Used glass drilling machines for sale (23)

Condition: used, • Type: W125 • Year of manufacture: 1989 • 2 brushes / water tank, pumps • Running direction: Right to left • Open top • Washing brushes 130 cm high • Heating • Price on request Hsdpeyucwysfx Ahveni

Condition: used, • Model: VTS 02F • Year of manufacture: 2012 • Very good condition, rarely used • Weight: 310 kg • Serial number: 365 Hnsdpfoyucfqsx Ahvoi • Borehole diameter: 4 and 100 mm • Electronic speed control for the drills • Ergonomic one-hand operation • Power requirement only 1.8 kW • Compact, vertical design – space-saving • Precise and simple coordinate control (accurate determination of hole center) • Many drills included. • Price on request

Condition: like new (used), Year of construction: 2011, functionality: fully functional, operating hours: 987 h, Vertical Schraml Drilling Machine Top Drill 130 NC - Usable height: 1300 mm (open top) - Infeed and outfeed: 2900 mm - Glass thickness: 3-30 mm - Overall length: 6000 mm Hnsdpfxjyuiwas Ahvei - Width: 2000 mm - Height: 2200 mm - Condition: As new - Year of manufacture: 2011

Condition: like new (used), Year of construction: 2022, functionality: fully functional, horizontal glass drilling machine Hodpeyub Azjfx Ahvsni with extendable roller table 700 mm machine sizes : L : 1850 mm , H : 1800 mm , depth : 1200 mm

Condition: good (used), • Model – FMF 100 • Double-sided drilling machine • Min. diameter: 3 mm Hnedpfxeuqma Aj Ahvoi • Max. diameter: 300 mm • Speed: 110 – 4600 rpm • Lower drill with automatic feed, upper drill guided manually

Condition: used, Year of construction: 2011, machine/vehicle number: GL11002, functionality: fully functional, power: 100 kW (135.96 HP), input voltage: 400 V, input current: 180 A, type of input current: three-phase, BUSETTI F10 double sided edging line for flat glass, still in production. Hnsdpfx Aheyntxbsvji

Condition: excellent (used), Year of construction: 2009, Vertical glass drilling machine SCHRAML topDRILL 130 NC Year of production: 2009 Maximum working height: 1300 mm NC controlled Very good and clean condition Surplus drilling/countersink bits included As is Available immediately Hsdjyfrvyspfx Ahvjni

Condition: refurbished (used), Year of construction: 2008, functionality: limited functionality, operating hours: 20,000 h, power: 60 kW (81.58 HP), input voltage: 400 V, input frequency: 50 Hz, type of input current: three-phase, total width: 11,000 mm, total length: 12,000 mm, air pressure: 8 bar, pressure: 8 bar, Glass grinding/polishing line consisting of a loading manipulator, four-sided processing unit, and Triulzi washing machine. The equipment is dismantled and stored in a warehouse. The seller undertakes to assist with commissioning the equipment at the buyer's premises. The condition of the Busetti manipulator is as-is (very good condition). The Busetti P4 processing line has undergone a complete overhaul. The Triulzi washer has been partially refurbished. Hsdsxxaitspfx Ahvoni

Condition: used, Year of construction: 2010, machine/vehicle number: GG710C-18759, functionality: fully functional, input voltage: 400 V, input current: 8 A, type of input current: three-phase, total width: 2,000 mm, total length: 2,500 mm, total height: 2,000 mm, overall weight: 850 kg, drill diameter: 140 mm, pressure: 6 bar, spindle speed (min.): 3,800 rpm, One semiautomatic glass drilling machine, with two opposite heads available in 03-2026 (still in production). Max sheet size: 2600x1350mm. Min sheet size: 80x80mm. Max tool diameter: 140mm. Glass thickness from 1.8 to 55mm. Spindle speed: 3800rpm. Hodpfx Ajyc Egyehvjni

Condition: new, Year of construction: 2026, functionality: fully functional, input voltage: 400 V, input current: 16 A, total width: 1,487 mm, total length: 4,440 mm, total height: 2,793 mm, overall weight: 1,900 kg, Equipment: documentation/manual, EXPOGLASS® PRIAM is a modern vertical glass drilling machine equipped with electronic feed, automatic drill length measurement, and glass thickness measurement. The machine ensures high precision, smooth operation, and clean edges even with large hole diameters. Polish product – a solid, easy-to-use construction designed for intensive daily work in glass workshops. Hjdpfxoh Ek H Ss Ahveni Technical data Length - 4440 mm Height - 2793 mm Width - 1487 mm Weight - 1900 kg Maximum distance of drilling center to bottom of the glass - 1000 mm Glass thickness - 2 to 20 mm Communication - touchscreen 7” and analogue buttons Spindle feed (motion) - automatic Spindle feed steering - electronic (not pneumatic) Setting of loading bar height - electronic Spindle rotation speed - 700 RPM do 2800 RPM Measurement of the drill position - automatic Drills changing mode - lowering of the white top and blocking spindle rotation Setting of the drilling depth - electronic (calculated by a controller) Horizontal positioning - two row of bumpers with measure (manual) Glass clamping system - pneumatical Hole chamfering mode - installed, electronically driven Automatic glass thickness - installed, electronically Measuring Automatic drill bit diameter - installed, electronically Measuring Drilling in series - installed

Year of construction: 1994, condition: used, Dimensions: H = 1600 mm L = 1200 mm Hnedpslp Iibjfx Ahvei D = 1100 mm

Condition: new, Year of construction: 2026, functionality: fully functional, input voltage: 400 V, input current: 16 A, total width: 1,487 mm, total length: 4,440 mm, total height: 2,793 mm, overall weight: 1,900 kg, ELECTRONIC VERTICAL DRILLING MACHINE FOR GLASS MODEL: PRIAM BRAND NEW Priam model is a two-spindle (double-sided) vertical glass drilling machine. It is designed for customers looking for a functional and easy-to-use machine that is also durable. When designing it, we went back to the old school of machine construction – on heavy, heat-treated steel bodies with mechanical solutions for subsequent easier operation and servicing. With this different approach to design and manufacturing, our machine ensures many years of trouble-free glass drilling, providing a multiple return on investment. To make sure that the components of our drill are made with due care, we manufacture them in Poland using local contractors. The main body is made on site, by our company, and then heat treated and processed further in local areas. This ensures that all production is carried out under our careful supervision, and any imperfections can be detected and corrected before the product reaches the customer. This ultimately also supports the local machinery industry. The product’s components are at the highest European level. Our suppliers include SIEMENS, HITACHI, UNITRONICS,SCHNEIDER,GARLOCK Mechanical components are accessible, while in-service replacement is simple and quick. The Expoglass Priam drill - functionality at the highest level: ⦁ 2 spindles (front and back) – allowing to drill the pane in a single pass – without turning it ⦁ Electronically controlled loading bar – in order to set the size of the bottom edge of the glass from the hole, you just need to enter the required size on the touch screen and the machine will automatically adjust to the right position ⦁ Quick drilling bit change mode – after pressing the drill bit change button, both spindles are automatically locked (they cannot be turned), the vertical table, located between both drilling bit, slides down – thus opening a large space between them. This means that the drill bits can be unscrewed without the use of a wrench, and there is plenty of space to perform this operation comfortably. ⦁ Automatic (electronic) measurement of the drill bits length and position – after the drill bits have been changed, the machine automatically calibrates them, measuring their length so that it knows the distance between the glass and the drilling end of each bit – very important in small plants where there are no series, but most of the holes are made individually Hjdpfx Aod S Uhqjhvsni ⦁ Automatic (electronic) calculation of spindle cavity depth – after automatic calibration of spindles, the machine measures the thickness of drilled glass by itself, by pressing the glass, and then selects the perfect values of cavities on its own. The operator's only task is to click the "drill" button, the process is completely automatic ⦁ Electronically controlled feed of the spindles – significantly increases machine capabilities, in addition to enabling the operation of most of the foregoing functionalities, it also makes the feed values perfectly adaptable to any situation and changeable with just a few clicks on the screen. This is illustrated, for example, by the fact that e.g. after drilling a 15 mm piece of glass, you take 10 seconds to change the settings, you can immediately drill a 2 mm glass pane without fear of cracking or chipping. And all this without the experience and "intuition" of the operator

Condition: used, Year of construction: 2001, machine/vehicle number: 526/01, functionality: fully functional, operating hours: 60,000 h, input voltage: 380 V, type of input current: three-phase, feed length X-axis: 1,250 mm, Used glass drilling machine with automatic ruler. In good condition. Hsdsx Rp Rgopfx Ahveni

Condition: excellent (used), Knopp Duplex glass drilling machine double-sided. Hnjdeq Umcnepfx Ahvoi Year of manufacture 2000 In good condition. With ball roller table, cross laser and infinitely variable speed control. Incl water cooling

Condition: good (used), Year of construction: 2000, The upper drill head is missing. Working height: 1030 mm, Hnjdpfx Ahot Aifxovji Height: 1680 mm, Depth: 1800 mm, Width: 2450 mm

Condition: refurbished (used), Year of construction: 2007, machine/vehicle number: 5976/07, functionality: fully functional, power: 2.5 kW (3.40 HP), input voltage: 380 V, input frequency: 50 Hz, total width: 1,850 mm, total length: 2,500 mm, total height: 1,750 mm, overall weight: 420 kg, drill diameter: 130 mm, pressure: 6 bar, working height: 1,000 mm, Equipment: documentation/manual, RBB Trapano double-sided drilling machine, technically refurbished at our Belgium warehouse. Includes a set of used tools, see picture. Hnsdjxg Ngqepfx Ahvei

Condition: like new (used), Year of construction: 2003, functionality: fully functional, power: 2.5 kW (3.40 HP), input voltage: 400 V, input frequency: 50 Hz, type of input current: AC, total width: 24,000 mm, total length: 52,000 mm, total height: 10,500 mm, overall weight: 2,000 kg, air pressure: 6 bar, compressed air connection: 6 bar, drill diameter: 180 mm, working height: 1,050 mm, 8 Sep | Drilling machines METRAL double head drilling machine TD3-2000, year 2003, complete overhauled 2023 Hnjdpsrg E Hcjfx Ahvsi Technical data: glass thickness 2-50 mm bore diameter 3-180 mm weight without roller table: 775 kg power supply: 2,5 kW measurements without roller table: 1,3 x 1,7 x 1,2 m measurement roller table: 5,2 x 2,4 m/ height 1050 mm/+-25 mm maximum measurement machine frame to drilling center:

Condition: as good as new (ex-display), Year of construction: 2025, functionality: fully functional, power: 4.4 kW (5.98 HP), Schiatti Angelo FPD60 Bohrmaschine doppelseitig Max. width: 1.100 / 1.300 / 1.600 mm Hedpfx Ahewd Ertsvjni Glasthickness: 2-28 mm Max. Drilling Diameter 3-100 (automatic) 3-200 mm (manuell) RPM: 200 - 4500 U/Min frequenzy controlled Electric consumption: 4,4 KW

Year of construction: 2023, condition: as good as new (ex-display), CMS Ypsos Vertical cnc working center for Glas Bearbeitungsmaße: Max. Glas-Length: 3.200 / 4.500 / 6.000 mm Max. Glas-height: 2.200 / 2.800 / 3.300 mm Min. Glas-length: 420 mm Hjdpfxopygrae Ahvsni Min. Glas-height: 270 mm Thickness: 3-30 mm Options: - 2x groups of suction cups which 3 suction cups on each group - Elektrospindle 3,7 kW 0-12.000 U/Min - Materialmeasurement and Toolmeasurement system - Rotating tool magazin - Additional drilling from the backside - CAD/CAM - central lubrification

Condition: like new (used), Year of construction: 2004, Double-side glass drilling machine BUSETTI GIO 1250 Semi-automatic Year of production: 2004 With roller table Hedpfxsiy Dxkj Ahvsni With manual positioning Water tank with pump included Very good and clean condition Availability immediate

Condition: good (used), Year of construction: 1994, Transport dimension: Width: 1500 mm, Depth: 1500 mm, Hjdpfx Ahsm Rg Npovjni Max. Height: 1550 mm, Weight: approx. 220 kg.

Condition: used, Year of construction: 2013, 3-axis system Max. glass dimensions: 1600 x 2600 mm Min. glass size: 100 x 350 mm Glass thickness: 3 - 19 mm Hole/double-sided Hnjdpswmqrqjfx Ahvsi 16 compartments for 16 positions Length: 5850 mm Width: 5500 mm Max. Installation height of the system: 2200 mm

Condition: excellent (used), Year of construction: 2007, functionality: fully functional, total width: 1,200 mm, total length: 6,400 mm, overall weight: 850 kg, Schraml Clear 13 Special 4 Hedpfx Aheu Nw Szsvjni Working height 580 mm Year: 2007 Condition : Good used Open Top Washing height 1300 mm Brushes 4 Also available in lines with drilling machine.