Used Mfd for sale (38)

Condition: good (used), Year of construction: 1996, incl. Chip conveyor incl. Chip crusher Under power incl. spare rollers Power on hours  23.000 H Working hours ca 8.000 H Rail track gauge: 1435mm Max. wheel tread Ø: 1400mm Min. wheel tread Ø: 520mm Max. axle length wheel set:2450mm Min. axle length wheel set:1620mm Gksdpfxew Rc Drs Afijc Speeds / ranges: 154Rpm Number of slides: 2 Power: 44kW Length: 6000mm Width: 2200mm Height: 2600mm Weight: 33000kg

Condition: used, Year of construction: 1973, turning diameter over bed 2235 mm turning diameter over slide rest 2997 mm turning length 12200 mm Control SIEMENS faceplate diameter 2000 mm required space ca. 7 x 22 m weight of the machine ca. 220 t HOESCH MFD CNC HEAVY DUTY LATHE WITH SIEMENS CONTROL Type: D2000 SGK-1 Technical documentation is included Technical Specifications Space requirement: 7 x 22 metres + control cabinet 4.7 x 0.5 x 2 metres Faceplate 2006mm Centre Height 1,499mm Swing Over Saddle 2235mm Swing Over Bed 2997mm Turning Length 12192mm Min/Max Workpiece Held In Chuck Ø457/1600mm Maximum Workpiece Weight 110 Ton Speed Range 0.5- 140rpm (300hp Motor) Feed Range 0.0118-7.08''/Rev. Steady Capacity Ø356-902mm Copying Depth 508mm lnductive Maximum Cutting Force 30,000Nm Twin Barrel Steady Capacity Ø356- 902mm, 50 Ton Capacity, Roller Type. Machine Data 1.1 Total Machine Max. Swing over bed slide 2,000 mm Center height over bed 1,500 mm Distance between centers 12,000 mm Gkodpfst Ei Hujx Afiec max. weight of workpiece 100,000 kp height measured from shop floor level up to machine axis 2,200 mm 1.2 Headstock Diameter of main spindle 670 mm Diameter of faceplate 2,000 mm Max. chucking diameter 1,600 mm Min. chucking diameter 455 mm Dead Center Angle 80 ° Faceplate Speed: Constant torque 1st range 0,5 – 2,6 2nd range 1,25 – 7,2 3rd range 3,1 - 18 4th range 7,8 - 45 Constant capacity 1st range 9,0 2nd range 22,6 3rd range 56 4th range 140 Capacity of Main Drive 220 HP Max. Torque faceplate 30,000 kpm Key Speed 5,7 rev/min 1.3 Saddle Max. admissible main cutting force 30,000 kp Feed Speed longitudinal 0,3 – 120 mm / min Feed Speed transverse 0,3 – 120 mm / min Rapid Traverse Speed longitudinal 2,000 mm/ min Rapid Traverse Speed transverse 1,000 mm/ min Max. copying depth 500 mm Max. length of tool carrier measured from front edge cross slide to front edge tool carrier 700mm Tool carrier – width 60mm 35 mm Cutting Edge height of tool units 60 mm Cutting edge height of shank-type tools beeing located on the clamping table 100 mm Travel of upper tool post 820 mm 1.4 Tailstock Tailstock barrel diameter 580 mm Adjustment of the barrel 150 mm Dead Center angle 80 ° Speed of rapid traverse 2,000 mm / min Positioning speed 500 mm / min 1.5 Steady Clamping range 350 – 900 mm ...

Condition: good (used), Year of construction: 1970, Rail track gauge: 900 - 1680mm Max. wheel tread Ø: 1300mm Min. wheel tread Ø: 650mm Max. axle length wheel set:2350mm Min. axle length wheel set:2050mm Max. clamping Ø: 1050mm Min. clamping Ø: 700mm Face plate Ø: 1400mm Speeds / ranges: 31,6Rpm Number of slides: 2 Sjablone copy attachment: 2 Power: 90kW Length: 5400mm Width: 3600mm Height: 2900mm Weight: 56000kg Gkodpfxewvkb Re Afioc

Year of construction: 2017, condition: good (used), Railway lahte HOESCH MFD - DRH 1400 N2D MACH-ID 9089 Make: HOESCH MFD Type: DRH 1400 N2D Control: SIEMENS 840D Year: 2017 Doubled support carriage CNC controlled measuring and correction probe Chip conveyor internal and external clamping jaws (wheel clamp in and out) overhauling cost 850k EUR Under power free 02.2026 Rail track gauge: 1435mm Max. wheel tread Ø: 1600mm Min. wheel tread Ø: 200mm Gkjdpewb Aq Uofx Afisc Max. axle length wheel set:2065mm Face plate Ø: 1400mm Number of slides: 2 Sjablone copy attachment: 2 Power: 55+55kW Length: 9200mm Width: 6800mm Height: 3800mm Weight: 47000kg

Year of construction: 2010, condition: good (used), Make: Hegenscheidt MFD Type: PR 250 / 1000 Gsdskvnggepfx Afiokc Control: Siemens TOUCH Year: 2010 Rebuild in 2010 with SIEMENS TOUCH Rebuild cost EUR 200.000 Distance measuring device with double taster Big package with pressing tools in several diameters Specifications Metric US Standard Centre height 550 mm Max. wheel tread Ø 1100 mm Max. wheelset length 2500 mm Max. pressing force 250 T Max. cylinder stroke 500 mm Cylinder Ø 300 Working speed 10 - 80 mm/min. Pinole feed 1300 mm/min. Return speed 1300 mm/min. Dimensions (Estimate) Length 6100 mm Width 5730 mm Height 3750 mm Weight 15900 kg Please Note: The information on this page has been obtained to the best of our ability and belief, and from the manufacturers where possible. It is given in good faith, but its accuracy can not be guaranteed. Accordingly, it will not form a representation or constitute contractual terms. We advise you to check any vital details!

Condition: excellent (used), Anton Paar Type: CarboQC At-line MFD with filling system PFD Gedpfjv U U D Uex Afiskc Description: These precise measuring devices for dissolved CO₂ offer reliable quality control of finished packaging and containers, as well as directly from the process line or tank. They guarantee fast and accurate determination of dissolved carbon dioxide in beverages during production and bottling. In combination with our filling devices, samples can be taken directly from the packaging into the measuring chamber of the dissolved CO₂ measuring device without any loss of dissolved CO₂ during sample transfer. Combined CO₂ and DO measuring device: CarboQC At-line For the measurement of dissolved CO₂ in the production environment Sampling directly from process lines or the tank Protection class IP67 and rubber housing Technical data: At-line CO₂ measuring range 0 g/l to 12 g/l (0 vol. to 6 vol.) at 30 °C 0 g/l to 20 g/l (0 vol. to 10 vol.) < 15 °C Temperature -3 °C to 40 °C, accuracy ±0.2 °C Pressure 0 bar to 10 bar absolute (0 psi to 145 psi), accuracy 0.01 bar Repeatability, std. dev. CO₂ ±0.04 g/l (0.02 vol.) CO₂ resolution 0.01 g/l Sample volume >150 ml Units CO₂ g/l, vol., mg/l, kg/cm², MPa, % w/w Measurement time 55 seconds Data storage 500 measurement records Functions FillingCheck™, CO₂ data logger, threshold function, system check Mobile use Up to 11 hours continuous operation Communication interfaces 1 x RS-232 (CAN-open[1]), 1 x USB Protection class IP67 Dimensions (L x W x H) 262 mm x 209 mm x 176 mm Weight 2.1 kg The PFD filling system transfers your sample directly from the closed container – whether can or bottle – into the measuring chamber of the measuring device. Since the seal is applied before piercing, no carbon dioxide is lost during sample transfer, making the PFD and PFD Plus the ideal filling devices for CO₂/O₂ measuring devices and Packaged Beverage Analyzers. Technical data Maximum allowed container volume Cans 0.5 l Glass bottles 1 l PET bottles 3 l Compressed air 6 ±0.5 bar (87 ±7 psi) relative pressure Dimensions (L x W x H) 190 x 270 x 670 mm Maximum height (cutting head in highest position) 1020 mm Weight: 10.1 kg Condition: used Scope of delivery: (See picture) (Changes and errors in technical data, information reserved!) We are happy to answer further questions for you by phone.

Condition: used, Year of construction: 2010, Welding fume filter, welding fume extraction, soldering fume extraction, mobile filter unit, welding fume extractor -Manufacturer: Euromate, mobile welding fume extraction with 2 extraction pipes -Type: MFD -Drive: 0.75 kW -Filter: with contamination indicator -Suction pipes: length 2900 mm Gedpfxerzvw To Afijkc -Transport dimensions: 1200/800/H1100 mm -Weight: 101 kg

Condition: good (used), Year of construction: 2004, DGT Plus control system (Siemens basis) Sanding length 2400 mm Sanding width 1290 mm Sanding height 700 mm Magnetic table 2000 x 1100 mm Gkjdpfovg Sifex Afioc Max. Table load capacity 5000 kg Grinding wheel width 150 mm Sanding spindle speed 960 rpm Machine weight approx. 30 tons

Condition: ready for operation (used), controller model: Num, empty load weight: 35,000 kg, total length: 11,000 mm, total width: 2,950 mm, total height: 2,000 mm, swing diameter over cross slide: 6,500 mm, Robuuste draaibank met 4 geharde lineaire geleidingen Maximaal werkstukgewicht: 20 ton bestemd voor staalfabrieken, walsgieterijen, smederijen voor het maken van producten zoals turbinerotoren, grote assen en staafproductie Gjdpfewaiu Rex Afiskc Swing over bed: 1400 mm Swing over cross-slide: 1100 mm Power on the spindle: 81 kW Chuck: 900 mm

Condition: excellent (used), Year of construction: 2018, Brand: DMG MORI Model: DMF DMU 75 Monoblock Year: 2018 CNC: Heidenhain iTNC640 Equipped with: Integrated rotary table, diameter 600 mm / 600 kg capacity Spindle 35 kW – 20,000 rpm Tool changer with 60 positions Probe TS 649 3D quickset Through-spindle coolant 40 bar Tool probe Coolant spray gun Chip conveyor Specifications: Gsdpfxjxmi Als Afijkc Table surface: 800 x 650 mm (dia 600 tilting) X-axis travel: 750 mm Y-axis travel: 650 mm Z-axis travel: 560 mm B-axis: -/+120° C-axis: 360.000° Spindle speed: 2 - 20,000 rpm Spindle power: 35 kW Spindle taper: SK 40 Rapid traverse XYZ: 40 m/min Machine dimensions (approx.): 3200 x 2600 x H 2900 mm Weight (approx.): 11,600 kg

Condition: excellent (used), Wittmann Temperature Control Unit Here we offer you a Wittmann temperature control unit. Wittmann Temperature Control Unit DISCO 2 Singulus 3X415V 50/60Hz 16A 5kW Type: TR7B7D7D0X_09_00 Condition: used / used Gkjdpfx Aolkbapefiec Scope of delivery: (See picture) (Changes and errors in technical data, specifications are reserved!) Further questions we can answer on the phone for you.

Condition: used, Electric motor, three-phase motor Gedoh A Iy Hjpfx Afijkc -Manufacturer: EMF DORDT, electric motor type 226U 7.5/4 -Power: 0.55kW -Speed: 1395 rpm -Shaft: Ø 19 x 40 mm -Construction: B3 -Dimensions: 280/220/H170 mm -Weight: 21.3 kg

Condition: used, Gas and air filters, air filters -Manufacturer: Maxitrol Gkodpfsd D Iq Dex Afijc -Type: GF65 MF-DN65 -Dimensions: 245/199/H190 mm -Weight: 4.5 kg

Condition: used, Year of construction: 2016, functionality: fully functional, machine/vehicle number: 430/16, Powder Coating Line (Pass-through Polymerization Oven for Powder Paint, complete with Conveyor System and Dual Paint Booth) Gksdpfou Hib Nox Afioc Basic technical data of the oven: - Max. external dimensions (L x W x H): 9.6 m x 6.6 m x 2.5 m - Weight: approx. 9,000 kg - Max. operating temperature: 220°C - Max. burner power / GZ50/: 2 x 160 kW - Fan motor power: 24 kW - Power supply: 3 x 400 V +N +PE, 50Hz Maximum workpiece dimensions: - L = 2.0 m - H = 1.0 m - W = 0.6 m Included with the machine: Complete technical documentation + parts lists. The oven is integrated with an overhead conveyor system by JOKŚ. The conveyor system includes 42 m of tracks, along with a drive system and lubrication system; control system with speed regulation in the range of 0.5–1.5 m/min. APAR AR200 speed recorder, LG iG5A series inverter, EATON MFD-AC-CP4 manual power/communication module, MFD-CP4, MFD-80. Manual powder coating booth; pass-through, two-station. Paint access windows on opposite sides, offset. Max. dimension of painted workpiece: - L = 2.0 m - H = 1.0 m - W = 0.6 m A linear overhead transport system runs through the center of the booth. The booth includes 3 tanks adapted for powder recovery/color change, filtration system based on cartridge filters. End tanks equipped with screens.

Condition: good (used), Year of construction: 1980, Davenport Model B 3/4" Mfd. in 1980s Pickoff / Back Finish Threading Stock Reel and Stand Chip Conveyor Noise Tamer Sound Enclosure Refurbished and Ready to Run Gjdsh I Euaopfx Afiekc Several similar machines available

Condition: ready for operation (used), Year of construction: 1986, functionality: fully functional, working width: 1,420 mm, Year: 1986 Width/mm: 1420 Thickness/µm: 14-400 Material: PO, PE, paper, HDPE, LDPE Detail: Plant consists of: 2x Fife edge trim control 2x Ahlbrand MFD 2000 pre-treatment units (year 2001) 1x Print Concept UV unit type PC 2w-1600-2x1 (year 2001) Coating unit with individually temperature-controlled rollers. Sleeve system D: 76mm. Gkodpfjxcy Hysx Afijc Several spare parts included.

Condition: used, mileage: 85,600 km, power: 96 kW (130.52 HP), fuel type: diesel, gearing type: automatic, overall weight: 3,500 kg, empty load weight: 2,550 kg, first registration: 02/2021, fuel consumption (urban): 7.4 l/100km, fuel consumption (extra-urban): 6.5 l/100km, fuel consumption (combined): 6.9 l/100km, CO₂ emissions: 182 g/km, emission class: none, color: silver, driver cabin: other, suspension: other, number of seats: 3, total length: 5,690 mm, construction height: 2,550 mm, fuel: diesel, Equipment: ABS, air conditioning, airbag, central locking, cruise control, electronic stability program (ESP), immobilizer system, navigation system, onboard computer, parking heater, soot filter, traction control, * Appointment for consultation and test drive = shorter waiting times: * Time is precious and you shouldn't spend it waiting. Therefore, we ask you to arrange an appointment by phone for a consultation or test drive. * Non-smoker * Service booklet * This vehicle comes with a well-maintained service record. * Last service was carried out at 80,180 km. TRANSMISSION / CHASSIS * Drive type: Front-wheel drive * Automatic transmission SelectShift - (6-speed) Gsdpfx Afewblxnoiskc LIGHT & VISIBILITY * Visibility package 1 * Metallic paint * Cornering lights * Intermittent wipers, adjustable * Entry lights * Headlight range adjustment * Turn signal integrated into exterior mirror * Rear fog lights ASSISTANCE SYSTEMS AND SAFETY * Audio system 24/25: Navigation system incl. SYNC 3 with AppLink and 8" multifunction display * Driver assistance system: Side wind assist * Driver assistance system: Hill start assist * Cab seats: Driver's seat with lumbar support * Passenger airbag * Driver airbag * With passenger airbag deactivation COMFORT * Auxiliary heater * Additional electric heater * Fog lights * Daytime running lights * On-board computer * Front and rear parking sensors * Cruise control * Air conditioning * Diesel particulate filter * Start/stop system * Heated windshield * Safety belt - black * Not for mobile office equipment * Microphone * Radio controls - steering wheel - remote control with PTT * Less headlamps - wiper activated * Less roof marker/clearance light * With roof-mounted interior/map lights * Roof-mounted radio antenna * With additional brake light * Partially body-colored front bumper * Sync III * MFD TFT touch screen * With rear parking aid * With navigation system * . - Partial plastic insert * With lockable luggage compartment * With pollen filter * Heated driver's seat * Heated passenger seat * Standard front seats * Two-stage door system * With rear doors * Fixed rear-view camera * With full wheel cover * Special high performance alternator * And much more * The above information is provided without guarantee. It does not constitute an agreed condition. Errors and prior sale reserved. * Our services: * Financing available even without down payment * Registration service * Trade-in of your old car: * Delivery possible * Tire service, winter and summer tires available for an extra fee * We also speak different languages: * English, French, Spanish, Italian, Russian, Turkish, Serbian, Czech, Croatian, Bosnian, Macedonian, Slovenian, Bulgarian, Slovak * We look forward to your visit!

Condition: excellent (used), Year of construction: 2000, INDEX ABC CNC Lathe. Mfd. 2000 Control: Siemens 840C Capacity 65mm Ran oil Still in production, running nylon With 12-ft Bar Feed (pictured) Chip Conveyor Comes the a good amount of tooling Control Type: Siemens SINUMERIK 840C Spindle Speed (max.): 6,000 RPM Power Requirements (V/Hz/PH): 400/60/3 Main Spindle Speed (max.): 6,000 RPM Bar Capacity: 65 mm Power: 20 kW (at 100%) Power: 27 kW (at 40%) Synchronous Spindle Speed (max.): 4,500 RPM Power (max.): 4.2 kW Capacity Tool Carrier 1: 8 (7 + synchronous spindle) Tool Carrier 2: 6 Dimensions Bar Feeder: L 150" x W 27" x H 52" Gksdpfx Afew Td U Rjisc Turning Center: L 80" x W 48" x H 65" Power Enclosure: L 52" x W 18" x H 70" Chip Conveyor: L 88" x W 48" x H 35"

Condition: excellent (used), Year of construction: 1999, Citizen BL-12 CNC Swiss Style Mfd. 1999 Mfg No. BL12 12/0073 SN: L10037 Comes with Bar Feeder (not pictured) Machine has no guide bushing (chucker mode only) Machine has no sub-spindle Spindle Bore Diameter: 0.5″ (~12.7 mm) Spindle Power: 3 hp (~2.2 kW) Maximum RPM: 12,000 rpm CNC Control: (typical) Fanuc 21i-TA or equivalent Tool Configuration: Gang/boring setup, front & rear stations Gksdpjw Sx U Asfx Afioc

Condition: excellent (used), Year of construction: 2018, Index G220 CNC Mill Turn Mfd. 2018 (Demonstration Machine)  Recommissioning 2021 Control: Siemens 840D Solution Line, few production hours Main spindle D90 Counter spindle D90 Clamping pressure device 8 to 80 bar Upper tool carrier with motor milling spindle HSK-T63 Axes X, Z, Y and B Tool carrier 2 with X, Y, Z-axis and turret head with 12 stations VDI30 Tool changer with chain magazine double-row HSK holder 2 x 50 HSK 63 Tool management type "Milling machine" with relative D-number Cooling unit Automatic work door Light barrier for drill breakage control 5-axis simultaneous machining for motor milling spindle Motor current-based tool monitoring system Management of tools with setup dialog (max. 250 tools) Workpiece measuring on main or counter spindle Measuring cycles Follow-up center for cross slide 2 Tailstock function in the counter spindle Electronic shaft Grinding cycles Chip conveyor Gedpsw Tfanofx Afiokc Filter Coolant system ECO-Fluid 3 pumps 3, 8, 20-80 bar UNIMAG4 Portal removal device Transport belt No clamping devices, no tool holders, ex location

Condition: good (used), Year of construction: 2006, INDEX MS52C CNC Multi-Spindle Mfd. 2006 Control: Siemens 840D Gksdpjt Rkzwsfx Afisc 6 Spindles 52mm Capacity Equipped as pictured Under power Knoll System Chip Conveyor Riedel Chiller 3.6 meter (12ft) IEMCA SIR Bar Feed SIR MS52/F Type 38 XL Mfd. 2005

Condition: excellent (used), Year of construction: 2019, Doosan Puma TT2100SYY Mfd. 2019 Tooled as pictured Specifications SWING OVER BED 9.05" MAX CUTTING DIAMETER 9.05" DISTANCE BETWEEN CENTERS 38.5" X-AXIS TRAVEL 6.5" Y-AXIS Yes Y-AXIS TRAVEL 3.93" Z-AXIS TRAVEL 27.5" C-AXIS INDEXING FULL CONTOURING C-AXIS CHUCK SIZE 8" BAR CAPACITY 2.625" SPINDLE NOSE A2-6 SPINDLE MOTOR 35 hp SPINDLE SPEED 5,000 RPM RAPID TRAVERSE RATE - X-AXIS 1,181 in/min. RAPID TRAVERSE RATE - Z-AXIS 1,575 in/min. SUB SPINDLE Yes SUB SPINDLE - CHUCK SIZE 8" SUB SPINDLE - BAR CAPACITY 2.56" SUB SPINDLE - SPINDLE NOSE A2-6 SUB SPINDLE - SPINDLE MOTOR 25 hp SUB SPINDLE - SPINDLE SPEED 5,000 RPM SUB SPINDLE / W-AXIS TRAVEL 28.7" TURRET CAPACITY 12 TURRET TYPE BMT55 LIVE MILLING Yes LIVE MILLING SPEED 5,000 RPM LIVE MILLING MOTOR 10 hp TURRET 2 CAPACITY 12 TURRET 2 - X-AXIS TRAVEL 6.5" TURRET 2 - Z-AXIS TRAVEL 27.56" Dimensions 93" X 153" (W/CONVEYOR - 186") X 88.6"H Weight 20,940 LBS Equipped With FANUC OiTF CNC CONTROL DOOSAN EZ GUIDE i PROGRAMMING TWIN 12 POSITION TURRETS UPPER AND LOWER, W/24 POSITION INDEXING ON EACH TURRET WITH BASE MOUNT TOOLING SYSTEM Y-AXIS ON BOTH TURRETS (2) INTEGRAL SPINDLES Gedpfew Dvnxjx Afiokc FULL CONTOURING C-AXES ON BOTH SPINDLE MILL/DRILL ON UPPER AND LOWER TURRETS PARTS CATCHER LEFT AND RIGHT PROGRAMMABLE PARTS UNLOADER PARTS CONVEYOR BAR FEED INTERFACE 8" 3-JAW KITAGAWA CHUCK FOR LEFT AND RIGHT SPINDLES (COLLET SYSTEMS IN ON MACHINE NOT INCLUDED IN SALE) (2) X-AXIS LIVE HOLDERS (2) Z-AXIS LIVE HOLDERS STANDARD FACTORY STATIC TOOLING DOOSAN TOOL LOAD MONITORING SYSTEM AIR BLAST SYSTEM FOR CHUCK CLEANING 2 machines available

Condition: excellent (used), Year of construction: 2021, INDEX MS22-8 Gsdpfxewt Unvs Afijkc Mfd. 2021 (Commissioned 2022) Double NCU (2) Synchrons MBL Bar Feed 3.3 Meters Estimated Hours: 10,000 Contact us for full specifications

Condition: used, Year of construction: 2003, INDEX MS32G Gsdpfx Aow A S H Ujfiokc Overhauled completely: 2020 Original mfd. 2003 6 Spindles 32mm Capacity Siemens 840D control Equipped as pictured Kraft & Bauer fire extinguishing system All spindles on the machine were overhauled 2 years ago incl. clamping cylinder except for one on the GSP. - GSP is equipped with Hainbuch Spanntop and used Röhm jaw chucks - No tools are included - No FZ tubes / no bar pusher - Last year, spindle encoders on the HSP incl. GSP were completely renewed. Equipped with Lenord & Bauer IEMCA SIR-MS32/33/P See attached specifications.

Condition: excellent (used), Year of construction: 2018, INDEX MS16 Mfd. 2018 Gsdjw A S Hnepfx Afiskc 6 Spindles 1 NCU Capacity: 16mm 1 Syncron Equipped as pictured Loader: IEMCA NEXT-MS16 Knoll System