Condition: used, • Load capacity 350 kg • 6 vacuum suction cups, 250 mm diameter, adjustable • Vacuum lifter can rotate 90° and tilt 90° • Suction cups with guide tube and electric trolley • 4 units available, brand new and unused • Immediately available IV: + Design Standards 1. The construction of the unit strictly complies with European CE standard EN13155:2016, American ASME (Mechanical Engineering Association) B30-20-2006, and German UVVI8 regulations. The key design parameters exceed the requirements of the aforementioned standards. 2. Safety factor: The main structure features a factor of 4.0, vacuum safety level is 65%, and the standard safety level is 85%, which is 20% above the standard safety requirement. V+ Equipment Inspection and Standards 1. General Hedpfx Ajxnvq Eeh Nong Check that all materials are complete, inspect if the equipment exterior is painted or scratched, check for damage to the suction cups and pipes. 2. Pre-shipment Inspection © Equipment suction test © Equipment pressure holding test © Alarm system test © Various control components • Price on request

Condition: used, • Manufacturer: MHG Strahlanlagen GmbH • Max. glass thickness: 70 mm • Max. glass size: height 1500 mm, length 3,000 mm • Open top • Dimensions: L 6200 x W 2500 x H 3000 mm • Total height: 2300 mm • Number of nozzles: 2 + 1 manual hand gun • Complete documentation available • Blasting speed steplessly adjustable: 100 – 500 mm/s • Blasting nozzle diameter: 6.5 mm • Air consumption at 6 bar (L/min): 1200 litres with 2 nozzles • Connection values: 230/400 V/50 Hz/3x16 A Hnjdpfexu Au Dsx Ah Njg

Condition: good (used), - Type: GS - 250 - serial no.: 14 - Year of construction: 1999 - Dimension min.: L1100mm x W800mm x H900mm Hsdpfx Ajrgqp Noh Neng - max.: L1700mm x W1300mm x H900mm - Power type: 1 x 220V / 50HZ / 7.8 A - Connected load: 1500w / 2800 MIN - 1 kW - Price on request

Condition: good (used), - All rubber rollers new or as good as new - Belt length 3000 mm - Year of manufacture - Price On request Hnedpfjulvipjx Ah Nog

Condition: good (used), With extended roller table • Type – SILIKANT – 2500 • Serial number – 7609 1-12 • Year of manufacture – 2001 • Belt size – 100 x 2500 • Roller table (total length) 4.10 m × 0.55 m Hnsdpfx Aouqlc Neh Neg • Center section – 1.20 m • Sides 2 x 1.45 m • Height – 1.02 m • Price upon request

Condition: good (used), • Type: 131BMK • Serial number: GG50KB-6431 • Glass thickness 2-18 mm • With cutting optimization • Can only make straight cuts • Max. glass size 2550 x 3300 mm • With air cushion + breaking bars Hnsdpfx Ahsq Apa He Neg • Tiltable • Completely overhauled – also with new felt • Year of manufacture - 2000 • Weight: 1800 kg • Includes new computer • Electrical specifications: 11.4kW, 50Hz, 380V • Price on request

Condition: used, • FTG small glass rack storage • 6 pull-out trays, each with 280 mm support • L = 3350 mm Hnodpfx Ahsxx S Axo Neg • W = 2350 mm • H = 2050 mm • Price on request

Condition: used, • With digital display for length adjustment via handwheel. • Long support table on the left and right • Storage shelf behind • Extractor • Spare saw blades Hedpfowcm Nqsx Ah Neng • Price upon request

Condition: used, • Molecular Filling Machine • Type – A4 AL • Machine No. – 1203150480494 • Year of Manufacture – 1994 • Weight – 71 kg Hnodewc Rqropfx Ah Njg • Price upon request

Condition: used, • Gluing table with two lamps Hodpfx Aext Iqneh Nong • Dimensions: L 1.89 m x W 1.0 m x H 0.90 m • Price on request

Condition: used, • Approx. 500 units available • Model – GTG-L Hsdpfxoxwvq Do Ah Nong • Load capacity: 2000 kg • Loading height: 1325 mm • Loading length: 1700 mm • Weight: 100 kg • Price on request

Condition: good (used), Data: Hjdpfx Ahoi D Ed Ne Nsng - Manufacturer: Besana - Type: Besana 70/2TC - From current production - Max. Projection to the rear: 1200 mm - Max. Drilling diameter: 300 mm - Table dimension: 1200 x 1200 mm - Machine dimension: D 2400 x W 1200 x H1800 mm - With water pump and circulation cooling - Lower drill, drills automatically with compressed air, upper drill is guided manually - Weight: 1200 kg Price on request

Condition: used, • Length = 2200 mm • Width = 700 mm • Height = 1450 mm Hodpfx Ahex Ebxpj Njng • Glass support = 550 mm • Currently 129 pieces in stock • 96 pieces fit on one truck • Truck must have a minimum height of 2.6 m • Price on request

Condition: used, UV dryer Comes from ongoing production Hnjdpfx Ajv Sauajh Nsg

Condition: used, • Belt grinder for glass with a large roller table and stops for grinding round glass Hnsdpfx Ahowckphj Neg • No. 55741-11/2 • Dimensions: W 2800 x D 900 x H 1600 mm • Table height approx. 900 mm

Condition: used, • Length 2000 mm • Width 800 mm • Height 1000 mm • Approx. 100 pieces • Price on request Hnodpjw E Ezqofx Ah Njg

Condition: used, • Bohle glass clamp for crane, • Maximum size: 6000 x 3210 mm • Glass thickness: 4 - 15 mm Hnodpfx Ajxvytmoh Neg • Load capacity – max. 600 kg • Price on request

Condition: used, • L = 1700 mm • W = 800 mm • H = 1750 mm Hodpex Ebxcofx Ah Njng • Glass support = 640 mm • 118 units • Loading height for truck is 2900 mm here • Price on request

Condition: good (used), • Electronic 11-spindle edge grinder and polisher for flat edges and miters, right-to-left operation • Edge angle 0 to 45 degrees Hedpfx Aerhilxjh Neng • Type: TL 11 AV • Serial number 497-01 • Machine configuration o 2 x 150 mm diamond wheels for edges o (2) polishing wheels (150 mm) o (2) polishing wheels (150 mm) o (1) cerium-impregnated wheel o (1) 150 mm diamond wheel for rear hem o (1) 150 mm polishing wheel for rear hem o (1) 150 mm diamond wheel for front hem o (1) 150 mm polishing wheel for front hem Special price €6,500

Condition: good (used), - Recessed grip grinder - Year of construction 1981 Hjdpfor Nviusx Ah Nsng - Dimensions 1750 - 2300 x 1500 - 2700 x 800 mm (HxWxD) Price on request

Condition: good (used), - Ready for immediate use - Feed speed: 0.5 - 5 m/min - Glass thickness: 3 - 55 mm - Can mitre grind up to 45° - 13 grinding and polishing wheels Hodstqr Hpjpfx Ah Nong - Complete documentation available - Weight: 5700 kg - Has been regularly serviced and operated with a water treatment system, - very clean machine - Connected loads: 26 kW, 400 V, 50 Hz, 6 bar

Condition: good (used), Cutting table for divided tape measures Hnedpst Iflrsfx Ah Neg • Complete line available • Fully automatic float glass cutting table from Hegla, manufactured by Laser, was purchased by Hegla, and spare parts are available from Hegla. • The table can also cut shapes, particularly suitable for small dimensions. All data can be optimized and entered on the computer; the program is installed on the PC that is included. • Glass thicknesses from 2-15 mm • Maximum glass size 2250 x 3300 mm • Breaking table with breaker bars

Condition: good (used), Completely overhauled by us Glass grinding machine with 9 spindles for grinding and polishing Hnodpfx Ahou Sm H Ho Njg • Year of manufacture: 2014 • Very good condition • Glass thickness: 3 – 25 mm • Minimum glass size: 80 x 80 mm • Machine length: 6470 mm • Machine height: 2610 mm • Machine depth: 1110 mm • Weight: approx. 2800 kg • Price on request

Condition: good (used), • Facet grinding machine • Year of manufacture 1990 Hnsdpsvxthtofx Ah Nog • Comes from ongoing production • More information on request

Condition: used, • Horizontal glass washing machine in very good, well-maintained condition • 2 brushes, top and bottom, very good condition • Roller spacing 110 mm • Minimum glass dimensions 120 x 300 mm • Maximum washing width 1300 mm • External machine dimensions • Length 4500 mm, width 2000 mm, height 1250 mm Hnodpswl Dkqsfx Ah Nog • Inlet – 1000 mm, outlet – 1400 mm • Machine width – 2300 mm • Price upon request