Used crushing units for sale (118)

Condition: ready for operation (used), Year of construction: 2012, functionality: fully functional, Equipment: documentation/manual, Panizzolo PZ 2H 1000 – Hydraulic Twin-Shaft Shredder | Ready for Operation Panizzolo PZ 2H 1000 hydraulic shredding unit offered for sale. Machine designed for heavy-duty metal and industrial waste processing. Technical specifications: Twin cutting shafts, working length: 1000 mm Hydraulic drive system – high torque and stable performance under heavy load Cutting chamber approx. 1000 × 700 mm Replaceable alloy steel knives, suitable for metals and industrial waste Robust steel construction, designed for continuous operation in recycling plants Additional advantages: Gisdpfxjxlgrhe Af Uep Machine in good technical condition Available immediately Possible inspection or video presentation Support with loading and export logistics (EU / non-EU) Machine located in Poland. Serious inquiries only.

Condition: new, Year of construction: 2026, FABO Bucket wheel washers are intended to maximize the support of various terms throughout the process, such as the maximum recovery of fines or maximum remove of fines with lower power capacity. Gedpjwbql Hjfx Af Uoip Sand and water compound is supplied into the washing tank of bucket wheels and the sand is obtained and dewatered by impellers after washing. The dirty water enters the spiral tank for fine sand pressing, then the pressed fine sand is shifted into the bucket wheel tank by the gradually rotating spiral blade, the fine sand is carried out by the buckets, dewatered and discharged.

Condition: new, Year of construction: 2025, The 3E Machinery tire recycling system is a state-of-the-art, modular industrial line engineered for the efficient processing of used passenger, truck, and industrial tires into clean fractions such as rubber granules, steel, and textile fibers. This installation provides high throughput, low energy consumption, and full compliance with environmental protection standards. Comprehensive Tire Processing Technology • The system comprises several processing stages that guarantee complete material downsizing and separation: • Pre-cutting and primary shredding of whole tires • Multi-stage size reduction with dual-shaft and four-shaft shredders • Granulation and fine milling of rubber • Magnetic separation of steel • Air and cyclone separation of textile fibers • Final purification and classification of rubber granulate Giodjx Aidbjpfx Af Uop This process enables the production of high-quality rubber granules in various sizes (from 30 mm down to 1–4 mm), as well as clean steel suitable for recycling. System Throughput and Application Range • Throughput: from 500 kg/h to over 10,000 kg/h • Material types: passenger car tires, truck tires, industrial tires, solid tires, bead-reinforced tires • Final output products: o rubber granules (30 mm, 10 mm, 1–4 mm) o rubber powder o steel o textile fibers • Optional low-noise and low-dust engineering packages available The layout can be customized to match the client's required capacity and available plant space. Why partner with our company – Official European Representative of 3E Machinery • Competitive pricing without intermediary markups. We offer equipment directly from the factory in China, without additional distributor or agent margins, ensuring highly competitive pricing while maintaining full manufacturer quality. • Comprehensive technical and commercial support. Based on client specifications, we select the appropriate line configuration, define process parameters, capacity, and technology scope—ensuring a perfect match for each project. • Full assistance throughout the entire procurement cycle. We support customers from the initial inquiry, through technical discussions, payment terms, and to the conclusion of the final agreement with the manufacturer. • Logistics and transportation support. We assist with organizing international transport, customs clearance, and required documentation so delivery proceeds smoothly and without complications. • Extensive experience in the recycling industry. As a long-standing European representative of 3E Machinery, we provide practical know-how and market expertise that greatly simplifies the purchasing process.

Condition: like new (used), We offer a comprehensive spare parts package for the machine types Doppstadt DW 3060 and Doppstadt AK 430/435/560. These are new and as-new parts! Please request our list! Godpfxjqx Ur Do Af Ueip Do you have a problem with your bevel helical or planetary gearbox? We offer qualified repair service, spare parts, and new gearboxes! We will accept your defective gearbox as part exchange after inspection! Please send us your enquiry!

Condition: new, Year of construction: 2025, The 3E Machinery lithium battery recycling system is an advanced, fully integrated technological solution designed for the safe, efficient, and environmentally responsible processing of spent lithium batteries and electrode materials. The line combines state-of-the-art crushing, separation, thermal treatment, and industrial automation technologies, enabling the recovery of valuable raw materials while maintaining the highest safety standards. Comprehensive Resource Recovery Technology The recycling process utilizes a series of physical and thermal operations, including: • Multi-stage crushing • Gravity and air separation • Precision screening • Drying and low-temperature pyrolysis • Exhaust gas purification • Central dust removal and fully sealed material conveying Depending on the selected process configuration, the system enables the recovery of key fractions such as copper, aluminum, separator film, black mass, electrolyte, and additional components. Key System Features 1. Safe and Controlled Crushing • Specialized, patented shredders and crushers specifically designed for lithium batteries • Capable of processing charged batteries thanks to gas protection technology and multi-level fire prevention systems • Three-stage crushing process ensures optimum material liberation 2. High-Efficiency Material Separation • Air separation system with up to 99% efficiency for separating light and heavy fractions • Combined static and dynamic screening for optimal recovery of black mass • Precise gravity separation of copper and aluminum granules 3. Thermal Processing – Drying and Pyrolysis • Drying at 100–150°C with the possibility of recovering condensed electrolyte; separator films remain intact for further processing • Low-temperature pyrolysis at 450–600°C effectively removes organic matter and improves the quality of recovered black mass • Advanced exhaust treatment system utilizing catalytic oxidation, alkaline scrubbing, and activated carbon filtration to meet emission standards 4. Full Automation and Operational Safety Gijdjxz A R Ejpfx Af Uop • Central control system based on Siemens PLC, compatible with MODBUS TCP/IP, PROFINET, and OPC • Modular design ensures flexibility, easy maintenance, and scalable system configuration • Fully enclosed conveying and central dust removal systems maintain a clean and safe working environment System Capacity and Technical Scope • Processing capacity: 500 to 20,000 tons per year • Installed power: 150–1280 kW Applications: • Spent EV and industrial batteries • Consumer lithium-ion batteries (3C) • Positive and negative electrode sheets • Modules, cells, and production scrap Layout: Custom-designed according to client facility requirements. Optional Extensions: • 3E Machinery also offers complementary systems, including: • Battery pack dismantling lines • Separator film cleaning and recycling lines • Black mass refining and purification systems • Aluminum and steel component recycling solutions Why Choose 3E Machinery Technology? • Over 20 years of expertise in recycling technologies • Proprietary patented equipment, including lithium battery crushers and shredders • High level of automation and advanced process safety • Global references with numerous installations across Europe and Asia • Comprehensive support from design to commissioning and after-sales service.

Condition: used, Year of construction: 2021, operating hours: 1,930 h, functionality: fully functional, PANIZZOLO PZH1500R – Twin-shaft Pre-shredder / Rotary Shear – Metal Shredder – 264 kW – 1,930 h Manufacturer: Panizzolo Recycling Systems Model: PZH1500R / PZ H 1500 R Machine Type: Twin-shaft shredder / Rotary shear / Pre-shredder Year: ____ Operating hours: 1,930 h Condition: Used Technical Specifications Cutting chamber: 1,500 × 1,400 mm Installed power: 264 kW (2 × 132 kW) Shaft speed: approx. 6–12 rpm Knives: Bolt-on (knives / cutters) Transmission: Heavy-duty industrial gearboxes Control: PLC / industrial automation system Gjdpfx Afex I Dc Es Ujip Weight: approx. 27,500 kg Applications / Materials Light scrap Steel sheets Drums / barrels Metal tanks Aluminum profiles Ideal for metal recycling, waste treatment center, shredding line, scrap metal recycling. Condition Fully functional machine Knives need replacing Regularly serviced Inspection and testing possible on site Sales conditions & pricing 🔧 Option 1 – Sold as-is (work required) Availability: immediate Price: €250,000 net ✅ Option 2 – Sold ready-to-use (fully serviced) Knives replaced General inspection and refurbishment Availability: lead time after order Price: €310,000 net

Condition: as good as new (ex-display), Year of construction: 2024, functionality: fully functional, machine/vehicle number: WKZ45-1030, CLEARANCE SALE, STOCK MACHINE! We invite you to visit our technical center to experience the quality and functionality for yourself. Material Shredder 45KW Hopper opening: 1,030 x 1,235 mm Rotor diameter: 360 mm Star-delta start, automatic shut-off during idle - Hydraulic pusher equipped with pressure plates - Siemens PLC control - Optionally with control cabinet extension for discharge conveyor belt and overband magnetic separator Complete solution with discharge conveyor belt in any configuration. Our core competence lies in delivering exactly what the customer truly needs. We work together with our customers to develop customized, individual solutions and supply corresponding systems from our own production. Gijdpfjv Tdq Iox Af Uep Please feel free to contact us by phone to find the right solution for your application. Conveyor belt, conveyor system, discharge belts, belt conveyors, magnetic separators, overband magnetic separators, recycling, wood chips, plastics, metal-free, metal detection, neodymium, overband magnet, magnetic belt separator, lifting magnets, filter rods, magnetic grids, magnetic grate, metal separator, block magnet, filter systems All prices are net prices plus 19% VAT All information provided without guarantee, while stocks last!

Condition: new, Year of construction: 2025, functionality: fully functional, rotor diameter: 360 mm, power: 45 kW (61.18 HP), Material shredder 45KW Hopper opening: 1,030 x 1,235mm Rotor diameter 360mm Giodpfet Rivtjx Af Usp Star-delta start, automatic stop at idle speed - Hydraulic pusher equipped with pressure plates - Siemens SPS control system - Optional with control cabinet extension for discharge conveyor + overbelt magnetic separator Complete solution with discharge conveyor belt in any design. Our core competence lies in supplying the customer with exactly what he really needs. We work together with our customers to develop customized, individual solutions and supply corresponding systems from our own production. Please feel free to contact us by phone to find a suitable solution for your application. conveyor belt, conveyor belt system, discharge belts, belt conveyor, magnetic separator, overbelt magnetic separator, recycling, wood chips, plastic, metal-free metal detection, neodymium, overbelt magnet, magnetic belt separator, lifting magnets, filter bars, magnetic grid, magnetic grate, metal separator, block magnet, filter systems

Condition: as good as new (ex-display), Year of construction: 2024, Special price: €29,970 net A machine is currently available immediately. Giodpfogmh H Tsx Af Ujp The ideal machine for shredding voluminous, light aluminum chips or turnings. Not suitable for more solid aluminum parts. Includes: + Optimized cutting geometry + Adapted slide control + Load-dependent controlled hydraulic slide (which presses the chips against the cutting mechanism) Motor: 18.5 kW; 400 V - 50 Hz - 3 ph, Blade: 40x40mm, multi-rotatable, Rotor diameter: 260 mm, Control: Omron PLC, Cutter opening 600 x 800 mm, Funnel volume approx. 0.6 qbm, Hydraulically operated slider Sieve perforation of your choice (15 - 40mm) Suction nozzle Ø 160 mm Weight approx. 1,300 kg Dimensions (lxwxh) approx. 1737 x 1167 x 1650 mm The following options are available for an additional charge: - Raise the shredder by 30 cm (preparation for conveyor belt) +2,990 € net - Angle conveyor belt (discharge height approx. 220 cm) +9,770 € net - Overband magnet + €6,980 net - Control of conveyor belt and overband magnet + €2,750 net (Start and stop synchronized with the chipper) We would be happy to carry out a free test with your material. We invite you to come to us in Neckartailfingen. It is also possible for you to send us your material by freight forwarder and we will document the test with pictures and videos.

Condition: as good as new (ex-display), Demonstrator with 7 operating hours Another machine available immediately (ex works in Neckartailfingen) MRZ 830 Shredder Custom tariff number: 84659600 Feed opening 800 x 1000 mm Motor: 18.5/22 kW; 400 V - 50 Hz - 3 ph Blades: multi-rotatable Hydraulically operated slide gate Screen perforation of your choice (10 - 40 mm) Weight approx. 1,600 kg Dimensions (L x W x H) approx. 2,290 x 1,420 x 1,750 mm Gijdov Sqrpopfx Af Uep Turbo clutch Included as standard: - Automatic star/delta start-up - Fast hydraulics - Auto. OFF when the rotor is idle - Speed 70-90 rpm for high throughput - Cycle control to avoid idle times - Performance-enhancing step control of the hydraulic slide - Pertinax guides for the hydraulic slide - Vibration-damping machine feet - CE compliant . The shredder is designed for shredding natural wood, particle board, and MDF, as well as other materials after testing and approval by the manufacturer. Included: - Raise the shredder by 30 cm (prepared for conveyor belt) Additional shredder options: - Articulated conveyor belt + €8,770 net Horizontal section: 1,200 mm Rising section: 2,500 mm Angle: adjustable from 0-60 degrees Discharge height: approx. 2,000 mm + - 100 mm - Overbelt magnet + €6,780 net - Conveyor belt and overbelt magnet control + €2,750 net (Start and stop synchronized with the shredder) Raw material requirements: - The moisture content (dry) must be below 30% - Metals and mineral contaminants such as sand, stones, etc. lead to increased wear

Condition: as good as new (ex-display), Year of construction: 2023, Ideal for shredding polystyrene or similar materials Throughput depends heavily on the sieve and source material: - up to 60 kg / h for EPS with a 15 mm sieve *the coarser the sieve, the higher the throughput Motor 9.2 / 11 KW - 400 volts, stable steel construction, hardened cutting blades, sieve with interchangeable inserts, optionally (8), (10), 15, 22, 26, 30, 40, or 60 mm perforation with electric drive with star-delta switch Ue protection and 8 m supply line ready to plug in, Gijdpfeh S H T Uox Af Uop blow-out nozzle 150 mm, optionally for plastic or grain pipes, blow width approx. 12 m, chassis with 2 running wheels Ø 380 mm, and a swiveling support wheel Ø 125 mm, all Wheels with solid rubber tires, Dimensions approx. 1200 x 900 x 1270/1400 mm lxwxh Weight approx. 240 KG, Spare parts prices and options: 24 blades, hardened €9.90 each net 6 bolts €14.90 each net 1 sieve €475 each net Lid €290 each net

Condition: new, Year of construction: 2026, Single-shaft shredder MRZ 530 Included: + Profile rotor for increased throughput Options: Double knife row + €895 net Veneer and paper stripper + €970 net * recommended for extremely thin materials with a thickness less than 3 mm Our mütek single-shaft shredder MRZ 530 processes a wide variety of materials such as all types of wood residues, softwood, chipboard and MDF, pallets, construction timber, demolition wood, carpets, cables, paper, cardboard, and plastics. The machine is characterized by its robust design, ensuring consistent quality in continuous operation. We are pleased to offer you a free test with your material. You are welcome to visit us in Neckartailfingen for this purpose. Alternatively, you can send us your material via freight and we will document the test with pictures and videos. Machine data: Motor: 15 kW; 400 V - 50 Hz - 3 phase Knives: multiple reversible Rotor diameter: 260 mm Control: Siemens S7-1200 PLC Hopper (mm): 510 x 810 mm Hopper volume approx. 0.4 m³ Throughput: 1 - 5 hopper fillings/hour Hydraulically operated pusher Screen perforation as desired (10 - 40 mm) Extraction nozzle Ø 160 mm Weight approx. 1,000 kg Dimensions approx. 1550 x 1100 x 1640 mm Moisture content of raw material: must be below 30% a.d. Standard features included: • Fast hydraulics • Profile rotor • Control cabinet with Siemens PLC control • Automatic star-delta start • Automatic shut-off in case of rotor idle • Removable extraction channel • Speed 70 - 100 rpm for higher throughput • Cycle control to prevent idle time • Performance-enhancing step control for hydraulic pusher • Stable guides for hydraulic pusher Additional shredder options: - Raise shredder by 30 cm (preparation for conveyor belt) + €1,980 net - Angled conveyor belt + €8,770 net Horizontal section: 1200 mm Inclined section: 2500 mm Angle: adjustable 0-60 degrees Discharge height: approx. 2000 mm ± 100 mm - Overband magnet + €5,980 net - Control for conveyor belt and overband magnet + €2,750 net (start and stop synchronized with the shredder) Gsdpfx Afod Db N Ie Ueip Requirements for input/raw material: - Moisture content (a.d.) must be below 30% - Metals and mineral impurities such as sand, stones, etc., lead to increased wear

Condition: new, Year of construction: 2026, Delivery time approx. 3-4 months Giodpfod Dgw Ujx Af Uop MRZ 830 Shredder Custom tariff number: 84659600 Feed opening 800 x 1000 mm Motor: 18.5/22 kW; 400 V - 50 Hz - 3 ph Blades: multi-rotatable Hydraulically operated slider Screen perforation of your choice (10 - 40 mm) Suction nozzle Ø 200 mm Weight approx. 1,600 kg Dimensions (L x W x H) approx. 2,290 x 1,420 x 1,750 mm Turbo clutch Included as standard: - Automatic star/delta start-up - Fast hydraulics - Auto. OFF when the rotor is idle - Speed 70-90 rpm for high throughput - Cycle control to avoid idle times - Performance-enhancing step control of the hydraulic slide - Pertinax guides for the hydraulic slide - Vibration-damping machine feet - CE compliant . The shredder is designed for shredding natural wood, particle board, and MDF, as well as other materials after testing and approval by the manufacturer. Additional shredder options: - Raise shredder by 30 cm (prepared for conveyor belt) + €2,140 net - Articulated conveyor belt + €8,770 net Horizontal section: 1,200 mm Rising section: 2,500 mm Angle: adjustable from 0-60 degrees Discharge height: approx. 2,000 mm + - 100 mm - Overbelt magnet + €5,980 net - Conveyor belt and overbelt magnet control + €2,750 net (Start and stop synchronized with the shredder) Raw material requirements: - Moisture content (dry) must be below 30% - Installation temperature: temperature-controlled room at least +5°C - Metals and mineral contaminants such as sand, stones, etc. lead to increased wear

Condition: as good as new (ex-display), Year of construction: 2025, showroom machine machine available Advantages: + special rotor with reduced knife protrusion + Motor 22 kW Giededv Eu Hopfx Af Uop + effective square knife * for pallets: up to 10 pallets per hour * depending on the sieve and material. With smaller residual wood, significantly more. Engine: 22 kW; 400 V - 50 Hz - 3 ph, Sieve: 15/20 mm hydraulically operated slide Current screen perforation (15/20 mm) * can be exchanged Extraction nozzle Ø 200 mm. Feed opening 1000x1000 mm Dimensions: 2000x1800x1645mm Example image above: The color of the system may vary Weight: 1920 kg. Included as standard: - Control cabinet with PLC control - automatic star / delta start - fast hydraulics - automobile. OFF when the rotor is idling - Speed ​​70-90 rpm for high throughput - cycle control to avoid idle times, - performance-increasing step control of the hydraulic slide, - Pertinax guides for hydraulic slides, - vibration-damping machine feet, - CE conform. The following options are available at an additional cost: - Additional row of knives + € 2,790 - segment bottom + € 6,890 (recommended for materials with a wall thickness thinner than 3 mm) - Special K-rotor storage + € 3,480 If necessary, consider shredding plastic with sieves smaller than 15 mm or with a lot of fines. If the bearings are lubricated with grease every approx. 4 weeks in operation, this is not necessary) - Raise the shredder by 30 cm (preparation for conveyor belt) + € 2.480 net - Angled conveyor belt (discharge height approx. 220 cm) + € 12.980 net - Overbelt magnet + € 5.980 net - Control conveyor belt and overbelt magnet + € 2.750 net (Start and stop synchronized with the hacker) - Exhibition hopper 1500x1500 mm + € 3.480 net Requirements for the raw material: - The moisture content (atro) must be below 30% - The loading must be free of metals and mineral impurities. This can result in damage to the tools and / or increased wear

Condition: good (used), 📄 Technical Data: Kubria F/M 90/S Feature / Parameter Value / Information Application Area Secondary and tertiary crushing of hard rocks (e.g. granite, basalt, gneiss), ore, limestone, cement raw materials, etc. Crushing Concept Cone crusher: material is crushed by compression between a fixed crushing ring and a rotating crushing cone. Cone Diameter (bottom cone / mantle) 900 mm Maximum Feed Piece Size up to 150 mm edge length Closed Side Setting (CSS) 8 – 35 mm Feed Opening (max.) max. 180 mm (feed opening “f”) Final Product / Grain Sizes (depending on configuration) e.g. 0–16 mm, 0–22 mm, 0–32 mm Gedpfx Afoxzk Urs Ujip Throughput Capacity (depending on configuration / material / setting) up to approx. 90 t/h (fine), up to approx. 110 t/h (medium), up to approx. 140 t/h (coarse / with larger screen or setting range) Main Dimensions (L × W × H) 1,960 mm × 1,550 mm × 2,460 mm Total Weight (without drive, electrics, hydraulics, control system) approximately 10 t Drive V-belt drive

Condition: repair required (used), Year of construction: 2000, operating hours: 10 h, functionality: not functional, Place: Austria Gisdpfxoxy I I Te Af Ujp Available immediately

Condition: ready for operation (used), Year of construction: 2008, operating hours: 4,308 h, functionality: fully functional, Force Presscylinder: 6000 KN Steel, Gush: 16 to/h Aluminium: 6-8 to/h Driving Power: 2x22 kW Arrangement Surface 7,1x3,3 Gedpjxuqv Nofx Af Ujip Machnie weight: 51 to Place: Austria Available immediately

Condition: excellent (used), Year of construction: 2015, Granulator / Knife mill brand INAN TECH Giodpfx Afexgfqfo Uep Model: IM38/100 Rotor length: 1000 mm Rotor diameter: 380 mm Automatic waste feeding

Condition: new, Year of construction: 2025, Set of jaws for Metso LT120, QUARRY TOOTH Fixed jaw MM0521203 18%Mn2%Cr - 2120 kg Swing jaw MM0521201 18%Mn2%Cr - 1875 kg Very good quality castings Gjdpfx Ajpit Rbof Usip ALL CASTING CHECKED WITH SPECTROMETER, TO PROOF BEST QUALITY Price for set EXW Poland, worldwide shipping can be arrange

Condition: new, Year of construction: 2025, Fits to following machines: Powerscreen Warrior 1400, Warrior 1800, Chieftain 2100 Gsdpfsigvctjx Af Uoip Gear triple pump X1A504650335033/124003/1C we are polish distribiutor of David Brwon Hydreco original genuine new pumps. All Powerscreen pumps on stock. Pump designed for Powerscreen Warrior 1400, Warrior 1800, Chieftain 2100

Condition: new, Year of construction: 2025, Set of cones(concave + mantle) Maxtrak 1000 Medium Coarse - very good quality. 22%Mn, with SPECTROMETER CERTIFICATE, highest quality on market! Gedeigvfvspfx Af Uoip Parts number: 603/9052-22 MC + 603/9106

Condition: new, Year of construction: 2025, Set of blow bars martensitic with double layer of ceramic for Metso 1213 crusher. We can also offer high chrome with ceramic for this machine All casting from EU foundries, best quality on the market Giedpfx Aoihfc Sjf Uep We can also offer blow bars for all other machines like Tesab, Pegson, Rubblemaster, Hartl and many more

Condition: new, Year of construction: 2025, Set of jaws for Extec C10 - Heavy Duty version with big tooth(50 mm tooth high) J692HDE, J693HDE Gisdpeigvc Tjfx Af Usp Fixed jaw 18%Mn2%Cr - 870 kg Swing jaw 18%Mn2%Cr - 610 kg Very good quality castings Price for set EXW Poland, worldwide shipping can be arrange

Condition: used, inlet cross section: 2500 x 1700 mm Drive: 160 kW rotor flight circle: 670 mm Gedpobq Su Nefx Af Ujip Discharge of contaminants: hydraulically pre-stressed and openable flaps for discharge of contaminants rotor execution: 14 pcs. positive cutting plates 120x120x55 mm on tool holders counter knife: with cutting gap adjustment Feeding device: hydraulic hopper: 1.700 mm high, with revolving pipe line tube machine weight: approx. 24.000 kg

Condition: new, Hopper opening: 2.500 x 2.000 mm Godpfx Afjbq St Hj Usip Rotors: 2 pcs. Rotor flight circle: 580 mm each Rotor design: 5 and 6 cutting teeth Drive: 2 x 90 kW with planetary gears Hydraulic screen flap interlock for the discharge of contaminants Weight: approx. 18.500 kg