration (GSC) Collision Monitoring (DCM) Kinematic Measurement Inspection Equipment Pallet Storage System Interface (Software & Hardware v1.7) Key Features: Tilting Table Unit (A-Axis) & Rotary Table with T-Slots (B-Axis) Motorized Spindle: HSK-A 63, 16,000 RPM, 159/206 Nm, 25/32 kW, Oil-Air Lubrication Double Disk-Type Tool Magazine: HSK-A 63, 126 pockets, supports extra-long tools Laser Measurement System Tool Lift & Tool Cleaning Device Chip Management: Scraper-Type Chip Conveyor, Cutting Fluid Filter System KF220, Cutting Fluid Tank High-Pressure Cutting Fluid Unit (5-40 bar, ICS), Circulating Chiller (13 kW), Air Gun & Flush Gun in Work Area, Compressed Air Feed Through Spindle Center Touch Probe: Renishaw OMP60 Remote Machine Diagnostics with Access Control Switch CE Labeling, Slovenian Documentation & Tags Easy Robot 250 Automation System: Base Unit: ERE Robot Easy MTS 2.0 400, 6-position 250kg Accessories: EWIS Rapid Scan, Comserver Kit Internal Erowa Manual Control Options: Magazine modification, Robodoor & Safety Fences Interfaces: Plug Kit Harting Modular Connector Installation & Training Included Tooling for Automation: MTS Base Plate 410x410x250 P/A Universal (6x) MTS Pallets, Seals, and Chucking Spigot Set Fgelqz A Tev Hdmpedsb MTS Gripperlink Rapid & EWIS Rapid Chip with Chip Holder This GROB G550 is an advanced, fully-equipped machining center ready for high-precision and high-efficiency operations. The Easy Robot 250 system enhances automation capabilities, making it an ideal solution for modern manufacturing environments.

Condition: good (used), Year of construction: 2004, Functionality: fully functional, travel distance X-axis: 600 mm, travel distance Y-axis: 700 mm, travel distance Z-axis: 600 mm, controller model: Siemens 840D Powerline, spindle speed (max.): 18,000 rpm, TECHNICAL DETAILS X-axis: 600 mm Y-axis: 700 mm Z-axis: 600 mm C-axis swivel angle: 360° Control type: Siemens 840D Powerline Spindle system Spindle speed: 18,000 rpm Tool holder: HSK-A 63 (according to DIN 69893) Tool changer & magazine Tool changing device: Horizontal Magazine type: Chain magazine Capacity: 120 tool positions NC rotary table & pallets Pallet carrier: Integrated Number of pallets: 3 x (530 mm x 500 mm) Cooling system & measuring technology Coolant tank: 500 L IKZ: Form AD Fslqov E Hz Hsz A Tdsgb Measuring probe: Heidenhain TS 641 (infrared) Tool measurement: Blum Laser (tool length & diameter measurement horizontal/vertical) MACHINE DETAILS Machine dimensions (LxWxH): 4,500 x 2,300 x 2,790 mm Total weight of the machine: 8.2 t Transport dimensions: 2.9 x 2.6 x 2.3 m Transport weight: 6.5 t Tool magazine: 1,300 kg (240 x 190 x 220 cm) Chip conveyor: 540 kg (440 x 60 x 170 cm) Cooling lubricant system: 950 kg (220 x 140 x 220 cm) EQUIPMENT - B-axis available - Automatic swivel milling head - Rotating pallet changer - 3D path control - Hydraulic connection for clamping hydraulics on the pallet (pipe screw connection 2 x G1/4") - Pallet and program management ("LPC") for Siemens 840 CPL - Software adaptation for pressure level control (40-240 bar in the work area, max. 150 bar at the setup station) - E-Plan & documentation in German

Condition: good (used), Year of construction: 2013, 5-axis machining center - gantry milling machine Manufacturer: PARPAS Machine model: Diamond Linear Control: Heidenhain iTNC 530 Year of manufacture: 2013 Fjlsvytd Roqz A Tdegb Number of controlled axes: 5 TECHNICAL DATA Travel paths - X-axis: (mm) 2,200 - Y-axis: (mm) 1,500 - Z-axis: (mm) 1,000 - C-axis (milling head): (degrees) +/- 370 - A-axis (milling head): (degrees) +/- 105 Distance between the columns: (mm) 2,700 Distance between table surface and spindle tip with milling head mounted max.: (mm) 1,220 - X and Y axis: (m/min) 60 - Z axis: (m/min 40 Spindle 5-axis orthogonal milling head - Internal coolant supply (IKZ): (bar) 20 - Spindle speed max.: (rpm) 20,000 - Drive power S1 / S6: (kW) 29 / 37 - Torque S1 / S6: (Nm) 92 / 115 Tool magazine - Tool holder: HSK 63 A - Tool positions: 42 - Tool diameter: (mm) 80 - Tool length: (mm) 350 - Tool weight: (kg) 6 Machine table - Table size L x W: (mm) 2,300 x 1,600 - Distance between T-slots: (mm) 200 - T-slot dimensions: (mm) 22 - Max. workpiece weight: (kg/m²) 6,000 EQUIPMENT FEATURES + Heidenhain iTNC control 530 + Portal (gantry) design: U-shaped "monoblock" construction with a traverse and stationary workpiece + Milling head (A and C axis), A axis with torque motor and hydraulic clamping, A axis arranged at right angles to the C axis + Machine does not require a foundation + Glass scales in linear axes X, Y and Z. + C axis with Heidenhain angle measuring system, resolution 0.001 degrees + Electronic handwheel Heidenhain HR 520 + Chip conveyor 2 pieces (one each on the front and back of the table) + Chip flushing gun + Internal cooling (IKZ) 20 bar + Paper filter device + Sliding roof with opening for loading and unloading + Supply of blown air and water through the spindle Weight: approx. 30,000 kg Subject to changes and errors in the technical data and information.

Condition: excellent (used), Year of construction: 2006, Functionality: fully functional, Equipment: chip conveyor, documentation/manual, Deckel Maho DMU 50 evo Linear with TNC 530 control from Heidenhain, TOP condition Technical data: Fgjlovyr Tdjqz A Tdsb >> Year of manufacture 2006 >> Manufacturer Heidenhain, type iTNC 530 >> Travel paths X500/Y450/Z400 >> C-axis 360 degrees >> B-axis 0 degrees to 161.955 degrees >> Tool holder HSK A63 >> Max. spindle speed up to 18000 rpm >> Feed continuously programmable up to X, Y, Z 20000 mm/min C-B axis continuously programmable up to rapid traverse speed >> Rapid traverse Y- Z axis 50 m/min X-axis 80 m/min (linear drive) B-axis 40 rpm C-axis 50 rpm >> Tool magazine: Double gripper 60 magazine spaces >> Table clamping area Ø 500 x 380 mm T-slot spacing 63/14H7 >> Table load 200 KG >> Dimensions and weight: approx. Machine without control and attachments Depth 3.0 meters Width 2.4 meters Height 2.6 meters Weight approx. 7000 kg >> Operating voltage 400 V >> electr. Handwheel Heidenhain HR 410 >> Power connection 17 KVA >> Chip conveyor >> Active spindle cooling >> Mist extraction >> IKZ 40 bar >> Coolant lubricant cleaning system (fleece filter system) >> Spray gun >> Visiport >> Sealing air on the measuring system >> Preparation for robot loading >> 3D probe Heidenhain TS640 >> 3D Quick Set >> Kinematics >> Blum laser for tool measurement and breakage control Cpvnunmsoi >> Complete documentation Dn2F2R The following work was carried out: >> Generally overhauled main work spindle >> Complete maintenance: All cooling hoses and pneumatic hoses replaced, new filters, fluids and belts replaced. Scrapers, etc. Complete cleaning. >> Geometrically measured (acceptance protocol) About the machine: A Deckel Maho DMU 50 evo Linear machining center with a TNC 530 3D path control from Heidenhain is offered. The machine is in very good condition. The main spindle on the DMU was overhauled (replacement spindle), completely serviced and an acceptance protocol was created. Take advantage of the opportunity to view and try out the machine on site with power on.

Year of construction: 2010, Condition: ready for operation (used), Travel X/Y/Z: 2000mm/1700mm/800mm, speed: 20000rpm, spindle power: 43kW/64kW, table dimensions X/Y: 2200mm/1000mm, table load capacity: 4000kg, max. workpiece height: 800mm. Tool positions: 30, tool holder: HSK 63 A, max. tool diameter: 90mm, max. tool length: 300mm, rapid traverse: 40m/min, feed: 30m/min. Control: Heidenhain iTNC 530, operating hours: 112274h, total spindle hours: 40233h, current spindle hours: 9915h. Including chip conveyor, IKZ, Blum tool probe, Blum laser tool measurement, vibration control, spray gun, internal air cooling and oil mist extraction. The machine only runs on 3 axes. Documentation available. On-site inspection is possible. Fjlqjv H Dgvez A Tdegb

Condition: used, Year of construction: 2003, Functionality: unexamined, travel distance X-axis: 510 mm, travel distance Y-axis: 510 mm, travel distance Z-axis: 460 mm, controller model: Mazatrol 640M-5x, Equipment: chip conveyor, Control: Mazatrol 640M-5x Table: 400x400 mm Table load: 300 kg. Number of pallets: 2x X-axis travel: 510 mm Y-axis travel: 510 mm Z-axis travel 460 mm A-axis: 120/+30° C-axis: 360° Spindle taper: MAS BT 40 Spindle drive: 22/15 kW Number in magazine: 40 Fslqz Aevyrp So Tdegb We sell this machine at a special price called “as seen”. This means that we do not check the condition of the machine. According to our information, the door between the two pallets is missing. It is the buyer's responsibility to make or buy a new door for the work area. Due to the special price “as seen”, we only sell this machine to an EU country. We do not handle export issues. We recommend that you always inspect the machine to get a good overview of the machine.

Condition: excellent (used), Functionality: fully functional, Universal milling machine Deckel Maho DMU 50T with TNC 426 / 430 control from Heidenhain training machine few spindle hours Huznepo Technical data: >> Year of manufacture 1998 >> Heidenhain control TNC 426 / 430 >> Travel paths X500/Y400/Z400 >> C and B axis manual with digital display >> Work spindle: Max. torque 88 Nm Max. spindle speed 20 - 9,000 rpm Tool holder SK40 >> Feed X, Y, Z -10,000 mm/min Rapid traverse X, Y, Z 12 m/min >> Tool magazine: Number of tools 16 >> Table Ø700x500mm >> Swivel range +95° /-10° >> Dimensions and weight: Dimensions 2,200 x 4,000 x 2,450 mm Weight approx. 3,500 kg >> Coolant system >> Power connection 400V kVA 17 About the machine: Folqz Aevyr Rpj Tdogb Offered is a Deckel Maho DMU 50T universal milling machine with a Heidenhain TNC 426/430 control in very good condition. The table can be manually (digitally) adjusted using two additional axes B and C. The machine runs smoothly and precisely. The DMU 50T was used for training in a large company and has few spindle hours. Take the opportunity to view and try out the machine on site with power on.

Year of construction: 2008, Condition: ready for operation (used), Travel X/Y/Z: 1050mm/800mm/560mm, C-axis: 360°, spindle head swivel range: -10°/110°, speed: 18000rpm, spindle power: 25kW/35kW, table diameter: 950mm, table load capacity: 800kg, max. workpiece height: 500mm. Tool positions: 30, tool holder: HSK A 63, max. tool diameter: 80mm/130mm, max. tool length: 250mm, rapid traverse: 90m/min, feed: 20m/min. Control: Heidenhain iTNC 530, operating hours: 117490h, spindle hours: 18086h. Including chip conveyor, IKZ, distance measuring system, Blum laser and measuring probe. Documentation available. On-site inspection is possible. Fgoljv H Dgijqz A Tdsb

Condition: excellent (used), Functionality: fully functional, Equipment: chip conveyor, Universal milling machine Deckel Maho DMU 50T with TNC 426 / 430 control from Heidenhain with chip conveyor Technical data: >> Year of manufacture 2000 >> Heidenhain control TNC 426 / 430 >> Travel paths X500/Y400/Z400 >> C and B axis manual with digital display >> Work spindle: Max. torque 88 Nm Max. spindle speed 20 - 9,000 rpm Tool holder SK40 >> Feed X, Y, Z -10,000 mm/min Rapid traverse X, Y, Z 12 m/min >> Tool magazine: Number of tools 16 >> Table Ø700x500mm Felqz Aovyr N Ss Tdjgb >> Swivel range +95° /-10° >> Dimensions and weight: Dimensions 2,200 x 4,000 x 2,450 mm Weight approx. 3,500 kg >> Coolant system >> Power connection 400V kVA 17 About the machine: Offered is a Deckel Maho DMU 50T universal milling machine with a Heidenhain TNC 426/430 control in very good condition. The table can be manually (digitally) adjusted using two additional axes B and C. The machine runs smoothly and precisely. The DMU 50T has a chip conveyor. Take the opportunity to view and try out the machine on site with power on.

Condition: ready for operation (used), Travel X/Y/Z: 700mm/400mm/300mm, table dimensions X/Y: 650mm/400mm, max. table load: 350kg, spindle mount: BT30, speed: 12000rpm, power: 5.5kW, torque: 82.7Nm. Rapid traverse: 50m/min, feed: 50m/min, tool positions: 21, tool diameter: 75mm, tool length: 210mm, tool weight: 3kg. Machine dimensions X/Y/Z: approx. 2550mm/1450mm/2900mm, control: Fanuc 0iMF. Documentation available. On-site inspection is possible. Fgeljv H Dhgsqz A Tdsb

Year of construction: 2019, Condition: ready for operation (used), An Ingersoll CNC 5-axis machining center including automation is available. Travel X/Y/Z: 800mm/600mm/500mm, C-axis: 360°, B-axis swivel range: -60°/140°, speed: 36000rpm, main spindle power: 15kW. Table diameter: 600mm, max. table load: 2000kg, max. workpiece height: 400mm. Tool positions: 72, tool holder: HSK E50, max. tool diameter: 50mm/60mm, max. tool length: 260mm. Rapid traverse: 30m/min, feed rate: 15m/min, control: Heidenhain iTNC 640, operating hours: 48887h, spindle hours: 19040h. Including chip conveyor, cooling, automation Multichange light, distance measuring system, tool measurement Blum Laser, extraction system, extraction system for fine dust, measuring probe and table clamping system Erowa UPC. Documentation available. On-site inspection is possible. Fgjlqz A Tov H Dg Aedsb

Year of construction: 2018, Condition: ready for operation (used), Travel X/Y/Z: 460mm/510mm/560mm, table dimensions X/Y: 305mm/305mm, speed: 15000rpm, power: 22kW, tool positions: 50, tool diameter: 95mm, tool weight: 10kg, max. workpiece diameter: 500mm, max. workpiece height: 745mm. Rapid traverse: 60m/min, B-axis speed: 150rpm, positioning accuracy: +/-0.001mm, power consumption: 45kVA, control: Arumatik. Documentation available. On-site inspection is possible. Fjlqz Aev H Dg Ns Tdogb

Condition: ready for operation (used), Travel X/Y/Z: 500mm/350mm/300mm, table dimensions X/Y: 320mm/320mm, max. table load: 450kg, speed: 13000rpm, spindle power: 5.5kW, spindle mount: HSK40, tool positions: 24, max. tool diameter: 75mm, max. tool length: 200mm, max. tool weight: 3kg, rapid traverse: 60m/min. Machine dimensions X/Y/Z: approx. 4200mm/1250mm/2450mm, weight: 4400kg, control: Fanuc Series 21i-MB. Documentation available. On-site inspection is possible. Fslqz A Tev H Dhajdjgb

Year of construction: 2006, Condition: ready for operation (used), A Trumpf CNC laser machining center is available. Travel X/Y/Z: 1000mm/5000mm/400mm, laser type: HL383D, laser power: 300W, wavelength: 120µm, collimation: F150, optics: standard D100, operating hours: approx. 9000h, laser hours: 7500h. Including replacement cube D70, welding optics D70, new arc lamps and replacement filters. Documentation available. On-site inspection is possible. Fjlqz A Tsv Hrfaedogb

Year of construction: 2009, Condition: ready for operation (used), Verfahrweg X/Y/Z: 3200mm/1100mm/900mm, max. Werkstückgewicht: 5000kg, Tischdimensionen X/Y/Z: 3250mm/1220mm/1030mm. Spindelleistung: 45kW, Drehzahl: 6000U/min, Werkzeugaufnahme: SK50, Werkzeugdurchmesser: 125mm, Werkzeuglänge: 300mm, max. Werkzeuggewicht: 15kg, NC-Rundtischdimensionen X/Y: 800mm/800mm. Maschinendimensionen X/Y: ca. 7800mm/4700mm, Gewicht: ca. 25000kg, Steuerung: Siemens Sinumerik 810D Shopmill, Betriebsstunden: ca. 32000h, Spindelstunden: ca. 18000h. Inklusive Späneförderer und IKZ. Dokumentation vorhanden. Eine Besichtigung vor Ort ist möglich. Fgslqz Asv Hrg Ds Tdjb

Year of construction: 2008, Condition: ready for operation (used), A DMG CNC universal machining center is available. Travel X/Y/Z: 780mm/560mm/560mm, spindle speed: 12000/min, tool places: 60, tool holder: SK40, table: rotary table, milling head: swiveling, pallet capacity: 5, pallet dimensions X/Y: 630mm/500mm, control: Heidenhain MillPlus IT, operating hours: 42603h, spindle hours: 20137h. Including rotary pallet changer, BLUM laser, TS 641 3D measuring probe, chip conveyor, 40bar IKZ, 900l coolant tank and Rotoclear. Documentation available. On-site inspection is possible. Fgjlqz Aov Exrke Tdob

Year of construction: 2004, Condition: ready for operation (used), A DMG CNC universal machining center is available. Travel X/Y/Z: 780mm/560mm/560mm, spindle speed: 12000/min, tool places: 60, tool holder: SK40, table: rotary table, milling head: swiveling, pallet capacity: 5, pallet dimensions X/Y: 630mm/500mm, control: Heidenhain iTNC 530, operating hours: 62659h, spindle hours: 38299h. Including rotary pallet changer, BLUM laser, TS 641 3D measuring probe, chip conveyor, 40bar IKZ, 900l coolant tank and Rotoclear. Documentation available. On-site inspection is possible. Folqov Exrdoz A Tdogb