MP150 workshop washer

CORMAK MP150

Condition: new, Year of construction: 2026, functionality: fully functional, AURORA MP150 Pressure Parts Washer The AURORA MP150 pressure parts washer is a compact workshop cleaning machine designed for cleaning mechanical parts, tools, and components. The enclosed working cabinet helps reduce liquid splashing, while the operating pressure of 5–8 bar makes it easier to remove oil, grease, carbon deposits, and other stubborn contaminants. The parts washer uses a closed-loop cleaning solution system, allowing the cleaning fluid to be reused during ongoing work. The dual-function pneumatic gun enables both cleaning with a mixture of cleaning solution and compressed air and subsequent blow-off and drying of cleaned components. AURORA MP150 Workshop Parts Washer – Key Advantages 5–8 bar operating pressure – effectively removes oil, grease, carbon deposits, and other contaminants, including from hard-to-reach areas. Dual-function pneumatic gun – enables cleaning with cleaning solution and compressed air, as well as blow-off cleaning using compressed air alone. Closed-loop cleaning solution system – helps reduce cleaning agent consumption during regular operation. Lredpfxjztwg Ss Af Sst Working cabinet lighting – provides better visibility of cleaned surfaces, openings, and hard-to-reach areas. Integrated work gloves – make it easier to handle components without opening the cabinet. Lid support cylinders – make opening and closing the working chamber easier. Cabinet ventilation – supports air circulation while the machine is operating. Compact benchtop design – the parts washer can be placed on a stable and sufficiently strong table or workbench. Parts Cleaning Concentrate Included The MP150 parts washer comes with 2 liters of concentrate for workshop parts washers. When preparing a 10% solution, the concentrate is sufficient to produce up to 20 liters of ready-to-use cleaning solution. The appropriate concentration should be selected according to the type of surface, the nature of the contamination, and the cleaning method used. Recommended Solution Concentration Immersion cleaning: 5–10% Low-pressure cleaning: 2–10% High-pressure cleaning: 2–5% Concentrate pH value: 12.8 Parts Washer with Dual-Function Pneumatic Gun The AURORA MP150 is equipped with a pneumatic gun featuring two operating modes, allowing a single device to perform both thorough cleaning and blow-off drying of components. In cleaning mode, a mixture of cleaning solution and compressed air is discharged from the nozzle. The pressurized stream helps remove contaminants from openings, channels, recesses, and surfaces with complex shapes. After cleaning, the gun can be switched to blow-off mode. Compressed air removes residual cleaning solution from surfaces and hard-to-reach areas, making it easier to prepare components for further use, inspection, repair, or assembly. The AURORA MP150 Parts Washer Comes as Standard With Dual-function pneumatic gun Integrated work gloves Interior cabinet lighting Ventilation system Lid support cylinders Compressed air supply adjustment 2 liters of concentrate for workshop parts washers Technical Specifications Specification Value Cabinet capacity 150 l Cleaning solution tank capacity 8–14 l Operating pressure 5–8 bar Dimensions 770 × 610 × 700 mm Weight 29 kg Gun Dual-function pneumatic Cabinet lighting Yes Ventilation Yes

Condition: good (used), Year of construction: 1956, Heavy lathe, turning machine, lathe, center and feed screw lathe, center and feed screw lathe -Manufacturer: Weisser, lead screw lathe type PF200 -Turning length: 1340 mm -Turning Ø over bed: 420 mm -Turning Ø over support: 240 mm -Spindle bore: Ø 41 mm -Spindle speeds: 31.5 - 1400 rpm -Three-jaw chuck: Röhm Ø 250 mm -Accessories: incl., see photos -Tailstock mount: MK4 -Drive motor: 2.5/3.5 kW -Dimensions: 2670/1000/H1230 mm Lodpotzf N Refx Af Ssrt -Weight: 1450 kg

Condition: reconditioned (used), Year of construction: 1997, functionality: fully functional, machine/vehicle number: 690924, Connected power: 380V, 1.84kW Speed: 2840 rpm Number of spindles: 21 pieces, pitch 32 mm Spindle spacing: 640 mm Spindle rotation direction: 11x right, 10x left, M10 thread 2x safety chucks pneumatic foot valve Lrodpfx Aeh U Damef Sjt Table size: 880 x 400 mm 1x side fence with 2 folding stops 1x base fence 1x miter fence Unfortunately, we cannot respond to inquiries that do not contain complete contact information.

Condition: excellent (used), Year of construction: 2008, functionality: fully functional, Soraluce model FL8000 high performance travelling column, floor type CNC milling machine TRAVEL (X) 7,500 mm TRAVEL (Y) 1,400 mm TRAVEL (Z) 1,000 mm RAPID TRAVERSE (X,Y,Z) 25,000 mm/min WORKING FEED RANGE (X,Y,Z) 1 – 10,000 mm/min ACCELERATION RATE (Instantaneous not maximum) 1 m/sec2 SPINDLE SPEED 20 - 4,000 Rpm SPINDLE TAPER ISO 50 SPINDLE POWER 28 Kw NC15C - HEIDENHAIN iTNC 530 (Flat 15.1" TFT Screen with digital drives). Single processor version. Prepared for a machine of 10 motors (9 CNC axes + spindle motor). Main push button panel with individually operated push buttons for linear axes (X+, X-, Y+, Y-, Z+, Z-) K20 option for the i530M. Independent AC. Heidenhain digital drive servomotor for each axis HEIDENHAIN HR-410 portable electronic handwheel with 5m spiral cable Automatic Indexing head 28Kw, 760Nm, 0.001°x 0.001°, 4000 Rpm. Continuous air and oil mist lubrication system for head gears. Automatic Tool Clamping device – 15,000N. Automatic hydraulic tool releasing device Spindle taper: BT50 High Torque spindle motor 28kW, 100% ED, digital motor. R10 – ZF gearbox two speed including cooling unit Spindle Speed Range 20 – 4,000Rpm Rapid Feed X-Y-Z axes 25.000mm/min Working Feed range X-Y-Z axes 0 - 10.000mm/min Acceleration rate X- Y -Z axes 1 m/s2 (instantaneous, not maximum) Hydraulic counterbalance system for head/ram assembly X axis driving system by two servomotors, two gearboxes and a double rack & pinion Preloaded ballscrews with double recirculating nuts in Y and Z axes. Automatic centralized lubrication system. Linear Guiding System with recirculating cylindrical rollers in each axis. Automatic centralized lubrication system for the guides. HEIDENHAIN Linear measuring scales in X-Y-Z axes with compressed air purge system - (Precision +/- 0,005mm) H48 – Coolant through the spindle type AD. M3 – Automatic tool changer 40 stations. M6 – Horizontal-vertical tool changing facility. M8 – Motorized tool changing device. Tool changer is driven by a servo motor Hydraulic equipment Ljdsw U Tlzspfx Af Ssrt Front metallic roller blind cover to both upper and lower ram area, together with metallic protection to the lateral side of the column, between the machine table and the rear guideway support, which protects the vertical movement of the ram. CE10 - PROTECTION on the back and both lateral sides of the machine column P20 - Operator's platform fixed to the column and travels together with it in the "X" axis direction. The main operator’s panel is mounted within the operator's platform area for machines without an operator’s pendant and is accessed from the rear of the machine. D7 + D50A - Coolant system with 1000L capacity tank with two pumps providing high and low pressure providing 5 & 12bar and 50L/min flow rate. Paper and Magnetic filtering. E30A – swarf conveyor FL8000 Hinge conveyor belt. Width 350mm PW11B – Pendulum working area system. PM2 x 2 – Machine prepared by Soraluce for the inclusion of two rotary tables. Working area lighting. Electrical cabinet cooling system Electrical cabinet lighting Working methods - According to CE safety regulations Filter to assure electromagnetic compatibility. Protection to both sides of the column with security bumpers Anchoring Bolts Standard Colour - Blue RAL 5005 / Grey RAL 7035 K19 – Two sets of machine documentation (One hard copy, one on CD ROM) Floor plate 8,000 x 1,500 x 300mm

Condition: used, functionality: limited functionality, 1.Equalizer. - shaft width 260 mm - length of tabletops 1560 mm 2.Thicknessing machine - thickness of the workpiece 180mm 3.Drilling machine - max tool diameter 18 mm - drilling depth 80 mm - drilling width 140 mm - table top adjustable up/down front/back and sideways 4.Circular saw - NO SAW BLADE Lredpfsqwg Efsx Af Sjt 5.Milling machine - Spindles 30 mm - Adjustable spindle CONDITION AND COMPLETENESS AS IN PICTURES

Condition: refurbished (used), Year of construction: 2001, functionality: fully functional, Completely overhauled, 12-month warranty, available immediately. Equipped with a safety system for solvent-based substances in accordance with DIN 1539, including exhaust fan, supply air cage filter, as well as concentration monitoring and a recirculation air filter wall in the interior. - Internal dimensions (W x D x H): 1000 x 1000 x 1500 mm - External dimensions (W x D x H): 1900 x 1430 x 2315 mm - Capacity: 1500 liters Lrsdpfx Ajvcb U Asf Set - Tmax: 300°C - Eurotherm controller 2404 (20 programs, each with 16 segments) - Eurotherm recorder - Connected load: 29 kW - 6 wire shelves included, plus V2A support brackets - Minimum exhaust air flow rate: 360 m³/h - Maximum permissible solvent quantity: 36g at nominal temperature of 300°C - With concentration monitoring - New window seals - Net weight approx. 1200 kg - Includes documentation, CE declaration - Electrically tested and with DGUV test protocol Inspection in our warehouse by appointment. We offer new and used industrial ovens. Get in touch with us! Oven, ovens, drying oven, furnace, heat oven, heating cabinet, industrial oven, paint dryer, annealing oven, heating oven, tempering oven, drying cabinet, chamber oven, baking oven, recirculation drying cabinet, recirculation oven, solvent oven, chamber recirculation oven

Condition: good (used), Regularly maintenanted telescop loader with bucket and snow blower Ledpeycwyfjfx Af Sjrt

Condition: used, Modular milling cutter Module 8 20 degrees Lodpsdklt Nsfx Af Sjrt Length 1800 mm Diameter 120 mm Inner diameter 40 mm

Condition: used, Year of construction: 1989, Technical details: bore capacity in steel (diameter): 28 mm throat: 285 mm bore stroke: 165 mm drill capacity in cast iron: Ø 35 mm spindle taper MT: MK 3 spindle speed:: 65 - 1.750 / 4x steples U/min feed: 0,1; 0,2; 0,3 manuell/automatisch mm/U Distance spindle/table max.: 80 - 680 mm table clamping surface:: 500 x 370 mm table rotating: 360 ° drill table adjustment: 600 vertical mm column diameter: Ø 130 mm total power requirement: 7,5 kW Lrodpfx Afsu Idkze Sst weight of the machine ca.: 273 kg dimension machine xH: 0,9 x 0,6 x 1,9 m The machine can cut threads, change of direction left/right selectable via foot switch and/or depth stop Table can be swiveled and adjusted in height. *

Condition: new, Year of construction: 2023, functionality: fully functional, type of input current: three-phase, travel distance X-axis: 1,400 mm, travel distance Y-axis: 650 mm, travel distance Z-axis: 610 mm, workpiece weight (max.): 1,400 kg, total height: 2,492 mm, total length: 4,367 mm, total width: 3,070 mm, table length: 1,500 mm, table width: 650 mm, spindle motor power: 11 W, rapid traverse Z-axis: 24 m/min, rapid traverse X-axis: 30 m/min, rapid traverse Y-axis: 30 m/min, spindle nose: Iso 40, spindle speed (max.): 8,000 rpm, spindle speed (min.): 40 rpm, tool diameter: 75 mm, tool length: 250 mm, Equipment: documentation/manual, rotational speed infinitely variable, NEW vertical machining center "AWEA BM-1400 II" with FANUC 0i-MF Plus CNC Accessories present: 4th axis interface Air blow system Lrsdpfx Aforg Htps Set Left side auger chip conveyors Coolant through spindle ( CTS ) at 20 bar Coolant gun Fairing bottom washing system 390 liter refrigerant collection tank Automatic power-off system Alarm light & work light