Used CNC turning and milling centers for sale (666)

Condition: good (used), Year of construction: 2006, DOOSAN DAEWOO PUMA 300 LMB 12 Inch Cnc Lathe Fgelevalzhjq Shp Ieb Yom: 2006 C-axis Length 1200 mm Drilling diameter 450mm Spindel Diameter 102 mm Fanuc Control Unit 18.5/22 kW 3500 rpm C axis 4000rpm Machine weight 6700kg

Condition: ready for operation (used), Year of construction: 2002, Functionality: fully functional, machine/vehicle number: 02260001501, turning length: 600 mm, turning diameter over cross slide: 324 mm, spindle speed (max.): 5,000 rpm, travel distance X-axis: 185 mm, travel distance Z-axis: 635 mm, indexing of C-axis: 0.025 °, TECHNICAL DETAILS Control system: SIEMENS Max. circulation diameter: 680 mm Circulation diameter via X-guide: 565 mm Max. turning diameter: 324 mm Folqsu T Hmms Shp Iogb Max. turning length: 600 mm Main spindle Spindle head diameter (flat flange): 170h5 mm Max. bar diameter: 65 mm Spindle diameter (front bearing): 120 mm Spindle bore: 79 mm Drive power S1, 100% ED: 25 kW Speed range: up to max. 5,000 rpm Torque S1, 100% ED: 270 Nm Buckling speed: 900 rpm C-axis (main spindle) Speed: 250 rpm Holding torque: 200 Nm Pitch accuracy: 0.025° Counter spindle Spindle head diameter (flat flange): 140h5 mm Max. bar diameter: 42 mm Spindle diameter (front bearing): 90 mm Spindle bore: 57 mm Drive power S1, 100% ED: 25 kW Speed range: up to max. 7,000 rpm Torque S1, 100% ED: 160 Nm Buckling speed: 1,500 rpm C-axis (counter spindle) Speed: 250 rpm Holding torque: 120 Nm Pitch accuracy: 0.025° Cross slide (X/Y/Z) Face travel (X): 185 mm Longitudinal travel (Z): 635 mm Vertical travel (Y): +40 mm Rapid traverse speed (X/Y/Z): 60/15/45 m/min Feed force (X/Y/Z): 3.5/7/7 kN Ball screw (Y): 40x5 mm Ball screw (Z): 40x15 mm Counter spindle (Z2) Longitudinal travel: 666 mm Input speed: 45 m/min Ball screw: 40x15 mm Tool carrier Driven tools: 12 Shank diameter (VDI 69880): 40 mm Max. power: 9.4 kW Torque: 20 Nm Speed range: up to max. 4,500 rpm MACHINE DETAILS hydraulic system Capacity: 10 l Pump output: 2.2 kW Max. pressure: 80 bar Clamping device and tailstock pressure: 10-60 bar Coolant device Capacity: 210 l Pump capacity: 1.7 kW Delivery rate (at 6 bar): 20 l/min Electrical power requirement Connected load: 50 kVA Operating voltage: 400 V Frequency: 50 Hz Fuse protection: 80 A Voltage fluctuation: +6%/-10% Bar loader Manufacturer: Breuning Notes - The tools shown in the turret are not part of the auction. - The collets for the collet chuck are included.

Condition: excellent (used), Year of construction: 1997, operating hours: 64,905 h, Functionality: fully functional, machine/vehicle number: 501637, bar diameter: 65 mm, number of slots in tool magazine: 16, Equipment: documentation/manual, No minimum price - guaranteed sale at the highest bid! TECHNICAL DETAILS Control: Sinumerik 840C Bar feeder: Irco RBK 7212, year of manufacture 1999 Bar length: 1 m Bar diameter: 65 mm Turret and spindle Turret: 2 pieces, 8 places each, VDI30, 4 driven tools each Fgeleu Tc Dzoq Shp Iob Main spindle: Hainbuch chuck Counter spindle: 3-jaw chuck MACHINE DETAILS Operating hours: 64,905 h Dimensions incl. bar loader and chip conveyor (LBH): approx. 6 × 2 × 2 m Weight: approx. 6.5 t Operating voltage: 50 Hz, 400 V EQUIPMENT - Fixture for finished parts - Cooling system - Chip conveyor - Documentation - Various guide tubes for the bar feeder - including 2 tool holders

Condition: used, Year of construction: 2000, Functionality: fully functional, machine/vehicle number: 500358, turning length: 1,250 mm, turning diameter: 300 mm, spindle motor power: 43 W, spindle speed (max.): 5,000 rpm, spindle bore: 65 mm, INDEX G300L with Promot gantry loader. Machine is still in production and under power. The promot loader has 2 rotary indexing belts with approx. 30 pallet spaces each. The machine is equipped with high-pressure cooling lubricant (40 bar), paper belt filter and tool changer. For further information please contact us by mail. Fslq Shpju Nmq Hj Ijgb

Condition: good (used), Year of construction: 2012, Functionality: unexamined, machine/vehicle number: CB010906, bar passage: 36 mm, overall weight: 3,800 kg, 5 axis Cnc lathe with moving bushing - bar capacity 36 mm - Top Automazioni RECORD 335 barfeed new in 2012 - Syntec Control Fgslju Iafhsq Shp Isb

Condition: good (used), Year of construction: 2001, Lathe Mori Seiki SL-204 MC year of construction 2001 Foljup T Rfoq Shp Iogb Control MSG-805 Travels: X 235 mm Z 520 mm max. diameter 390 mm turning length 507 mm top condition

Condition: like new (used), Year of construction: 2023, operating hours: 300 h, Functionality: fully functional, turning length: 1,000 mm, Mint machine with tool holder TOP Fgolqeu Ez Npe Shp Isb

Condition: good (used), Year of construction: 1999, operating hours: 140,810 h, Functionality: fully functional, Gildemeister MF SPRINT 65 Machine no.: 07810000801 Control system: SINUMERIK 840 C Year of construction: 1999 Operating hours: 140810 Irco ILS short bar loader Annual maintenance by DMG, last maintenance 08.07.2024: Linear guide, axial bearing, KGT and adjusting nut of the X1 axis replaced Linear guide, axial bearing, KGT and adjusting nut of the Z1 axis replaced Linear guide, axial bearing, KGT and adjusting nut of the X2 axis replaced Linear guide, axial bearing, KGT and adjusting nut of the Z2 axis replaced. Replacement of all sliding plate wipers. Safety window of the work area door replaced. Replacement of all feed toothed belts and the toothed belts for the counter spindle drive Tool drive 1 dismantled, disassembled, cleaned and re-stored. Filter mat of the main spindle fan replaced, coolant valves of turret 1 and 2 replaced. Chuck of the main spindle and counter spindle dismantled and cleaned. Machine geometry and working area remeasured and adjusted. Hydraulic filter cartridges replaced. Pneumatic filter replaced. Technical data see appendix Machine can be inspected under power Price 35.000 € VHB The offer is subject to change and non-binding, changes and errors in the technical data or the equipment, as well as prior sale reserved Used machines are purchased as seen, without warranty claims. . Delivery ex works excluding packaging and insurance, unless otherwise agreed. Fjlq Sju Dg Ubjhp Ijgb The price does not include statutory value added tax. As is usual with used machines, payment is made before loading.

Condition: excellent (used), Year of construction: 2016, Takisawa TMM 250 3 turn-mill center, year 2016, Fanuc turning length:1300 Turning diameter: 350 mm Spindle speed (max.): 4000 1/min 9 axes 2 x spindles 2 x C-axis Swing diameter 780 mm Turning diameter max. 350 mm Turning length max. 1,300 mm Chuck diameter left 250 mm Chuck diameter right 200 mm Upper tool carrier with Y-axis 260 mm and B-axis 230° / +/- 115° Complete with 30-position tool changer Lower tool carrier 15-position turret - all positions driven Complete simultaneous 5-axis machining with turning/milling support. Tool changer with 30 tool positions Fgelq Ssrt Ip Njhp Ijb Workpiece magazine, to the right of the machine, with gantry handling Driven tools on the turret. C-axis for left and right spindle Chip conveyor Internal coolant supply through milling spindle 20 bar Due to high office costs (customs regulations) we do not deliver to Turkey Turkey, Iran, Russia and Belarus.

Condition: ready for operation (used), Year of construction: 2006, 2 machines one 2003 other 2006 Pakert price 39.900 Rotation diameter 320 mm Chuck diameter 203 mm Machining diameter 260 - 320 mm Machining length 180 - 530 mm Bar diameter 51 mm Spindle bore 61 mm Spindle speed 35 - 5,000 rpm Number of holders in the turret head 12 x 2 MATRIX 2 control unit Travel - x 240 mm Travel - y 100 [+/-50] mm Travel - z1 440 mm Travel - z2 495 mm Fjlq Sot D Rc Ujhp Iegb CNC turning and milling center | MAZAK - MULTIPLEX 6200 IIY equipped with gantry loader

Condition: good (used), Year of construction: 2019, Okuma LT 2000 2T2MY, Year of manufacture 2019, Control unit OSP - P 300 LA, max. workpiece Ø chuck part 170 mm, max. workpiece length chuck part 110 mm, max. workpiece Ø shaft part 60 mm, max. workpiece length shaft part 350 mm, 2 turrets, 16 positions, all stations driven, 2 x Y axis, counter spindle, 2 x C axis, Each turret with 1 coolant pump, High pressure cooling 20 bar, chip conveyor, Spindle speed up to 5,000 rpm, tools driven up to 6,000 rpm, prepared for automation, electr. door, interface, Fjlqjugtwfs Shp Isgb MACHINE WITHOUT AUTOMATION

Condition: excellent (used), Year of construction: 2008, operating hours: 35,598 h, Functionality: fully functional, machine/vehicle number: 07400004031, spindle motor power: 20 W, spindle speed (min.): 3,250 rpm, spindle speed (max.): 5,000 rpm, bar passage: 90 mm, overall weight: 10,000 kg, bar capacity 90 mm - 2x12 position driven turrets - Y axis in upper turret - tail stock - Siemens 840D power line Control - machine in perfect condition that has always worked with oli - very very well tooled - Lns Sprint S2 barfeed. Felq Sjuyx Hzjhp Iogb

Condition: excellent (used), Year of construction: 2015, operating hours: 4,162 h, Functionality: fully functional, turning diameter: 100 mm, spindle speed (max.): 7,000 rpm, bar diameter: 36 mm, TECHNICAL DETAILS Number of axes: 10 (X1 / Z1 / Y1 / C1 / X2 / Z2 / Y2 / C2 / X3 / Z3) Number of spindles: 2 Number of turrets: 2 Main spindle Spindle nose: A2-5 Spindle drive power: 11 kW Spindle speed: 7,000 rpm Max. Bar diameter: 36 mm Max. Diameter of the main spindle chuck: 100 mm Min. resolution C-axis: 0.001° Counter spindle Spindle nose: A2-5 Spindle drive power: 11 kW Spindle speed: 7,000 rpm Max. Bar diameter: 36 mm Max. machinable diameter: 100 mm Minimum C-axis resolution: 0.001° Turret head 1 Number of positions: 12 Number of motorized positions: 12 Speed of the driven tools: 6,000 rpm Power of the driven tools: 4.6 kW Turret head 2 Number of positions: 12 Number of motorized positions: 12 Speed of the driven tools: 6,000 rpm Power of the driven tools: 4.6 kW MACHINE DETAILS Supply voltage: 400 V Space requirement: 3,682 x 1,430 mm Height of the machine: 1,900 mm Weight of the machine: 5,000 kg Switch-on time: 6,602 h Operating time: 4,162 h EQUIPMENT Fgjlqeuv Eh Rj Shp Isb - Coolant tank (with pumps) - Internal coolant supply (IKZ) - Chip conveyor - Touch probe tool: Renishaw, incl. tactile measuring probe - Part removal - Counter spindle prepared for pneumatic chuck - Optional: It is possible to purchase a large number of clamping devices as well as fixed and driven tool holders in high quality. (to be seen on the last pictures)

Condition: ready for operation (used), Year of construction: 2006, operating hours: 52,455 h, Functionality: fully functional, machine/vehicle number: 2501-0188, turning length: 600 mm, turning diameter over cross slide: 140 mm, turning diameter: 300 mm, spindle motor power: 25,000 W, spindle speed (min.): 5,000 rpm, spindle speed (max.): 5,000 rpm, travel distance Z-axis: 900 mm, rapid traverse X-axis: 3 m/min, rapid traverse Y-axis: 3 m/min, rapid traverse Z-axis: 3 m/min, rotational speed (max.): 4,000 rpm, rotational speed (min.): 4,000 rpm, torque: 239 Nm, bar passage: 80 mm, feed rate X-axis: 165 m/min, feed rate Y-axis: 165 m/min, feed rate Z-axis: 220 m/min, overall weight: 10,500 kg, Equipment: documentation/manual, Machine is still in use and can be seen working at VOVU Machining in Uden. In total there are 6 identical machines here. Fanuc 310is controller Feljur Hfzoq Shp Iegb

Condition: good (used), Year of construction: 1995, Automatic lathe INDEX G200, no. 510268, year 1995, control SIEMENS Sinumerik with filter system and bar feeder IEMCA TAL/Auto 65/32, no. 88071908 Fjlq Ssunwiiehp Iegb

Condition: ready for operation (used), Year of construction: 2014, operating hours: 9,298 h, Functionality: limited functionality, turning length: 800 mm, turning diameter: 500 mm, spindle speed (max.): 12,000 rpm, travel distance X-axis: 480 mm, travel distance Y-axis: 200 mm, travel distance Z-axis: 750 mm, Tools in the pictures are included in the scope of delivery! Spindle condition: Spindle makes quiet noises and should therefore be replaced soon. The life expectancy of the spindle confirms this. The clamping ring on the milling spindle is defective. The spindle is jammed, but sporadically no longer loosens. When the error is acknowledged, it continues to run. Production is therefore still possible. TECHNICAL DETAILS (data according to manufacturer's brochure) Turning diameter: 500 mm Workpiece length machinable: 800 mm Center distance: 1,020 mm Travel X / Y / Z: 480 / 200 / 750 mm B-axis: ±110° Milling spindle speed: 12,000 rpm Tool holder: HSK-A63 Drive power: 40% ED: 22 kW Torque: 120 Nm Tool positions: 80 positions Tool diameter (free/occupied neighboring position): 120 / 80 mm Tool length: 300 mm Tool weight: 12 kg Chip-to-chip time: 8.5 s Main spindle speed: 5,000 rpm Indexing: 0.001° Drive power: 40% ED: 34 kW Folq Shpjum U Dzo Iogb Torque: 380 Nm Spindle diameter in front bearing: 130 mm Chuck diameter: 315 mm Counter spindle speed: 6,000 rpm Indexing: 0.001° Drive power: 40% ED: 27 kW Torque: 170 Nm Spindle diameter in front bearing: 100 mm Chuck diameter: 210 mm Tailstock Stroke: 800 mm Force: 8.0 kN MACHINE DETAILS Dimensions: 4,957 x 2,910 x 2,300 mm Machine weight: 10,000 kg Switch-on time: 21,178 h Spindle time: 9,298 h

Condition: good (used), Year of construction: 2020, DMG Mori NLX 4000, Year of manufacture 2020, Fslsumuvdjq Shp Iogb Control M 730 UM CELOS , Travel X/Z 365/1685 mm, Y axis travel +/- 60 mm, Chuck Ø 530 mm, 12-station turret, steady rest, programmable tailstock, chip conveyor, dir measuring systems X/Z, tools, C axis C axis, coolant cooler, oil separator, spindle bore 185 mm,

Condition: good (used), Year of construction: 2003, operating hours: 44,534 h, Functionality: fully functional, turning length: 450 mm, turning diameter: 65 mm, spindle speed (max.): 5,600 rpm, rotational speed (max.): 8,000 rpm, TECHNICAL DETAILS Control unit: Traub TX 8F Turning length: max. 450 mm Machining diameter: max. 65 mm Bar diameter: 65 mm Spindle data Spindle speed: max. 5,600 rpm Spindle motor: 18.5 kW Number of spindles: 2 Tool data Number of tool stations on the turret head: 14x VDI30 Maximum speed of the turning tools: 8,000 rpm Drive of the turning tools 100% / 15%: 1.5 / 4 kW MACHINE DETAILS Dimensions: 3,450 x 2,400 x 2,100 mm Weight: 4,800 kg Switch-on hours: 44,533 h EQUIPMENT - Breuning IRCO ILS RBK 10012 bar loading magazine - Parts collection system with belt conveyor - Chip preparation with KNOLL belt filter system - Chip conveyor Felq Shsulw D Usp Iegb - HAINBUCH collets - Tool holder (rigid and driven) - Documentation

Condition: refurbished (used), Year of construction: 2017, Functionality: fully functional, machine/vehicle number: 510864, turning length: 200 mm, CNC lathe INDEX G200 Overhauled: 2017 Machine number: 510864 max. turning length: 200 mm Bar loading magazine INDEX MBL Main spindle Spindle passage collet clamping: 42mm Spindle diameter in front bearing: 85mm Spindle nose ISO702/1: 5 Chuck diameter: 140/160 Max. Nominal turning diameter: 200mm Max. Rotation diameter: 420mm Power Pmax 100%: 7.5/13/20 Torque Mdmax 100%: 35/61/95 Speed: 6300 Counter spindle Spindle passage collet clamping: 42mm Spindle diameter in front bearing: 85mm Spindle nose ISO702/1: 5 Chuck diameter: 140/160 Power Pmax 100%: 7.5/13 Torque Mdmax 100%: 35/61 Speed: 6300 Min. distance collet: 15mm Longitudinal travel: 445mm Rapid traverse: 22.5mm Cross slide 1 XZ (top) XZ: 120x400mm Feed force: 5000N Cross slide 2 (bottom) Fgjlq Shpjulhinj Isb XZ: 105x400mm Feed force: 5000N Further information on request!

Condition: used, Year of construction: 2004, operating hours: 11,022 h, Functionality: fully functional, machine/vehicle number: 07520000211, turning length: 1,070 mm, turning diameter over cross slide: 400 mm, turning diameter: 560 mm, spindle motor power: 37 W, spindle speed (max.): 4,000 rpm, spindle bore: 79 mm, travel distance X-axis: 485 mm, travel distance Y-axis: 160 mm, rotational speed (max.): 12,000 rpm, Equipment: rotational speed infinitely variable, Gildemeister GMX 200 Linear with tailstock and steady rest for sale. Included is a cooling water treatment and a proper tool selection HSK 63 - A. The machine is being sold due to lack of orders. 49700 switch-on hours, 11022 spindle hours. Machine can be inspected and tested at any time. Loading possible without problems. Fjleug Uc Nsq Shp Iogb

Condition: good (used), Year of construction: 2006, Sliding headstock automatic lathe GILDEMEISTER Speed 20-11 linear, no. 2701-0127, year 2006, control DMG MORI FANUC 160I, chip conveyor, together with bar loader IEMCA Boss 332 E, type 32 L, no. 020643NA09, year 2006 2 identical machines available Fjlq Shsunv Iqjp Isgb

Condition: good (used), Year of construction: 2008, EMCO CONCEPT MILL 450 Year 2008 Fslq Sjugl Tljhp Ijgb 100 % functional Immediately available Weight-3800 kg.

Condition: excellent (used), Year of construction: 2015, operating hours: 13,782 h, Functionality: fully functional, bar diameter: 52 mm, controller manufacturer: FANUC, controller model: 32i-B5, number of slots in tool magazine: 24, Biglia B 446 T2 in very good condition and with extensive equipment Delivery / removal: in week 35 or week 39 or by arrangement Known defect: The milling drive on the upper turret 1 must be re-mounted and adjusted. The measuring probe, swiveling, with two heads for tool measurement (turret top and bottom), must be sporadically supported manually when swiveling out. However, the function is available. No other defects are known. TECHNICAL DETAILS CNC control: FANUC 32i-B5 Main and counter spindles: 2 C-axes, 2 Y-axes and 2 turrets with 12 driven stations each Main spindle: A5' 15 kW Counter spindle: A5' 1 kW Bar capacity: 52 mm Control: Fanuc 31i B-5 Counter spindle: lowerable Y-axis: +50 / -40 mm, 4-fold guided X-axis guide: flat guide Turret: 2 pieces with 12 driven tool positions each Torque: 47 Nm Parts catcher: controlled, can be used for main and counter spindle Finished parts indexing conveyor: transfer to storage conveyor 800 x 300 mm MACHINE DETAILS Machine dimensions: approx. 4550 x 2150 x 225 mm Machine weight: approx. 7400 kg Bar loading magazine: LNS Quick Load SERVO 80 S2 (year 2015_QL SSO S2) Short bar loader: Quick Load Servo 80 Bar length 900 mm / 6-65 / 80 mm Feeding ramp 600 mm Shifting device: transverse/longitudinal (can also be changed later) Ram: 6 - 12 - 20 mm V-extension: 150 mm / 120° / protective cover Loading magazine dimensions: approx. 2200 x 1000 x 1700 mm Loading magazine weight: approx. 800 kg HP high-pressure system: approx. 30 - 40 bar, coolant emulsion / coolant fine filter cartridge Dimensions peripherals & accessories: approx. 1900 x 700 x 800 mm Weight of peripherals & accessories: approx. 200 kg Dimensions peripherals & accessories: approx. 1900 x 700 x 800 mm Weight of peripherals & accessories: approx. 300 kg Chip conveyor dimensions: approx. 4100 x 2100 x 1300 mm Weight of peripherals & accessories: approx. 800 kg EQUIPMENT - Hinged belt chip conveyor with ejection height 820 mm - 2 coolant pumps 7 bar incl. filter - Foot switch for chuck actuation on the main spindle - Interior flushing with 4 bar pump - Measuring probe, can be swiveled in, with 2 heads for tool measurement - High-pressure coolant pump 40 bar 20 l/min incl. coolant filter 90 um - Manual - Dialog programming turning/milling cycles, - 3D simulation, manual (on CD) - SBS tool breakage/wear monitoring - HAINBUCH SPANNTOP AXFIX 52-A6 NOVA offset, length 150 mm, - Three-jaw wedge bar chuck 165/45 / A5 SMW HFKN-D 165-3 1/16 - Various tool holders Fgelq Shpjuglwwe Ijb - 4 High-precision boring bar holders - Reduction sleeve - Rotating material stop - 2 ER25 drilling and milling head with IKZ, i1:1, straight - 2 ER25 drilling and milling head with IKZ, i1:1, angled - Foot switch for counter spindle, for opening and closing the clamping device - Air cleaner, mechanical AR VF - 5-stage for emulsion mist/smoke There is the possibility of acquiring further objects such as clamping devices, tool holders, carbide tools, measuring equipment, measuring machines, cooling medium etc. in high quality at a favorable price due to the discontinuation of the trade. Shipping, dismantling and loading costs can be reduced when purchasing several auction machines from the same seller.

Condition: excellent (used), Year of construction: 2004, Functionality: fully functional, machine/vehicle number: 460030, turning length: 800 mm, turning diameter: 65 mm, spindle speed (max.): 5,000 rpm, travel distance X-axis: 180 mm, travel distance Y-axis: 140 mm, travel distance Z-axis: 800 mm, Machine has been checked by the seller with regard to geometry. All tools included, except collets. TECHNICAL DETAILS Control: Index C200-4D (based on Siemens 840D powerline) Turning length: 800 mm Fgelq Shpeuf Traj Ieb Rotation diameter: 200 mm Spindle passage: 65 mm Spindle head: 140 mm Chuck diameter: 160 mm Speed: 5,000 rpm Power 100%/40% ED: 20/27 kW Counter spindle: available C-axis resolution: 0.001 B-axis: 360° Traverse path X / Y / Z: 180 / 140 / 800 mm Rapid traverse X / Y / Z: 22.5 / 10 / 45 m/min Tool speed: 6,000 rpm Axis turret 1: X1 / Y1 / Z1 Tool positions turret 1: 12 pieces Axis turret 2: X2 / Y2 / Z2 / B2 Tool positions turret 2: 12 pieces Axis turret 3: X3 / Z3 Tool positions turret 3: 10 pieces MACHINE DETAILS Dimensions: 4,435 x 1,950 x 1,930 mm Weight: 7.5 tons Rated power: 40 kW Operating voltage: 400 V, 50 Hz Cooling: 2 x 80 bar Bar loader: Breuning Irco

Condition: ready for operation (used), Year of construction: 2004, operating hours: 14,354 h, Functionality: fully functional, travel distance X-axis: 475 mm, travel distance Y-axis: 160 mm, travel distance Z-axis: 1,170 mm, number of slots in tool magazine: 84, swivel angle B-axis (max.): 210 °, swivel angle C-axis (max.): 360 °, TECHNICAL DETAILS Swing diameter over bed: 550 mm Swing diameter over cross slide: 530 mm Control system: OKUMA OSP-U100L Travel distance - x1: 475 mm Travel distance - x2: 160 mm Travel path - z1: 1,170 mm Travel distance - z2: 1,155 mm Travel path - y: 160 mm C-axis: 360° B-axis: 210° Number of positions in the tool changer: 84 Number of holders in the turret head: 12 MACHINE DETAILS Dimensions: 4,320 x 2,645 x 2,900 mm Machine weight: 12,500 kg Spindle hours: 14,354 h Switch-on time: 70,794 h Fgolq Ssuf Tlgshp Ieb EQUIPMENT - with palletizing system and robot handling