MS-Maschinenbau-u.Vertriebs GmbH

Condition: reconditioned (used), - 2- Paul short tables in front of the double hemmer - Double hemmer KME 2 - 30 KW saw motor Kolhcev Abcmscqnedk - 750 mm passage width - 125 mm cutting height - Fixed and adjustable bushing - Slat bushing - Shaking chute under the saw - Hydraulic width adjustment - Spiral roller table - Drive from the double hemmer - 1 piece of separating slat

Condition: reconditioned (used), - 150 mm cutting height Kjlhccjvkf Naeqnodk - 500 mm cutting depth - Pneumatic saw stroke - 2 roller conveyors approx. 4,000 mm long - 500 mm roller width - 3 adjustable length stops

Condition: reconditioned (used), - Paul cross-cut saw 17 AP - pneumatic saw stroke - 150 mm cutting height - 400 mm max. cutting width Kdslevkfuishccqnek - 2 non-driven roller tables, each 2,000 mm long

Condition: new, Year of construction: 2024, max. cutting height 160 mm max. cutting width 600 mm min./max. trimming width 25-300 mm Adjustment times of the widths 0.2-1.0 sec. Feed rate 5-30 (70) m/min. Saw motor 37 KW Feed motor 2.2 kW Electric height adjustment of the top rollers 2 lasers Kjlhjvdcc Rjccqnodk Splitting wedges in the machine Fixed bush Adjusting bush Cutting width display Automatic width adjustment Saw shaft diameter 70 mm Weight 3.500 kg Available at short notice

Year of construction: 2024, Condition: new, - 260 mm cutting height - 750 mm cutting width - 5-30 m/min stepless feed Kdslhccqovdahwonsk - 2x75 sawing motors - 3 KW feed gearbox - 70 mm soindle diameter - 400 mm sawblade diameter - 5000 Kg weight

Condition: new, Year of construction: 2024, working width: 600 mm, saw blade bore: 70 mm, max. cutting height 160 mm max. cutting width 600 mm feed 5-30 m/min. Saw motor 55 KW feed motor 2,2 kW max. saw blade insert at 145 mm 6 Saw shaft diameter 70 mm CE compliant design Control cabinet and control panel Weight 3,200 kg Kdelhcovcn D Rocqnek Special equipment - Electric height adjustment of the feed rollers

Condition: reconditioned (used), - 2- Paul short tables in front of the double edger - Double edger KME 2 - 30 KW saw motor - 750 mm passage width - 125 mm cutting height - Fixed and adjustable bush - Slat bush - Shaking chute under the saw - Hydraulic width adjustment Kdolhsu Stpuoccqnok - Spiral roller table - Drive from double edger - 1 STK separating slat - roof chain conveyor - 5 discharge lines - Board sorting - incl. alignment roller conveyor - mechanically adjustable length sorting

Condition: new, Year of construction: 2025, - Dimensions 600 x 3,000 mm - M 56 conveyor chain with protective rollers and MS flights - 2.2 KW SEW gear motor for the feed chain drive - Automatic centering of the logs to the center of the rotor - Dimensions 1,500 x 4,500 mm - Machine for 6 - 35 cm logs - 18.5 KW drive motor for the rotor - 4 pre-cutters - 4 main cutters - each with hydraulic pressure system - 1 pair of centering rollers in front of the rotor - 1 centered pair of rollers after the rotor - 4 KW SEW geared motor for driving the rollers Kolhceu Rpibjcqnjdk - 30 m/min feed speed - 1 pair of non-driven rollers in the pull-out

Condition: reconditioned (used), Setting attachment - suitable for circular saw blades up to 1,000 mm - new dial gauge - workshop tested Kdjlheu Rmtwsccqnek - newly painted

Condition: reconditioned (used), Functionality: fully functional, approx. 4.5 m long infeed and centering table Kdolhcceu Hmacoqnek Drive via chain from the feed motor Centers the logs in the middle of the rotor Debarking machine VK 26 4 main cutters 4 pre-cutters 30 KW main motor 11 KW feed unit non-driven extraction table Machine workshop checked Machine cleaned and repainted

Condition: not inspected (used), Year of construction: 1981, Functionality: unexamined, machine/vehicle number: 3124, Trimming saw Esterer DKV-5S Kjlhouy Ib Isccqnedk year of construction 1981 55 KW saw motor with ASV/B pull-out system year of construction 1981

Condition: not inspected (used), Year of construction: 1981, Functionality: unexamined, machine/vehicle number: 8124, Esterer VET-S Kdslhjuy H T Neccqnjk Year of construction 1981 serial no. 8124

Condition: reconditioned (used), - suitable for circular saw blades up to Ø550 mm - new dial gauge - good condition - incl. base frame Keleugfx Iohccqnsdk

Condition: reconditioned (used), Functionality: fully functional, 430 mm chain width Kjlhcot Aad Sscqnedk 120 mm Cutting height 55 KW saw motor infinitely variable feed speed Machine workshop checked Machine cleaned and repainted

Year of construction: 2024, Condition: new, - 6.000mm cutting length - min. cutting length 600mm - 5 saw supports - 80 - 140 mm cutting height Kdslhccopfcgaoqnsk - 4 KW saw motor - 1,5 KW stepless feed 10-30m/min Optional - Disposal conveyor belts

Year of construction: 2024, Condition: new, - 4 separation steps - log length on request - log diameter on request - Discharge height on request - 5,5 KW SEW gear motor Kolhccspfaubjqnsdk - R127 SEW gearbox

Year of construction: 2024, Condition: new, - Chopping height 240 mm - chopping width 540 mm - chopping length approx. 25-35 mm - Number of chopping knives 2 - rotor diameter 600 mm - rotor speed 590 rpm - feed motors 4 + 3 KW Kdslhccqonyidbjnok - main motor 45 KW / 55KW / 75 KW - 6.000 mm infeed conveyor belt - 2.000 mm conveyor belt underneath the machine

Year of construction: 2024, Condition: new, Log cross conveyor - Number of chain strands according to customer specifications - length and width according to customer specifications - powerful SEW gear motors - solid pin conveyor chain with gentle rollers Kolhshmp Ibjccqnjdk

Condition: used, - 2250 mm Cutting width - 80 mm cutting height Kdolhshkm A Neccqnek - 2x 3,7 KW saw motors

Year of construction: 2025, Condition: new, Functionality: fully functional, - 340 mm Cutting height - 70-250 mm max. cutting width - 500 mm passage width - 6000 mm step length - 3-20 m/min feed speed - 2 x 30 KW saw motors - 1,1 KW feed motor Kolhshkh N Teccqnsdk - 0,25 KW width adjustment motor - 1300 Kg weight

Year of construction: 2025, Condition: new, Functionality: fully functional, - 350 mm max. cutting height - 75-250 mm min/max Cutting width - 100 - 350 mm min/max logs - 18-80 mm side board - 1,8 - 6m Cutting length - 550 mm saw blade diameter - 4/6 saw cuts simultaneously - 5-30 m/min variable feed speed - 2x30 KW and 2x22 KW saw motors Kdslhccqjhkh Npjnek - 3 KW SEW feed gear motor - automatic 6-fold width adjustment - infeed table with 3 fold turning device - 2 centering roller pairs pneumatic pressure - driven infeed roller with 0,75 KW and pneumatic pressure - 2 driven outfeed roller pairs with 0,55 KW each - 4 pneumatic pressure roller pairs in the outfeed

Year of construction: 2024, Condition: new, The plant is available immediately ! Keljgvu Alohccqnedk - suitable for log diameters from 10 cm up to 50 cm - suitable for 2 - 6 m log length - 4-strand infeed conveyor 6 m long - 4 - strand separator 2 m long - 4 - strand separator 2 m long - Conveyor with pin conveyor chain M 112 with gentle rollers - block conveyor with 2 inch chain and flights - Special carrier for low-noise transport - Measurement with 1 mm resolution - Measuring frame with additional heating and sunshield - Display of all operating states on a 17" monitor - Fully automatic sequence control - Various storage options and sorting criteria - 5 ejectors right/left via SEW gear motors with brake - Spacious heat-insulated control cabin - 4 monitoring cameras with flat screen - Control cabinet with all cables - Sorting criteria according to agreement

Year of construction: 2024, Condition: new, 2.5 - 6 m Cutting length Kdelogp Su Eehccqnek - 120 - 450 mm max. cutting height - 80 -250 mm cutting width - infeed table with centering rollers - infeed table with log turning device - saw with 6 - fold width adjustment - draw-out bridge with 2 driven draw-out rollers - Pull-out bridge with 5 pairs of pressure rollers - 650 mm saw blade diameter - 2 x 37 KW saw motors below - 2 x 30 KW saw motors above - 6 saw cuts - 4 KW SEW feed gear motor - 5- 30 m/min stepless feed speed

Year of construction: 2024, Condition: new, - debarker with 3/3 feed rollers - infeed and centering table Kdolsfvbphshccqnek - min log diameter 100 mm - max log diameter 600 mm - min log length 2.000 mm - 30 m/min feed speed - 5 pcs. changeable carbide knives - 37 KW Main Motor - 9,2 KW Gearbox inffed and centering table - 5,5 + 7,5 KW Gearbox feed rollers - 9.000 Kg weight

Year of construction: 2024, Condition: new, - 150 mm infeed high - 430 mm infeed width - 30 mm chips - 2 knives - 440mm diameter Rotor - 590 U/min Rotor Kdslhoful Uieccqnek - 30 m/min Feed speed - 37 KW Mainmotor - 3 KW + 2,2 KW infeed roller Gearboxes - 6.000 mm conveyor belt - 2.000 mm discharge conveyor belt