Used Make Stack for sale (12,521)

Condition: good (used), Schneider Senator PL1 Q-600-H Paper Stack Lift Knedpsxmvb Iofx Afijc This machine is in perfect condition, practically new. Hydraulic drive, state-of-the-art hydraulic unit. 400V power supply. Automatic and manual lifting cycles, fast operation. Load capacity: 600 kg. Pallet/sheet dimensions: 760 x 1090 mm

Year of construction: 2007, condition: excellent (used), Tops Vendingsystem Fresh fries in 90 sec Knjdpfxofnblte Afijc Options: can be places inside and outside freezer with storagebox 150 portions automatic weighingsystem automatic oilinjectionsystem electronic controlsystem of the oil quality automatic distribution of sauce, cutlery and napkins choices of 4 sauces easy to use energy consumption per serving energy conservation oil temperature Dimesions: 1850 x 1010 x 885 mm Weight: 320 kg 220 V, 50 Hz

Year of construction: 2024, condition: new, functionality: fully functional, machine/vehicle number: 0963, Oven used for sinter paste drying and subsequent cooling of printed half-bridges Knodpfxoxm Ri Hs Afijc

Condition: good (used), Formit PRO X The FORMIT ProX is designed from aluminium (anodized) and stainless steel. The profiler is suitable for smaller installations with a ready product production capacity of up to 150 kg/ hour. The ProX profilers are suitable for producing balls sized between 17 and 33 mm. Knsdpjt Sxt Dofx Afijc The feeding of the raw material into the ProX is important for successful production results. It is recommended to place a good speed controlled conveyor in front of the profiler. Raw materials, such as potatoes and carrots (cut), can be successfully used. Cube shaped raw material can also be used. It is recommended to pre-peel all the raw material before use. Pre-peeled raw material improves the quality of the final product, increases the capacity and extends the user-life of the cutting edges on the shaping rolls. After the shaping process, it is recommended that the products are washed. For removal of the secondary product, we recommend the installation of a pump or some other transportation system underneath the machine. When producing balls from a pre-peeled product of a good size, the quantity of the secondary product may be almost the same as the primary product produced.

Condition: used, Stack cutter, guillotine cutter, Schneider Senator 155 Rubber, paper, and veneer shears, plastic shears, textile shears Rubber, paper, and veneer shears Machine No. 60178 Year of manufacture: 1968 Cutting length: 1550 mm Cutting height: approx. 125 mm Working height: 140 mm Back gauge max.: 1550 mm Blade drive motor power: 5.5 kW Power supply: 380 Volt, 50 Hz - Two-hand operation for cutting stroke activation - Automatic clamping: presser holds the paper stack on the table - Manual clamp and stroke activation via foot switch (operational) - Back gauge adjustable up to 1550 mm (manual handwheel adjustment) - Retrofitted electrical control unit not functional, without wiring diagrams or operator’s manual - Back gauge adjustment via servo motor (motor, controller, and control unit included, not functional) - Without light barriers (pictured light barriers are no longer present) Kjdpfedzqnyox Afijnc Required space (L x W x H): 300 x 270 x 165 cm Weight: 5100 kg Good condition Ideal for cutting paper, cardboard, leather, cork, rubber, or fabric-reinforced rubber Sale price does not include the 20 mm steel plate under the machine in the warehouse.

Year of construction: 1993, condition: excellent (used), machine/vehicle number: 32781, Size: 300 x 560 mm Kodpfx Afohncafoisnc Speed: 44.000 c/h

Condition: good (used), Polar Mohr LW 1000-4 Paper Stack Lift This device is in excellent technical and visual condition. This is the current production model. Hydraulic drive. Knodpsxgbfljfx Afisc 380V power supply. Automatic lifting cycle controlled by a photocell or manual mode, fast operation. Load capacity: 1000 kg. Pallet dimensions: 1200 x 800 cm

Condition: refurbished (used), Year of construction: 1998, functionality: fully functional, machine/vehicle number: 98486038, overall weight: 370 kg, stack height: 60 mm, type of input current: AC, total width: 114 mm, total length: 116 mm, total height: 135 mm, input voltage: 240 V, input current: 10 A, Description Kedjxdk A Ujpfx Afisnc The hydraulically operated and extremely robust stack cutter from PFI (practically identical to the DUPLO 490) delivers high performance and precision cuts for the on-demand market. This stack cutter is built to the highest quality standards and offers high-speed cutting up to a width of 490 mm and stack heights of up to 70 mm. Safety light barriers protect the operator during use, ensuring that no accidents occur and preventing cutting if objects are detected in the cutting area. Additionally, activation is via dual push-buttons requiring both hands, so no hand remains on the table during operation. Enter your cutting specifications directly via the user-friendly control panel. The back gauge positions itself automatically by motor drive as indicated on the digital display, and can also be fine-tuned with an adjustment wheel. An LED cut line shows exactly where the blade will cut. The foot pedal at the front of the machine securely clamps the paper stack in place. The system was in daily production until recently and is being sold due to a switch to a wider-format machine. Testing is possible at any time. The machine was completely overhauled hydraulically and electrically two years ago (approx. €4,000, and is virtually as new) and is in excellent condition. With the exception of the readout display, there are no electronic components in this system (and the display is basic), as the control is based on plug-in relays, making the machine practically indestructible. Various spare parts such as relays, limit switches, etc., will be included in case a replacement ever becomes necessary. Operating method: Hydraulic/Electric Included accessories and consumables: - 1x installed cutting blade (plus 1x spare blade) - 1x installed cutting stick (plus 3x spare cutting sticks) - Tools for blade changing - 1x operation manual and wiring diagrams Power supply: 240 V, 50 Hz, single-phase Dimensions: Width 114 cm, Height 135 cm, Depth 116 cm Cutting width: 490 mm, Cutting depth max. 490 mm, Minimum cutting depth 45 mm Cutting capacity: 70 mm stack height (approx. 700 sheets of 80g paper) Safety features: two-hand blade activation and safety sensors The machine is fitted with heavy-duty casters and can be fixed in place after positioning using supports. Year of construction: 1998 Weight: approx. 370 kg On request, we can palletize the machine for secure transport. The buyer is responsible for arranging shipping.

Condition: used, Year of construction: 2016, Delivery Palamides Alpha 500 HD Year: 2016 - Vertical stack delivery with pressing - Roller table delivery on the left Knjdpfsw Udnysx Afisc

Condition: used, Used GEA Westfalia model HSB-300-06-777 stainless steel disc stack centrifuge. Inlet feed 1.16kg/dm3 & heavy liquid 1.30kg/dm3. Maximum rated 4,800rpm. Unit includes stainless steel collection pot, used Seepex pump, control cabinet.. Unit is driven by 75kw, 1486rpm, 400volt, 3/50 electric motor. Knsdpfow T Rh Dex Afijc

Condition: good (used), Year of construction: 2009, functionality: fully functional, Good condition. Kedsxbplijpfx Afisnc

Condition: new, Year of construction: 2024, IDEAL FOR STAIRCASE CONSTRUCTION other variants on request - 5 tiers - clamping depth 1050 mm - 1 pressure beam -1500 mm long, 60 mm high, per tier - 3 infinitely adjustable pendulum counter bearings, 400 mm long, per tier Kodpfsgu D Rmsx Afienc - 2 hold-downs with handwheel, per tier - 5 support arms, per shelf - all support arms with plastic supports (glue-repellent) - maximum pressing length 1600 mm - powder coated (glue repellent): grey white RAL 9002, moving parts light blue RAL 5012 - the presses are delivered ready for operation with pressure regulating valve + air standard connection.

Condition: good (used), Polar Mohr L-1000-G-6 paper stack lift Device in perfect technical and visual condition. Hydraulic drive. Kjdpfx Afoxcn Hzoisnc 380V power supply Automatic lifting cycle controlled by a photocell or manual mode, fast operation. Load capacity 1000kg. Pallet dimensions 140x100cm

Condition: used, axle configuration: 3 axles, loading space length: 13,750 mm, loading space width: 2,480 mm, loading space height: 2,900 mm, first registration: 10/2015, color: blue, tire size: 435/50R22.5, Year of construction: 2015, Equipment: ABS, Axle configuration Tyre size: 435/50R22.5 Tyre tread: 50% Rear axle 1: Reduction: single reduction Ksdew Trnlspfx Afienc Rear axle 2: Reduction: single reduction Rear axle 3: Reduction: single reduction Dimensions Dimensions (L x W x H): 1386 x 255 x 400 cm Weights Unladen weight: 7,150 kg Payload: 31,850 kg Gross vehicle weight: 39,000 kg Condition Damages: none

Year of construction: 2000, condition: good (used), machine/vehicle number: Nbg, Only brackets available !!! Knedehy Eqhepfx Afijc 1x steel chain hoist with 2 load strands each 125KG with a Müller Martini pneumatic stacking tongs - gripper - lifter bundle Camp type 0277.0401 including chassis for mounting on Stahl KT2000, ABUS HB, or Demag KBK For paper, pallets, cardboard boxes etc. Chain hoist with 2 lifting speeds (fine lift), lifting height/chain length approx. 4m Weight complete approx. 150 kg Connection to 400V 50Hz Good condition, fully functional Different years of construction, about 20 pieces available! Item location is 75053 Gondelsheim See pictures Shipping by forwarding agent or pick-up

Condition: ready for operation (used), Year of construction: 2006, A blank turner for sheet metal blanks is available. Max. Blank dimensions X/Y: 1600mm/1100mm, max. blank stack height: 190mm, max. stack weight: 1500kg, max. stack inclination: 15°, cycle time with pallets: approx. 30s, machine dimensions X/Y/Z: approx. 3500mm/2500mm/2500mm, weight: approx. 3000kg. Documentation available. On-site inspection is possible. Knedpfx Aov I Dcgefioc

Condition: excellent (used), Year of construction: 2008, operating hours: 500 h, functionality: unexamined, machine/vehicle number: CV0604, pipe diameter (max.): 1,400 mm, Equipment: CE marking, Incremental HOT Pipe Induction Bending Machine – Cojafex (Netherlands) | 2008 Make: Cojafex (OEM, Netherlands) Model: Incremental HOT Pipe Induction Bending Machine Year of Manufacture: 2008 Condition: Almost unused – only 198 pipes bent Location: India (Currently dismantled & ready for transport) Availability: Immediate Price: Euro 1.5 Million Key Features: Original OEM Make – Cojafex, Netherlands, global leader in pipe induction bending technology Incremental hot pipe bending for high-precision industrial applications Suitable for bending large-diameter and 100 MM thick-walled pipes of Dia 1400 MM Machine is almost unused – only 198 pipes bent Ideal for oil & gas, energy, heavy engineering, and infrastructure sectors Condition & Readiness: Machine is dismantled, stored securely in India Can be inspected upon request OEM (Cojafex) ready to commission and install the machine on-site under a separate contract Logistics: Can be shipped internationally Crating and loading support available All original documentation available Serious Buyers Only: Ksdpfx Asw Igr Iefienc Inquiries welcome. Please contact us for detailed specifications, photos, and pricing.

Condition: used, Year of construction: 2014, functionality: unexamined, machine/vehicle number: Transport Tool Pump Stack, load capacity: 1,340 kg, Used heavy-duty custom installation built by Viro Engineering for Edwards. System is designed for lifting heavy vacuum pumps with a maximum lifting height of 50 cm (from ground level). Knodow H Rahspfx Afijc Installation name: Transport Tool Pump Stack Includes: 4 x hydraulic lifting cylinders and 4 separate cylinders for raising the undercarriage (all 4 wheels can be hydraulically lifted for stability). Voltage: 220 volts Net weight: 970 kg Maximum weight capacity: 1,340 kg Manufactured: 2014 System height at maximum lift: 250 cm Overall system height: 2005 cm

Condition: like new (used), Year of construction: 2012, Parker Engineering & Design Vertical Light Stack Module For testing solar modules Photovoltaic modules Electrical and mechanical safety testing Support for product development, design and quality control Detection of potential problems during development Quality and safety control  Endurance test stand  Temperature control  Mobile on rollers Entry pockets for forklift trucks Ksdpoh Rvh Sefx Afionc 400 VAC, 3.PH, 50 AMP IR. 10,000 amp Year 2012 Weight 1400 kg Further test equipment - new and used - you will find in our shop! International shipping costs on request!

Condition: new, Year of construction: 2024, Further variants on request - 4 tiers - clamping depth 1050 mm - 2 pressure beams -1200 mm long, 60 mm high, per tier Kodpfjgqu Aljx Afienc - 2 straight, infinitely adjustable counter bearings, 1200 mm long, per tier - 6 hold-downs with handwheel, per tier - 6 support arms, per shelf - all support arms with plastic supports (glue-repellent) - maximum pressing length 2600 mm - powder coated (glue repellent): grey white RAL 9002, moving parts light blue RAL 5012 - the presses are delivered ready for operation with pressure regulating valve + air standard connection.

Condition: used, Year of construction: 2004, Delivery Ksdpowu Ti Iefx Afienc Heidelberg-Stahlfolder, SBP.D-66 + MKE Year: 2004 -Marking device -Horizontal stack delivery with pressing

Year of construction: 1998, condition: ready for operation (used), Number of levels: 4, pressure beam: 4/level, hold-down device: 4/level, pressing length: 2000mm, pressing width: 1040mm, max. workpiece thickness: 80mm, total pressing pressure: 12t, effective depth: approx. 980mm, distance between outer edge uprights and outer edge uprights: 1940mm, machine dimensions X/Y/Z: approx. 2400mm/1700mm/2100mm. On-site inspection is possible. Knodpfxjvtqr So Afisc

Condition: used, Year of construction: 2021, Year: 2021 Condition: perfect - available - immediately Configuration: - Gripper "M" Specification: Knedpfowzi Ruox Afisc - speed: 300 packets / h - unloading high 900 mm - automatic change of loading pallet from left to right

Condition: used, Stapellift  / Stack Lift Polar SFA-3 Baujahr / Year 2001 - Serial-No. 7177002 Tragfähigkeit / Carrying apacity max. 1000kg Lichtschranke / Light barrier Sehr guter Zustand / Very good condition Knjdpfxov Rrtlj Afioc Online-Video-Inspection by WhatsApp - MS Zoom - Telegram On Stock Emskirchen/Nürnberg - Available Immediately - Can be test

Condition: used, Year of construction: 1987, machine/vehicle number: 33879, Stehendbogenauslage - Horizontal Stack Delivery with Pressing Stahl SBP 46Year 1987 - Serial-No. 33879/87-134584 Online-Video-Inspection by Skype-Video Knsdpfxeh Aygfj Afioc We would be very pleased with your visit - more machines on Stock Available Immediately - Can be inspect On Stock Emskirchen / Nürnberg - Can be test