Used engraving machines for sale (125)

Condition: excellent (used), Here, we offer a laser marking system. Product features: Crsdpszdqpzefx Amaof Class 4 CO2 laser Micro-marking Wavelength: 10.6 microm, 0.417 mil Laser power, continuous wave: approx. 30 W Speed: 240 m/min or less Weight of marking head: 20 kg Weight of control unit: 12 kg Marking field size with process area cover: 0-55 mm or 0 - 2.2 inches Permitted ambient temperature: 0 - 40 degrees Celsius Permitted humidity: 35% - 85% Requires 90V to 132VAC, 180V to 264VAC, 50/60Hz Air-cooled Printing options: letters, numbers, katakana, hiragana, kanji, symbols, up to 50 user-defined characters, QR code, Micro QR code, Data Matrix, GS1 Data Matrix, and bar codes Type: LP-431-C Condition: used Scope of delivery: (See image) (Changes and errors in the technical data and specifications are subject to change!) We will gladly answer any further questions you may have over the phone.

Condition: excellent (used), Here, we offer a laser marking system. Product features: Class 4 CO2 laser Micro-marking Wavelength: 10.6 micrometers (0.417 mil) Laser power, continuous wave: approx. 30 W Weight of marking head: 20 kg Weight of control unit: 12 kg Marking field size with process chamber cover: 0-55 mm or 0-2.2 inches Permissible ambient temperature: 0-40 degrees Celsius Permissible humidity: 35% - 85% 100 V AC: 1,000 VA or less 200 V AC: 1,200 VA or less Air-cooled Codpezdqpnefx Amaerf Printing options: letters, numbers, katakana, hiragana, kanji, symbols, up to 50 user-defined characters, QR code, Micro QR code, Data Matrix, GS1 Data Matrix, and bar codes Type: LP-431U-C Condition: used Scope of delivery: (See image) (Changes and errors in the technical data and specifications are subject to change!) We will be happy to answer any further questions you may have over the phone.

Condition: excellent (used), Laser system with Laserline diode laser and Lascon controller Here we offer a Lascon laser system with Lascon controller LPC03. Laserline diode laser The diode laser ›LDM 500-60‹ has a wavelength of 935 nanometers and an output power of 550 watts. Laser type: LDM 500-60 Wavelength of 935 nanometers +-10% Laser power: 550 W Supply voltage 100-264V +- 10% Max. power consumption 1.7 kW Frequency 1 phase 47-63 Hz Type: LDM 500-60 Lascon Controller LPC03 The LPC03 offers the performance of a complete PC in a very small space. Instead of a hard drive, a replaceable flash disk has been installed. Due to the elimination of the hard drive and the extremely low heat generation, the LPC03 is ideally suited for tasks in the field of measuring, controlling and regulating in an industrial environment. The fiber-coupled MA pyrometers QP004 and EP004 can be easily integrated into the device. The fiber optic cable is then simply connected to the rear panel. The housing also offers space for the PCI card PCI-1P. In conjunction with the LASCON measuring and control system, the operating system and software are installed on the flash disk. Technical data: Motherboard: Half Size CPU card Slots: 1 x PCI, length max. 180mm Drives: none Storage medium: replaceable flash disk Connections: USB front; Ethernet, RS232, VGA, keypad, mouse, USB rear Housing: 212mm x 80mm x 250mm (Height x Width x Depth) Protection class: Front: IP40 Environment: 15°C - 40°C Type: LPC03 Crsdpfozdqkrsx Amaof Condition: used Scope of delivery: (See picture) (Changes and errors in the technical data, information are subject to change!) We will gladly answer any further questions you may have by telephone.

Condition: good (used), Trumpf Vectormark Type: VMc2 Trumpf Vectormark laser marker with Fuchs extraction and filtration unit Trumpf Vectormark GREEN 532nm Trumpf VMc2 Laser marker, with frequency-doubled diode-pumped Nd:YAG laser with Hurryscan 10 - galvanometer head from Scanlab Fuchs extraction and filtration unit TKFD The integrated pre-separator ensures high filter capacity Different filter stages are possible and can be perfectly adapted individually Ideal for confined spaces – can be placed under a table or integrated into machines Welding fume extraction class W3, IFA certified TKFD can also be transported in the trunk without modification Condition: used Codpfxozdqcue Amaerf Scope of delivery: (See image) (Changes and errors in the technical data are subject to change!) We would be happy to answer any further questions you may have by phone.

Condition: like new (used), Year of construction: 2020, functionality: fully functional, machine/vehicle number: S5-0925, Trotec SP500 Laser Cutter – Year of Manufacture 2020 – Professional Industrial Laser For sale, a well-maintained Trotec SP500 laser cutting and engraving machine from 2020. The machine is in very good condition, fully operational, and ready for immediate use in production. The Trotec SP500 is known for its high speed, accuracy, and reliability. Thanks to its large work area, this machine is suitable for both small batches and large-scale production. Specifications Brand: Trotec Model: SP500 Year of Manufacture: 2020 Work Area: 1245 × 710 mm Fully functional and can be inspected while powered on Always well-maintained Immediately available The machine is suitable for cutting and engraving materials such as: Acrylic (PMMA) Wood and plywood MDF Cardboard Leather Textiles Rubber Plastics Credpfx Amjzhldheaef Various other non-metallic materials Why choose this machine? Professional industrial quality High production speed Very accurate engravings and cuts Reliable machine with a long service life Ideal for sign makers, interior design, education, maker spaces, and production companies Inspection and demonstration are, of course, possible. The machine can be tested while running, so you can immediately assess its condition and performance. Transportation can be arranged upon request. For more information, additional photos, or a demonstration, please feel free to contact us.

Condition: excellent (used), Year of construction: 2001, Laser marking system Fab. Baublys Typ. BL 150 S/NC 500 Year 2001 Technical data Manufacturer: Baublys Type: BL 150 S/NC 500 Year of manufacture: 2001 Laser: 150 Watt Laser type Q-switch pulsed solid-state laser Laser medium Nd:YAG Wavelength 1064 nm Beam diameter approx. 1.2 - 1.3 mm after decoupling mirror at TEM00 Beam divergence 5 mrad TEM00 Pulse duration (time) CW / 90 ns Max. Output power 65 W multimode 16 W single mode Pulse energy 16 mJ at 3 kHz Beam deflection system Galvanometer system Line thickness with mixed mode approx. 0.12 mm Deflection speed 3 m/s; this corresponds to 200 characters/s at a height of 1.5 mm and a single-line font Dimension: approx. Weight: approx. Power supply Voltage 400 V, three-phase current 50 Hz, 3 phases, clockwise rotating field Connection 5-pin CEE plug 16 A 6h Max. Power consumption 8.5 kW, max. 16 A per phase Fuse protection 3 x 16 A slow-blow Water connection Cooling water flow rate 7.5 l/min at 20°C flow temperature Connection thread to be discharged G 3/4" external thread Heat quantity approx. 6.5 kW Max. Cooling water temperature at inlet 20°C Water consumption dependent on inlet temperature Outlet temperature < = 35°C Ambient conditions for transportation and storage Temperature +5°C to +40°C Humidity < 70% Installation site Observe transport instructions Ambient conditions for operation Codpfx Ajq Abnnsmasrf Temperature +10°C to +40°C Humidity < 70% Installation location Observe transport instructions All information without guarantee. A demonstration is possible at any time in our exhibition hall.

Condition: used, Year of construction: 2005, engraving field 120 x 120 mm table-size 250 x 250 mm workpiece weight max 50 kg Control Fobagraf machine weight ab. 1000 kg machine frame made of welded steel construction Cross slide, hard stone design, table top with steel stop iron Height-adjustable laser head Quality-switched ND: YAG laser head, lamp-pumped, 100 W Deflection unit mounted on the laser head (with standard lens) Z-axis with gearbox and servo drive Servo axis control with X-, Y-, and Z-axes Water-cooled Control: Fobagraf user software package Operating system: Windows 2000 operating hours: 17.388 h manual included Csdpfx Amsylcqheaerf

Condition: used, Laser TECHNIFOR TF410 Crsdpfox Tvhksx Amajf

Condition: used, Year of construction: 2020, operating hours: 300 h, functionality: fully functional, machine/vehicle number: MD-X1000C, Hybrid 3D Laser Marker, 13W, wavelength L=1064nm, ISO distance 189mm, marking area 125x125x42mm. Operating hours: approximately 300 hours (1 hour/week from April 2020 to April 2026), used only for R&D purposes, in excellent condition, no signs of wear. Sold WITHOUT enclosure (can be manufactured upon request). Sold with the following accessories: Marking Builder 3 (2D) software, ref. MB3-H2D4-DVD(X), Marking Builder 3D / Z-MAP creator software, ref. MB3-H3D1(X), Protective glass for MD-X series, ref. OP-87890, 34-pin sub-D25/3M connector, ref. OP-23139, 40-pin connector, ref. OP-22184, 3-pole CE cable, ref. OP-99037. New purchase price: €28,860 excluding VAT (2020). Cedpozgf E Nefx Amaerf

Condition: used, Year of construction: 2016, Trotec Speedy 100 R (30 Watt CO2) – Year of manufacture 2016 Offered for sale due to business closure. A reliable, professional Trotec Speedy 100 R with a 30W CeramiCore laser source. Ideal for engraving and cutting wood, acrylic, leather, and plastics. Condition: The machine starts up immediately, connects perfectly with JobControl, and engraves/cuts properly. Maintenance: The machine has been idle for some time and requires maintenance. The filters of the extraction system need to be replaced, and the axes/mirrors need to be realigned. The price has been adjusted accordingly. Operating hours: Due to a known display error (overflow bug) in JobControl, incorrect hours are currently being displayed. The official, encrypted Trotec Service Log file (9.1 MB) is available for serious buyers to demonstrate the machine's history. Specifications & Accessories: Working area: 610 x 305 mm Includes Trotec Atmos extraction system (filters need to be replaced) Credpfx Ajzd Utdsmasf Includes all original cables Location: Riemst / Vroenhoven area (Belgium), close to the Dutch border (Maastricht). Sale conditions: Sold in its current condition ("as is, where is"). Assistance with loading is available. A very competitive fixed price for quick buyers.

Condition: ready for operation (used), Year of construction: 2016, laser power: 200 W, Laser engraving machine manufactured in 2016. This Trotec SP500 C200 features a powerful 200W CO2 laser source and a generous working area of 1240 × 710 mm. With only 1,550 working hours, it remains in excellent condition and has been used solely for paper and cardboard cutting. If you are looking to get high-quality laser cutting and engraving capabilities, consider the Trotec SP500 C200 machine we have for sale. Contact us for further details. • Laser source: 200 W CO2 • Working area: 1240 × 710 mm • Working hours: 1,550 h • Condition: Excellent/mint • Ownership/usage: Single owner; used only for paper and cardboard • Integrated equipment/options: • JobControl Vision camera system • Autofocus system (high-precision electro-optical) • Laser pointer • Electronically controlled Z-axis • Air-assist with integrated compressor • Dust Protection Pack Technology • JobControl Expert software • Pass-through system • Tables: Honeycomb table; Slat cutting table; White acrylic + aluminum table • Optics: 2.0" precision lens + additional optics package (2.0", 2.5", 5.0") • Gas kit • Commercial info: • Machine under power; available for inspection and cutting tests • Location: Modena, Italy • Note: 24 months warranty originally included Additional equipment • Industrial water chiller Crodpezarzrofx Amajf • Professional mobile fume extraction system • H13 washable filter cartridges • Additional spare filter cartridge • Pneumatic pulse-cleaning system • 1.5 HP extraction fan motor • Double activated carbon filtration cell • Full package sale includes: Laser machine + chiller + professional fume extractor

Condition: used, Year of construction: 2019, Equipment: cabin, Trotec Rayjet 50 – CO₂ Laser System for Engraving & Cutting The Trotec Rayjet 50 is a compact and reliable CO₂ laser ideal for precise engraving and cutting applications. This system is an excellent choice for small businesses, workshops, educational institutions, and professionals seeking to enter laser processing. Currently, 2 units are available from stock. Manufacturer: Trotec Model: Rayjet 50 Year of manufacture: 10/2019 Technical specifications: Laser source: CO₂ laser Laser power: 30 W Working area: 500 × 300 mm Maximum material height: 145 mm Engraving speed: up to 2.0 m/s Codpfxjyhyu Ho Amaerf Positioning accuracy: 0.01 mm Resolution: up to 1,000 dpi Cooling system: Air-cooled Interface: USB / Ethernet Software: Compatible with standard graphic programs (e.g., CorelDRAW) Dimensions (W × D × H): approx. 870 × 670 × 430 mm Includes extraction system 8401 Atmos Cube All information provided without guarantee. Subject to prior sale.

Condition: used, x-280 ,y- 200 , Z 315 , Tischabmessungen 380x380/250x500 Sehr viele Schriftsaetze,wesentlich mehr als abgebildet Codpfxoddxb Nj Amaerf

Condition: used, Year of construction: 1993, Technical details: height of printing: - Cjdpsu Nu Tpjfx Amajrf height of printing: - connection electric: 100-240 V pneumatically operated: min./max.: 4,8/6,9 bar The printer is a lower case inkjet printer for contactless mark products. Application: for commercial marking and labeling purposes. The device can print on any surface, any structure, any profile and on any form. (according to the manufacturer) Equipped with two control units. other features: - dimension height: 3.3 - 8.6mm and 1/8 "- 1/3"; Points of reference: 62 digits; - operation is via control unit - equipment with control unit 170i and accessories Control unit 178i dimensions: - machine: L: 600 x W: 650 x H: 1800mm - control units: L: 203 x W: 508 x H: 610mm Sale as is. Without test run! i.D. *

Condition: used, Year of construction: 1996, Technical details: x-travel: 100 mm Cedpeu Nu Ugefx Amaerf y-travel: 100 mm z-travel: 300 mm Table dimensions: 350 x 300 mm air pressure: 6 bar voltage: 220 / 240 V weight of the machine approx.: 40 kg dimensions: L:475 x B:300 x H:700 mm Application for engraving and/or marking work on parts on both straight and curved surfaces. with manual height adjustment with handwheel, digital controls with control unit/device Technifor UC200; size 420x290x100mm (external control command) Foot pedal XPE-M Test plate/table size 350x300mm, cast steel, (slight scratches) pneumatic connections Note: the processing head (engraving unit) is not included in the scope of delivery. *

Condition: good (used), Year of construction: 1980, Engraving machine and copy milling machine Manufacturer DECKEL Type: GK 21, year approx. 1980 Maximum cutter diameter: 10 mm Spindle speeds 475 - 20,000 rpm Travel paths: 160 mm Y300 mm Z 365 mm Table: 200 mm X 360 mm Cedpfx Amjvk D A Ejasrf Machine cabinet with lots of accessories and machine documentation available. Weight: 620 kg.

Condition: new, Year of construction: 2026, functionality: fully functional, machine/vehicle number: GE-50RAY, shaft length: 1,064 mm, workpiece weight (max.): 20 kg, input voltage: 230 V, type of input current: AC, laser power: 50 W, type of cooling: air, total width: 530 mm, total height: 770 mm, total length: 796 mm, overall weight: 125 kg, warranty duration: 24 months, height adjustment type: electric, laser wavelength: 1,064 nm, Equipment: cabin, 50-Watt Fiber Laser with a 3-Year Warranty Your Advantages at a Glance ✅ New ✅ 3-Year Warranty ✅ German-language application software and operating manual ✅ Ready for immediate use – no programming knowledge required ✅ Service, support, and spare parts directly from Germany ✅ On-site or remote training Our Services Personal delivery and installation Setup and training on-site or via remote connection Ongoing technical support Fast service and spare parts supply from Germany Technical Data (model-dependent) Laser power: 50 watts Wavelength: 1064 nm Frequency range: 20–100 Hz Marking field: 150 x 150 mm (optional 50, 70, or 110 mm) Csdpfszcrbqex Amajrf Repeatability: ± 0.003 mm Engraving speed: up to 7000 mm/s Marking software: EZCAD German / English Pilot laser for preview Laser Class 1 Electric lifting column with motor control Max. component height: approx. 300 mm Connection: 230 V Air-cooled system Weight: approx. 170 kg Service life: over 100,000 operating hours Low maintenance and energy-efficient Included Laser head 150 x 150 mm CE declaration of conformity 3-year warranty German software Training and instruction Invoice with VAT shown Scope of delivery USB cable Power cable Stops USB stick with parameters German operating manual Foot pedal Laser safety glasses Application areas Ideal for: Texts and serial numbers Logos and graphics QR codes and DataMatrix codes Variable datasets Image engravings Metal engravings and commemorative inscriptions Plastics and coated materials Software EZCAD 2.14.0 (German) Supported file formats: *.DXF, *.PLT, *.AI, *.JPC, *.BMP, *.JPG, *.JPEG, *.GIF, *.TGA, *.PNG Shipping & Installation If shipped, we configure the machine via remote connection and provide training. Alternatively, we offer personal delivery, on-site installation, and training for your employees. Shipping costs will be agreed upon individually based on the postal code. Consultation We will gladly prepare an individual offer for you. Contact us today and learn more about the advantages of our fiber lasers. Also available as 100-watt and 200-watt versions! Secure this demonstration unit now before the new stock arrives.

Condition: new, Year of construction: 2026, functionality: fully functional, machine/vehicle number: FI-50-RAY-OF, shaft length: 200 mm, input voltage: 230 V, type of input current: DC, laser power: 50 W, type of cooling: air, working range: 200 mm, overall weight: 46 kg, warranty duration: 36 months, input frequency: 100 Hz, Available immediately! Buy now and benefit! Seize the opportunity and secure the 50 Watt Raycus QB. For further information or an individual offer, please do not hesitate to contact us. Contact us today and find out more about the benefits of this outstanding product. We offer you a brand new 50 watt Raycus fiber laser with German user software and operating instructions. This device is very easy to operate without any programming knowledge and is ready for immediate use. Our services: Personal delivery and installation Setup and instruction on site or via remote connection Ongoing support for questions or problems Credju Hrf Dspfx Amajf Service and spare parts directly from Germany Technical details: Laser power: 50 Watt Raycus Wavelength: 1064 nm Marking field size: 200x200 mm (options: 50, 70, 110, 150, 250, 300 mm head) Repeat accuracy: ± 0.003 mm Engraving speed: ≤ 7000 mm/s Marking software: EZCAD in German / English Pilot laser: simple preview Laser class: 4 Working temperature range: 14-30 ℃ Focusing: manual Max. Component height: approx. 350 mm Connection: 230V Cooling: air-cooled Weight: approx. 50 kg Operating costs: low Service life: over 100,000 operating hours maintenance-free Equipment: Grid holes for fixtures Variety of materials: Marking of a wide range of materials Included: Head 200x200 mm, other sizes available CE declaration of conformity guarantee service German software Training for machines and programs Invoice Scope of delivery: USB cable power cable Stops USB stick with parameters Operating instructions in German Monitor holder Foot pedal Safety goggles Applications: Perfectly suited for text, logos, vector data, QR codes, DMC codes, 2D codes, variable data sets and image engraving. This laser is ideal for engraving and tempering metals as well as marking or decorating plastics and coated materials. Software: EZCad 2.14.0 in German Compatible files: *.DXF, *.PLT, *.AI, *.JPC, *.BMP, *.JPG, *.JPEG, *.GIF, *.TGA, *.PNG Service: We carry out the service ourselves and have the largest spare parts in stock right here in Germany to guarantee you fast and efficient support. Shipping and installation: With shipping, we connect the machine to you remotely, set it up and give you brief instructions. Alternatively, we deliver it in person, install it, set it up and instruct you. The price is agreed depending on the zip code. Consultation: For detailed advice, visit our website or call us directly. We will be happy to answer all your questions.

Condition: used, Year of construction: 2026, functionality: fully functional, shaft length: 1,064 mm, workpiece weight (max.): 50 kg, input voltage: 115 V, type of input current: AC, laser power: 20 W, type of cooling: air, total width: 445 mm, total height: 938 mm, total length: 851 mm, overall weight: 65 kg, warranty duration: 24 months, height adjustment type: electric, travel distance X-axis: 70 mm, travel distance Y-axis: 70 mm, ambient temperature (min.): 15 °C, ambient temperature (max.): 35 °C, Equipment: cabin, The SpeedMarker 300 is a compact fiber laser marking system designed to deliver precise engraving on metals, plastics, and industrial materials with exceptional speed and reliability. Based on Trotec's proven galvo technology, this machine combines a 30W fiber laser source with intelligent autofocus and intuitive software integration to streamline your marking process. Whether you are marking stainless steel components, anodized aluminum, or technical plastics, the SpeedMarker 300 produces clean, permanent marks at production-level throughput. Perfect for manufacturers seeking consistent quality and small-to-medium-sized businesses expanding their engraving capabilities, this machine balances performance and affordability without compromising precision. Key features: The 30W fiber laser delivers high-speed marking on ferrous metals, stainless steel, and anodized surfaces in seconds per part, making it ideal for high-volume production environments where throughput directly impacts ROI. Integrated autofocus technology automatically adjusts for material height variations, eliminating manual focus adjustments and ensuring consistent mark depth across batch runs of varying components. The galvo-based optical system provides fast beam deflection and pinpoint accuracy, producing crisp, fine-detail marks with line widths as small as 0.1mm without sacrificing production speed. User-friendly software compatible with industry-standard formats (PDF, DXF, AI) allows operators to set up custom marking jobs in minutes, with real-time preview and mark simulation before production. Credpfx Aszcc Uzomaof The compact tabletop design, with optional integration into existing assembly lines or workstations, makes the SpeedMarker 300 an efficient choice for businesses with limited floor space seeking industrial-grade marking capabilities.

Condition: new, Year of construction: 2026, functionality: fully functional, workpiece weight (max.): 30 kg, input voltage: 115 V, type of input current: AC, laser power: 60 W, type of cooling: air, total width: 1,221 mm, total height: 1,066 mm, total length: 830 mm, warranty duration: 24 months, height adjustment type: electric, scan area length: 813 mm, scan area width: 508 mm, travel distance X-axis: 813 mm, travel distance Y-axis: 508 mm, travel distance Z-axis: 210 mm, input current: 8 A, laser wavelength: 10,600 nm, working height: 210 mm, opening width: 890 mm, space requirement length: 830 mm, ambient temperature (min.): 15 °C, ambient temperature (max.): 25 °C, working width: 813 mm, Equipment: cabin, The Trotec Speedy 360 is a high-performance CO₂ laser engraving and cutting system designed for professional production environments. With a working area of 813 × 508 mm and laser power options up to 120 W, it enables precise processing of a wide range of materials including wood, acrylic, plastics, textiles, and more. The system features high-speed engraving up to 3.55 m/s, a programmable Z-axis for flexible working heights up to 210 mm, and advanced technologies such as OptiMotion™, Sonar Technology™ autofocus, and Ruby® laser software. Its robust design, air-cooled laser source, and intelligent workflow integration ensure consistent quality, high productivity, and reliable operation in industrial, educational, and commercial applications. Csdpfx Amezcbycjasrf

Condition: new, Year of construction: 2026, functionality: fully functional, shaft length: 1,064 mm, workpiece weight (max.): 40 kg, input voltage: 110 V, laser power: 60 W, type of cooling: air, total width: 1,520 mm, total height: 1,115 mm, total length: 1,205 mm, overall weight: 275 kg, warranty duration: 24 months, travel distance X-axis: 875 mm, travel distance Y-axis: 580 mm, travel distance Z-axis: 225 mm, Reliable cutting and engraving quality is ensured by proven core technologies and a robust design, which minimize downtime and keep your production running smoothly. Cedpfozcazlox Amaorf A simple, efficient workflow with Ruby® Essential combines design, job preparation, and machine control into one connected platform for faster, clearer, and more intuitive operation. OptiMotion™ automation enables clean, fast cuts by dynamically adjusting speed and acceleration, saving setup time while consistently achieving high-quality results. Centralized system control and smart electronics provide real-time monitoring of the laser, exhaust system, filters, and temperature, increasing uptime and making operation easier, even for beginners. Flexible support options allow you to start with an attractive entry-level system and add premium Trotec training, service, and spare parts support whenever you need it.

Year of construction: 2007, condition: excellent (used), We offer a complete Laser marking machine: - DOMINO DSL1 laser Csdod N Hgujpfx Amasrf - Cabin according to protection class 1 - axis for rotation - conveyor belt - computer the tipe of laser: DOMINO DSL1 10-60 Laser power: 10 W. Lasertype: closed CO2 laser, 30000 hours medium failure-free time Characters per second: 400 (depending on the product material and system configuration) character height: 0,5 - 120 mm (0,02 - 119,89 mm) focal length: 100 mm (208 mm optional) labeling field: 60 x 60 mm Font: Pseudo-True Type laser head: construction made of stainless steel and aluminum operating temperatur: 15 - 38 C cooling: air Dynamark-Software The following materials can be marked by a CO2 laser: - Painted or coated metals - Glass - ceramics - Carton - Different types of plastic

Condition: ready for operation (used), Year of construction: 2018, laser power: 10 W, Laser engraving machine manufactured in 2018. This VIDEOJET VJ 7230 features a laser wavelength of 1064 nm and operates on a voltage range of 100 – 240 V. It includes an external touchscreen interface housed in stainless steel and comes with a Bofa Ad Oracle extraction system. If you are looking to get high-quality engraving capabilities, consider the VIDEOJET VJ 7230 machine we have for sale. Contact us for further details. - Units Available: 2- Laser Type: Laser Engraving System- Wavelength (WL): 1064 nm- Voltage: 100 – 240 V ~- Amperage: 0.9 – 1.7 A- Frequency: 50/60 Hz- Phase: 1 PH- Laser Class: Class 4 (Complies with 21 CFR 1040.10 and 1040.11)- Standards: CE, EAC, TÜV SÜD NRTL C/US- Included Accessories: Bofa Ad Oracle extraction system (Videojet branded)- Controller: External touchscreen interface in stainless steel housing Csdpfx Amey Snqneajrf

Condition: ready for operation (used), Year of construction: 2021, laser power: 10 W, Laser engraving machine manufactured in 2021. This VIDEOJET 7230 features a wavelength of 1064 nm and operates on a voltage range of 100 - 240 V. It includes essential components such as a laser head, laser source, and a touchscreen control panel. If you are looking to get high-quality laser engraving capabilities, consider the VIDEOJET 7230 machine we have for sale. Contact us for further details. Credoy Snn Tjpfx Amajf - Identity: Laser Engraving System- Wavelength (WL): 1064 nm- Voltage: 100 - 240 V ~- Amperage: 0.9 - 1.7 A- Frequency: 50/60 Hz- Phase: 1 PH - Laser Class: Class 4- Compliance: 21 CFR 1040.10, 1040.11, IEC/EN 60825-1:2014- Included Components: Laser head, Laser source, Touchscreen control panel, Videojet Bofa Ad Oracle extraction system

Condition: like new (used), functionality: fully functional, Year of construction: 2023, control type: CNC control, degree of automation: automatic, actuation type: electric, controller manufacturer: Trotec, year of last overhaul: 2026, Equipment: CE marking, documentation/manual, dust extraction, emergency stop, fume extraction, safety light barrier, SP3000 400 Watt CO2 • 2.210 x 3.210 mm working area Credpfjzaq Ikox Amaof • Laser pointer • Gas kit • InPack Technology™ • 2.5” lens, 5.0” lens • Software-controlled Z-axis • Active laser deflector shield • Air-cooled optics • Operator console without PC • Laser system complies with laser safety class 2 with integrated laser safety class 4 laser source • Traveling exhaust • Digital table exhaust system • Sonar Technology™ • Tandem operation • Standard PC for the operator console with mouse, keyboard, and 24” Full-HD monitor, Windows® 10 Multi-Language, JobControl® Expert pre-installed • Cooler for 400W/380V • Aluminum grid table SP3000 • Matching extractor for optimal results. 3-phase power supply Advantages of the Trotec SP 3000 Spacious working area: The SP 3000’s working area of 2,210 x 3,310 mm is designed for large sheet sizes. The working area is easily accessible from all four sides. The loading width is 2,500 mm, and it is open at the front and rear. The open design allows the system to be loaded from all sides, even during cutting. This makes daily work as productive as possible. Extremely fast cutting with the highest quality: Even at the highest speeds, up to 1 m/sec and 1g acceleration, the SP 3000 delivers the best cutting quality. The innovative drive concept, the precise linear guides, and the innovative drive concept testify to excellent construction, made in Austria. Air-cooled optics for optimal cutting quality: All optics are air-cooled with clean compressed air during laser processing. The optics are kept free from contamination that arises during laser processing. This guarantees maintenance-free operation and a long service life for these high-quality components. Fully enclosed beam path for 24/7 operation: The laser beam is protected along its entire path through the machine. Safe operation is guaranteed. The class 4 laser system can be used as safely as a class 2 system. No additional safety measures are required. Reliability through InPack Technology™ and Harsh Environment Protection: The core of Trotec’s unparalleled mechanical reliability is the fully dust-proof and maintenance-free axis system. Traveling exhaust package: The sophisticated airflow concept with extraction above and below the workpiece guarantees high-quality engraving and unparalleled cutting results. JobControl® software package: Much more than a standard printer driver. With JobControl software, you can optimize the use of your material and customize the workflow to your own needs. Service and support: Your direct connection to the manufacturer of your system guarantees the best service and availability of parts.