Used extruders & extrusion lines for sale (193)

Year of construction: 2000, condition: used, Rotational speed: 227/min, power: 31kW, heating output: 7.8kW, length: 1952mm, width: 840mm, height: 1920mm, weight: 820kg. Rsdpfx Aoduyyzob Isr

Year of construction: 1970, condition: ready for operation (used), A complete extrusion line with a Reifenhäuser extruder and a gravimetric system Plast-Control (2006) is available. 1) Unwinder 1. 2) Primer unit and hotmelt unit for water-based adhesive lamination. 3) Dryer. 4) Unwinder 2. 5) Dolci extruder for extrusion lamination. 6) Unwinder 3. 7) Two printing units with additional dryer. 8) Extruder Reifenhäuser. 9) Rewinder. 10) Guide roller in the basement. 11) Web guiding under unwinder 1 in the basement. 12) 2x resin silos in the basement. This is a complete extrusion line with peripheral equipment. Documentation available. An on-site inspection is possible. Rsdpow R Dhrefx Ab Ier

Year of construction: 2013, condition: ready for operation (used), A complete Artec recycling and extrusion line is available. Material: PE/PP/PS/ABS/LDPE/HDPE/MDPE, screw diameter: 145mm, L/D ratio: 42, extrusion capacity: 700kg/h, degassing: 2-fold, shredder/extruder/screen changer output: 55kW/609kW/55kW. Total plant dimensions X/Y/Z: approx. 20700mm/3000mm/3400mm, control system: Siemens. Including shredder, conveying units, storage and mixing silo, feed belt, extruder, vacuum pump, melt filter, hot granulating cut-off, bag filling and weighing station and bagging station. Documentation available. On-site inspection is possible. Rjdpjv Ip S Hefx Ab Ior

Year of construction: 2016, condition: ready for operation (used), Control panel: Siemens SIMATIC HMI, connected load: 80kW, weight: 1.85t, operating hours: approx. 4500h, with Kreyenborg feed hopper, year of manufacture: 2017, and Trendelkamp screen changer. Documentation is complete, on-site inspection is possible. Rodpfx Asv Uz Aweb Ier

Year of construction: 1998, condition: ready for operation (used), A complete PS foam extrusion line (capacity: 350kg-400kg/h) is available. 1) 7x dosing units K-Tron Switzerland and Coperion, main components: 3, side components: 4, capacity: 350kg-400kg/h. 2) Primary extruder Battenfeld, year of manufacture: 1998, screw diameter: 120mm, screen changer: Gneuss, double piston pump: LEWA. Including gas injection. 3) Secondary extruder, screw diameter: 150mm/33D. Including unused old die and a coextruder Kühne with 50mm screw diameter. 4) Oil-heated Sunwell round die. 5) Calibration unit Dorn, knives: 2, films: 2, film width: 1080mm. 6) Take-off unit Gloenco Double S Haul-Off. 7) PS film winder, positions: 4, simultaneously operated positions: 2, winding speed range: 10m-30m/min, roll weight range: 150kg-300kg, roll length range: 500mm-800mm. Including discharge with ionization. Documentation available. An on-site inspection is possible. This line is sold ONLY to customers outside Europe. Rsdpjxq Exqofx Ab Isr

Year of construction: 2014, condition: ready for operation (used), A complete Artec recycling and extrusion line is available. Material: PE/PP/PS/ABS/LDPE/HDPE/MDPE, screw diameter: 125mm, L/D ratio: 42, extrusion capacity: 650kg/h, degassing: 2-fold, shredder/extruder/screen changer output: 55kW/512kW/55kW. Total plant dimensions X/Y/Z: approx. 20700mm/3000mm/3400mm, control system: Siemens. Including shredder, conveying units, storage and mixing silo, feed belt, extruder, vacuum pump, melt filter, hot granulating cut-off, bag filling and weighing station and bagging station. Documentation available. On-site inspection is possible. The system has extensively documented defects. Rjdpfxjv Ip Syj Ab Ior

Year of construction: 1990, condition: ready for operation (used), A total of three extruders including throughput measurements (scales), as-new barrels (2018) and overhauled screws are available. Total extrusion capacity: approx. 100kg/h. 1) DC smoothbore extruder, output: 17kW, machine dimensions X/Y/Z: approx. 2300mm/600mm/1100mm. 2) DC smooth tube extruder, power: 32kW, machine dimensions X/Y/Z: approx. 3000mm/700mm/1200mm. 3) DC grooved barrel extruder, output: 49kW, machine dimensions X/Y/Z: approx. 3000mm/700mm/1200mm. On-site inspection is possible. Rsdpfxovw Aqho Ab Ier

Year of construction: 1982, condition: ready for operation (used), A twin screw extruder is offered. Drive: ASEA electric motor type ACA 200-6L, 50.5kW, 1460rpm. Inspection possible by prior arrangement. Rodpfx Asx Hifvjb Ior

Condition: ready for operation (used), One complete and one partially dismantled extruder system Davis are available. 1) Davis Standard DS-25, power: 6385W, max. melt pressure: 700bar, max. temperature: 315°C. Including 4x screws, 6x bursting discs, Digicolor dryer, platform, screen changer with heating and sealing pack, new cylinder, 3x screw seals, and spare drive motor. 2) Davis Standard DS-20, power: 4500W, max. operating pressure: 700kg/cm², max. temperature: 315°C. Including Conair dryer, 3x screws, screen changer with heating and sealing pack, cast housing, extrusion tool, and spare drive motor. General accessories: various ring heaters, 3x Eurotherm temperature controllers, and 3x Eurotherm pressure sensors. Documentation available. An on-site inspection is possible. Rsdpfx Ajxn S Umeb Ier

Condition: like new (used), High-Quality Meltblown Production Line for Nonwovens A complete machine inspection was carried out by the manufacturer's service team on 17.12.2025. Inspection report available. Commissioning at the customer's site can be offered upon request. Redpfx Asx Hx Rneb Ijr Operating hours: 80 hours (commissioning only) Price for a new machine: EUR 7,500,000 • Manufacturer: Reifenhäuser GmbH & Co. KG Maschinenfabrik • Model: Reicofil MB 1600 • Year of manufacture: 2021 • Last commissioning: 2022 Technical specifications: • Working width: 1,600 mm • Material: Polypropylene (PP), MFI 230 / 2.16 > 400 g/10 min • Output: Up to 65 kg/h per meter width • Product weight: 10–80 g/m² • Production speed: 5–80 m/min • Die head: MB 1600, 50 h/in • Extruder: RT-1101-1-100, L/D 30 • Heating capacity, rotary beam: 65–172 kW • Winder: contact winder with preset reel change • Max. winding diameter: 1,250 mm • Web width: 1,700 mm • Winding tension: 10–100 N/m Additional equipment and accessories: • 3-component dosing system • 80 mm automatic seat changer • Ultrasonic cleaning system • Pyrolysis unit • Ozone extraction • Cutting knives • Central control panel with touchscreen and data entry

Year of construction: 1993, condition: excellent (used), functionality: fully functional, Werner & Pfleiderer Twin-Screw Extruder ZSK 40 – Excellent Condition For sale is a Werner & Pfleiderer (WP) ZSK 40 co-rotating twin-screw extruder. Technical Specifications: • Machine Type: ZSK 40 • Screw Diameter: 40 mm • Screw Length: 7 barrels × 4 D → approx. 28 L/D • Main Drive: 34.5 kW • Motor Speed: 1,800 rpm • Screw Speed: 40 – 400 rpm • Max. Torque per Screw Shaft: 325 Nm • Heating: Electric, connected load approx. 17 kW • Cooling: Water chiller unit Redpfx Aoycuuysb Isr • Temperature Control Zones: 6 zones • Barrel Temperature Sensors: 6 • Material Temperature Sensor: 1 • Material Pressure Sensor: 1 Barrel Configuration: • Feed barrel with liquid injection port • Open barrel with insert and 2 liquid injection ports • Multiple closed barrels with ports for liquid injection or measurement points • Degassing barrel General Features: • Co-rotating, closely intermeshing (self-cleaning) screws • High mixing and dispersing performance thanks to modular mixing and kneading elements • Modular system for screws and barrels • Drive section and process section mounted on stable base frame Fields of Application: • Plastics compounding • Masterbatch • Additive and filler incorporation • Laboratory and pilot plant use • Formulation and product development Condition & Runtime: According to the operating hour counter, the machine has run for less than one year and is therefore in excellent, nearly as-new condition. The screw elements are also as new. Options & Customizations: Upon request, we can design and install suitable tooling, such as strand dies, and integrate additional peripherals such as screen changers, pelletizing units, dosing technology, or other customer-specific components. The machine can thus be configured and delivered ready-for-operation according to customer requirements.

Year of construction: 1987, condition: good (used), Brand: Collin Pilot & Lab Solutions Model: P300 Presse Year of construction: 1987 Plate dimensions: 296 x 296 mm Machine no.: 6300 22 86 Rsdpfx Absycggbe Ior Connected load: 18 kW Dimensions (LxWxH): 1,150 x 530 x 1,750 mm Weight: 650 kg

Condition: good (used), WEBER tube extrusion line including: Redpfsvryhyex Ab Ijr WEBER DS 8.5 Elmepla saw Battenfeld R200/6 Battenfeld V125

Year of construction: 2025, condition: new, New PPR extrusion machine for PPR pipe starting from 20mm up to 40mm Rjdpfx Aeyhh Udjb Isr

Condition: ready for operation (used), Year of construction: 1998, screw diameter: 85 mm, Complete extrusion line. Individual components can also be offered on request. The line has been used for making tubes from PP filled with chalk and barium sulfate. Components: - 4 Components Colortronic dosing (new controller in 2017) - Berstorff KMC 85/2 (screws renewed in 2019) - Sidefeeder - Complete control of dosing and extruder - Single oil tempering - Stomach melting pump Redpfx Absu Rda Ij Isr - Krausmaffei Extrusion head 40 to 160 mm (with various sets) - Vacuum tank Battenfeld V250VA - Spray bath K250 VA Battenfeld - Pulling mechanism C250 - 4 Sica - Saw CCM 32/170-2 Roller pole - Tilting table Battenfeld

Year of construction: 2014, operating hours: 30,000 h, condition: used, functionality: fully functional, machine/vehicle number: 20526471, Laboratory Twin Screw Extruder – Coperion ZSK 26 Mc18 (40 L/D) with a 26 mm screw diameter Featuring all the characteristics of the ZSK Mc18 series, this extruder is ideal for formulation development and compound sampling, as well as for manufacturing small compound batches of up to approximately 180 kg/h. Compared to the previous model ZSK 26 Mc, the new laboratory extruder enables throughput increases of up to 100%, owing to the torque having been increased to 15 Nm/cm³. The extruder is mobile and space-saving as the control cabinet is integrated into the machine’s base frame. Heating and cooling systems are installed and operational (plug & play). Machine No.: 20526471 Year of manufacture: 2012 Operating hours: approx. 30,000 h Condition: Used, in operation Technical specifications: Extruder type: Twin screw extruder Model: ZSK 26 Mc18 Process length: 40 L/D Drive power: 36.9 kW Power supply: 3 × 400 V (−10 % / +6 %), 50 Hz ±2 % Barrel configuration: E-0-0-S-0-0-1-0-V-0 Output: approx. 150–200 kg/h, depending on formulation, raw material, and required product quality Applications: Highly filled compounds, masterbatch applications Suitable for processing: LLDPE, LDPE, HDPE, PP, PPR, PS, ABS, PET, and biopolymers Scope of delivery Gravimetric feeding system: - K-Tron gravimetric feeders - 1 × pellet feeder - 1 × powder feeder (twin screw design) Side feeding / degassing: - 1 × side feeder ZS-B25 - 1 × vacuum side degassing unit ZS-EG25 Vacuum system: Busch vacuum pump Plastex MI 0120 B 222 CNX6, specifically designed for PET applications. Please note: Vacuum pump is not included. Process monitoring: - Melt pressure sensor system - Melt temperature sensor system Rjdpfx Asyhd Dbob Ier - PLC integration Pelletizing system (strand pelletizing): - Air dryer unit not included - Strand pelletizer SP50 - Water bath Peripheral equipment: - Bag emptying station for pellets - Conveying system to the feeders Spare parts: - Spare parts included, second screw set.

Year of construction: 2004, condition: reconditioned (used), functionality: fully functional, machine/vehicle number: 40EV.118, Twin-screw extruder model EBC 40HT/37D Screw diameter: 42mm Main motor power: 51kW L/D: 37 Center distance: 35mm The extruder consists of a machine base, reduction gearbox, and a distribution gearbox equipped with special bearings capable of ensuring perfect operation with a backpressure of up to 150 bar. The barrel is a modular cylindrical type, with a length equivalent to 37 screw diameters, divided into eight sections. Temperature regulation of each barrel module is achieved by forced circulation of demineralized water through a series of horizontally drilled holes in each module. Heating is provided by cartridge heaters. The screws are made up of interchangeable segments and are mounted on splined shafts, allowing for the configuration best suited to the required processing. Barrels and screws are manufactured from highly wear-resistant steel. The degassing system consists of a 1.5kW liquid ring vacuum pump connected to the dedicated module by easy-to-clean piping; extracted gases are condensed in a special container for easy cleaning. Redpfx Abeyg Egho Ior The drive system features a (Siemens) 51kW AC motor with an inverter, enclosed in an electrical cabinet equipped with appropriate safety features and control signals. The control panel (integrated into the extruder) is divided into two sections: power, and temperature control. The cabinet is equipped with an air-conditioning unit. The extruder comes with a closed-loop water/water temperature control unit (1.1kW pump). Chiller not included.

Year of construction: 2025, condition: new, New plastic pipe extruder machine with down stream pipe PE 100 or HDPE starting pipe diameter from 20mm till 65mm Redpfsyguzhox Ab Ior

Condition: good (used), Year of construction: 1995, operating hours: 60,269 h, Brand: Cincinnati Milacron Model: CMS 60-25 BL Serial No.: 2008877/10 Screw Type: Single screw Year of manufacture: 1995 Operating hours: 60,269 hours Screw diameter: 60 mm L/D ratio: 25 L/D Motor power: 28 kW Rodeyaa S Sspfx Ab Ior

Year of construction: 1994, condition: used, weight 2,2 t extruder diameter x mm x +++++ Please note: The machine is dismantled and ready for loading. It is not possible to show it under power or make a video. Our offer includes already the best pictures. So we don’t have and won’t send additional pictures. Rodpfxox U A Iao Ab Isr +++++

Condition: excellent (used), Year of construction: 1999, BATTENFELD PE/PP PIPE HEAD PO 250 / 600 SI Type: PO 250/600 SI. Screen basket Year of manufacture: 1999 Little used Condition: Very good, needs cleaning Redpfx Absvy It To Ier With co-extruder Extrudex EN 25, year of manufacture 1999 For color strips The system is my property Location: Sachal Extrusionsmaschinen Bahnhofstr 6 D-26345 Bockhorn-Grabstede

Year of construction: 1998, condition: good (used), Part of an old direct extrusion line for pipes (which is also still available). This machine is supplied with the following components: Rsdpox S Rimofx Ab Ier - 4-component Colortronic dosing system (new control installed in 2017) - Berstorff KMC 85/2 (screws renewed in 2019) - Sidefeeder - Complete control system for dosing and extruder - Single-circuit oil tempering - Maag melt pump

Year of construction: 2026, condition: new, Extruder 30 mm - 28 l/d with die for weldingwire extrusion or profilextrusion with cooling bath with adhesive water blow-off Redei Tu U Uepfx Ab Ior with haul-off with winder and guiding device

Year of construction: 1986, condition: used, functionality: fully functional, We are offering this used AMUT BA145 machine, manufactured in 1986. Manufacturer: AMUT Redpfx Aeyc Ni Sjb Ior Model: BA145 Year of manufacture: 1986 Condition: used Category ID: 452 If you have any additional questions or require more information, please send us a message or call us.

Condition: refurbished (used), Year of construction: 1991, functionality: fully functional, Complete extrusion line for PVC profiles, fully overhauled and tested EXTRUDER: • IDE 75/25 type ME7/3 Rsdpfx Abjya Elds Ier • single screw, PVC profile geometry and barrel in good condition • screen control (retrofitted by the manufacturer) • year of manufacture: 1993 • 35kW motor, 4 to 40 rpm COEXTRUDER: • IDE MEB 30/25D • Single screw Ø30mm 25LD • PVC profile geometry screw and sleeve in good condition • Year of manufacture: 1992 • 3.8kW motor, 6 to 64 rpm CALIBRATION : • IDE • Length: 2 metres • 2 vacuum pumps, 16 valves • 14 water valves • Manual horizontal and longitudinal adjustments HAUL OFF: • IDE ME30/5 • Year of manufacture: 1993 • Contact length: 1100 mm • Width: 100 mm CIRCULAR SAW • IDE ME52 • Blade: 300 mm • Pneumatic carriage travel 180 mm • Year of manufacture: 1991 TILTING TABLE • IDE • Length: 4000 mm • Pneumatic movement Everything is in very good overall condition, the machines are very clean and ready for use.