Vertical glass drilling machine

EXPOGLASS® Priam

Condition: new, Year of construction: 2026, functionality: fully functional, total length: 4,440 mm, total width: 1,487 mm, total height: 2,793 mm, input voltage: 400 V, overall weight: 1,900 kg, input current: 16 A, ELECTRONIC VERTICAL DRILLING MACHINE FOR GLASS MODEL: PRIAM BRAND NEW Priam model is a two-spindle (double-sided) vertical glass drilling machine. It is designed for customers looking for a functional and easy-to-use machine that is also durable. When designing it, we went back to the old school of machine construction – on heavy, heat-treated steel bodies with mechanical solutions for subsequent easier operation and servicing. With this different approach to design and manufacturing, our machine ensures many years of trouble-free glass drilling, providing a multiple return on investment. To make sure that the components of our drill are made with due care, we manufacture them in Poland using local contractors. The main body is made on site, by our company, and then heat treated and processed further in local areas. This ensures that all production is carried out under our careful supervision, and any imperfections can be detected and corrected before the product reaches the customer. This ultimately also supports the local machinery industry. The product’s components are at the highest European level. Our suppliers include SIEMENS, HITACHI, UNITRONICS,SCHNEIDER,GARLOCK Mechanical components are accessible, while in-service replacement is simple and quick. The Expoglass Priam drill - functionality at the highest level: ⦁ 2 spindles (front and back) – allowing to drill the pane in a single pass – without turning it ⦁ Electronically controlled loading bar – in order to set the size of the bottom edge of the glass from the hole, you just need to enter the required size on the touch screen and the machine will automatically adjust to the right position ⦁ Quick drilling bit change mode – after pressing the drill bit change button, both spindles are automatically locked (they cannot be turned), the vertical table, located between both drilling bit, slides down – thus opening a large space between them. This means that the drill bits can be unscrewed without the use of a wrench, and there is plenty of space to perform this operation comfortably. Klodpfod S Uhqjx Ah Nsl ⦁ Automatic (electronic) measurement of the drill bits length and position – after the drill bits have been changed, the machine automatically calibrates them, measuring their length so that it knows the distance between the glass and the drilling end of each bit – very important in small plants where there are no series, but most of the holes are made individually ⦁ Automatic (electronic) calculation of spindle cavity depth – after automatic calibration of spindles, the machine measures the thickness of drilled glass by itself, by pressing the glass, and then selects the perfect values of cavities on its own. The operator's only task is to click the "drill" button, the process is completely automatic ⦁ Electronically controlled feed of the spindles – significantly increases machine capabilities, in addition to enabling the operation of most of the foregoing functionalities, it also makes the feed values perfectly adaptable to any situation and changeable with just a few clicks on the screen. This is illustrated, for example, by the fact that e.g. after drilling a 15 mm piece of glass, you take 10 seconds to change the settings, you can immediately drill a 2 mm glass pane without fear of cracking or chipping. And all this without the experience and "intuition" of the operator

Condition: excellent (used), Year of construction: 2007, functionality: fully functional, machine/vehicle number: 302827, Federhenn rod-profile machining center (drilling and milling) SBZ 100G - TO BE SOLD IN LINE WITH 1 SCHIRMER NC-SAW 1000-G4 YEAR 2014 (COMPLETE LINE) SEE SCHIRMER ADVERTISMENT....!! NC feeder device with gripper max 200 m/min - max profiles 3500 mm.. The gripper can be adjusted pneumatically in 2 axes for adaptation to different profile geometries. Machining station designed as a G-module with 2 servo axes in Y and Z direction. Prepared for accommodating up to 14 processing units for complete processing of PVC, frame, post and frame profiles - outfeeder with table 2500x1500 mm.. PC-control C 6140, display, software SBZ 100G, PLC+NC. Modem remote diagnosis. Loading magazine with 9 places (9 profiles 3500 mm) designed for frame profiles max 127 mm width. Barcode scanner - Horizontal belt conveyor with 9 transport beams that can be adjusted continuously. 18 m/min - 3000 x 2400 mm - units: screw unit, 2 x drilling unit for dowel or post holes, 2 x drilling unit for fixing holes 16,750 rpm, 2 x additional processing (marking the closing part), drilling unit for front door fittings (opens inwards), drilling unit for olive hole drilling (3 sp), milling unit lock case. 2 pcs milling unit for milling and drilling drain slots and ventilation holes. 1 ditto obliquely arranged. 1 swivel device (MD and AD window systems. Milling unit for milling PZ and handle hole pattern Klodpewnpa Nefx Ah Nel

Year of construction: 2025, condition: new, functionality: fully functional, ELECTRONIC VERTICAL DRILLING MACHINE FOR GLASS MODEL: PRIAM MANUFACTURED IN 2025/ BRAND NEW Priam model is a two-spindle (double-sided) vertical glass drilling machine. It is designed for customers looking for a functional and easy-to-use machine that is also durable. When designing it, we went back to the old school of machine construction – on heavy, heat-treated steel bodies with mechanical solutions for subsequent easier operation and servicing. With this different approach to design and manufacturing, our machine ensures many years of trouble-free glass drilling, providing a multiple return on investment. Kodpfx Aegq Dl Aeh Nell To make sure that the components of our drill are made with due care, we manufacture them in Poland using local contractors. The main body is made on site, by our company, and then heat treated and processed further in local areas. This ensures that all production is carried out under our careful supervision, and any imperfections can be detected and corrected before the product reaches the customer. This ultimately also supports the local machinery industry. The product’s components are at the highest European level. Our suppliers include SIEMENS, HITACHI, UNITRONICS,SCHNEIDER,GARLOCK Mechanical components are accessible, while in-service replacement is simple and quick. The Expoglass Priam drill - functionality at the highest level: ⦁ 2 spindles (front and back) – allowing to drill the pane in a single pass – without turning it ⦁ Electronically controlled loading bar – in order to set the size of the bottom edge of the glass from the hole, you just need to enter the required size on the touch screen and the machine will automatically adjust to the right position ⦁ Quick drilling bit change mode – after pressing the drill bit change button, both spindles are automatically locked (they cannot be turned), the vertical table, located between both drilling bit, slides down – thus opening a large space between them. This means that the drill bits can be unscrewed without the use of a wrench, and there is plenty of space to perform this operation comfortably. ⦁ Automatic (electronic) measurement of the drill bits length and position – after the drill bits have been changed, the machine automatically calibrates them, measuring their length so that it knows the distance between the glass and the drilling end of each bit – very important in small plants where there are no series, but most of the holes are made individually ⦁ Automatic (electronic) calculation of spindle cavity depth – after automatic calibration of spindles, the machine measures the thickness of drilled glass by itself, by pressing the glass, and then selects the perfect values of cavities on its own. The operator's only task is to click the "drill" button, the process is completely automatic ⦁ Electronically controlled feed of the spindles – significantly increases machine capabilities, in addition to enabling the operation of most of the foregoing functionalities, it also makes the feed values perfectly adaptable to any situation and changeable with just a few clicks on the screen. This is illustrated, for example, by the fact that e.g. after drilling a 15 mm piece of glass, you take 10 seconds to change the settings, you can immediately drill a 2 mm glass pane without fear of cracking or chipping. And all this without the experience and "intuition" of the operator

Condition: good (used), Completely overhauled by us Glass grinding machine with 9 spindles for grinding and polishing • Year of manufacture: 2014 • Very good condition • Glass thickness: 3 – 25 mm • Minimum glass size: 80 x 80 mm • Machine length: 6470 mm • Machine height: 2610 mm • Machine depth: 1110 mm • Weight: approx. 2800 kg • Price on request Klsdeu Sm H Hjpfx Ah Nsl

Condition: new, Year of construction: 2025, Schiatti Angelo BFP12 Double Edger Max. working width: 1.300 - 4.500 mm Processing station with different processing options: 5 / 6 / 8 / 9 / 10 / 11 Spindle - Glasthickness 3-35 mm - min. working width 160 mm - Max. weight: 480 KG - Automatic thickness adjustment via SPS - Tanks for waste water collection Ksdpfewd Hbijx Ah Njll - Inkl. turning station

Condition: as good as new (ex-display), Year of construction: 2023, functionality: fully functional, total width: 5,886 mm, total length: 12,432 mm, pressure: 10 bar, cutting length (max.): 3,800 mm, 548LAM-38: 3800mm automatic bridge, 20mm breakout capability, short heating element, automatic blade. Opty-Win-Cad/M optimization, labels, shape catalog, CAD (onboard machine PC). Manual tilting arms, cutting option for 10+10 and 12+12mm, zero kit for minimum size (350x300mm) in automatic mode. Fully automatic compact 38 pack: Belts on TTS module, transport with rotating vacuum cups and automatic diagonal cutting. Cullet bin & 1 additional table with pivoting wheels included (1500x800mm). 363BCS-J: Tilting motion assembly, PPL label printer with glass cleaning kit before labeling, breakout bars, Sonar kit for special glass reading, Opty-Win-Cad/M optimization, labels, shape catalog, CAD (onboard machine PC). Kledpfxexwmxxe Ah Nel

Year of construction: 2012, condition: good (used), machine/vehicle number: ENOG, DEMAG KBK crane headliner crane runway dimensions approx. 8x4m Kjdpfxomqf Nfo Ah Njll Payload / lifting load 250 KG - 0.25to Technical data of the system: Crane runway made from Demag KBK1+2 rails The system is delivered complete: KBK rails, rail connectors, trolleys, end plates, cable carriers, holders/hangers, etc. incl. Demag DC-COM 250KG chain hoist Crane is dismantled and available immediately Used condition, see pictures Item location is 75053 Gondelsheim Dispatch by forwarding agent or pick-up only by appointment Demag KBK1 KBK2 and KBK3 rails are stock items! Other KBK systems are also available. Payload 125KG - 1600KG Please inquire about your crane runway with cantilever load and dimensions.

Condition: good (used), Year of construction: 2010, functionality: fully functional, Bavelloni laminated glass cuting table LAMY 370 S + float table REV 372 SR max. cutting lenght : 3700 mm min thikness : 3 + 3 mm + PVB max. thikness : 8 + 8 mm + PVB Kjdpfxexfamlo Ah Nsll machine dimensions : 5740 x 3600 mm

Condition: excellent (used), Year of construction: 2016, operating hours: 158 h, functionality: fully functional, machine/vehicle number: GG6TKB-21932, total width: 4,201 mm, total length: 7,151 mm, overall weight: 2,250 kg, type of input current: three-phase, input voltage: 400 V, input frequency: 50 Hz, feed length X-axis: 6,100 mm, feed length Y-axis: 3,355 mm, pressure: 8 bar, cutting length (max.): 6,100 mm, Loading, cutting and break out machine for monolithic glass sheets with less than 158 working hours! Glass thickness automatic detection device enables automatic adjustment of machine parameters. Jumbo sheets: max. 6100x3355 mm, thickness 2–19 mm. Kledpfxswnww No Ah Nol

Condition: good (used), Year of construction: 2007, functionality: fully functional, input voltage: 400 V, type of input current: AC, Lisec gas filling press for maximum unit sizes of 3500 x 2500 mm, year 2007, consisting of: RSVN-35/25, frame set section, year 2007 RTVB-15/25ST, extension conveyor for measuring section, year 2007 Kodpfswca Hpjx Ah Njll RTVB-15/25MZU2, measuring section for gas filling press, year 2007 FPS-35/25U2, gas filling press for Argon, year 2007 RTVB-15/25ST, press outlet conveyor, year 2007 UKL-35/25, tilt table, year 2007