Condition: used, Dimensions (L x W x H): 1180 x 650 x 1980 mm Airflow rate: 565 m³/h Associated negative pressure: 2100 Pa Cedpfx Aqezn Uk Rsljrf Filter area: 4.1 m² Chip volume: 135 l Weight: 116 kg

Condition: used, Year of construction: 1990, Airflow rate: 1500 / 3000 m³/h Crjdpfx Aqjzgi R Ajlef Storage location: Nattheim

Condition: new, functionality: fully functional, Model: 22 Brand: PERFECT, Poland – CE certificate – warranty service TECHNICAL SPECIFICATIONS: Credpfxjw I Ey Rs Aqlsf – max. capacity: 20,000 m3/h – max. compressed air: 4,900 Pa – motor: 22 kW – rotation speed: 2,800 rpm – metal impeller: 6 blades – extraction port diameter: 325 mm – dimensions (L/W/H): 120 / 110 / 110 cm – weight: 400 kg Sheet thicknesses: – impeller blade: 5 mm – impeller disc: 6 mm – housing sides: 4 mm – housing shell: 4 mm

Condition: used, functionality: fully functional, type of input current: three-phase, TECHNICAL SPECIFICATIONS: - Engine: 50 kW - Capacity approx.: 30,000 m3/h - Motor speed: 2960 rpm - Impeller blade height: 230 mm - Impeller speed: 2350 RPM Csdpfjxyirmox Aqlerf - Number of blades: 8 - Inlet diameter: 500 mm - Outlet dimension: 480 x 380 mm - Overall dimensions (L/W/H): 240 x 150 x 150 cm - Weight: ~600 kg

Condition: new, functionality: fully functional, Year of construction: 2026, Advantages of DC Chip Extractors The purpose of the Vibra Motor shaking system is to ensure stable operating parameters and to monitor the proper functioning of the extractor. Codpfx Aqox Agpzolerf A heavy-duty design enhanced with a radial fan guarantees maximum vacuum efficiency. The extractor is intended for dry sawdust and wood chips. Thanks to the airtight construction, it is suitable for operation both outdoors and inside the facility. Adapted for operation in a positive-pressure system (fans work on the contaminated side of the dust collector) as well as in a negative-pressure system (fans work on the clean side of the dust collector). The sound-insulated design and specially shaped impeller blades contribute to quiet and efficient operation while minimizing electrical power consumption. A key advantage of the extractor is the use of flexible and durable seals in critical areas, improving the tightness of the entire system without heat loss at connection points. A multifunctional device with a modular system allowing any configuration of the extractor. Warm air recovery system. Control cabinet equipped with an intuitive control panel that allows monitoring of filter contamination levels. For filtering smaller particles, a filter such as HEPA should be used. It is forbidden to use this extractor in an explosive atmosphere. The extractor is not designed to work with wet material (e.g., wet sawdust). Industrial Chip and Sawdust Extractor DCV21750 Technical Specifications Motor Power: 25 HP / 400 V, 50 Hz Extraction Capacity: 21,750 m³/h Inlet/Outlet Diameter: 400 / 400 mm Suction Speed: 28 m/s Number of Filters: 2 × 48 Number of Waste Bags: 8 Dimensions (L × W × H): 4600 × 1700 × 3500 mm Weight: 1400 kg SPECIAL OFFER!!! LAST UNIT IN STOCK!

Condition: new, Year of construction: 2026, DCV7500E Industrial Dust Collector The DCV7500E is a premium-class industrial dust collector engineered for demanding manufacturing environments. Its robust construction, exceptionally high extraction capacity, and advanced filtration capabilities make it the ideal solution for large woodworking facilities requiring clean air, reliable performance, and continuous-duty operation. Key Features High extraction capacity of 7,500 m³/h, ideal for operating multiple machines simultaneously Large 18 m² filtration area for efficient capture of fine dust particles Crodpfx Aqovzqtxelof 35 polyester filter cartridges with 5-micron filtration for improved air quality throughout the production facility Heavy-duty steel construction designed to withstand vibration and intensive industrial use Dynamically balanced metal impeller ensures smooth, quiet, and reliable operation Construction and Technology The DCV7500E is equipped with a Ø280 mm inlet port, providing exceptionally high airflow capacity for centralized dust extraction systems. Its metal impeller features aerodynamically optimized blades that maximize extraction performance while reducing noise levels. The airtight extraction system minimizes air leakage and efficiently separates wood chips, shavings, and fine dust particles, ensuring high operating efficiency. Performance and Efficiency Operating at an air intake velocity of 28–32 m/s, the DCV7500E delivers highly effective dust extraction even under fluctuating production loads. Powered by a 5.5 kW motor running at 3,000 rpm, the unit maintains consistent suction performance throughout continuous operation, regardless of the number of connected machines. Applications The DCV7500E is ideally suited as a centralized dust extraction system for woodworking factories and industrial production facilities operating equipment such as: Belt sanders and wide belt sanders Sliding table saws and panel saws Spindle moulders Edge banders and planers Automated woodworking production lines The unit is not intended for extracting wet materials or for use in hazardous or potentially explosive environments. Standard Equipment 35 polyester filter cartridges (5-micron filtration) Ø280 mm inlet port Sealed waste collection containers Optional Equipment HEPA filter for capturing ultra-fine dust particles Automatic filter cleaning system Overhead ducting system for centralized installation Technical Specifications Specification Value Motor Power 5.5 kW / 400 V Motor Speed 3,000 rpm Airflow Capacity 7,500 m³/h Maximum Vacuum Pressure 3,000 Pa Noise Level 80 dB Inlet Diameter Ø280 mm Air Intake Velocity 28–32 m/s Total Filtration Area 18 m² Filter Material Polyester, 5 microns, Filter Class "G" Number of Filters 35 Overall Dimensions 2800 × 970 × 2260 mm Weight 306 kg

Condition: new, Year of construction: 2026, DCV4500E Industrial Dust Collector The DCV4500E is a high-performance industrial dust collector designed for continuous operation in high-dust environments. This advanced extraction system meets the demands of manufacturing facilities where efficient removal of dust and wood chips is essential for maintaining product quality and workplace safety. Its compact housing, robust construction, and impressive extraction capacity of 4,500 m³/h make it an ideal solution for woodworking shops, furniture manufacturers, and production lines requiring a centralized dust extraction system. Key Features Smooth and quiet operation thanks to a dynamically balanced metal impeller High dust extraction efficiency with an air intake velocity of up to 32 m/s 12 polyester filter cartridges with filtration efficiency down to 5 microns Suitable for connecting multiple machines in an overhead centralized extraction system Energy-efficient fan with optimized airflow design Airtight construction minimizes dust emissions into the working environment Easy operation and maintenance with a quick waste bag replacement system Construction and Technology The DCV4500E features a reinforced steel frame that minimizes vibration and ensures quiet operation. The extraction system is equipped with a Ø200 mm inlet port, providing high airflow capacity and an extended extraction range. The 12 filter cartridges deliver efficient filtration of dust and wood chips, while the engineered design helps reduce heat loss within the production facility. Performance and Efficiency Thanks to its optimized fan design and 3.0 kW (S1) motor, the DCV4500E delivers high extraction performance while maintaining low energy consumption. The system is designed for continuous-duty operation and provides consistent suction power throughout the entire working cycle. It is an excellent solution for operating multiple woodworking machines simultaneously within a centralized dust collection system. Applications Credpfsuc Uchex Aqlef The DCV4500E is suitable for use in: Woodworking workshops Furniture manufacturing facilities Production of doors, windows, and wooden components Manufacturing lines with multiple connected machines The unit is compatible with machines such as sanders, edge banders, panel saws, and sliding table saws. It is not recommended for extracting wet materials or for use in hazardous or potentially explosive environments. Standard Equipment 12 polyester filter cartridges (5-micron filtration) 2 waste collection bags Ø200 mm metal inlet port Optional Equipment HEPA filter for particles smaller than 1 micron Ø200 mm extraction hose Ceiling-mounted suspension system for overhead installation Technical Specifications Specification Value Motor Power (S1) 3.0 kW / 400 V, 50 Hz Motor Speed 2,900 rpm Airflow Capacity 4,500 m³/h Maximum Vacuum Pressure 3,000 Pa Noise Level 80 dB Air Intake Velocity 28–32 m/s Inlet Diameter Ø200 mm Number of Filters 12 Filter Material Polyester, 5 microns, Filter Class "G" Filter Dimensions 170 × 1035 mm Overall Dimensions 1530 × 665 × 2200 mm Weight 120 kg

Condition: new, Year of construction: 2025, DCV6000E Industrial Dust Collector Csdsuc U Nbjpfx Aqlerf The DCV6000E is an advanced industrial dust collector designed for the efficient extraction of wood chips, shavings, and dust from multiple workstations simultaneously. Engineered for continuous, heavy-duty operation in manufacturing environments, it delivers consistent suction performance and maintains excellent air quality throughout the production facility. Its reinforced construction and dynamically balanced impeller ensure quiet, reliable, and low-maintenance operation. Key Features Exceptional extraction capacity of 6,000 m³/h, ideal for operating multiple machines simultaneously Ø250 mm inlet port providing high airflow capacity and compatibility with centralized dust extraction systems 28 polyester filter cartridges with 5-micron filtration and a total filtration area of 14 m² Ceiling-mounted design for space-saving installation and easy system expansion Sealed waste bag replacement system for clean and convenient maintenance Energy-efficient operation thanks to an optimized fan blade design and a highly airtight extraction system Construction and Technology The DCV6000E is built with a heavy-duty hardened steel housing designed to withstand deformation and minimize vibration. At the core of the system is a dynamically balanced metal impeller, reducing noise while ensuring stable operation under high airflow conditions. The large-surface polyester filter cartridges effectively capture dust particles as small as 5 microns. An optional HEPA filtration system is available for applications requiring the highest air quality standards. Performance and Efficiency Powered by a 3.8 kW (S1) motor operating at 3,000 rpm, the DCV6000E achieves an air intake velocity of 28–32 m/s. This enables efficient dust extraction for multi-machine woodworking lines and automated production systems, regardless of workload intensity. The unit is designed for continuous-duty operation, maintaining stable performance throughout extended production cycles. Applications The DCV6000E is ideally suited for furniture manufacturing plants, industrial woodworking facilities, CNC production lines, and other environments where large volumes of wood dust are generated. The unit is compatible with: Sliding table saws and panel saws Wide belt sanders Edge banders and planers CNC woodworking machines Standard Equipment 28 polyester filter cartridges (5-micron filtration) Galvanized steel housing Metal impeller and extraction chamber Sealed waste collection bags Optional Equipment HEPA filter Extraction hoses and system manifolds Waste container fill level sensors Technical Specifications Specification Value Motor Power (S1) 3.8 kW / 400 V, 50 Hz Motor Speed 3,000 rpm Airflow Capacity 6,000 m³/h Maximum Vacuum Pressure 3,000 Pa Noise Level 80 dB Inlet Diameter Ø250 mm Air Intake Velocity 28–32 m/s Total Filtration Area 14 m² Number of Filters 28 Filter Material Polyester, 5 microns, Filter Class "G" Overall Dimensions (L × W × H) 2000 × 625 × 2150 mm Weight 262 kg

Condition: ready for operation (used), Year of construction: 2000, machine/vehicle number: 2407001, functionality: fully functional, operating hours: 1,000 h, power: 4 kW (5.44 HP), filter area: 10.5 m², noise level: 75 dB, total height: 1,735 mm, total length: 1,580 mm, total width: 550 mm, overall weight: 182 kg, nominal flow rate: 460 m³/h, negative pressure: 240 Pa, The unit was designed and installed as a single-station extraction system for a workshop area. It has hardly been used in the past 10 years, as the workshop concept has changed. The system is currently powered and can be inspected. Dismantling and collection must be carried out independently. Upon purchase agreement, the electrical connections will be disconnected from the central control cabinet. All system and installation documentation is available. Crsdpfeyf Az Tex Aqljf

Condition: used, Dust suction hood 300 mm Air consumption 7950 m³/h Motor output 11 kW Second-hand machine Crodpozn Aibefx Aqlsf Features and technical specifications: - Motor: 11 kW - 1,455 rpm - Extraction nozzle diameter 300 mm - Airflow 7,950 m³/h - approx. 2,900 Pa - with V-belt drive - with steel impeller Availability: at short notice Storage location: Röllbach

Condition: used, Year of construction: 2022, Design of intake nozzle: left Diameter of intake nozzle: 200 mm Nominal volume flow: 2260 m³/h Maximum volume flow: 3400 m³/h Filter area: 12 m² Cleaning: vibrating motor Chip disposal: 2 collection containers Collection volume: 350 liters Filter material: polyester needle felt Negative pressure at nominal volume flow: 3500 Pa Negative pressure at maximum volume flow: 2700 Pa Installation: mobile Crjdozqvcgjpfx Aqljf Weight approx.: 410 kg Motor power: 4 kW Power connection approx.: 400 Volt/50 Hz Location: Rieth

Condition: excellent (used), Catalog number 8054 TECHNICAL DATA Crjdpfx Aqeznkynjlef - max. capacity approx. 8800 m³/h - motor 7.5 kW - metal impeller with 6 blades - inlet diameter 360 mm - outlet diameter 240 mm - dimensions (L/W/H) 1400x1200x1100 mm - weight 270 kg ADVANTAGES – motor power 7.5 kW – used fan, very good condition Net price: 3500 PLN Net price: 833 EUR, depending on the exchange rate of 4.20 EUR (Prices are subject to change due to significant fluctuations)

Condition: good (used), Code: 0306 Brand: VM Model: 2/18 Suction system with 18 sleeves and 2 collection bags for carpentry workshops, furniture factories, sawmills, woodworking shops and various Technical data: N° 18 filtering sleeves Codpoymfiiofx Aqlorf N° 2 collection bags Motor Hp 7,5 Electrical panel Overall dimensions: mm 2800 x 1200 x 3200 h

Condition: used, Year of construction: 1998, Used dedusting unit Year of manufacture: 1998 Note: The unit does not have a fire extinguishing system! Equipment and technical data: - Volume flow: 3,530 m³/h - Suction nozzle: 250 mm - Filter surface area: 25.2 m² - Number of collection containers: 3 - Negative pressure: 2,500 Pa - Collection container volume: 480 l - Motor: 5.5 kW - Automatic cleaning - Filter category: H2 - CE marking: Yes Csdpfx Asznfpqeqljrf Weight: 740 kg Availability: short notice Location: Flörsheim

Condition: new, 3 waste bags capacity 8000 m3/h motor power 7.5 kW bag shaking mechanism air return channel power supply 380V Crodpfx Aqozqa Tiolof

Condition: reconditioned (used), Year of construction: 1994, machine/vehicle number: 941108, functionality: fully functional, total height: 2,520 mm, total length: 2,580 mm, total width: 1,000 mm, Compact dust extraction system with 3 chip collection bags – WITHOUT fan Nominal air flow rate: 5000 m³/h with existing fan – up to 7500 m³/h possible Filter area: 37.5 m² Filtration technology: AL-KO Opti-Jet system consisting of compressed air cleaning (sequence-controlled) and surface filtration Chip collection capacity: 8 solenoid valves Credpfx Aqszqan Holsf Suction nozzle: DN 355 mm Compressed air connection: 1", compressed air, water and oil-free Minimum compressed air consumption 8.5 bar: 1140 NL/cleaning cycle Operating pressure: maximum 8.5 bar Fire extinguisher connection: 1 x 1 1/2" Dimensions WxD approx: 2572 x 981 mm Height approx: 2520 mm Weight without filter approx: 457 kg JET cleaning: A pressure surge on the inside of the filter achieves effective cleaning of the filter hoses on the outside. Easy maintenance: large access doors facilitate filter maintenance, additional inspection covers High-quality filter material: oil and water-repellent surface coating of the filter, for problematic dusts (paint sanding dust, wet dust), filter washable Uniform bag filling: infinitely adjustable distribution flaps enable uniform bag filling Suitable fan: see item no. 7458 D=250 mm - 5000 m³/h extraction capacity With a fan D=350 mm, up to 7500 m³/h extraction capacity is possible!!!

Condition: good (used), Year of construction: 2000, Dimensions (L/W/H) 2300 x 700 x 1300 mm Air consumption 3500 m³/h Motor output 1,5 kW Credpfxsxr Rbms Aqljf weight of the machine ca. 150 kg

Condition: new, Year of construction: 2026, Capacity ~ 15,000 m³/h Motor power 15 kW / 20 HP (optional: 18 kW motor) Filter surface area 57.9 m² Exhaust port diameter 400 mm Voltage 400 V Filter material polyester Filter permeability 3 microns Filter dimensions Ø152 x 1120 mm Number of filters 108 Dimensions (L x W x H) 4147.5 x 1129 x 2480 mm Crsdpfjx D Ah Nox Aqljf Weight 870 kg Scope of delivery: Polyester filter, 3 microns 5 containers 3 chimneys Filter cleaning using a vibration system with control The automatic vibration filter cloth cleaning system allows for continuous monitoring of filter operation during breaks and during operation. The filters used are classified as "G" filtration category, which allows for air purification up to 0.2 mg/m3/h (H2).

Condition: new, Year of construction: 2026, The manufacturer guarantees the cleaning quality The system of automatic vibrating cleaning of the filter cloth - during breaks and during filter operation, it allows for constant monitoring of the correct operation. Technical specifications: • Conforms to H-2 standard • Extraction capacity ~ 4500 m3/h • Motor power 3.0 kW • Speed 3000 rpm • Voltage 400V, 50Hz • Suction connection 200 mm • Polyester filter material, 5 microns • Filter surface 8.8 m2 • Speed 28 m/sec. • Number of filters 18 • Dimensions 752 x 1502 x 2144 mm • Weight 180 kg • Category of filters G • Polyester filter material • Noise 80 dB without connection, 65 dB when connected to the machine via pipe Crodpjgyfmasfx Aqlof Delivery set: - 5 micron polyester filter - 1 container - Running gear - Filter cleaning using a controlled vibration system - Fire extinguisher - Fulfill H-2 Norms + 850 euros for the model with fire extinguisher (Safe System)

Condition: used, Year of construction: 1997, Product: HÖCKER VACUMOBIL EA 250 Motor: 5.5 kW Cedpfx Aoxbf Rbeqlsrf Extraction capacity: 4200 m³/h Cylinder filter: 96 units (length: 1250 mm, diameter: 80 mm)

Condition: like new (used), Year of construction: 2019, Vacomat 350 XP TWIN Csdpfx Aqezp Edwelorf The Vacomat 350 XP TWIN is a high-performance dust extraction unit and a true energy-saving marvel among mobile dust extractors. Two frequency-controlled motors (5.5 kW each) ensure that the suction power is adjusted accordingly, especially under highly variable operating conditions. This ensures that only the energy that is actually needed is consumed. This dust extractor handles air volumes of up to 10,000 m³/h and is ideally suited for extracting dust from large CNC machines or entire machining centers. The innovative and highly intelligent control system automates the extraction process in conjunction with the connected machines. Extraction starts automatically as soon as a connected machining center is switched on. If the power requirement is lower, only one fan is started. As soon as several extraction points are in operation, the second fan is automatically switched on. As standard, the filter sleeves are cleaned automatically during operating breaks, as soon as all connected machining centers are switched off. Our patented filter shaking system then ensures gentle cleaning via a pneumatic/mechanical process using a compressed air connection (inlet pressure 6 bar, air consumption per cleaning cycle approx. 11 l). Optionally, and particularly recommended for very high and extremely fine dust concentrations, such as gypsum dust, an efficient pressure pulse cleaning system is available. The cleaning process via the compressed air tank takes place offline, after the extraction operation (NOTE: height then +100 mm and length +350 mm). Our Vacomats are manufactured using a modular system. As standard, the dust and chip mixture is discharged into four dust-tight chip collection containers (4 x 120 l) with durable plastic liners. A negative pressure channel securely holds the foil bags in the collection container. Viewing windows make it easy to check the fill level. Low energy consumption thanks to a modern, high-efficiency motor (IE3) "Made in Germany" and a flow-optimized internal housing with low air resistance. Heat recovery through a recirculation system: The warm exhaust air is filtered and fed back into the workshop. Low noise level: A double-walled filter sleeve housing absorbs the extraction noise directly inside the Vacomat. In addition, the fan housing is soundproof. Approved for indoor installation in the wood dust area - manufactured according to the new DIN EN 16770 standard. Healthy return air: High-quality, specially developed filter materials made of antistatic polyester needle felt filter out 99.9% of dust and chip waste from the air (dust class M for St 1 dust, according to TRGS 553). Increased safety through fire and explosion protection measures according to DIN EN 16770: pressure pulse tested up to 20,000 Pa, automatically activated powder extinguishing system - no water damage! Operational reliability: A pressure gauge continuously monitors the extraction performance. Error messages are displayed by the signal light. Low follow-up costs due to high-quality components and long service life of the filter medium: For example, an extra-large settling chamber ensures an initial separation of coarse chip waste. This prevents the filter sleeves from being additionally loaded with material. Low maintenance effort thanks to the maintenance unit on the motor console and easy access to the inside of the filter. All specifications according to the manufacturer.

Condition: used, Year of construction: 2026, functionality: limited functionality, The CORMAK FM500 Dust Collector is a heavy-duty industrial dust extraction system designed for intensive use in large woodworking shops, furniture manufacturing plants, and production facilities. With an impressive 5,000 m³/h airflow capacity, a robust steel construction, and the ability to connect up to four woodworking machines simultaneously, the FM500 delivers reliable, continuous dust extraction while maintaining a clean, safe, and efficient working environment. Codpfx Aqow S Hn Dslerf Key Features 2.8 kW (S1) three-phase motor / 400 V – designed for continuous industrial operation. Airflow capacity of 5,000 m³/h – efficiently extracts sawdust, wood chips, and fine dust from up to four machines at the same time. Vacuum pressure up to 2,500 Pa – provides consistent suction performance, even under heavy dust loads. High-efficiency metal impeller – dynamically balanced for smooth, low-vibration, and quiet operation. Quick-release collection bag system – allows fast and tool-free bag replacement. Large 480 L waste collection capacity – minimizes downtime by reducing the frequency of bag emptying. Multi-port inlet manifold (Ø200 mm / 4 × Ø100 mm) – compatible with multiple woodworking machines. Mobile wheeled base – enables easy movement around workshops and production facilities. Construction and Technology The FM500 is built around a heavy-duty steel frame that ensures durability and long-term stability. A large-diameter, high-performance fan operating at 2,950 rpm generates an air velocity of up to 31 m/s, delivering powerful and consistent extraction performance. The machine is equipped with woven fabric filter bags (Class II filtration) capable of capturing dust particles as small as 5 microns, helping maintain clean air in the workplace while supporting compliance with occupational health and safety standards. Performance and Efficiency The CORMAK FM500 woodworking dust collector maintains stable suction power during prolonged operation, making it suitable for continuous production environments. It can effectively serve up to four workstations simultaneously without compromising extraction performance. The large filter surface area and high-capacity collection bags reduce maintenance intervals and maximize productivity. Applications The FM500 is ideal for: Woodworking and furniture manufacturing workshops Timber processing and panel production facilities Technical schools and vocational training centres with multiple workstations Production lines requiring centralized dust extraction systems Standard Equipment Two fabric filter bags Two waste collection bags Inlet manifold (4 × Ø100 mm + 1 × Ø200 mm) Mobile base with heavy-duty wheels Optional Equipment Cartridge filter (2-micron filtration) Flexible extraction hoses (Ø100 mm / Ø200 mm) Galvanized hose clamps Technical Specifications Specification Value Motor power (S1) 2.8 kW Power supply 3-phase, 400 V / 50 Hz Motor speed 2,950 rpm Airflow capacity 5,000 m³/h Maximum vacuum pressure Up to 2,500 Pa Air velocity Up to 31 m/s Filter bags Woven fabric (Class II filtration) Waste collection capacity 480 L Inlet connections 1 × Ø200 mm / 4 × Ø100 mm Overall dimensions (L × W × H) 1,525 × 560 × 2,460 mm Weight 64 kg PLEASE NOTE!!! This machine is a return item; the casing is dented, but it is in working order. NO WARRANTY AND NO RETURNS!!

Condition: excellent (used), For sale is a powerful, industrial radial fan from the renowned Italian brand Euroventilatori International S.p.A. This machine stands out for its high-quality construction and ATEX certification, meaning it is suitable for use in potentially explosive environments (e.g., dust extraction in woodworking plants, paint shops, or the chemical industry). ⚙️ TECHNICAL DATA AND SPECIFICATIONS: Manufacturer: Euroventilatori International S.p.A. (Italy) Fan Type: TH 1002/A LG315 ES4 Year of Manufacture: 2010 Serial Number: X100638 Motor Power: 37 kW Motor Type: 225S (4 poles / 50 Hz) Fan Speed: 1470 rpm ATEX Certificate: CE Ex II 3D c T125 (compliant with directive 94/9/EC) Permissible fluid temperature: from 15°C to 80°C Permissible ambient temperature: from -15°C to 40°C Reference documentation: SAXN1010 🛠️ ADVANTAGES AND APPLICATIONS: Operational Safety (ATEX): The fan meets stringent explosion-proof standards for dust zones (3D). Ideal for extensive dust extraction systems, silos, and filters where there is a risk of dust ignition (e.g., wood dust). High Performance: A 37 kW motor guarantees enormous suction and discharge force, allowing it to handle entire production lines or extensive ventilation systems. Italian Reliability: Euroventilatori is one of the leading European manufacturers of industrial fans, guaranteeing a robust construction and long-lasting, trouble-free continuous operation. Credpozp Alfsfx Aqljf Durability: Designed for the transport of dusty air in harsh industrial conditions. 📍 ADDITIONAL INFORMATION: Condition: Used, fully functional. The machine is ready to be implemented in a demanding production environment.

Condition: used, Year of construction: 2026, The CORMAK FM230 Dust Collector is a professional dust extraction system designed for small and medium-sized woodworking workshops. Featuring a compact design, 1,000 m³/h airflow capacity, and a standard 230 V power supply, it efficiently removes sawdust, wood chips, and fine dust without requiring costly electrical upgrades. Equipped with a durable WhirlWind metal impeller and a mobile wheeled base, the FM230 combines reliable performance with high build quality for everyday workshop use. Key Features High extraction capacity of 1,000 m³/h – effectively removes sawdust, chips, and dust from woodworking machines. Standard 230 V power supply – plugs into a conventional mains outlet without electrical modifications. WhirlWind metal impeller – provides stable operation, excellent durability, and resistance to heavy workloads. Mobile wheeled base – allows easy movement around the workshop using robust bearing-mounted wheels. Sealed filtration system – efficiently separates dust particles, helping maintain cleaner workshop air. Ø100 mm extraction inlet – compatible with most woodworking machines and extraction hose systems. Construction and Technology The FM230 is equipped with a multi-blade steel impeller engineered for high airflow performance while maintaining relatively low operating noise. The machine is mounted on a sturdy mobile frame, making it easy to reposition even in confined workshop spaces. The dust collector features two heavy-duty bags—a filter bag and a collection bag—manufactured from durable materials that provide excellent airflow while maintaining effective filtration. A quick-release clamping system allows fast bag removal and replacement without the need for tools. Performance and Efficiency The CORMAK FM230 woodworking dust collector is highly effective at extracting dust directly from machines such as: Panel saws Surface planers Cjdpfx Aqozpx A Hjlerf Thickness planers Spindle moulders Tenoning machines With an airflow capacity of 1,000 m³/h, the FM230 maintains a clean working environment even during intensive woodworking operations. Weighing just 27 kg, its compact footprint makes it an excellent choice for workshops where space is limited. Applications The FM230 is ideal for: Professional and hobby woodworking workshops Joinery and furniture production Cutting, routing, planing, and sanding wood-based materials Machines equipped with Ø100 mm extraction ports Mobile workstations requiring a portable dust extraction solution Standard Equipment Fabric filter bag Waste collection bag WhirlWind metal impeller Mobile base with wheels Bag mounting clamps Optional Equipment Flexible Ø100 mm extraction hoses Y-connectors and reducers for multiple machine connections High-efficiency filter bags Noise reduction silencers Technical Specifications Specification Value Motor power 0.75 kW Airflow capacity 1,000 m³/h Maximum vacuum pressure 1,020 Pa Noise level 70 dB Collection bag capacity 60 L Number of bags 2 Extraction inlet diameter Ø100 mm Height 1,500 mm Width 420 mm Length 600 mm Power supply 230 V / 50 Hz Weight 27 kg IMPORTANT NOTICE!!! This machine is a customer return. BAGS ARE NOT INCLUDED. NO WARRANTY.

Condition: used, Year of construction: 2026, functionality: fully functional, The CORMAK FM230DBK Dust Collector is a professional dust extraction unit designed for the efficient removal of sawdust, wood chips, and dust generated during the machining of wood, metal, and plastics. With its compact design, high suction pressure, and 1,000 m³/h airflow capacity, it is an ideal solution for woodworking shops, technical schools, and craft workshops. Its lightweight construction, quiet operation, and excellent mobility make it a practical and efficient dust collector for users seeking reliable performance in a compact package. Key Features 1,000 m³/h airflow capacity – efficiently removes sawdust, chips, and dust from a single workstation. 0.75 kW motor powered by 230 V – operates from a standard mains outlet without requiring electrical modifications. Ø230 mm metal impeller – dynamically balanced for smooth, quiet operation and long service life. Vacuum pressure up to 1,030 Pa – delivers powerful suction, even when handling heavy or damp wood chips. Adjustable Ø100 mm extraction inlet – compatible with a wide range of woodworking and industrial machines. Mobile wheeled base – allows the unit to be moved easily between workstations. 56 L collection bag – reduces the frequency of emptying and supports uninterrupted operation. Low noise level (approx. 70 dB) – provides comfortable operation in enclosed workshop environments. Construction and Technology The CORMAK FM230DBK woodworking dust collector is built around a proven impeller-based extraction system. Its 230 mm dynamically balanced metal fan operates at high speed to generate stable suction, ensuring efficient removal of dust and chips directly from woodworking machinery. The 56 L textile collection bag is mounted on a sturdy steel frame for quick removal and replacement, helping maintain continuous productivity. The entire unit is installed on a mobile base with four wheels, making it easy to reposition even in confined workshop spaces. Crjdjzpxz Aspfx Aqlsf The adjustable Ø100 mm extraction inlet allows simple connection to a variety of machines with different dust extraction configurations. Performance and Efficiency The FM230DBK combines powerful extraction performance with quiet, energy-efficient operation. Its large-diameter metal impeller and high static pressure significantly reduce the risk of clogging, while the 1,030 Pa vacuum pressure effectively captures heavier particles and larger wood chips. Thanks to its relatively low operating noise, the unit is well suited for enclosed workshops where maintaining a comfortable working environment is important. Standard Equipment Mobile wheeled base Heavy-duty steel support frame Flexible extraction hose with nozzle 56 L textile collection bag Adjustable Ø100 mm extraction inlet Optional Equipment High-efficiency filter bags Multi-point extraction manifolds Antistatic Ø100 mm flexible hoses Reducers and adapters for non-standard machine connections Technical Specifications Specification Value Motor power 0.75 kW Power supply 230 V / 50 Hz Airflow capacity 1,000 m³/h Maximum vacuum pressure 1,030 Pa Impeller diameter Ø230 mm Extraction inlet diameter Ø100 mm Collection bag capacity 56 L Noise level Approx. 70 dB Overall dimensions 1,100 × 500 × 1,300 mm Weight 21 kg IMPORTANT NOTICE: This machine is a customer return. It is used and fully operational. NO WARRANTY. NO RETURNS.