Used extruders & extrusion lines for sale (212)

Year of construction: 2004, condition: reconditioned (used), functionality: fully functional, machine/vehicle number: 40EV.118, Twin-screw extruder model EBC 40HT/37D Screw diameter: 42mm Main motor power: 51kW Iaodpoyg Eghsfx Aquju L/D: 37 Center distance: 35mm The extruder consists of a machine base, reduction gearbox, and a distribution gearbox equipped with special bearings capable of ensuring perfect operation with a backpressure of up to 150 bar. The barrel is a modular cylindrical type, with a length equivalent to 37 screw diameters, divided into eight sections. Temperature regulation of each barrel module is achieved by forced circulation of demineralized water through a series of horizontally drilled holes in each module. Heating is provided by cartridge heaters. The screws are made up of interchangeable segments and are mounted on splined shafts, allowing for the configuration best suited to the required processing. Barrels and screws are manufactured from highly wear-resistant steel. The degassing system consists of a 1.5kW liquid ring vacuum pump connected to the dedicated module by easy-to-clean piping; extracted gases are condensed in a special container for easy cleaning. The drive system features a (Siemens) 51kW AC motor with an inverter, enclosed in an electrical cabinet equipped with appropriate safety features and control signals. The control panel (integrated into the extruder) is divided into two sections: power, and temperature control. The cabinet is equipped with an air-conditioning unit. The extruder comes with a closed-loop water/water temperature control unit (1.1kW pump). Chiller not included.

Condition: like new (used), Quantity: 2 2x WEBER DS 88 - 17D complete original processing units Complete conversion kit from the old degassing position to the upstream degassing position - suitable for PVC window recipes, dryblend processing - Enlarged preheating zone - all parts unused in original packaging Iedpfx Ajt H Rrzoqueau Location: Pirmasens We will be happy to send you further information on request.

Year of construction: 2025, condition: new, functionality: fully functional, machine/vehicle number: 2846, We offer, successfully since more than 12 years, installed in all over EU, our new compounding extruders/lines : e.g. Type Alphatec AD-.S 75 with: Segmented, Co-Rotating intermeshing, cylinder water / medium cooled Iasdsi Dtbiepfx Aquju Throughput performance up to 1000 kg/h - depending on the material Drive 132 kW - 250 kW L/D Ratio - according to processing needs Degassing zones - as desired Side feeder type ZS-B - as desired OPTIONAL: > Melt filter/screen changer > Pelletizing systems: strand ST- , water ring WRG or Underwaterpelletizing UWP > Screw configuration according to your needs > Material dosing: volumetric or gravimetric > further accessories Visit us at our Wuppertal plant. Trail-run with your material-mix possible, darte and details uopn request.

Year of construction: 1997, condition: ready for operation (used), functionality: fully functional, controller manufacturer: Siemens, screw diameter: 75 mm, machine/vehicle number: DE27666, TECHNICAL DETAILS Output: 200–450 kg/h Screw diameter: 2 x Ø 75.0 mm Iajdpex Npbpefx Aqusu L/D: 36D MACHINE DETAILS Control system: Siemens Materials: PE, PP, PS, ABS Drive: 143 kW (DC) EQUIPMENT Co-rotating twin-screw Degassing Note: Two screw elements are broken. A side feeder connection or S-cylinder can be offered separately.

Condition: used, dr. wiesner Type: INTEGRA DDV -1...1 bar Ijdewqm Ddepfx Aqujau Product description: dr. wiesner Integra leak test system The classic - for all common test procedures The leak test system for industrial leak-tightness and flow tests with fully graphical color display up to three independent test circuits operable 255 test programs can be stored automatic process optimization autoTune (option) communication via flexibly exchangeable bus coupling modules freely programmable fixture control freely programmable special test procedures The device is suitable for tests according to the relative and differential pressure method with overpressure. Special versions: none Technical data: Electrical supply: 110 ... 230V~; 50 ... 60Hz (connection via power cable to plug XO) pneumatic: clean and dry compressed air max. 7 bar (to connection P) Test pressure range: 0 ... 1000 mbar, electronically regulated Measuring ranges Relative pressure: 0 ... 1000 mbar Differential pressure: +20 mbar Resolution: 0.1 Pa Internal volume: 13 cm³ test circuit 15.0 cm³ reference circuit Electrical interfaces: 3x serial RS232 (COM1; COM2; COM3) 1x digital I/O (X1) pneumatic: Connection test object (Test) Connection reference circuit (Ref.) Enclosure Protection class: IP40 Dimensions: 450x185x380mm (WxHxD) Weight approx. 15.5kg Condition: used (Changes and errors in the technical data, information reserved!) We are happy to answer further questions by phone.

Condition: good (used), Extruder for the production of plastic pipes Ijdexcwxyspfx Aqusau The machine can be inspected by appointment! Videos demonstrating its operation can be viewed on the manufacturer's website!

Condition: excellent (used), Extruder for 3D Printing Filament Production – 25/25 L/D We offer a high-quality extruder for the production of 3D printing filament. The system is designed for continuous industrial operation and is characterized by its robust construction, precise temperature control, and excellent material homogenization. Ideal for manufacturers, material developers, and research institutes. Technical Equipment & Features • Extruder 25/25 L/D – efficiently designed screw geometry for uniform melt quality • High-performance melting zone – precise temperature regulation for consistent filament quality Ijdpsxwvqqefx Aqujau • Die for 3D filament extrusion – suitable for all standard filament diameters • Cooling bath – stable filament take-off and optimized cooling section • Haul-off unit – finely adjustable pulling speed for exact diameter stability • Winding and spooling device – automatic filament winding • Optimally suited for PLA, PETG, ABS, TPU, and many technical materials

Year of construction: 2022, condition: new, functionality: fully functional, - Grinder for e.g. lumps - New / unused machine - Open rotor Isdpfsp E Anvox Aqueau - Grinder 650 mm x 550 mm - Control unit Spare parts can be supplied. (sieve, knife etc.)

Condition: good (used), functionality: fully functional, Twin screw extruder / laboratory extruder - 2 x 30mm screw diameter - 4x heating zones - dosing Iaedpfxsu Hik De Aquju - Control system

Year of construction: 2020, condition: new, Feeding for granulate and powder Isdpfjfmn Ufsx Aqueau

Year of construction: 1996, condition: ready for operation (used), functionality: fully functional, screw conveyor diameter: 25 mm, TECHNICAL DETAILS Screw diameter: 2 x 25.0 mm L/D: 40:1 MACHINE DETAILS Total power: 12.0 kW EQUIPMENT Platform 4-way dosing system from Brabender Scholz dosing control Easytouch (year of manufacture 2009) 1x side feeder Degassing Strand die Water bath by Collin Scheer granulator SGS 50-ET Isdsxx Uk Espfx Aqueau

Condition: new, Cylinder, packed in wooden box, cylinder with ceramic heaters for 90mm extruder Iodoua Ti Iopfx Aqueau grooved feed

Year of construction: 1987, condition: good (used), Brand: Collin Pilot & Lab Solutions Model: P300 Presse Year of construction: 1987 Plate dimensions: 296 x 296 mm Machine no.: 6300 22 86 Iaodpfx Aoycggbequeu Connected load: 18 kW Dimensions (LxWxH): 1,150 x 530 x 1,750 mm Weight: 650 kg

Year of construction: 2023, condition: new, functionality: fully functional, Xtrutech XTS 35 for powder coatings (180-350 kg/hr) 1. PURPOSE AND MAIN FUNCTIONS OF THE LINE The extrusion line for powder coating production is part of a whole production process and is used for the production of polymer powder coatings. The extrusion line includes the following technological processes: formation of a homogeneous melt of heated powder coating by mixing, shaping of the melt, subsequent cooling of the product and its crushing into fine fractions. 2. LINE COMPONENTS - Twin-screw extruder type XTS Iodpfx Aewz Ntioqueau 3. DESCRIPTION OF THE EXTRUDER COMPONENTS 3.1. Twin-screw extruder type XTS 35 The extruder for powder coating production consists of: - 24D hydraulically opening barrels at the top and bottom, providing quick access for cleaning, maintenance and emergency repair of barrel liners and screw element shafts. - Rectangular loading port for dosing of materials which are difficult to dose. - Robust high flow water cooled units with 5 electrically heated (aluminium bronze heating plates of 2 kW each) control zones that provide excellent temperature control. Maximum operating temperature is 350°C. - The barrel on the discharge side is equipped with a cooled discharge adapter and a knife. - Screws with screw elements. Screw speed 0 - 900 rpm. Water cooled AC motor power of 26kW. The stepless (PIV) gearbox is rated at 139Nm and protected by an automatic torque limiter. - Latch lock / quick-release coupling of shaft connection and toothed shaft. Mains supply voltage: 400±6%, 3 phases, 50 Hz (o+earth). Control: 24V. Water-supply: 70 l/min at 15°C and a coolant pressure of 4bar. Approximate dimensions: L=2250mm W=1000mm H=1600mm Approximate weight: 1600kg. High-volume geometry D/d =1.8 AC motor power 26 kW Screw speed 900 rpm Average output 180 - 220 kg/h, max. 350 kg/h

Condition: new, functionality: fully functional, XTS56 - 24D Twin Screw Extruder Ijdpfx Aqow Snlwousau • Water Cooled 130kW AC Motor and Drive. – Low Noise

Condition: used, functionality: fully functional, color: green, The calender consists of the following units: - A set of 4 rollers - A set of roller drives - Frames - A running gear - A control cabinet The set of rollers consists of 4 rollers of different diameters. The rollers are mounted on a common frame, which allows you to change their mutual position (change the gap between the rollers). The gap between rollers 1 and 2 is adjusted using adjustment screws driven by MRA-63 type worm gears. The gap between rollers 2 and 3 is adjusted manually by turning the adjustment screws. Each roller has an individual drive, allowing you to change the rotational speed. The rotational speed of the rollers and the thickness of the plate are set on the operating panel of the Calender control cabinet. A pressure roller and disc knives for cutting the outer edges of the plate are installed above the last roller (No. 4). The knife spacing is adjustable, which allows the production of boards of various widths. Roller diameter: Roller 1 – 515.00 mm Roller 2 – 315.00 mm Roller 3 – 315.00 mm Roller 4 – 355.00 mm Roller 5 – 95.00 mm Disc knife 6 – 200.00 mm Iajdowcxufopfx Aquou - Roller width 230 cm - Roller working width 210 cm - Total width 300 cm - Height 250 cm - Extruder departure / arrival (calender-extruder) 70 cm - Length with arrival 350 cm Power supply - 3 x 400 V (32A) - Motors 4 x 0.75 kW - Fans 2 x 0.25 kW - Pumps 2 x 1.1 kW - Access motors 2x 0.25 kW - Central pump 1 x 0.5 kW - Roller pressure motors 2 x 0.25 kW - Razor blade motors 2 x 0.15 kW

Year of construction: 2009, condition: excellent (used), functionality: fully functional, machine/vehicle number: P251001170, Complete extrusion line for ABS/PP furniture edge banding from the renowned brand AMUT The line is in perfect technical condition, regularly serviced, and currently in operation. The set includes a spare screw, further enhancing its operational value. Line equipment: 1. AMUT EA 100 extruder 2. AMUT calender station with CLV 1200 roller conveyor 3. AMUT TRK 100 edge banding machine 4. AMUT edge winder 5. Calendar cooling unit with a complete set of hoses 6. Electrical control cabinets for the entire line Material: ABS, PP (virgin + regrind) Working width: 700 mm (after side trimming) Nominal width: 1000 mm Iaedpfx Aqsxiu Npjueu Thickness range: 0.5 – 2 mm Extruder: single-screw AMUT EA100 33D Extruder output: ABS: 320 kg/h PP: 350 kg/h Final product: 2 rolls, each 350 mm wide Line speed: up to 25 m/min Year of production: 2009 Technical condition: perfect, complete with spare screw

Year of construction: 2006, condition: good (used), Designed for COEX- castfoil production with additional coating unit. The extrusion part of the line has 2 extruders; the coating unit has 1 extruder. Processing of thermo plastics in a temperature range of 90-300°C. Different combinations of production are possible: - main unit (CoEx) with coating 
 - main extruder (CoEx) without coating 
 Ijdpfxjpaiais Aquoau - coating processing over winding unit on an existing base film 
 For production in the different described combinations you can lock the not necessary equipment parts. 
 POSSIBLE LAYER STRUCTURES: Main extruder: - Mono film if necessary with tensilized film 
 - 3- layer film (A-B-A) if necessary with tensilized film 
Coating unit: 
 - mono film on excisting base film if necessary with second tensilized film Unwind diameter: max. 1.000 mm Allowed roll/bobbin weight: max1.500kg

Year of construction: 2011, condition: good (used), The extrusion line No. 1 was designed for cast film production. Processing of thermo plastics in a temperature range of 150-300°C. POSSIBLE LAYER STRUCTURES: - mono film
 Iasdpjpah U Tjfx Aqueu - 3- layer (A-B+C-A) - 5- layer (A-B-C-B-A) DATA OF FACILITY Total output of extruders max. 2230 kg/h Extruder A: 90/33 L/D max. 330 kg/h Extruder B.: 135/33 L/D max. 950 kg/h Extruder C.: 135/33 L/D max. 950 kg/h Film width range (net): 1600 - 2110 mm Two rolls cutting possible (2x 800 – 2x 1055mm) Thickness range: 25-580μm Production speed: 10 - 150m/min Roll width: 2500 mm Max. roll weight: 2000kg ADDITIONAL COMPONENTS (QUALITY): Non-contact thickness equipment for automatic TD profile measurement with double side corona treatment (max. 12000W) Optical inspection system, including marker system if failures are detected, incident and transmitted light system INFRA STRUCTURE (ADDITIONAL UNITS): Dryer 1 – 4 with 4500-liter volume; heating capacity 48kw
 Dryer 5 with 2500-liter volume; heating capacity 20kw
 Dryer 6 with 1500-liter volume; heating capacity 15kw
 Each extruder has a gravimetrical batch-dosing unit with 3 stations. Each extruder has a melting pump and a 2-piston filter change system. MAIN LINE COMPONENTS MANUFACTURERS: SML: extruder; Chair, rollers, winding device GWK: cooling extruder KREYENBORG: screen changer Cloeren: feed block, slot die PIOVAN: dryer, dosing device SERVE: Edge band cutting device MATHO: suction RAPID: Edge strip shredder KONGSHILDE: Recyling edge strips, start rollers INFSTAUB: filling station SMK: chillers SIEMENS: control OCS: camera system SEMET: labeling system AFS: Corona Sation BETA CONTROLL: Radiometric thickness measurement SML: autom. FYLING SPLICE winding unit, BECKOFF control SIMCO: antistatic ALTEK: automatic roll manipulator (transfer carriage)

Year of construction: 2005, condition: good (used), Brand: Rollepaal Pipe Extrusion Technology B.V. Iedpfx Asui Ixiequsau Model: RSV 8/1 Year of construction: 2005 Pipe outer diameter max: 8 mm Cooling length: 1000 mm Spray pump: 2.2 kW

Year of construction: 2025, condition: new, functionality: fully functional, machine/vehicle number: ZSK27mV, The following elements and quantities are available for sale: 4x conveyor element/conveying element 22/11 – 8027-05.21-022/011-24 10x conveyor element/conveying element 22/22 – 8027-05.21-022/022-24 6x conveyor element/conveying element 22/33 – 8027-05.21-022/033-24 Iajdpfx Aqevytdksusu 6x conveyor element/conveying element 33/16.5 – 8027-05.21-033/00165-24 10x conveyor element/conveying element 33/33 – 8027-05.21-033/033-24 10x conveyor element/conveying element 44/22 – 8027-05.21-044/022-24 10x conveyor element/conveying element 55/27.5 – 8027-05.21-055/027.5-24 10x kneading block/kneading element KB30/7/22 SAM – 8027-05.27-307/022-27 12x kneading block/kneading element KB30/5/11 – 8027-05.26-305 / 011-24 12x kneading block/kneading element KB30/5/22 – 8027-05.26-305 / 022-24 6x Mixing elements SME 22/22 – 8027-05.92-388/022-64 Material: 1.2379 - X153CrMoV12 (CPPU) Available immediately.

Year of construction: 2000, condition: ready for operation (used), SINGLE SCREW EXTRUDER GRAEWE-FANGLI 60X33 Application: PE PIPES or PP PIPES Typ: 60 X 33 Screw diameter:60 Drive: 75 KW Output capacity PE: approx. 200 - 250 kg/h Condition: Good, ready to use Iaedsifgwhjpfx Aqueu The extruder is my property Sachal Extrusionmachines Bahnhofstrasse 6 D-26345 Bockhorn/Grabstede Germany

Year of construction: 2007, condition: ready for operation (used), functionality: fully functional, machine/vehicle number: BA 32-200, SICA MUFFENMASCHINE 2F.1T 32-200 Application: KG-U PVC pipes, Pipe lengths: 0.5 m, 1 m, 2 m, 5 m, 6 m Year of manufacture: 2007 Iasdpfx Aqexiy R Eoueu 1 socket per cycle Socketing tools: 110×3.2 The socketing machine is in very good condition, still operational and scheduled to be taken out of production in 3-4 months.

Year of construction: 1993, operating hours: 104,599 h, condition: good (used), Brand Cincinnati Milacron Austria GmbH Type CMT 35 Machine number 2005723/10 Type Screw Conical Double Screw Year of manufacturing 1993 Iaodovl Hzgjpfx Aqueu Machine hours 104,599 hours Screw Diameter 35mm Dimensions (LxWxH) 3200 x 1500 x 1720 mm Weight (approx) 2000kg

Condition: good (used), Single Screw Iasdpfevri Ddex Aqusu Screw diameter 25 mm Dimensions (LxWxH) 1860 x 900 x 1850 mm Options • Including haul-off • Including cooling bath