Used Extruders & extrusion lines for sale (231)

Year of construction: 2022, Condition: new, Functionality: fully functional, - Grinder for e.g. lumps Djb Hlrjp E Anvotcjkl - New / unused machine - Open rotor - Grinder 650 mm x 550 mm - Control unit Spare parts can be supplied. (sieve, knife etc.)

Year of construction: 2006, Condition: ready for operation (used), Additional Equipment Deb Hlrsv Sfw Hjtcskl Machine includes an SA 500 extractor built in 2006 and a 6m long cooling section. This KUHNE KS45-24D compounding extruder was manufactured in 2006. Ideal for processing a variety of materials, it offers robust construction and reliable performance. Consider the opportunity to buy this KUHNE KS45-24D compounding extruder. Contact us for more information. Application Types Extrusion

Condition: used, Twin screw extruder 34mm diameter 400 volts, 128 amps 2 pairs of spare screws Dsb Hlrtjv U Nnuocskl Used for powder coatings Hourly output 250-400 kg depending on the product

Year of construction: 2003, Condition: good (used), Functionality: fully functional, screw diameter: 27 mm, TECHNICAL DETAILS Capacity: 10 – 40 kg/h Dkeb Hlrtov U Da Sscol Screw and Barrel Technology Design: Synchronous Screw center distance: 23 mm Screw diameter: 2 × Ø27.0 mm Kneading disc and kneading block diameter: 27.0 mm Screw material: 1.2379 Cylinder diameter: 27.2 H8 Cylinder material: 1.8550 nitrided, nitriding layer 0.5–0.6 mm Screw length: 40 D Screw torque: 2 × 100 Nm Screw speed: max. 500 rpm Drive Drive type: DC shunt motor Drive power: 10.5 kW Motor speed: max. 2,690 rpm Gear ratio: i = 5.38 Power transmission: Clutch Heating and cooling system Number of heating zones: 11 Heating capacity: 9.85 kW Number of cooling zones: 9 Cooling type: ZIK (Intensive Cylinder Cooling) Filling zone cooling: Water Filling zone cooling water consumption: 30 l/h Process parameters Melt pressure: max. 300 bar Melt temperature: max. 350 °C Injection height: 1,050 mm Dimensions and weight Weight: approx. 950 kg Length: 2,630 mm EQUIPMENT - Segmented screws and barrels - Synchronized technology - Degassing

Year of construction: 2016, Condition: ready for operation (used), Control panel: Siemens SIMATIC HMI, connected load: 80kW, weight: 1.85t, operating hours: approx. 4500h, with Kreyenborg feed hopper, year of manufacture: 2017, and Trendelkamp screen changer. Documentation is complete, on-site inspection is possible. Dob Hlrtov Uz Awscekl

Condition: excellent (used), 1040mm wide Welex 3 roll polishing stack with 1040mm x 450mm rolls, pump group, 2 roll haul off. Silicone bath. Dkob Hlovhch Isrtcsl

Year of construction: 2020, Condition: new, Feeding for granulate and powder Dob Hlefmn Ufsrtcekl

Year of construction: 1988, Condition: excellent (used), Extrudeuse double vis de laboratoire Werner & Pfleiderer ZSK W54 Dkjbortbd Us Hlrtcjl Caractéristiques : Diamètre de vis = 57,8mm

Year of construction: 2016, Condition: ready for operation (used), General Data Measurements width 6900 mm Measurements depth 32400 mm Deboumpade Hlrtcjkl Measurements height 4800 mm Control Unit Model PLC This ROLBATCH RBSDMS-IZS-678 was made in 2016. It is equipped with a Mill PLC control unit. The machine has a maximum film thickness of 0.3-1 mm. Application Types Extrusion

Year of construction: 2015, operating hours: 3,500 h, Condition: ready for operation (used), Functionality: fully functional, controller manufacturer: Siemens, TECHNICAL DETAILS Processable materials: PE, PP, PS, ABS + fillers Capacity: 50 – 200 kg/h Screws and barrels Screw diameter: 2 × Ø 33.0 mm Length-to-diameter ratio (L/D): 54:1 Screw speed: max. 1,200 rpm Max. continuous operating temperature: 350 °C MACHINE DETAILS Motor power: 64.0 kW EQUIPMENT - Co-rotating screw conveyor - 2 × atmospheric degassing Dkjb Hlrtjv Uqf Ijcel - 2 × side feeders - Segmented screws and barrels

Year of construction: 2017, Condition: good (used), Used Xtrutech Extruder XTS 24 for sale. The extruder is fully functional and was used in the powder coating sector with many spare parts. Debevcynus Hlrtcjkl

Year of construction: 1995, Condition: excellent (used), 1800mm Wide Kuhne Coextrusion Sheet Line. 150mm, 70mm, 45mm Extruders, Edi Die, 1800mm X 500mm Diameter Roll Stack, Haul Off Guillotine 1995 * 150mm Kuhne 33D vented primary extruder with electrically heated, fan cooled barrel with PS/ABS screw. Main motor 371kw. Screen changer, gear pump static mixer and 3 layer feedblock with replaceable inserts * 70mm Kuhne coextruder 33D vented. Electrically heated fan cooled barrel. Screen changer and gear pump Deb Hlrtev Tww Ijcskl * 45mm Kuhne coextruder with screen changer * 1800mm wide Kuhne model GA5V/1800 calender with 500mm diameter rolls individual servo motors. * Upgraded pressurised 3 zone thermoregulation with heaters, pumps and heat exchangers.

Year of construction: 2014, Condition: excellent (used), Functionality: fully functional, - for extruding rigid, flexible, corrugated profiles - KIWEX China product - 4 heating zones - air cooling - 7.5 kw motor - extruder with adjustable speed - water cooling, 1.25 kw pump - drawing belt with 2 0.5 kw motors - with 2-station winding installation - equipped with linear counter - various technological attachments (creepers for corrugated tubes, various screws) Dkob Hlsv Rgtgsrtcol

Condition: new, Functionality: fully functional, New and unused machine. - Berstorff Twin screw Extruder ZE 130A -Extruder Screw 2x140 mm L/D 30:1 Building Year: 1988 (unused) Engine: DC Motor - 250 kW Screw-Rotation: 300 Rpm Dobed Htygs Hlrtcekl Extruder-Heating: 70 kW With two degassing zones

Year of construction: 2013, operating hours: 100 h, Condition: used, Functionality: unexamined, Platex - Planetary System Extruder Deb Hlrjukv Shstcskl The planetary system consists of one hollow barrel and a main spindle (screw) and several satellite screws (spindles) which work harmoniously with each other enabling the best-known mixing and plastification process. Planetary extruder system compared to other extruder systems provides a much better plastification thanks to the homogeneous and very efficient raw material mixing action. Our Planetary Extruder performs at least 10 times better plastification and homogeneity compared to the Twin-Screw or Single-Screw Extruders.

Year of construction: 1996, Condition: good (used), Make:KRAUSS-MAFFEI Description: used type: KMD-2-50-KK output capacity: max. approx. 140-180 kg/h for H-PVC pipes, depending on material and product this can vary Djb Hlsh Nmt Djrtcskl year of construction:1996 Screw diameter:50-103 mm (conical) Screw length:1300 mm Screw speed: max. 43 m/min. Drive motor: DC motor 25 kW Cylinder heating/cooling zones: 4/3 (oil cooling) inlet piece heating zone: 1 tool heating zones: 5 Equipment: dosing unit with hopper, vacuum pump for barrel degassing, barrel cooling unit, screw tempering unit Gearbox, was installed at 53,000 hrs. Overhauled worms and the cylinder Note: current running time is 62,590 hrs. Good Second hand functional

Condition: ready for operation (used), An old extruder with L. Pfeiffer motor is available. Motor power: 9kW, motor speed: 1485rpm, rated current: 15.1A. On-site inspection is possible. Debsv N Izvs Hlrtcekl

Condition: used, with 175mm Erwepa single screw extruder, gear pump, 2400mm die, 2400mm x 500mm rolls haul off in line knives. * 175mm primary extruder Erwepa Davis Standard 40 D vented with 350kw dc motor and drive. Temperature panel. Hydraulic lantern slide screen changer, Large 90/90 gear pump with gearbox and drive. Gravimetric Maguire 4 zone blender with hopper loaders. * 2400mm wide Reifenhauser 3 roll polishing stack with thermoregulation, haul off. 2400mmx500mm individual drives. Variable speed haul off. In line knives. Large pneumatic roll closing. * Upgraded pump group - 3 zone Dsb Hlrtsv Twnmecskl

Year of construction: 2011, Condition: excellent (used), Functionality: fully functional, - 10 heating-cooling zones -hydraulic screen changer 2.2 kw - without stopping the machine - 2 screw feeders 65 - magnetic grid separator - vacuum degassing - 90 kw extruder motor with adjustable speed - 2.2 kw material feeding motor - 2.2 kw blower - 2 kw vibrator motor Dkjb Hlrsv N N R Sstcjl - 4 kw granulator motor -productivity 100 - 130 kg / hour - automatic feeding

Year of construction: 1990, Condition: good (used), This haul-off machine, manufactured by Battenfeld Extrusionstechnik GmbH, is in the machine storage of Plastima Used Machinery. The machine, a model Haul-Off R630/6V, dates from the year 1990. Brand: Battenfeld Extrusionstechnik GmbH Model: Haul-Off R630/6V Year of manufacture: 1990 Voltage: 380 V Power: 4,5 kW Deb Hlrterrv Uwecokl Pipe diameter max: 110 mm to 630 mm

Year of construction: 2025, Condition: new, compounder with segmented screws, 25 mm - 32 l/d with atmosperic degassing, melt pressure sensor and die-plate die-face pelletizer made from stainless steel, housing is swivelling lenght of granules is adjustable by means of the cutting speed Deb Hlrtef Uc Uyjcjkl This compounder is built to order.

Year of construction: 2024, Condition: new, noris- Extruder MINI ESE 20/25 D Technical data Screw diameter [mm] 20 Screw length [L/D] 25 Screw speed [min-1] 20-200 min -1 Screw axial pressure [bar] 300 Continuous load 350 maximum Deb Hlrtjhx Elfjcekl Drive Three-phase drive with frequency converter Drive power [kW] max. 2.5 Reduction gear with integrated axial bearing Weight [kg] approx. 160 Dimensions [Lx Wx H] [mm] approx. 1050 x 600x 1590 *) Electrical connection values 3 / N / PE Supply voltage [V] 400 at 50 Hz Control voltage [V] 230 Temperature control electrical resistance heating bands in mica design. Max. processing temperature [°C] 300 Switch cabinet and control panel The electrical installation of the extruder is located in the machine base. The base contains all the necessary switching, control and display devices. The feed zone is water-cooled, the water connection is provided by the customer, a cooling unit for cooling the water is not included in the offer. Extruder tools are not part of the offer

Condition: good (used), Year of construction: 2006, machine/vehicle number: Serien Nr. 64019447, Used Coperion Werner and Pfleiderer ZSK 34 Mvc twin-screw extruder for sale. Dob Hlrtovcyk Necjkl The extruder was used for powder coatings

Year of construction: 2013, Condition: ready for operation (used), A complete Artec recycling and extrusion line is available. Material: PE/PP/PS/ABS/LDPE/HDPE/MDPE, screw diameter: 145mm, L/D ratio: 42, extrusion capacity: 700kg/h, degassing: 2-fold, shredder/extruder/screen changer output: 55kW/609kW/55kW. Total plant dimensions X/Y/Z: approx. 20700mm/3000mm/3400mm, control system: Siemens. Including shredder, conveying units, storage and mixing silo, feed belt, extruder, vacuum pump, melt filter, hot granulating cut-off, bag filling and weighing station and bagging station. Documentation available. On-site inspection is possible. Dkjb Hlev Ip S Hortcsl

Year of construction: 2014, Condition: ready for operation (used), A complete Artec recycling and extrusion line is available. Material: PE/PP/PS/ABS/LDPE/HDPE/MDPE, screw diameter: 125mm, L/D ratio: 42, extrusion capacity: 650kg/h, degassing: 2-fold, shredder/extruder/screen changer output: 55kW/512kW/55kW. Total plant dimensions X/Y/Z: approx. 20700mm/3000mm/3400mm, control system: Siemens. Including shredder, conveying units, storage and mixing silo, feed belt, extruder, vacuum pump, melt filter, hot granulating cut-off, bag filling and weighing station and bagging station. Documentation available. On-site inspection is possible. The system has extensively documented defects. Dobjv Ip Sys Hlrtcjkl