Used heating & cooling units for sale (164)

Year of construction: 2025, condition: as good as new (ex-display), Air-cooled process chiller: refrigerant R32 Cooling capacity 72 kW at 7/12°C, internal P3 pump, internal 410-liter tank, winter package for ambient temperatures down to -25°C for outdoor installation, includes speed-controlled fans. Large Dixell display with protective cover. Isdpfx Afjf H A Eyoueba

Year of construction: 2015, condition: excellent (used), The temperature control unit is for sale ;2015- the new price was 4995€ Medium : Water Functions - Function for self-optimizing temperature control - Function and fault displays - User-dependent and password-protected rights - Limit comparator (tolerance band monitoring of the actual value with alarm message) - Adjustable setpoint limit - Weekly timer - Automatic heating and cooling program - Freely selectable ramp function for temperature changes during heating and cooling - VNC server via Ethernet (enables complete operation and management from the PC) - 2nd temperature setpoint - Tool management (setpoints and control parameters can be be saved as a recipe) - Measured value recording for quality assurance (actual values can be be output to SD card with time stamp) - Electronic level monitoring with dry run protection Isdpfxsm Dtm As Afujba - Automatic filling and replenishment with leakage and level function monitoring level function monitoring - Automatic venting Monitoring/safety - Short-circuit-proof controller and control outputs - Temperature sensor in circulating medium flow and return - Safety temperature limiter to prevent overheating and Safety valves against overpressure - Contactless heating control with solid state relay - Safety temperature reduction when switching off - Acoustic and visual warning signal with symbol and text text on the touch screen- Symmetrical mains load with three-phase drive and three-phase heating elements three-phase current heating rods - 3-fold safety shutdown of the heater - Reversible circuit breakers and motor protection switch - Dirt trap in the cooling water supply Hydraulics - Continuous cooling via motor valve

Year of construction: 2003, condition: used, Oil temperature control unit Year: 2003 – like new Medium: Oil Ibsdpfx Aszcat Ujfuoa Model: TT-288 / MP794 Up to 250°C Cooling capacity approx. 60 kW at 250°C

Year of construction: 2003, condition: used, Brand: TOOL TEMP Stock: 1 Year: 2003 Ibsdpfozcanxjx Afusa Power: 7000 W Water filling tank: approx. 150 litres With circulation pump Overall dimensions: 1350 x 800 x H 1550 mm Cooling capacity: approx. 25 kW

Condition: used, Cooling unit, cooling water recooler, water chiller, chiller O. Hellwig Year of manufacture: approx. 1995 Cooling capacity: approx. 8 kW Rated power of cooling unit: 3 kW Refrigerant: R422D Ibsdpfx Afopu R Nceuja Water tank volume: approx. 35 liters Circulation pump flow rate: 40 liters/min Pump output: 0.63 kW Water connections: 1/2 inch Power supply: 380 Volt, 50 Hz - Temperature setting via rotary potentiometer Space requirement (L x W x H): 1100 x 750 x 140 mm Weight: 285 kg

Condition: used, Year of construction: 2009, machine/vehicle number: 090924, Temperature control unit manufactured by Single, used and untested. The device is intended for applications in tool temperature control, injection molding, and industrial process engineering. It operates as a single-circuit system with an SBC control system. The medium used is water*; the maximum flow temperature is 30 °C. Heating output is not specified; pump performance is 28 l/min at 3.2 bar*. Year of manufacture is 2009, and the total weight is 105 kg. Isdpsy Su Efefx Afuoba

Condition: used, machine/vehicle number: 0926292, Year of construction: 2009, Temperature control unit manufactured by Single, used and untested. The device is intended for applications in tool temperature control, injection molding, and industrial process engineering. It operates as a single-circuit system with an SBC control system. The medium used is water*; the maximum flow temperature is 30 °C. Heating output is not specified; pump performance is 28 l/min at 3.2 bar*. Year of manufacture is 2009, and the total weight is 105 kg. Iedsy Su D Uopfx Afujba

Condition: used, Year of construction: 2011, machine/vehicle number: 408529.10.000/01, Temperature control unit manufactured by Hahn Automation, used and untested. Designed for applications in tool temperature control, injection molding, and industrial process engineering. Operates as a single-circuit system with REMAK control system. The working medium is water*, with a maximum flow temperature of 95 °C*. Heating capacity is 27 kW, pump capacity is 60 l/min at 4.5 bar*. Year of manufacture: 2010, total weight: 130 kg. Iodpfx Afey Su A Rjusba

Condition: used, Year of construction: 2011, machine/vehicle number: 253321-01-03, Temperature control unit by gwk, pre-owned and untested. Designed for mold temperature control, injection molding, and industrial process technology applications. Operates as a single-circuit system with the Logotherm control system. The unit uses water* as the heat transfer medium, with a maximum supply temperature of 30 °C*. Heating capacity is not specified; pump capacity is 35 l/min at 3.5 bar*. Year of manufacture: 2011. Total weight: 200 kg. Ijdpfx Afoy Su Aqjuoba

Condition: used, Year of construction: 2011, machine/vehicle number: 253321-01-04, Temperature control unit by gwk, used and untested. Designed for tool temperature regulation, injection molding, and industrial process engineering. Operates as a single-circuit system with Logotherm control. Uses water* as the medium, with a maximum supply temperature of 30 °C. Heating capacity not specified, pump delivers 35 l/min at 3.5 bar*. Year of manufacture: 2011. Total weight: 200 kg. Iodpfx Afoy Su Adeueba

Condition: used, Year of construction: 2013, machine/vehicle number: 18575 / 2013, Temperature control unit from manufacturer Robamat, used and untested. The unit is designed for application in tool temperature regulation, injection molding, and industrial process engineering. It operates as a dual-circuit system with the Thermocast 4212 control system. Oil* is used as the medium, with a maximum supply temperature of 320 °C. Heating capacity is 2x 34 kW*, pump output is 75 l/min at 5.0 bar*. Year of manufacture: 2013. Total weight: 350 kg. Ibodpfjy Suz Tsx Afuja

Condition: used, Year of construction: 1999, machine/vehicle number: 14490/99, Temperature control unit by Robamat, used and untested. Designed for mold temperature control, injection molding, and industrial process engineering applications. The unit features a dual-circuit system with a Thermocast 4212 control system and two µP103 Mega control units. Operating medium: oil*. Maximum flow temperature: 320 °C. Heating capacity: 2x 34 kW*. Pump output: 75 l/min at 5.0 bar*. Year of manufacture: 1999. Total weight: 350 kg. Ijdpfxjy Surfs Afusba

Condition: used, Year of construction: 2001, machine/vehicle number: 14947/01, Temperature control unit from manufacturer Robamat, used and untested. The unit is intended for applications in tool temperature control, injection molding, and industrial process engineering. It operates as a multi-circuit system with Thermocast 4212 control system. The medium used is oil*, with a maximum supply temperature of 320 °C. Heating capacity is 34 kW*, pump capacity is 75 l/min at 5.0 bar*. Year of manufacture: 2001, total weight: 350 kg. Ibjdpey Sukuefx Afuja

Year of construction: 2021, condition: used, machine/vehicle number: 117500730003, Temperature control unit from manufacturer Regloplas, used and untested. The device is designed for applications in tool temperature control, injection molding, and industrial process technology. It operates in a dual-circuit system with the RT100 control system. The medium used is pressurized water, with a maximum supply temperature of 160 °C. Heating capacity is 38 kW, pumping capacity is 2x 60 l/min at 6.0 bar. The unit features two magnetic coupling pumps (Speck CY-4281). Year of manufacture: 2021, total weight: 230 kg. Iedpey Suikefx Afujba

Year of construction: 2021, condition: used, machine/vehicle number: 117500730004, Temperature control unit by Regloplas, used and untested. The device is intended for applications in mold temperature control, injection molding, and industrial process engineering. It operates as a dual-circuit system with the RT100 control unit. The medium used is pressurized water, with a maximum supply temperature of 160 °C. Heating capacity is 38 kW, and pump performance is 2 x 60 l/min at 6.0 bar. The unit is fitted with two pumps (CY-4281.0823). Year of manufacture: 2021. Total weight: 230 kg. Iedjy Suhyspfx Afujba

Condition: used, machine/vehicle number: 371353, Temperature control unit from manufacturer Regloplas, used and untested. The device is designed for tool temperature regulation, injection molding, and industrial process engineering applications. It operates as a multi-circuit system featuring the RT 45 control unit and has two separate circuits. The unit uses oil as the heat transfer medium, with a maximum flow temperature of 300 °C. Heating output is 27 kW, pump capacity is 60 l/min at 3.5 bar. Year of manufacture is unknown. Total weight is 265 kg. Iodpfxey Subyo Afujba

Condition: used, machine/vehicle number: 0237000916, Temperature control unit by manufacturer Regloplas, used and untested. The device is suitable for tool temperature control, injection molding, and industrial process engineering applications. It operates as a multi-circuit system with the RT50 control system and features 2 circuits. Oil is used as the heat transfer medium; the maximum supply temperature is 300 °C. Heating power is 27 kW, pump output is 60 l/min at 3.5 bar. Year of manufacture is 2004, total weight is 265 kg. Isdpjy Subgsfx Afuoba

Operating hours: 38,526 h, condition: used, machine/vehicle number: 23-06757-2, Temperature control unit from the manufacturer Tool-Temp, used and untested. The unit is designed for mold temperature control, injection molding, and process engineering applications. It operates in a single-circuit system with the TT-380 controller. The medium used is oil*, with a maximum supply temperature of 360°C*. Heating capacity is 24 kW*, and pump performance is 90 l/min at 5.5 bar*. The unit is fitted with a K21R 90 S 2 motor. Recorded operating hours are 38,526; year of manufacture is unknown. Ibodpfx Aoy Suavefuoa

Operating hours: 13,241 h, condition: used, machine/vehicle number: 24-02577-4 / TT-380, Temperature control unit by Tool-Temp AG, used and untested. This device is suitable for tool temperature regulation, injection molding, and process engineering applications. Operates with oil and water as heat transfer media in a single-circuit system. Maximum supply temperature is 360°C (oil) or 90°C (water), with a heating capacity of 24 kW. The pump delivers up to 90 l/min at 6.0 bar; the control system is MP-888. Operating hours are specified at 13,241, year of manufacture unknown. Accessories include a digital hour meter, analog pressure gauge, transport castors, and crane lugs for loading. Ibjdpjy St Urjfx Afuja

Year of construction: 2008, condition: excellent (used), functionality: fully functional, PSG Hotrunner Controller 8 fases Iodeza H Elopfx Afuoba In very good condition Included 24-pin Cable

Condition: like new (used), Fiege 8-zone hot runner controller with connection cable and Harting connector. Isdpfx Afeyr Eiteueba

Condition: refurbished (used), Year of construction: 2007, functionality: fully functional, overall weight: 50 kg, type of input current: three-phase, power: 12 kW (16.32 HP), year of last overhaul: 2026, Type: TP-DIRECT: 120 Power: 12 kW Maximum operating temperature: 120 °C Isdpfx Asy Uvwbofueba Medium: Water Temperature control unit Three units available Price: 700 EUR per unit

Year of construction: 2013, condition: ready for operation (used), functionality: fully functional, The teco th 140 temperature control unit from GWK with indirect cooling is up for sale; it offers a wide range of features which I can provide upon request. The hose lines are also included. The unit will be inspected by GWK prior to delivery, with inspection costs already included in the sale price. Ibsdpfxjx Dcd Ro Afusa Medium: Heat transfer oil, Marlotherm SH Heating capacity: 27 kW at up to 350°C Cooling capacity, indirect: 110 kW Pump: 150 l/min at max. 7 bar Cooling via bypass with 3-way motorized controller Shut-off valve on supply and return Connection for PT 100 sensor Internal drip tray Dimensions: L: 1320 mm, W: 570 mm, H: 1720 mm Weight: 410 kg

Condition: excellent (used), Spot welding tongs Dalex Type 3011/2 Throat depth 250 mm Ibsdsy Inwgepfx Afuoa Rated power 2.4 KVA 380 Volt

Condition: new, Year of construction: 2026, functionality: fully functional, power: 11 kW (14.96 HP), A triple pass rotary drum dryer is a type of industrial dryer that is used to reduce or remove moisture from a material. It gets its name from the three rotating drums through which the material passes, each with a different purpose in the drying process. This type of dryer is commonly used in the production of various bulk solids, including minerals, agricultural products, and biomass. Here are the key features and components of a triple pass rotary drum dryer: 1. Triple Pass Design: - The material being dried passes through three rotating drums or cylinders, hence the term "triple pass." Each drum serves a specific purpose in the drying process. Ibedeq Nfuzepfx Afuja 2. Material Flow: - The material enters the dryer and first passes through the innermost drum. After the initial drying phase, it moves to the middle drum and then to the outer drum, undergoing additional drying in each pass. 3. Heat Source: - Heat is typically provided by a combustion system, such as a burner or furnace, located at one end of the drum dryer. The hot gases generated by the combustion process flow through the rotating drums, transferring heat to the material. 4. Air Flow: - The dryer is designed to optimize air flow through the drums, ensuring efficient drying. In a triple pass design, the material and hot gases move counter-currently through the three drums, enhancing heat transfer and drying efficiency. 5. Lifting Flights or Lifters: - Lifters are internal components inside the drums designed to lift and cascade the material as it rotates. This movement promotes good heat transfer and uniform drying. 6. Retention Time: - The triple pass configuration allows for an extended retention time of the material in the drying system. This longer exposure to heat enhances the drying efficiency, making the triple pass rotary drum dryer suitable for materials with high moisture content. 7. Cooling Section: - After the material completes the three passes and reaches the end of the drum dryer, a cooling section may be included to reduce the temperature of the dried material before it is discharged. 8. Applications: - Triple pass rotary drum dryers are used in various industries, including agriculture (drying crops like grains), minerals (drying ores or concentrates), and biomass (drying wood chips or other organic materials). 9. Efficiency and Energy Consumption: - Triple pass rotary drum dryers are known for their high efficiency due to the extended drying time and effective heat transfer. However, they may have higher energy consumption compared to single or double pass dryers. When selecting a triple pass rotary drum dryer, it's essential to consider factors such as the type of material to be dried, required moisture reduction, and overall processing requirements. Proper design and operation are crucial to achieving optimal drying performance. Technical details We have different options for different requirements, please contact our team for more info.