Condition: good (used), Cartridge holder with shut-off valve Application: Butyl extruder Pedpfxjy Tk Tno Amkspt Weight: 2.6 kg

Condition: good (used), Year of construction: 2001, Lifting capacity: 220 kg Width: 560 mm Height: 1400 mm Ppsdpfoy Tiwlsx Amkst Depth: 450 mm Net weight: 45 kg Condition: good, second-hand

Condition: ready for operation (used), Year of construction: 2003, functionality: fully functional, input voltage: 400 V, type of input current: three-phase, EUROMEC semi-automatic float glass cutting table (year 2003). Ppjdpfjx I Rb Iex Amket The machine is in very good condition and is available for immediate delivery.

Year of construction: 2020, condition: new, 7 "Touch Panel The large color touch panel looks aesthetically and is comfortable and intuitive to use. You will set all important parameters on it. Memory of 20 programs with 10 events It is possible to save up to 20 programs and activate up to 10 consecutive time-temperature events arranged in the heating curve. This is especially needed for more demanding processes. Information on gas / oil consumption The consumption is calculated based on the burner settings. This feature will allow you to estimate the cost of a given cycle, plan consumption and check personnel. Dual-channel recorder of USB cycle parameters Each furnace is equipped with a recorder that records all firing parameters, including two temperature channels - like in an airplane black box, on a USB flash drive. The system also enables the analysis of monthly / daily statements, including media consumption and performance. Each start of heating, opening the door, can be recreated, a few years back. Such a dedicated option is not offered by any manufacturer. It is a system developed from scratch by our programmers Automatic smoke exhaust chimney The chimney can be programmed to open a few minutes before the end of the firing in order to smoke the chamber. It can be remotely controlled from the panel, it does not need to be done mechanically as in most structures. Minute forecast until the end The cycle has started, how long will it end? calculating the heating dynamics, we will count it and show on the display how much longer it will take. To open it, just pull the door. The lock has adjustable pressure of the door, to close it just push it, the lock will catch the door and automatically pull it back. Ppodpfx Amjfz U Tqekot In order to minimize the effect of heating the hall when opening the door, a hood is installed above the door to remove some of the heat to other places. The MTS system was created to provide a real reading of the temperature of the furnace chamber. Standard measurement is based on one temperature measurement which is often wrong.MTS is a system of many sensors located in the outermost places of the chamber. The multi-zone heating system ensures a firing quality that has been so far unique. Each normal oven has only one heating zone and only one temperature measurement! The multi zone heat system supports up to 8 independent heating zones in one oven. Each heating zone has as many as 3 temperature sensors! When there are temperature differences between zones, they are automatically equalized! The system helps to combat the problem when elements of different material thicknesses enter the furnace.

Condition: good (used), Year of construction: 1994, functionality: fully functional, input voltage: 400 V, type of input current: three-phase, Manual sealing machine Reinhardt Technik Maxi Hydraulik, year 1994, good working order, running on silicone The machine will be available from our stock in Austria by the end of May 2026. Max. material temperature 80° Max. system pressure 300 bar Air supply pressure 6 bar Ppodpfx Ajy S Tlkomkjt

Condition: good (used), Year of construction: 2011, Lifting capacity: 1000 kg Unit with safety grille Width: 5300 mm Height: 2900 mm Depth: 500 mm Psdpfx Amey S S Nhokopt Net weight: 308 kg Condition: good, second-hand

Condition: good (used), Year of construction: 2007, functionality: fully functional, working height: 500 mm, input voltage: 400 V, type of input current: three-phase, Lisec glass washing machine RTL-25VN, year 2007, working direction left/right, with 6 brushes for low-e, including 1 hot water tank, 1 sand filter and 1 blower. Pedpfxsy Sv Tke Amkspt The machine comes with an inlet conveyor RTVN-32/25WE (3,2 m length) and an outlet conveyor RTVN-16/25ST (1,6 m length). The brushes are still good for at least 1-2 years depending on production. The machine was used in small production only. Since it has some rusty spots we can offer it for a reasonable price. The machine is in working order and will be available from our stock in Oroshaza/ Hungary.

Condition: good (used), Year of construction: 1995, functionality: fully functional, input voltage: 380 V, overall weight: 1,900 kg, type of input current: three-phase, power: 10 kW (13.60 HP), Equipment: documentation/manual, Lisec bending machine BSV-45A (high speed bender with 20 seconds cycle time), 1995, including option for arc shape bending and air pressure increase fo steel bars, consisting of: BSV-45A, bending machine APM-45, endless connecting device PM-45/4, 4-slot spacer bar magazin Ppsdpfsrtpizjx Amkst high speed bender 20 seconds cycle time including option for arc shape bending including option for air pressure increase to run steel bars including preparation for printer signal with frequency converter for 2 different speeds of profile saw The machine can handle aluminium spacer bars as well as steel profiles The machine is in full working order and comes with one bending tool for 16 mm aluminium/steel spacer bars.

Condition: like new (used), Year of construction: 2003, functionality: fully functional, power: 2.5 kW (3.40 HP), input voltage: 400 V, input frequency: 50 Hz, type of input current: AC, total width: 24,000 mm, total length: 52,000 mm, total height: 10,500 mm, overall weight: 2,000 kg, air pressure: 6 bar, compressed air connection: 6 bar, drill diameter: 180 mm, working height: 1,050 mm, 8 Sep | Drilling machines METRAL double head drilling machine TD3-2000, year 2003, complete overhauled 2023 Pedjrg E Hcopfx Amkept Technical data: glass thickness 2-50 mm bore diameter 3-180 mm weight without roller table: 775 kg power supply: 2,5 kW measurements without roller table: 1,3 x 1,7 x 1,2 m measurement roller table: 5,2 x 2,4 m/ height 1050 mm/+-25 mm maximum measurement machine frame to drilling center:

Condition: used, Year of construction: 2007, functionality: fully functional, total length: 3,700 mm, total width: 2,300 mm, total height: 800 mm, working height: 520 mm, input voltage: 400 V, type of input current: three-phase, Lisec tilt table UKL-35/23VM, working direction left/right, year 2007 Ppedpfx Ajyxxagomkjt

Condition: excellent (used), Year of construction: 2001, functionality: fully functional, Lisec gas filling press for maximum unit sizes of 3500 x 2500 mm, year 2001, consisting of: Podoy Swfzopfx Amkspt - RTVN-15/25ST, extension conveyor for measuring section, belt type, year 2001 - RTVN-15/25MZ, measuring section for gas filling press, belt type, with height and length measuring as well as measuring of glass and spacer width, year 2001 - FPS-36/25U2T, gas filling press for Argon, spindle type, with shape filling option, the machine is already equipped with Sigmatek DIAS control system and LENZE servo motors and controllers, the machine also can do 4-sided step units (bottom 50 mm, front, top and rear 130 mm) year 2001 - RTVB-15/25ST, press outlet conveyor, roller type, year 2001 The machine can be seen at our warehouse in Hofkirchen/Austria on appointment.

Condition: like new (used), Year of construction: 2005, functionality: fully functional, input voltage: 400 V, overall weight: 750 kg, type of input current: three-phase, Manual Lisec 2-k sealing machine TAL-50PS/B for Polysulfide. The machine is completely overhauled and therefore in excellent condition. As new. power: 3N/PE 400V 50Hz Load: 5,4kW Pedsy Sv R Njpfx Amkspt The machine can be seen in our overhaul warehouse in Oroshaza/Hungary on appointment.

Condition: excellent (used), Year of construction: 2001, functionality: fully functional, total length: 37,000 mm, total width: 4,000 mm, total height: 3,750 mm, working height: 500 mm, input voltage: 400 V, type of input current: three-phase, Lisec IG line 4000 x 2500 mm (1990/2001), left/right: - RTV-27/25, extension inlet conveyor washing machine, year 1990 - RTV-38/25WE, inlet conveyor washing machine with glass thickness measurement and automatic low-e detection, year 1990 Ppjdpfxjy Sv Two Amkst - VHW-25V8, washing machine with 8 brushes for low-e, including 2 sand filters, 2 hot water tanks and blower, year 1990 - RTVN-32/25ST, outlet conveyor of washing machine, year 2001 - RSVN-38/25A, frame set section, year 2001 - RTVN-15/25MZ, measuring zone for gas filling press, year 2001 - RTVN-11/25ST, inlet conveyor of gas filling press (or extension for measuring zone), year 2001 - FPS-36/25U2T, gas filling press for argon, year 2001 - RTVN-16/25ST, outlet conveyor 1 of gas filling press, year 2001 - RTVN-16/25ST, outlet conveyor 2 of gas filling press, year 2001 - APKV-25/2, 2-track cork applicator, year 2001 - RTVN-15/25VFE, inlet conveyor of sealing robot, with glass and frame measuring device and barcode reader for shape sealing, year 2001 - VFL-1DS/25, sealing robot, including options for triple units (2 sealing cycles), stepped elements (bottom 0-50 mm, front, rear and top 0-140 mm), as well as special shapes according to Lisec special shapes catalogue, Beckhoff PC, year 2001 - DOS-1PUD + SID, material dosing for PU (base 2 x 200 litres, liquid hardener 200 litres) and SI (base 200 litres, hardener 20 litres), year 2001 Availability now from our stock in Hofkirchen/Austria

Condition: good (used), Year of construction: 2002, functionality: fully functional, manual Lisec desiccant filler A1RL, year 2003, for filling of aluminium spacer from 6-24 mm with at least one right angle Ppedpfx Amjx Ea Ntekst

Condition: new, Year of construction: 2011, functionality: fully functional, input voltage: 24 V, Lisec catalyst pump for 20 liter drums, complete unit. Can be used for PS as well as PU with paste catalyst Ppodewuq Ubspfx Amket Sold EXW our warehouse in Hungary

Condition: excellent (used), Year of construction: 2001, functionality: fully functional, total length: 4,000 mm, total width: 1,500 mm, total height: 3,600 mm, working height: 2,500 mm, input voltage: 400 V, overall weight: 2,700 kg, type of input current: AC, full-automatic Lisec desiccant filling machine A2RL-25/25RN, year 2001 technical details: min spacer width: 6 mm max spacer width: 24 mm max spacer size: 2500 x 2500 mm Pedpfx Amsrtm Saokjpt min spacer size: 400 x 400 power supply: 3x400VAC/50Hz control voltage: 24VDC The machine is in very good condition and can be seen in our warehouse on appointment. 1 special trolley for full-automatic frame support will come with the machine (2 more are available on request as an option)

Condition: new, Year of construction: 2023, functionality: fully functional, type of input current: DC, Sigmatek Central Processing Unit DCP646, new part originally packed 100MHz, 2MB memory HW: 5.6 X1.1 Psdpfxjrtnu Rs Amkopt SW: 97030C-72

Condition: excellent (used), Year of construction: 2001, functionality: fully functional, input voltage: 400 V, type of input current: three-phase, Lisec sealing robot VFL-1DS/25, year 2001, working direction left/right, consisting of following: - RTVN-15/25VFE, inlet conveyor of sealing robot, with glass and frame measuring device and barcode reader for shape sealing, year 2001 - VFL-1DS/25, sealing robot, including options for triple units (2 sealing cycles), stepped elements (bottom 0-50 mm, front, rear and top 0-140 mm), as well as special shapes according to Lisec special shapes catalog, Beckhoff PC, - DOS-1PUD + SID, material dosing for PU (base 2 x 200 liters, liquid hardener 200 liters) and SI (base 200 liters, hardener 20 liters), year 2001, completely overhaule prior delivery Will be sold as described above, EXW our warehouse in Hofkirchen/Austria. No further guarantee or warranty given. Available from stock Ppedpjy Sv Unjfx Amkjt

Condition: good (used), functionality: fully functional, Lisec IG-line for double and triple glass units up to 2500 x 1600 mm, year 1993 - 1999, consisting of: RTV-38/16WE, washing machine inlet conveyor, 1993 VHW-16V8, glass washing machine with 8 brushes for low-e, 2 hot water tanks, 2 sand filters, and blower, 1993 RTVB-16/16ST, washing machine outlet conveyor, 1997 Sofsolution LineScanner RTVB-11/16 ST, inlet conveyor frame set, 1997 RSVB-27/16, frame set section, 1997 RTVB-27/16MZ, measuring section for gas filling press, 1997 FPS-25/16U, gas filling press for Argon, 1997 RTVB-22/16ST, press outlet conveyor 1, 1997 RTVB-22/16ST, press outlet conveyor 2, 1997 RTVB-27/16ST, press outlet conveyor 3, 1997 RTVB-11/16, inlet conveyor for cork applicator, 1997 APK-3/16, automatic cork application device, 1997 RTVB-11/16, outlet conveyor for cork applicator, 1997 RTVB-11/16VE, inlet conveyor sealing robot, 1999 Podpfxer Iil Es Amkspt VL-1N/16, automatic sealing machine for double and triple glass units, 1999 VLA-25, VL-extension with corner correction rollers, 1999 DOS-1/PU, mix and metering station for PU, including nozzle purching device,1999

Condition: excellent (used), Year of construction: 2008, functionality: fully functional, total length: 1,500 mm, total width: 600 mm, total height: 1,000 mm, input voltage: 400 V, type of input current: three-phase, power: 3.3 kW (4.49 HP), Lisec freezing unit KHB-45 for sealing robots and manual sealing machines, manufacturing year 2008 Pjdpfxsyxmzre Amkopt good working order weight: 183 kg current: 1,5A full load current: 4,8A

Condition: excellent (used), Year of construction: 2007, functionality: fully functional, total length: 1,500 mm, total width: 600 mm, total height: 1,000 mm, input voltage: 400 V, overall weight: 183 kg, type of input current: three-phase, power: 2.63 kW (3.58 HP), Lisec freezing unit KHB-30 for Sealing robots and manual sealing machines, year 2007, good working order Full load current 3,7 A Podjyxm Hhopfx Amkspt power supply 3/N/PE 400V 50Hz

Condition: excellent (used), Year of construction: 2001, functionality: fully functional, total length: 37,000 mm, total width: 4,000 mm, total height: 3,750 mm, working height: 500 mm, input voltage: 400 V, type of input current: three-phase, Lisec IG line 4000 x 2500 mm (2001/2007), left/right, for triple units, shape units according to Lisec shape catalogue and 4-sided stepped units: - RTVN-32/25WE, inlet conveyor (3,2 m length), year 2007 (!) - RTL-25VN, with 6 brushes for low-e, including 1 hot water tank, 1 sand filter and 1 blower, year 2007 (!) - RTVN-16/25ST, outlet conveyor (1,6 m length), year 2007 (!) – RSVN-38/25A, frame set section, year 2001 – RTVN-15/25MZ, measuring zone for gas filling press, year 2001 – RTVN-11/25ST, inlet conveyor of gas filling press (or extension for measuring zone), year 2001 – FPS-36/25U2T, gas filling press for argon, year 2001 – RTVN-16/25ST, outlet conveyor 1 of gas filling press, year 2001 – RTVN-16/25ST, outlet conveyor 2 of gas filling press, year 2001 – APKV-25/2, 2-track cork applicator, year 2001 – RTVN-15/25VFE, inlet conveyor of sealing robot, with glass and frame measuring device and barcode reader for shape sealing, year 2001 – VFL-1DS/25, sealing robot, including options for triple units (2 sealing cycles), stepped elements (bottom 0-50 mm, front, rear and top 0-140 mm), as well as special shapes according to Lisec special shapes catalog, Beckhoff PC, year 2001 – DOS-1PUD + SID, material dosing for PU (base 2 x 200 liters, liquid hardener 200 liters) and SI (base 200 liters, hardener 20 liters), year 2001 Ppodpfx Amey Sv Sgoket All machines were working properly until dismantling and are now available from our stock in Hofkirchen/Austria and from our stock in Oroshaza/Hungary

Condition: good (used), Year of construction: 1990, functionality: fully functional, input voltage: 400 V, type of input current: three-phase, Lisec glass washing machine VHW-25V8, year 1990, working direction left to right, consisting of following: - RTV-27/25, extension inlet conveyor washing machine, year 1990 Ppjdpjy Sv Ubsfx Amkot - RTV-38/25WE, inlet conveyor washing machine with glass thickness measurement and automatic low-e detection, year 1990 - VHW-25V8, washing machine with 8 brushes for low-e, including 2 sand filters, 2 hot water tanks and blower, year 1990 - RTVN-32/25ST, outlet conveyor of washing machine, year 2001 All machines are in good working order and can be seen in our warehouse in Hofkirchen/ Austria on appointment.

Condition: excellent (used), Year of construction: 1996, functionality: fully functional, total length: 8,500 mm, total width: 4,000 mm, total height: 3,750 mm, working height: 500 mm, input voltage: 400 V, type of input current: three-phase, Lisec Sealing robot VFL-1/25, year 1996, for maximal unit sizes of 3500 x 2500 mm, partly refurbished in 2025, consisting of following components: - RTVN-11/25VFE, inlet conveyor sealing robot - VFL-1/25, sealing robot including options for shape sealing according to Lisec shape catalogue and sealing of triple units in two cycles, new transport chains on inlet, outlet and take-off section - DOS-1PSD, mixing and metering station for Polysulfide, completely overhauled The machine is in very good working order. All material and hydraulic hoses as well as check valves have been replaced, pumps and metering device fully refurbished Ppjdpfx Amjy Sv Uzjkst The machine can be seen in our warehouse in Hofkirchen/Austria on appointment and is available from our stock.

Condition: good (used), Year of construction: 2000, Lifting capacity: 220 kg Ppodpfey S Sbdjx Amkjt Width: 650 mm Height: 1000 mm Depth: 300 mm Net weight: 30 kg Condition: good, second-hand