Cast Iron Breaker

ATM Recyclingsystems Gussbrecher GBP 120/400

Condition: used, Year of construction: 1985, functionality: fully functional, travel distance X-axis: 4,700 mm, travel distance Y-axis: 2,250 mm, travel distance Z-axis: 1,300 mm, total width: 3,000 mm, total length: 8,710 mm, total height: 5,250 mm, spindle diameter: 130 mm, table load: 16,000 kg, table length: 2,200 mm, table width: 2,200 mm, overall weight: 40,000 kg, Accessories: 2 different heads Njdpfx Ahew Hr Hpe Hjwb 1 faceplate

Condition: ready for operation (used), technical Details: Speed - 130m/min. , Year - 2006, run out table - 6 m Wire diameter range 4-12 mm Nsdpfx Ahjtndgpe Hewb

Condition: new, GENERAL Typical of the single-shaft shredders in the ZIS series are their voluminous grinding chambers, the stability of which is ensured by their welded steel construction. The rotor diameter is also generously dimensioned at 457 mm. The rotor widths are 1200, 1500 and 2000 mm. The ZIS series retains all the advantages of the ZSS series: drive via an oversized gearbox, reversible blades, screwed blade holders, robust, external bearings, hydraulic screen basket, easy handling and technically sophisticated control systems. APPLICATIONS The ZIS series was primarily developed for large-volume hollow bodies: IBCs, garbage cans, pallets, rain barrels, etc. The machine can also be used universally for countless applications in the plastics and wood industries. Like all Zerma shredders, the machines in the ZIS series can also be equipped with various wear options. ADVANTAGES 35% larger grinding chamber volume compared to the ZSS series Nwjdpfjghgdvox Ah Hob Internal hydraulic slide Increased slide speed in the return movement Compact dimensions Knife holders screwed into rotor pockets

Condition: used, Year of construction: 1977, pressure 250 t stroke 40 - 190 mm Nwedpfxovuuaio Ah Heb no. of strokes 40 /min throat 500 mm passage to the back 1050 mm dayligth 615 mm table surface area 1380 x 880 mm hole in the table 450 mm table height over floor 800 mm ram surface 1200 x 800 mm ram adjustment 125 mm power requirement 22,0 kW Weight 24,0 t dimensions of the machine ca. 2,0 x 2,5 x 3,95 m x m x m permitted for manual loading according to the German Safety Regulations (UVV) with motor, pneumatic clutch/brake combination, hydraulic overload protection in ram, pneumatic counterbalance in ram, motoric ram adjustment, manual stroke adjustment, motoric centralized lubrication, bolster plate, two-hand operation

Condition: good (used), Year of construction: 1993, operating hours: 604 h, Generator is in good condition, located on stock. Nwjdpfxevkvvqe Ah Hsb Technical specification shown on plate.

Condition: like new (used), Year of construction: 1991, functionality: fully functional, overall weight: 35,000 kg, pressing force: 250 t, type of input current: three-phase, power: 30 kW (40.79 HP), punching force: 250 t, input voltage: 200 V, Equipment: documentation/manual, safety light barrier, AIDA NC2-250(1) 250t eccentric press in excellent condition /ctA2/ Manufacturer: AIDA Type: NC2-250(1) Push force: 160t Year of manufacture: approx. 1991 Stroke length: 170mm Distance above table: (adjustable) 280-400mm Table size: 2700x760mm Bear size: 2100x700mm Electrical power: 3x200V(!!), 30kW - Japanese standard Net weight: 35000kg Size: 2760x2800x3980mm Nwsdpfx Aheu Dxb Te Hob Automatic greasing system. Automatic cutting oil dosing - RAZIOL EST-02 Optionally with disc winder and straightener.

Condition: used, gearing type: other, mileage: 1,001 km, driver cabin: other, Vehicle location: Bovenden, Njdeth T Uqspfx Ah Hjwb Body: MB, MAN, IVECO, VOLVO, SCANIA etc. used rear axles, 50x available! various used rear axles for 300,- to 1.500,- EUR per piece depending on condition ACCESSORY INFORMATION WITHOUT WARRANTY, subject to alterations, prior sale and errors excepted! - .

Year of construction: 2025, condition: new, machine/vehicle number: Neumaschine auf Bestellung, Description: - Screen deck system consisting of 1 deck for screening minerals from pre-crushed material Input grain size max.: 0-100 mm - Screen cut grain size 0-30 mm - Capacity approx. 60 m³/h (depending on material) - Material is separated into 2 fractions 0-30 mm and oversize grain - To be mounted on the customer's own impact walls or base frame Technical data:  Screen deck: length = 3,120 mm; width = 1,400 mm o External dimensions: length = 3,300 mm width = 2,050 mm o Screen area 4.6 m², number of shafts 24 pieces o Drive 2 x 4.0 kW geared motors o Screen body polyurethane (star screen) D 166 / 12 fingers o Screen shafts as plug-in system (easy and cost-effective adaptation to other grain sizes possible) o External lubrication of the bearings, optional central lubrication possible for an extra charge  Color: black RAL 9017 / green RAL 6018 or according to customer specification ( against surcharge) Nwjdpfx Ahod Rbmke Hob Delivery time_ approx. 20 weeks

Condition: used, Technical details: grinding length: 12000 mm grinding width: 2800 mm workpiece height: 2510 mm max. workpiece weight: 24.000 kg table surface area: 11990 x 2500 mm distance between columns: 2820 mm cross rail adjustment: 2510 mm table feed: 1 - 40 m/min total power requirement: 110 kW Nwsdpfxowc A Sne Ah Hob weight of the machine ca.: 151 t dimensions of the machine ca.: 32,5 x 9 x 6,73 m .....machine is in top condition for high precision work! with CNC SIEMENS 840 D 1 universal grinding head, 22 kW swivelling of the grinding spindle +/-110° grinding wheel dimension 700 x 130 mm vertical stroke 1000 mm with dressing unit 1 surface grinding head, 30 kW grinding wheel dimension 600 x 150 mm vertical stroke 230 mm with dressing unit coolant and filtering unit diverse grinding wheel flanges *

Condition: good (used), Year of construction: 2001, functionality: fully functional, Grinding wheel 508x254 (305) mm, regulating wheel 330x254 (305) mm, regulating wheel speed 0-115 rpm, grinding wheel rotation speed 45 m/sec, grinding diameter 2-150 mm, grinding wheel drive 45 kW, machine weight 6.5 tons, space requirement approx. 3.0x1.5 m The machine will be equipped with a new Siemens S7 control system with new control panel, dressing quill SS electrically controlled via servo motor. Machine will be completely checked, defective parts repaired or replaced. Nsdpeuy Ifgofx Ah Howb Various options possible (KM system, infeed/outfeed, workpiece rulers etc.)