Used Dividing heads for sale (105)

Condition: good (used), rotary table, rotary indexing table, dividing head, dividing head -Dividing head:Dividing head with three-jaw chuck -Type: unfortunately without type designation -Three-jaw chuck: Ø 137 x 70 mm, inner Ø 37 mm -Spindle bore: Ø 25 mm -Dimensions total: 510/480/H250 mm Crj Iewc Sgzsa T T Skob -Weight: 69 kg

Condition: as good as new (ex-display), centre height 130 mm spindle bore 18 mm ratio 40:1 swivellable - 10° bis 90° ° groove width 16 / 18 mm weight 35 kg dimensions of the machine ca. 0,5 x 0,25 x 0,25 m Unused semi-universal dividing set: - Spindle in precision tapered roller bearings - Phosphor bronze worm wheel, helix Cr-NI steel, hardened and ground - Translation disengageable for direct sharing - each division 2 to 50 and many divisions to 380 accessories: Tailstock, 2 part washers, centering point, driver and chuck flange Cs Ia T T Ssuvd Axskorb Machine dealer with own stock of 1600 m².

Condition: as good as new (ex-display), Year of construction: 2022, machine/vehicle number: 0815, Compact large precision CNC rotary table with control unit, suitable for single part or small series production in mechanical engineering, horizontal or vertical assembly is possible. Immediately available - Made in Germany - The dividing head is particularly suitable as 4th axis on engraving and milling machines for milling, engraving, lasering, drilling, grooving or for use on a tool or surface grinding machine. Square, hexagonal, gear milling of any pitch or 3D machining is possible. Extremely precise and accurate worm gear is designed with a maximum reduction ratio of 100:1, which was specially designed by us and is not standard. Output torque far above 70 Nm. The max. clamping diameter is 250 mm. The peak height is 125 mm. The drive is made by a controlled stepping motor of 200 steps with 7,5 A with a holding torque 9,7 Nm. Possible adjustable graduation accuracy at the output: 0,00028125 degrees with 1/64 step programming. The worm pair has four ball bearings and is adjusted backlash-free, also adjustable.the bearings are from FAG/SKF. The one-piece stable output spindle is equipped with a face plate d=200 mm with inner taper MK 3 and through hole 20,3.Weight 26 Kg Accessories: opt. USB-data lever for programming. opt. Sealing air connection. opt. 200mm three jaw chuck Cs Ia Tebatamo T Skorb opt.guard plate with intgr. sewing switch for auto-operation Quickly are key surfaces, a difficult ska

Condition: used, Used 5th 160 mm axis with hydraulic clamp and Siemens servo motors. Ce Ia T Towbuabs Skorb Located in Estonia, eU

Condition: excellent (used), Dividing Head / Quick Divider Cro Ia Tev S Ar Ij T Skeb Manufacturer: Unispa 24-degree direct division 1-degree increments with handwheel Center height: 135 mm (28604) Stock number Length: 470 mm Depth: 300 mm Height: 260 mm Weight: 60 kg

Condition: used, Technical details: weight of the machine approx.: 160 kg dimension machine xH: 0,58 x 0,50 x 0,3 m swivable: nein ° rotation movement: 360 Grad Application: For auxiliary work e.g. scribing of graduations. -dividing attachment with chuck Cre Iaju N E Dxj T T Sksb *

Condition: good (used), Rotary table, rotary indexing table, dividing head, dividing head Cj Isfk Affea T T Skjrb -Dividing attachment with: three-jaw chuck and crank -Chuck: Ø 160 mm -Dividing head: rotatable, swiveling -Dimensions: 540/470/H250 mm -Weight: 67 kg

Condition: used, Year of construction: 2001, centre height 160 / 180 mm Control NC Crs Ia T Teup H Rlo Skjb total power requirement ? kW weight of the machine ca. 120 kg dimensions of the machine ca. 500 x 230 x 270 mm

Condition: good (used), centre height 220 mm table diameter 220 mm 250mm - chuck - 3 jaws 80mm passage Cro Iaeu Sbl Rs T T Skjb Can be used vertically and horizontally Standing tip height 220mm

Condition: excellent (used), Year of construction: 1976, centre height 76 mm Cj Isu Twclja T T Sksrb centre distance 190 mm spindle bore 21 mm taper MK 3 weight of the machine ca. 40 kg dimensions of the machine ca. 720 x 210 x 215 mm

Condition: used, Dividing head Sip clamping surface diameter 300 mm 8 T grooves 12 mm wide swivelling 0 - 90 degrees length 800 mm width 600 mm height 300 mm Crj Ia T T Secv S Nvjksb Weight 120 KG

Condition: used, Year of construction: 1987, Technical details: max. pitch circle diameter: 360/24 mm Crj Ia T Tsu Nlg Te Skjb weight of the machine approx.: 46 kg centre height: 130 mm swivable: ja ° rotation movement: 360 Grad dimensions: 350 x 450 x 260 mm Application: For auxiliary work e.g. scribing of graduations. -dividing attachment with chuck Ø 125 in 360° pitch circle -clamping takes place via grid with index -pitch circle 24 -chuck: Ø 125mm, with revolving scale; through hole Ø 17mm; without jaws -base plate: size 260 x 300mm, with 2 clamping grooves WxL: 15 x 21mm - chuck key - 2 pieces groove stone *

Condition: good (used), Rotary table, rotary indexing table, dividing head, dividing head -Manufacturer: Reckermann, dividing head with: three-jaw chuck Cre Ia T T Sshikzwskjb -Type: UTA 125 -Three-jaw chuck: Rohm Ø 160 mm, inner Ø 32 mm -Spindle bore: Ø 25 mm -Dimensions: 500/420 / H220 mm -Weight: 54 kg

Condition: like new (used), Year of construction: 2020, CNC-4 axis dividing head for CNC BAZ - CNC milling machine Ce Iaeu Et Scs T T Skerb Fabr.HOFMANN Type : HOWIMAT CNC 160.2 / Z - LEAN Bj.2020 Mint condition Only test run . Control Hofmann CPS 20 Spindle bore : 80 mm Chuck Röhm ZS 160 . Documentation available . More data pull data sheets .

Condition: good (used), Center height: 125 mm Bore: 25 mm Space requirement: 500 x 400 x 250 mm high Ce Ia T T Sjg Hzbfskjrb including four-jaw chuck AROWA 200 mm Ø with tailstock MT 2

Condition: good (used), used dividing head with a 3 jaw chuck from Röhm (110 mm). Cre Ia Tsvtqlls T Skob

Condition: used, machine/vehicle number: 2502, DESCRIPTION Dividing head make Walter Type HT 200 U Tip height 200 mm Recording SK 50 Spindle diameter 130 mm Weight 260 kg Space required: T. 500 x B. 650 x H. 450 mm Crs Ia Toc Tuyrj T Sksb DMT0Z2OCZN9

Year of construction: 1987, Condition: used, centre height 390 mm passage of steadyrest 220 mm chucking diameter 400 mm Co Ia T T Sshgw Uxjkerb total power requirement / kW

Condition: good (used), gear, gears, gear shaft, pinion shaft Cre Ia Tswcxtzs T Skob -Gear shaft: straight-toothed pinion shaft -Gear: Diameter Ø 42 mm / 14 teeth -Tooth width: 83 mm -Dimensions: see photo technical drawing -Number: 9x gear shaft available -Price: per piece -Total dimensions: Ø 42 x 220 mm -Weight: 0.9 kg/piece

Condition: excellent (used), Year of construction: 2018, For sale Fourth axle from Haas HRT310 with 15 operating hours Year of construction 2018 Clamping surface diameter 310 mm Max. Weight on the clamping surface (with support) 197.3 kg Maximum weight on the clamping surface (unsupported) 98.7 kg Number of T-slots in basic configuration 6 x 60° Max. Max. speed 75 °/sec Torque (continuous) 407 Nm Weight 232 kg The dividing head can be inspected by arrangement in Upper Austria. The buyer takes care of transportation. Technical data, accessories and description of the machine are non-binding Crs Iou Haxlea T T Skjb

Condition: used, machine/vehicle number: 7979, Table Ø: 400 mm Table with 8 T-slots: 12 mm Ce Iasb Ez R Us T T Skerb Overall height: 175 mm Space requirement: 600 x 450 x 175 mm Weight: approx. 100 kg

Condition: good (used), Dividing head with 24 he direct Division or crank to Scala 200 he Röhm feed GES. Height 165 mm Depth 350 mm Width: 300 mm Crs Ia T T Sodx D Rzjkeb Weight 34.5 kg

Condition: good (used), Tailstock, counter bearing for dividing head, dividing head, lathe -Tailstock: for dividing head -Shaft: Ø 50 x 515 mm -Dimensions: see photos Ce Ia T Tjwag Uhs Skorb -Dimensions: 645/90/H200 mm -Weight: 7.8 kg

Condition: good (used), Grinding wheel puller, cup wheel puller, double grinding stand puller, surface grinding machine puller, cylindrical grinding machine puller, pulling head, dressing head for grinding machines, grinding wheel dresser, radius dresser, disc puller -Puller: groove width 12 mm -Dimensions: see drawing in the photos Cs Ia Tsv Sqy Te T Skjrb -Dimensions: 150/130/H80 mm -Weight: 2.0 kg

Condition: excellent (used), Spiral milling device, dividing head, dividing apparatus, rotary table, rotary table dividing head, spiral milling device with all accessories -comes from: a Deckel FP2 -Dividing head: spiral milling device with all accessories change gears, dividing disks Crj Ia T T Sod E Hlbskjb -Tip width: 415 mm -Recording: SK40 -suitable for: milling cutter grinding -Translation: 1:40 -Dividing head: swiveling -Dimensions: 820/390/H440 mm -Weight: 80 kg