Used high-pressure cleaners for sale (120)

Condition: as good as new (ex-display), Hot water and steam high-pressure trailer, like new with 200 hours, complete with high- and low-pressure hoses, guns, lances, and nozzles. Kdodpfx Ahjyvv Rkjvoi

Condition: good (used), Falch T3H, 600 operating hours, new service, 300 bar hot water, very well maintained, 1996 Kedpewxm Ewefx Ahvjdi

Condition: new, operating pressure: 210 bar, high-pressure hose length: 20,000 mm, input voltage: 400 V, overall weight: 160 kg, warranty duration: 24 months, temperature: 155 °C, TECHNICAL DATA OF THE KARCHER HDS 10/21-4MXA WASHER: Model: HDS 10/21-4MXA Manufacturer: KARCHER Country of production: Germany Series: Professional Condition: NEW Thread type: KARCHER !EasyLock series Power supply (~/V/Hz): 3 / 400 / 50 Pumping capacity (l/h): 500 - 1000 Working pressure (bar/MPa): 30 - 210 Maximum pressure (bar/MPa): 230 Water heating range (°C): 80-155 Connection power (kW): 7.8 Power cable (m): 5 Weight (kg): 173 Dimensions (L x W x H) (mm): 1330 x 750 x 1210 EQUIPMENT OF THE KARCHER HDS 10/21-4 MXA WASHER: Pressure gun: Karcher Professional !EasyForce Advanced High-pressure hose: Karcher Professional - Longlife series 20M, DN8, 315BAR - !EasyLock Automatic high-pressure hose reel: Professional, originally integrated reel with a capacity of 20m - automatic winding. Spray lance: Karcher Professional 1050 mm !EasyLock Nozzle: Pressure nozzle POWER Karcher Professional !EasyLock Pressure regulator: Servopress KARCHER !EasyLock RELIABLE | DURABLE | ERGONOMIC In the offered HDS line, the main emphasis is placed on ergonomics and work comfort 4-pole, water-cooled engine Kdsdpfx Ahjv Tbbdsvji Two detergent tanks separated from each other ECO mode allows you to optimize fuel consumption (up to 20%) The set is equipped with an integrated, automatic pressure hose reel that significantly improves work comfort Additional handles allow you to transport the device with additional equipment. The brass pump head and automatic pressure reduction system extend the life of the device. A large water filter protects the pump from impurities that may be present in the water. A standard EASY!Force Advance high-pressure gun with a rotating lance, a 20m high-pressure hose on the reel, a Servopress pressure regulator and a power nozzle EASY!Force technology reduces the force needed to hold the gun trigger to zero. The device also has an EASY!Lock equipment mounting system that allows you to change equipment 5x faster than a traditional thread system. The device is completely new and factory-packed

Condition: reconditioned (used), functionality: fully functional, operating pressure: 175 bar, empty load weight: 224 kg, input voltage: 400 V, warranty duration: 6 months, temperature: 140 °C, NILFISK ALTO NEPTUNE 7-63 X2 HOT WATER PRESSURE WASHER This machine features new accessories, including a German R+M gun, a stainless steel lance, a steel braided hose, and a 25° power nozzle. The built-in hose reel makes it easy to roll up and store the hose. A durable brass head with new ceramic pistons and seals guarantees long and trouble-free operation. A highly efficient three-phase motor ensures stable operation even during prolonged use. With operating parameters of 175 bar and up to 1170 l/h, the machine can be effectively used for heavy-duty work in construction, logistics, and agriculture. Each device we offer is individually photographed; you buy exactly what you see. Kdodpfx Aheyt H Igovoi TECHNICAL DATA: Power supply voltage [V]: 400 ~ 3 phase Discharge capacity [l/h]: 1170 Operating pressure [bar]: 175 Max. Heating temperature [°C]: 100-140 Connection power [kW]: 8.3 Detergent tank [l]: 15+10 Hose length [m]: 20 Weight [kg]: 224 EQUIPMENT: BUILT-IN HOSE REEL NEW durable pressure gun from the German brand R+M NEW stainless steel pressure lance NEW reinforced 20m steel braided pressure hose NEW 25° power nozzle WATER FILTER AND GEKA CLAW COUPLINGS - FREE KEY FEATURES: Open oil system - no operating time limits Built-in chemical tank allows for dosing of cleaning fluid directly through the machine Very clear and intuitive control panel Simple design and easy access to individual components housing make the machine user-friendly and easy to service

Condition: reconditioned (used), functionality: fully functional, operating pressure: 160 bar, empty load weight: 120 kg, input voltage: 400 V, warranty duration: 6 months, temperature: 155 °C, KARCHER HDS 699 HOT WATER WASHER This device features new accessories, including a German R+M gun, stainless steel lance, steel braided hose, and a 25° power nozzle. A durable brass head with new ceramic pistons and seals guarantees long and trouble-free operation. Kedpfxeytr Ape Ahvedi A highly efficient three-phase motor ensures stable operation even during prolonged use. With operating parameters of 160 bar and 700 l/h, the machine can be effectively used for heavy-duty work in construction, logistics, and agriculture. Each device we offer has individually taken photos; you are buying exactly what you see. TECHNICAL DATA: Power supply voltage [V]: 400 ~ 3-phase Discharge capacity [l/h]: 700 Operating pressure [bar]: 160 Max. Heating temperature [°C]: 85-155 Connection power [kW]: 4.5 Cleaning agent tank [l]: 20 Hose length [m]: 10 Weight [kg]: 120 EQUIPMENT: NEW durable pressure gun from the German brand R+M NEW stainless steel pressure lance NEW reinforced 10m steel braided pressure hose NEW 25° power nozzle WATER FILTER AND GEKA CLAW COUPLINGS - FREE KEY FEATURES: Open oil system - no operating time limits Built-in cleaning agent tank allows for dosing cleaning agent directly through the machine Very clear and intuitive control panel Simple design and easy access to individual components under the housing make the machine user-friendly and easy to service Fluid tank RM110 water softener prevents corrosion and scale accumulation inside the heating coil and other pipes.

Condition: as good as new (ex-display), Year of construction: 2026, Pressure washer PTC Easypower L B similar but no Dynajet, Oertzen, Falch, Woma, Kamat, Denjet - Operating pressure: 200-700 bar - Feed rate: 13-42 l/min. - Engine: Kohler Stage V Diesel 35PS/26kW, 3400 1-min - Dimensions: 1,370 x 850 x 1,020 mm - Empty weight: approx. 260 kg - High pressure pump: HPP three-plunger pump with ceramic plungers - High quality painted steel frame with corrosion protection - Stainless steel covers - Holding device for pistol with lance - Trolly with 4 pieces industrial wheels 350mm - Electric starter - Operating hours counter - incl. 20 m high pressure hose with stainless steel quick couplings, spray gun, lance and flat jet nozzle 15 The following models are available: Easy Power L D 16/500 | 16 l/min. 500 bar Easy Power L D 23/350 | 23 l/min. 350 bar Easy Power L D 20/400 | 20 l/min. 400 bar Kdedpfjfdzy Uex Ahvei Easy Power L D 30/280 | 30 l/min. 280 bar Easy Power L D 42/200 | 42 l/min. 200 bar Easy Power L D 13/700 | 13 l/min. 700 bar

Condition: good (used), Year of manufacture 2008, 3,160 operating hours, newly serviced, very well maintained, NEW HD pump by FALCH Kdedewy Ellepfx Ahvsi

Condition: reconditioned (used), functionality: fully functional, operating pressure: 150 bar, empty load weight: 125 kg, input voltage: 400 V, fuel: electricity, warranty duration: 6 months, KRANZLE LX 2000 COLD WATER PRESSURE WASHER This device features new accessories, including a German R+M gun, stainless steel lance, steel-braided hose, and power nozzle. A built-in hose reel allows for easy rewinding and storage. A durable brass head with new ceramic pistons and seals guarantees long and trouble-free operation. A highly efficient three-phase motor ensures stable operation even during prolonged use. With operating parameters of 150 bar and 1920 l/h, the machine can be effectively used for heavy-duty work in construction, logistics, and agriculture. Each device we offer has individually taken photos; you are buying exactly what you see. TECHNICAL DATA: Power supply: 3 phase - 400 V - 50 Hz Discharge capacity (l/h): 1920 Pressure Working pressure (bar): 150 Maximum pressure (bar): 175 Connected power (kW): 9.6 Weight (kg): 125 Hose length (m): 20 EQUIPMENT: NEW durable pressure gun from the German brand R+M NEW stainless steel pressure lance NEW reinforced 20m steel braided pressure hose NEW adjustable nozzle WATER FILTER AND GEKA CLAW COUPLINGS - FREE KEY FEATURES: Open oil system - no operating time limits Very clear and intuitive control panel Kdjdpfx Aeyrfuiohvei Simple design and easy access to individual components under the housing make the machine user-friendly and easy to service

Condition: used, functionality: fully functional, We are selling a Kärcher BD 43/25 C scrubber-dryer in good, fully operational condition. Ideal for medium-sized areas in warehouses, production facilities, retail, or administration. Compact design, easy operation, and excellent drying results. Kdodpfx Aeyrd Aljhvsi

Condition: used, Year of construction: 2022, functionality: fully functional, machine/vehicle number: HD 7/16-4ST + HWE 860, This listing refers to a Kärcher high-pressure cleaner HD 7/16-4 ST in combination with a Kärcher Hot Water Generator HWE 860 (stationary unit). The machine has been inspected in our in-house workshop and is fully functional. High-Pressure Cleaner HD 7/16-4 ST / HWE 860 Kärcher Hot Water Generator Product Description: HD 7/16-4 ST With a working pressure of 160 bar, the pre-configured cold water high-pressure cleaner HD 7/16-4 ST serves as an entry-level unit in the range of our stationary HD cleaners with single-lance operation. Our pre-configured cold water high-pressure cleaner HD 7/16-4 ST comes equipped with various features and offers multiple options for individual upgrades. A dry-running protection system and an operating hours counter are included as standard. The unit allows for the suction of one or two detergents in either high- or low-pressure mode and can be optimally configured to its place of operation thanks to an extensive accessory package (see photos). With 160 bar working pressure, this high-pressure cleaner delivers more than sufficient power to tackle even very demanding cleaning tasks. Kärcher innovations such as the EASY!Force high-pressure gun, which reduces the holding force to zero by utilizing the recoil force of the high-pressure jet, and the EASY!Lock quick-release fasteners (enabling five times faster handling compared to conventional screw connections with no compromise on robustness and durability) support the user. Kärcher Electric Hot Water Generator HWE 860: The electric hot water generator HWE 860 is used in conjunction with the HD 7/16-4 ST high-pressure cleaner and heats water up to 85 °C. Operation of this unit requires proper instruction. Description: HWE 860 Kärcher Hot Water/High-Performance Heater The electric hot water generator offers an output of 24 kW. Its use is especially recommended where burner exhaust emission is problematic or not permitted. Maximum temperature is 85 °C, thermostatically controlled. The unit can be operated manually or automatically. The device is used in conjunction with a high-pressure cleaner. The hot water generator is delivered as a standalone assembly, complete with control cabinet and all necessary components (hoses, cables, clamps, etc.). Optionally, the customer can select between cold and hot water operation via two solenoid valves and opt for a digital timer during configuration. The unit can also serve as an instantaneous water heater—for example, during continuous operation at a flow rate of 700 l/h and an inlet temperature of 15 °C, a temperature of 45 °C is achieved (a temperature increase of 30 °C). TECHNICAL DATA FOR BOTH UNITS AVAILABLE ON THE NAMEPLATES. FOR FURTHER PRODUCT DETAILS ON: HIGH-PRESSURE CLEANER HD 7/16-4 ST HOT WATER GENERATOR HWE 860 WE RECOMMEND CONSULTING THE MANUFACTURER, KÄRCHER. Subject to changes and errors. Kedpfxoymdm Tj Ahvedi Do you have any questions, wish for a consultation, or want to view the equipment on-site? You can reach us by phone during our opening hours: Monday-Friday 09:00 - 13:00 and 14:00 - 17:00. Sale is exclusively under our General Terms and Conditions (GTC).

Condition: like new (used), Falch Trail Jet 15, 06/2024, as new with warranty, 232 operating hours Kdjdowz Scajpfx Ahvsi

Condition: reconditioned (used), Year of construction: 2017, functionality: fully functional, operating pressure: 180 bar, empty load weight: 195 kg, input voltage: 400 V, warranty duration: 6 months, temperature: 150 °C, NILFISK MH 7P - 180/1260 FA HOT WATER WASHER NEW HEATING BOILER Manufactured in 2017 The device features new accessories, including a German R+M gun, stainless steel lance, steel braided hose, and a 25° power nozzle. A durable brass head with new ceramic pistons and seals guarantees long and trouble-free operation. A highly efficient three-phase motor ensures stable operation even during prolonged use. With operating parameters of 180 bar and up to 1170 l/h, the machine can be effectively used for heavy-duty work in construction, logistics, and agriculture. Each device we offer has individually taken photos; you are buying exactly what you see. TECHNICAL DATA: Power supply voltage [V]: 400 ~ 3 phase Flow rate [l/h]: 1170 Max pumping capacity [l/h]: 1260 Working pressure [bar]: 180 Maximum pressure [bar]: 250 Max. Heating temperature [°C]: 90-150 Connection power [kW]: 7.6 Detergent tank [l]: 10+10 Hose length [m]: 10 Weight [kg]: 195 EQUIPMENT: NEW HEATING BOILER NEW durable pressure gun from the German brand R+M NEW stainless steel pressure lance NEW reinforced 10m steel braided pressure hose NEW 25° power nozzle WATER FILTER AND GEKA CLAW COUPLINGS - FREE KEY FEATURES: Open oil system - no operating time limits Built-in chemical tank allows for dosing of cleaning fluid directly through the machine Very clear and intuitive control panel Kdsdpfxoymmgco Ahvoi Simple design and easy access to individual components under the housing make the machine user-friendly and easy to service

Condition: reconditioned (used), functionality: fully functional, operating pressure: 180 bar, empty load weight: 159 kg, input voltage: 400 V, warranty duration: 6 months, temperature: 155 °C, KARCHER HDS 8/18-4M HOT WATER WASHER NEW COIL The device features new accessories, including a German R+M gun, stainless steel lance, steel braided hose, and a 25° power nozzle. A durable brass head with new ceramic pistons and seals guarantees long and trouble-free operation. A highly efficient, low-speed three-phase motor ensures stable operation even during prolonged use. With operating parameters of 180 bar and 800 l/h, the machine can be effectively used for heavy-duty work in construction, logistics, and agriculture. Each device we offer has individually taken photos; you are buying exactly what you see. TECHNICAL DATA: Model HDS 8/18-4M Power supply voltage: 400V ~ 3 phase Flow capacity: (l/h) 400 - 800 Operating pressure (bar) 30 - 180 Max. Water heating temperature (°C) 80-155 Connection power (kW) 5.5 Fuel tank capacity (l) 25 Cleaning agent tank capacity (l) 20 + 10 Pressure hose length (m) 10 Weight (kg) 159 Dimensions (L x W x H mm) 1330 x 750 x 1060 EQUIPMENT: NEW COIL NEW durable pressure gun from the German brand R+M NEW stainless steel pressure lance NEW reinforced 10m steel braided pressure hose NEW 25° power nozzle WATER FILTER AND GEKA CLAW COUPLINGS - FREE KEY FEATURES: Open oil system - no operating time limit Two built-in chemical tanks They allow for the dispensing of cleaning fluid directly through the machine. A clearly laid-out and intuitive control panel. A simple design and easy access to individual components under the housing make the machine user-friendly and easy to service. Kdsdpfx Ahoymln Esvsi The RM110 water softener tank prevents corrosion and scale buildup inside the heating coil and other pipes. An exhaust gas temperature sensor shuts off the engine at temperatures exceeding 300°C. When the eco!efficiency function is activated, the device heats water to 60°C, allowing for effective cleaning of even the most stubborn stains while reducing fuel consumption by approximately 20%.

Condition: reconditioned (used), functionality: fully functional, operating pressure: 180 bar, empty load weight: 158 kg, warranty duration: 6 months, temperature: 155 °C, KARCHER HDS 9/18-4M HOT WATER PRESSURE WASHER This device features new accessories, including a German R+M gun, a stainless steel lance, a steel braided hose, and a 25° power nozzle. A durable brass head with new ceramic pistons and seals guarantees long and trouble-free operation. A highly efficient, low-speed three-phase motor ensures stable operation even during prolonged use. With operating parameters of 180 bar and 900 l/h, the machine can be effectively used for heavy-duty work in construction, logistics, and agriculture. Each device we offer has individually taken photos; you are buying exactly what you see. TECHNICAL DATA: Model HDS 9/18-4M Power supply voltage: 400V ~ 3 phase Discharge capacity (l/h): 400 - 900 Working pressure (bar) 30 - 180 Max. Water heating temperature (°C) 80-155 Connection power (kW) 6.4 Fuel tank capacity (l) 25 Cleaning agent tank capacity (l) 20 + 10 Pressure hose length (m) 10 Weight (kg) 158 Dimensions (L x W x H mm) 1330 x 750 x 1060 EQUIPMENT: NEW durable pressure gun from the German brand R+M NEW stainless steel pressure lance Kjdeymffwepfx Ahvedi NEW reinforced 10m steel braided pressure hose NEW 25° power nozzle WATER FILTER AND GEKA CLAW COUPLINGS - FREE KEY FEATURES: Open oil system - no operating time limits Two built-in chemical tanks allow for the dispensing of cleaning fluid directly through the The machine is easy to use and has a clear and intuitive control panel. The simple design and easy access to individual components under the housing make the machine user-friendly and easy to service. The RM110 water softener tank prevents corrosion and scale buildup inside the heating coil and other pipes. The exhaust gas temperature sensor shuts off the engine at temperatures exceeding 300°C. When the eco!efficiency function is activated, the device heats the water to 60°C, allowing for effective cleaning of even the most stubborn stains while reducing fuel consumption by approximately 20%.

Condition: ready for operation (used), Year of construction: 1993, Flow rate: 180 - 1000 l/h Kdodoyh Hpqjpfx Ahvei Working pressure at delivery volume 16 l/min max.: 180 bar Drive motor: 380 V, 7.5 kW Space requirement: 900 x 420 x 870 mm

Condition: new, operating pressure: 160 bar, high-pressure hose length: 10,000 mm, input voltage: 400 V, overall weight: 113 kg, warranty duration: 24 months, TECHNICAL DATA OF THE HDS 7/16-4 C ANNIVERSARY EDITION WASHER: Model: HDS 7/16-4 C ANNIVERSARY EDITION Manufacturer: KARCHER Country of production: Germany Series: Professional Condition: NEW Thread type: KARCHER !EasyLock series Power supply (~/V/Hz): 3 / 400 / 50 Pressing capacity (l/h): 270 - 700 Working pressure (bar/MPa): 30 - 160 Kdedpfx Aov Tw I Tohvsi Maximum pressure (bar/MPa): 160 Maximum water temperature (°C): 80 Connection power (kW): 5.1 Power cable (m): 5 Fuel tank (l): 10 Weight (kg): 113 Dimensions (length x width x height) (mm): 1060 x 650 x 920 EQUIPMENT OF THE KARCHER HDS 7/16-4 C ANNIVERSARY EDITION WASHER: Pressure gun: Karcher Professional !EasyForce Advanced High pressure hose: Karcher Professional 10M, DN6, 250BAR - !EasyLock Spray lance: Karcher Professional 1050 mm !EasyLock Nozzle: Karcher Professional POWER pressure nozzle !EasyLock RELIABLE | DURABLE | ERGONOMIC In the offered HDS line, the main emphasis is placed on ergonomics and comfort of work. Due to its small size, the device can work everywhere where it is difficult to reach, or you often have to work in different places. Additional handles allow the device to be transported with additional equipment. The brass pump head and automatic pressure reduction system extend the life of the device. A large water filter protects the pump from impurities that may be present in the water. The standard EASY!Force high-pressure gun with a rotating lance, 10m high-pressure hose and power nozzle. EASY!Force technology reduces the force needed to hold the gun trigger to zero. The device also has the EASY!Lock equipment mounting system that allows you to change equipment 5x faster than a traditional thread system. The device is completely new and factory-packed.

Condition: new, Year of construction: 2026, functionality: fully functional, The workshop washer is a universal tool that should be found in every service, garage or workshop. It is an indispensable device for fast and inexpensive dirt removal. The possibility of using the washer in a closed room is a great advantage. Washing takes place in a closed circuit, using a washing liquid heated to a temperature of up to 70 °C. The product is discharged from the gun nozzle at a pressure of up to 8 bar, thus thoroughly cleaning hard-to-reach areas and heavily soiled parts of scale, grease or oil. Both the temperature and the fluid increase cleaning efficiency. It has adjustable, level feet. The washer is very suitable for the regeneration of turbochargers and the cleaning of heavily soiled parts made of steel, cast iron, aluminium and other alloys. The lid of the washer is equipped with pneumatic cylinders to increase the safety and quality of working with the washer. The washer has a two-function gun from which either air alone or air with detergent can be discharged. The washed object can be dried with compressed air. The washer is equipped with an intuitive control panel. The water temperature is adjustable. Infinitely adjustable air pressure. Pressure gauge. Separate switch for heating the washing liquid/water. Separate switch for power supply. Technical specifications: Capacity: 160 L Detergent heating: up to 70°C Liquid tray capacity: 8-14 L Operating pressure: 5-8bar Weight: 47 kg Dimensions: 770 x 600 x 1330 mm Kdjdpfxeuc Tn Aj Ahvei Air adjustment Pneumatic gun Illuminated cabin Ventilation We kindly inform you that the washer is for self-assembly.

Condition: new, Year of construction: 2026, functionality: fully functional, A workshop washer is a universal tool that should be found in every service center, garage or workshop. This indispensable device allows you to quickly and inexpensively remove dirt. A very big advantage is the ability to use the washer in a closed room. Cabinet parts washer ensures effective removal of various contaminants, from oils to hard-to-reach residues, ensuring safety and prolonged efficiency of components. The applied technology not only guarantees cleanliness but also provides protection against corrosion. It should be noted that cleaning results depend on the detergents used. The parts washer is designed to use up to 90 liters of cleaning solution, with a maximum tank capacity of 140 liters. To achieve maximum efficiency, the pump inlet should be covered. The pump operates in a flow range of 2.7 to 3.6 liters per minute, allowing precise cleaning of surfaces, even those with minor cracks, using a strong stream. The liquid is drawn from the bottom of the tank in a closed circuit and delivered under pressure through a flexible hose. Kdodpfx Ahsrh Ey Rsvei The workshop washer has four legs, ensuring stable operation and an optimized working height. The cover locks automatically when opened. The device is also equipped with a worktop below the tank level, which can be used to place accessories for washing or cleaned parts to allow them to dry. Assembly of the device is required. Technical data: Tank capacity 140L Maximum volume of washing liquid 90L Maximum pump efficiency 2,7–3,6 l/min Power supply 230 V Dimensions 1130x540x885 mm Tray dimensions 800x500 mm Weight 43 kg Power supply 230V We kindly inform you that the device requires self-assembly. The price is a net price. Price does not include shipping costs. For more information, please contact us by phone or e-mail. We invite you to familiarize yourself with the offer on our website.

Condition: new, Year of construction: 2026, functionality: fully functional, This cabin pressure washer made of high-quality stainless steel is a tool that raises cleaning standards to a new level. Designed with professional applications in mind, this washer offers reliability, durability and performance. Made from high-grade stainless steel, it provides durability and resistance to environmental conditions, ensuring long-lasting performance even in the most demanding working conditions. Unit description: With a robust stainless steel construction, our cabin washer is corrosion resistant and provides long-lasting performance even in harsh environments. Equipped with advanced pressure technology, it provides effective removal of dirt, oil, grease and other contaminants from a variety of surfaces. Kdedpfsuc Tpyex Ahvoi Our cabin pressure washer is an essential tool for businesses that value cleanliness, efficiency and reliability. It will make cleaning tasks easier, faster and more efficient, resulting in customer satisfaction and improved productivity. Cleaning takes place in a closed circuit, using a washing liquid heated to as much as 70 degrees Celsius. The product is discharged from the gun nozzle at a pressure of up to 8 bar, thus thoroughly cleaning hard-to-reach areas and heavily soiled parts of scale, grease or oil. Both the temperature and the fluid increase cleaning efficiency. It has adjustable, level feet. The washer is equipped with a dual-function gun from which either air alone or air with detergent can be discharged. This allows the washed object to be dried with compressed air. Using a cabin pressure washer made of stainless steel has many advantages, including: 1. thanks to the high water pressure combined with detergents, the washer removes even the most stubborn dirt such as oil, grease and rust, ensuring clean and shiny surfaces. 2. the cabin washer enables larger surfaces to be cleaned quickly and effectively in less time than traditional manual cleaning methods. 3. with different pressure setting options, the washer can be adapted to different types of surfaces and types of dirt, making it a versatile cleaning tool. 4. made from high quality stainless steel, the washer is corrosion and damage resistant, ensuring a long service life and minimising the need for maintenance. 5. the cabin washer is easy to operate, allowing operators to quickly learn how to use it and achieve professional results without lengthy training. 6. with its fast and effective cleaning, the cabin washer contributes to increased productivity, which can lead to time and cost savings for the company. Using a cabin pressure washer is not only an investment in cleanliness, but also in efficiency and durability, which translates into benefits for both companies and individual users. Parameters of the MP180 pressure washer: Washer capacity 180 litres Frequency 50 Hz Weight 56 kg Voltage 230 V Height with legs 1450 mm Height without legs 920 mm Internal width 740 mm Internal height (to open lid) 410 mm Internal depth 500 mm Loading height 360 mm Loading width 700 mm

Condition: new, Year of construction: 2026, functionality: fully functional, WORKSHOP PRESSURE WASHER MP150 Features: Washing takes place in a closed circuit, using a washing liquid. The preparation comes out of the nozzle of the gun at a pressure of up to 8 Bar, thanks to which it thoroughly cleans hard-to-reach places and heavily soiled parts with carbon deposits, greases or oils. The washer is very well suited for the regeneration of turbochargers and for cleaning heavily soiled parts made of steel, cast iron, aluminum and other alloys. The cover of the washer has been equipped with pneumatic cylinders that increase the safety and quality of work with the washer. The cabin is equipped with lighting of the working area as standard. The washer has a two-function gun, from which air alone or air with a washing agent can come out. The washed item can be dried with compressed air. *We kindly inform you that the washer is for self-assembly. Technical data Capacity: 160L Liquid tub capacity: 8-14 L Working pressure: 5-8bar Weight: 29 kg Air regulation Pneumatic gun Illuminated cabin Kedpfx Ahovugwmovsdi Ventilation working Dimensions: 770x610x700mm

Condition: new, Year of construction: 2026, functionality: fully functional, A workshop washer is a universal tool that should be found in every service, garage or workshop. It is an irreplaceable device for quick and inexpensive removal of dirt. A very big advantage is the possibility of using the washer in a closed room. The parts washer is a guarantee of effective removal of all contaminants, from oils to hard-to-reach deposits, while ensuring safety and long-term performance of the components. The technology used guarantees not only cleanliness, but also protection against corrosion. It should be noted that the cleaning effects will depend on the detergents used. The parts washer is made to use up to 60 liters of cleaning agent, with a maximum tank capacity of 80 liters. To achieve maximum efficiency, the pump inlet should be covered. The pump operates in a flow range of 10 to 12 liters per minute, which allows for thorough cleaning of surfaces, even those with small cracks, using a strong stream. The liquid is drawn by the pump from the bottom in a closed circuit and fed further under pressure through a flexible hose. The workshop washer has 4 legs, thanks to which we have stable operation and an optimized working height. The cover locks automatically after opening. The device is also equipped with a worktop below the level of the bathtub, which can be used to place washing accessories or washed parts so that they can be left there to dry. The device requires self-assembly. Technical data: Bathtub capacity 80L Maximum pump capacity 10-12 l/min Kdsdpfx Aevugvvjhvoi Power supply 230V Dimensions 775x540x915mm Overall dimensions inside 710x480x260mm Shelf under the bathtub 700x420mm Power supply 230V Weight 23kg

Condition: new, functionality: fully functional, machine/vehicle number: 1.286-960.0, operating pressure: 250 bar, high-pressure hose length: 10,000 mm, empty load weight: 70 kg, input voltage: 400 V, warranty duration: 24 months, The HD 10/25-4 S Plus cold water high-pressure cleaner is ideal for ergonomic and user-friendly operation. With the Kärcher EASY!Force Advanced trigger gun, it can be operated comfortably without holding the gun. Pressure and water flow can be adjusted using the Servo Control regulator between the lance and trigger gun. The pressure reduction allows for quick response to sensitive surfaces – without changing the nozzle. In addition, the Vibrasoft rotor nozzle significantly reduces vibrations on the spray lance. Assistance systems and an LED status display simplify operation. Technical Specifications: Condition: NEW Catalog Number: 1.286-960.0 Current Type (Ph/V/Hz): 3 / 400 / 50 Flow Rate (l/h): 500-1000 Working Pressure (bar): 80 - 250 Maximum Pressure (bar): 280 Inlet Temperature: max. 60°C Power Rating (kW): 8.8 Connection Cable (m): 5 Weight (with accessories) (kg): 70.3 Dimensions (L × W × H) (mm): 607 x 518 x 1063 Kodpfx Ahexpf Hxovjdi Included: Handgun: EASY!Force Advanced + Softgrip Insert Hose: 10m DN8, 315 bar - Premium Quality Spray Lance: 1050 mm Power Nozzle Dirt Blaster Servo Control Features: 4-pole three-phase motor with air and water cooling 3-piston axial pump: with stainless steel pistons Pressure shut-off Integrated fine water filter Oil level sight glass Brass water inlet Design: - Compact upright design concept thanks to vertically mounted motor and pump unit - Small footprint and space-saving external dimensions. Easy to maneuver and transport. Maximum stability ensures the device remains stable. - Slow-running 4-pole motor with water and air cooling, robust pump with stainless steel pistons and brass cylinder head - Long service life with low maintenance costs. High performance with high efficiency. With suction function and water temperature up to 60°C. Advantages: - Ergonomic Vibrasoft dirt blaster, reduces vibrations by up to 30%. Reduces noise and sound levels. Enables effortless and extended work with the rotary nozzle. - Assistance systems and LED status display - Pressure and water flow are adjustable using the servo control regulator between the lance and gun.- EASY!Force Advanced for fatigue-free work without holding forces.

Condition: as good as new (ex-display), Year of construction: 2025, operating hours: 1 h, High pressure cleaner PTC CJ-2B similar but no Annovi Reverberi, Comet, Dibo, Ehrle, Frank, Kärcher, Kränzle, Nilfisk, Oertzen, Walter, Weidner ... - Operating pressure: 130 bar Kodpfx Ahegigqxsvedi - Flow rate: 32 l/min. - Engine: Honda GX390 petrol 8,7kW - dimensions: 1160 x 580 x 710 mm - Empty weight: approx. 80 kg - High pressure pump: Comet three plunger pump with ceramic plungers - Robust steel frame - Practical holding device for gun with lance - Pressure gauge - Built-in professional relief valve - Manual stainless steel hose reel with 30 m HP hose 3/8" + 10 m HP hose 3/16" - 2 pieces 3/8" and 1 piece 1/8" F pipe cleaning nozzles - Gun with wash lance and flat spray nozzle The CJ-2B is a professional mobile pressure washer ideal for cleaning and unclogging pipes 40 to 200 mm. Ideal for cleaning and removing pipe blockages from house connections, cesspits, cisterns and industrial waste. The powerful Honda engine with a power of 8.7 kW and the Comet TW Premium pump with speed control guarantee maximum performance and reliability over time. This machine represents the optimal solution for professionals looking for an efficient and powerful machine, able to face the most demanding work situations thanks to the robust steel frame and the large pneumatic tyres.

Condition: new, Year of construction: 2025, operating hours: 30 h, operating pressure: 2,800 bar, pressure: 2,800 bar, fuel: diesel, overall weight: 2,800 kg, HAMMELMANN AQUA JET 144 Kedpfeyki U Rex Ahvsdi Year: 11/2025 NEW MACHINE UNDER WARRANTY I have 5 machines from 2025 for sale Available for immediate delivery

Condition: used, Year of construction: 1993, machine/vehicle number: 4803678, overall weight: 11,200 kg, Equipment for washing industrial tanks under high pressure. KONGSBERG OFFSHORE, LARGE UMBILICAL REEL 37 LINE, serial number 01. Kdodpfx Asvyfmqjhvji