Screw compressor

Mark RF 10 YD

Year of construction: 1998, condition: used, Used machine Year of manufacture: 1998 Equipment and technical data: - Max. operating overpressure: 10 bar - Compressed air tank: 250 l - Maximum sound pressure level: 76 dB(A) - Theoretical intake volume: 630 l/min - Effective delivery rate at 6 bar: 440 l/min - Number of cylinders: 2 - Speed: 1450 rpm - Oil quantity: 1.2 l - Oil refill quantity: 0.22 l - Motor: 3 kW / 400 V - Max. switching frequency: 20/h - Control: direct start Rodpfx Aoyyfkhoahow Weight: 240 kg Availability: short-term Location: 63934 Röllbach

Year of construction: 2011, condition: ready for operation (used), X-axis: 300mm, y-axis: 620mm, z-axis: 400mm, positioning accuracy: ±0.005 inch, repetition accuracy: 0.005 inch, rapid traverse: 25m/min, feed rate: 10m/min, air pressure: 6kg/cm², air consumption: 400l, pump motor: 30W, delivery rate: 2.2cm³/s, pump pressure: 8kg/cm², tank capacity: 2l, pump electrics: 220V/ 3PH/ 1.2A, max. delivery rate: 130l/min, control: Heidenhain TNC 620, connected load: 15kVA, length: 3000mm, width: 2050mm, height: 3020mm, weight: 3020kg. max. flow rate: 130l/min, control: Heidenhain TNC 620, connected load: 15kVA, length: 2984mm, width: 2050mm, height: 2420mm, weight: 3020kg. Operating hours control: 22,261h, machine: 22,414h, programme: 10,507h, spindle: 7695h. Fully functional, spindle was recently replaced, the built-in oil skimmer in the cooling water tank is not functional. With documentation. On-site inspection is possible. Redpfx Aajwc A Rkshjw

Condition: ready for operation (used), Year of construction: 2016, travel distance X-axis: 4,006 mm, travel distance Y-axis: 305 mm, travel distance Z-axis: 356 mm, controller manufacturer: HAAS, spindle speed (max.): 6,000 rpm, number of axes: 4, This 4-axis HAAS Mini Mill was manufactured in 2015. It features a maximum spindle speed of 6,000 rpm and a factory-raised Z-axis providing additional clearance for 4th axis applications. The machine has an X-axis travel of 406 mm, Y-axis travel of 305 mm, and Z-axis travel of 456 mm. If you are looking to get high-quality machining capabilities, consider the HAAS Mini Mill vertical machining centre we have for sale. Contact us for further details. • Table size: approx. 914 × 305 mm • Machine options/features: • 4th axis drive/preparation • Rigid tapping • Upgraded coolant pump Rodpfx Aaoy Tamwohow • Factory raised Z-axis by +100 mm (additional clearance for 4th-axis applications) Additional equipment • Haas HRT160 simultaneous 4th axis (rotary table) • 4x LANG MakroGrip 77 vises • 4-axis fixture/cradle for the 4 vises Technical Specification Taper Size BT 40

Condition: ready for operation (used), Year of construction: 2013, travel distance X-axis: 508 mm, travel distance Y-axis: 406 mm, travel distance Z-axis: 508 mm, controller manufacturer: HAAS, total height: 2,667 mm, table load: 1,361 kg, overall weight: 3,300 kg, spindle speed (max.): 8,100 rpm, spindle motor power: 22,400 W, number of slots in tool magazine: 20, tool weight: 5,400 g, number of axes: 3, This 3-axis HAAS VF-1 vertical machining centre was manufactured in 2013. It features a HAAS control, a spindle power of 22.4 kW, and a spindle speed of 8100 RPM. The machine includes a carousel-type tool magazine with 20 positions and a coolant capacity of 208 liters. If you are looking to get high-quality milling capabilities, consider the HAAS VF-1 machine we have for sale. Contact us for more information. • Table: Length 660 mm; Width 356 mm • Tool magazine: Carousel, 20 positions • Coolant capacity: 208 l • Set of tool holders included Rodpfx Aaoygld Hshjw Dimensions Machine Depth 2489 mm Technical Specification Taper Size BT 40

Condition: ready for operation (used), Year of construction: 2001, operating hours: 14,336 h, controller manufacturer: HAAS, controller model: n/a, total height: 1,473 mm, table load: 1,350 kg, number of axes: 3, This 3-axis HAAS VCE 550 was manufactured in 2001. It features a work spindle with a maximum speed of 7500 rpm, expandable to 10,000 rpm with an optional dual drive. The working area includes dimensions of 508 x 406 x 508 mm, and the table can support up to 1350 kg. Consider the opportunity to buy this HAAS VCE 550 vertical machining centre. Contact us for more information about this machine. • Clamping surface: 660 x 356 mm • T-slot width: 14 mm • T-slot spacing: 125 mm • Tool change operations: 321250 timesMachine still under power Additional equipment • Note: 4th axis is available but defective; power unit for AC servo motor for HRT160 must be replaced. Rodpfx Aaex D Eg Ujhew Dimensions Machine Depth 2357 mm Technical Specification Through-spindle Coolant Yes

Condition: excellent (used), Year of construction: 2006, HAAS VF-2SS vertical machining center, 4.axis Year: 2006 Rsdpfezfyarjx Aahew Traverses X Y Z: 762 x 508x 508 Table 914 x 457mm Table load capacity: 1360 kgs Spindle speed 0 – 12000rpm Spindle taper SK40 Tool magazine capacity 24 positions, arm type Machine weight: 3600 kgs Accessories/options: - through spindle Coolant - swarf auger - Renishaw tool setter, TS27 - dividing/indexer, 4.axis unit

Condition: used, Year of construction: 1990, Technical details: x-travel: 800 mm y-travel: 410 mm z-travel: 510 mm control: Fanuc 10 MA rapid travel x/y/z: 20/20/15 mm/min table surface area: 1100 x 450 mm tool taper: BT 40 tool magazin:: 30 BT 40 max. tool length: 250 mm max. tool weight: 8 kg power requirement: 7,5/5,5 kW turning speed range: 6000 1/min weight of the machine ca.: 6,3 t Under offer is a complete CNC tool shop, whioch will be given up due to old age of owner. The Mori Seiki is still highly accurate. All existing tool holders, tools, drills, etc. come with the machine. All measuring devices also come with the machine. Upon request orders for parts to be made can be passed on to new owner. Rodpfxey S T T Uo Aahow This is a low cost all inclusive opportunity for a "Startup" *

Condition: used, Year of construction: 2002, x-travel 600 mm y-travel 410 mm z-travel 520 mm Spindle Speed 8000 U/min. table length 840 mm table width 420 mm engine output 15 kW tool change unit 16 control SIEMENS 810 shopmill rapid traverse X- and Y-axis 36 m/min rapid traverse Z-axis 20 m/min taper ISO SK 40 dimensions 2200x2300x2300 mm weight 2500 kg Youtube-Video-Links: Rjdpfxsyv Ngxj Aahjw ?v=lGP4FX8j_Gg ?v=WSiuzCJw6G4

Condition: good (used), Year of construction: 2006, Switch-on hours (date 18. May 2026): 28.970 h Technical details turning diameter 570 mm turning length 1000 mm control WEILER D3 swing diameter over slide rest 325 mm Swing in gap 600 mm length of gap 140 mm spindle bore 83 mm spindle diameter in front bearing 120 mm face stroke 340 mm longitudinal stroke 1100 mm workpiece weight max. 1200 kg spindle turning speed - stepless 1 - 2500 rpm transmission ratio 2 Redpezcmccjfx Aahew rapid travel - longitudinal/face 10 / 5 m/min main drive motor (60/100 % ED) 20 / 17 kW tailstock quill diameter 80 mm tailstock quill stroke 200 mm tailstock quill taper MT 5 weight of the machine ca. 3,8 t dimensions of the machine ca. 2,95 x 1,90 x 1,82 m * Control WEILER D3 * Chip conveyor * 4-station toolholder PARAT with several inserts * 3-jaw chuck SCHUNK ROTA-S plus 315-92

Condition: good (used), Year of construction: 2015, machine/vehicle number: 1464, Offer 26166 - Screw compressor Manufacturer: KAESER, Type: SK 22 Machine No.: 1464, Year of manufacture: 2015 - SIGMA Control system - Operating hours: approx. 15,933 h - Load hours: approx. 7,654 h - Operating pressure: 11 bar - Delivery rate: 1.67 m³/min - Drive: 400 V / 11 kW - Space requirement: approx. W 780 x H 1030 x D 850 mm - Weight: approx. 300 kg - Compressed air tank Redozg Uh Tspfx Aahjw Manufacturer: OKS, Type: 500L Machine No.: 462811, Year of manufacture: 1998 - Tank volume: 500 L - Compressed air dryer Manufacturer: JÄGER, Type: ERD 150 Machine No.: 1268, Year of manufacture: 2011 - Refrigerant: R134 A - Cooling air flow: 150 m³/h - Oil-water separator