Condition: good (used), Year of construction: 2008, - Work area 3050 x 1360 mm - Maximum loadable panel height 200 mm - N ° 1 Electrospindle 7,5 kW HSK-63 - N ° 1 horizontal Electrospindle 3 kW - 14 position tool magazine installed on the Z carriage - N ° 1 saw blade DM 180 mm 0-90 ° - No. 18 independent vertical spindles - No. 4 opposing horizontal spindles in X - No. 2 opposing horizontal spindles in X Dobu Tfjlk Egwjy Sskl - N ° 6 worktops with 18 suction cups - Xilog numerical control - 100 mc / h vacuum pump - Security system with Bumpers and perimeter networks - CE standards - suction connection DM 250 mm - required suction capacity approx. 5500 m3/h - Incl. some tools - weight approx. 3600 kg Advise used machines: • Technical data without obligation, mistake and intermediate sale reserve. • Price is considered ex-location price • All articles or machines are bought as seen without any entitlement on warranty. • It is left to the choice of the buyer to view the machines before at its location. • Special arrangements are possible but only valid in written form. (We answer your inquiries only with stated address + telephone number!)

Condition: used, Year of construction: 2023, Numerical Control BH 660 with BSolid Working range on X-axis mm 4320 Working range on Y axis mm 1660 Working range on Z axis mm 200 No. 2 work fields on X axis Bar worktop No. 8 adjustable bars for suction cup support No. 8 pneumatic bakelite bars for lifting the panel No. 3 adjustable suction cups for each bar with vacuum seal for fixing the panel during processing No. 1 5-axis vertical electrospindle, with automatic tool change, liquid cooling, HSK63 type cones, KW 13 (HP 17.4) Automatic tool change system with 16 positions with revolver positioned along the X axis on the back of the machine Automatic tool magazine with 12 positions positioned on the machine side BH24 L drilling head with spindles arranged as follows: - No. 8 verticals on X axis - N° 6 verticals in Y axis - N° 6 horizontal on X axis - N° 4 horizontal in Y axis - N° 1 Integrated blade for making grooves Chip evacuation system with motorized belt Front protection and safety system with carpets Automatic lubrication system Air conditioning system for cooling and cleaning of machine control 250m/c vacuum pump TECHNICAL DETAILS TO BE CHECKED Dkebuswgc D Ej Tfy Sel

Condition: like new (used), Year of construction: 2024, Functionality: fully functional, travel distance X-axis: 3,200 mm, travel distance Y-axis: 1,600 mm, travel distance Z-axis: 200 mm, feed length X-axis: 3,200 mm, feed length Y-axis: 1,600 mm, feed rate X-axis: 70 m/min, feed rate Y-axis: 70 m/min, feed rate Z-axis: 25 m/min, controller manufacturer: Syntec, controller model: SYNTEC, Equipment: chip conveyor, documentation/manual, rotational speed infinitely variable, Price: On request CNC Machining Center Year of construction 2024 Hiteco CNC 12Kw milling motor HSK63F mounting Debu Tfystty Aho Sskl retool dish 10 positions multi-drill 2 groove saws 7x vertical drills 8x horizontal drills software PWood Pegasus Working field X-axis 3,200mm Working field Y-axis 1,600mm Working field Z-axis 135mm Vacuum pump Becker VTLF2.250 5.5Kw Omron safety light street central automatic grease lubrication connection diameter extraction Ø200 Required capacity 28m/m | 2900m3/h Weight 3,200Kg total power Free 1 year online help desk. Teamviewer language English This service prevents unnecessary downtime. Immediately available Delivery and installation negotiable in Europe D.M.A Machines are assembled in Almelo according to the EG2023 Europe CE marking Pilz The Spirit Of Safety

Condition: new, Year of construction: 2024, Functionality: fully functional, travel distance X-axis: 3,000 mm, travel distance Y-axis: 2,000 mm, travel distance Z-axis: 200 mm, spindle speed (max.): 18,000 rpm, TECHNICAL DETAILS Travel X / Y / Z: 3,000 / 2,000 / 200 mm Accuracy: 0.01 mm Spindle Spindle power: 3.0 kW Spindle speed: 0 - 18,000 rpm, variable Spindle diameter: 3.175 - 12.7 mm Spindle cooling: air Working area and equipment Maximum material height: 120 mm Work table size: 3,000 x 2,000 mm Extraction table: 5.5 kW double stage, divisible into 6 zones Djbu Tfyswgbtle Sekl Felt carpet thickness: 4.5 mm Plotter equipment 1st head: 380V 5.5 kW water-cooled electric spindle 2nd head: Electric oscillating knife 3rd head: Rolling tool EQUIPMENT - PC Includes machine control software and Ethernet interface - Supported file formats: vector formats, DXF, G-code - Camera for detecting print marks - Extractor with dual filter and 3.0 kW motor - Extraction tube and collector for the spindle

Condition: good (used), Year of construction: 1997, Hundegger - K1 joinery system, built in 1997, with the following equipment: - Cross feed conveyor with flat belt chains - Under-table swivel cross-cut saw, blade diameter 800 mm - 4-axis universal milling machine with finger milling cutter and dovetail cutter Combination support for vertical tools: - Drilling rig - Vertical finger milling cutter Combination support for horizontal tools: - Drilling rig - Drilling rig - Slotting set - Rear marker - Automatic edger - Various milling heads - Spare saw blades Dkebuewf R I As Tfy Sjl €38,000 + VAT Condition: Used, no warranty or guarantee. Assistance with dismantling is available. Available upon request. For questions, please contact us for more photos!

Condition: used, Year of construction: 2020, Working dimension Z: 300 mm Number of milling spindles: 1 HOLZ-HER 5-axes spindle 7840: Yes Milling spindle liquid-cooled: Yes Main motor power: 12 kW Rotation speed max: 24.000 rpm 4th axis: Yes 5th axis: 5-axes spindle Tool clamping system: HSK-F63 Vertical drilling spindles: 10 Horizontal drilling spindles in X: 4 Horizontal drilling spindles in Y: 2 Groove saw: in X-direction HOLZ-HER Drilling aggregate 7882: Yes Dkebu Tfov R Ekwjy Ssl Cantilever machine: Yes Machine table: Pod and rail table Two rows of stops: Yes Workpiece support aids: Yes Number of consoles: 8 Positioning aid: Yes Laser setup aid: Yes Self-adjusting machine table: Yes Vacuum pump: Yes HOLZ-HER ECO-Vac: Yes Safety device: Safety mat Interface for .dxf data: Yes Pendulum machining: Yes Control: PC control Control cabinet cooling: Yes Software: HOLZ-HER CAMPUS Conformity marking: CE mark Space requirement Length: 8,95 m Space requirement Width: 4,62 m Space requirement Height: 2,86 m

Condition: new, Year of construction: 2022, The new numerical control universal drilling machine for woodworking shops and craftsmen with very good price / performance ratio. machine incl. options: sensor for work piece calibration / measuring pressure booster for drilling spindles in Z - axis Dkebjfhy R Nsu Tfy Sel automatic lubrication system incl. SCM software "Maestro cnc" qwerty keyboard 10'' Touch Screen dDrilling head and grooving operations with 11 independent spindles and integrated blade in X direction max. workpiece dimensions X-Y-Z = 3000 x 900 x 50 mm min. workpiecedimensions X-Y-Z = 300 x 90 x 10 mm max. speed der X-Y axis 20 m/ min spindels in X-axis # 2 spindels in Y-axis # 2 spindels in Z-axis # 7 grooving unit saw blade DM 125 mm Advise used machines: • Technical data without obligation, mistake and intermediate sale reserve. • Price is considered ex-location price • All articles or machines are bought as seen without any entitlement on warranty. • It is left to the choice of the buyer to view the machines before at its location. • Special arrangements are possible but only valid in written form. (We answer your inquiries only with stated address + telephone number!)

Condition: used, CNC work center with double Nesting work surface Numerical Control with WooWop software Working range on X axis mm 3400 Working range on Y axis mm 3400 (mm 1700 x 2) No. 2 working fields on aluminum tables Nesting - the machine works with single planes or with both simultaneous work planes No. 2 work planes with full nesting plane Multi-zone vacuum system No. 2 vertical electrospindles 4 axes with liquid cooling No. 2 Automatic tool change system with chain with no. 24 positions, HSK-F63 cones No. 2 Automatic tool change system with no. 10 positions on the electrospindle, HSK-F63 cones Vacuum pump mc/h 250 Automatic lubrication system Front protection and safety system with mats TECHNICAL DETAILS TO BE VERIFIED Djbu Tfewf Nwisy Sskl

Condition: new, Year of construction: 2025, Functionality: fully functional, travel distance X-axis: 3,200 mm, travel distance Y-axis: 1,600 mm, travel distance Z-axis: 210 mm, rapid traverse X-axis: 60 m/min, rapid traverse Y-axis: 60 m/min, rapid traverse Z-axis: 20 m/min, Price on request CNC Machining Center Year of construction: 2025 milling motor 9Kw speed 1,000 / 24,000Rpmrecording HSK63F retool-change magazine multi-drill + 2 groove saws 7x vertical drills 8x horizontal drills software PWood Pegasus inport: DXF, jpg, png, eps, plt,... Cad milling simulation software nesting optimization Working area Y-axis 1,600mm Working area Z-axis. 200mm Vacuum pump Becker VTLF2.250 5.5Kw Omron safety light-street central automatic grease-lubrication connection diameter extraction Ø150 Required capacity 28m/m | 2900m3/h Weight 2,600Kg Total power 20.7Kw Free 1 year online helpdesk. Teamviewer language English This service prevents unnecessary downtime. Immediately available Delivery and installation negotiable for the whole of Europe D.M.A Machines are assembled in Almelo according to the EG2023 Europe CE marking Pilz The Spirit Of Safety overview of all work areas: - 1,300x2,600mm - 1,300x3,200mm - 1,600x3,200mm - 1,600x5,200mm Debu Tfyevpunij Sjkl - 2,100x3,200mm - 2,100x4,100mm - 2,100x 5,200mm - 2,100x6,100mm Z-axis 85>500mm many options possible, please contact us for this

Condition: as good as new (ex-display), Year of construction: 2024, Axolox 3021 CNC wood router - display machine available immediately - in 19mm Forescolor, consisting of a router table (X-axis), gantry (Y-axis), Z-axis unit made of compact board, and a base frame, with adjustable machine feet. Router bed as a sacrificial board made of 19mm MDF. Table openings pre-prepared lengthwise and crosswise. Mechanical set consisting of profile guides including profile guide carriages, recirculating ball screws, and precision racks. All elements assembled, pre-lubricated, including a test run, and immediately ready for operation. The control set consists of control cables, energy chains, planetary gears, stepper motors, high-performance power amplifiers, power supply, and toroidal transformer, fully pre-assembled in the control cabinet, as well as sensors for each axis. Switching relays for automatic control of the existing extraction system. Brush seals for dust protection, as well as CE-compliant safety devices with a mobile extraction system and a laser scanner mounted on one side for monitoring the work area, with a 275° and 5.5 m field range (positioning the machine in a corner of the room). A handheld control unit is equipped with all the necessary functions for operating the machine, including an emergency stop button and a deadman's switch. A tool length sensor is used to determine the tool length and change the active zero offset. A 2.2 kW high-frequency spindle includes a union nut, frequency converter, line filter, brake resistor, and collet set. A built-in monitor includes a mini PC with Windows 10 and Beamicon2 control software, as well as a mouse and keyboard, pre-installed in an ergonomic desk. A Rhino 7.0 CAD license and an Estlcam V11 CAM license, as well as all necessary documentation, will be sent by email prior to delivery. Djbuewdny Te Tfy Sokl - Milling bed designed as a vacuum table consisting of six adjustable sub-elements. Cross table made of PE with an MDF cover plate. Vacuum pump from Becker with an output of 160 m³/h, with an oil-driven rotor. A 16 amp, 400 V AC plug is required for the vacuum pump's power connection. The customer must provide 3 mm HDF raw on both sides for the entire vacuum table (3000 x 2100 mm) as a sacrificial plate. (Recommended use: machining coated chipboard) - Tool set: 10 pieces 2 x 5 mm TAC double-flute cutters 8 x 4 mm solid carbide single-flute cutters - Maintenance package: Including a 150 ml grease gun, a 400 g cartridge of high-performance grease, a 500 ml can of silicone spray grease, and a grease nipple - Clamping device as an attachment for the existing high-frequency spindle. Suitable for slightly curved and particularly thin materials. Location: From stock, 54634 Bitburg - Available immediately - Subject to prior sale

Condition: as good as new (ex-display), Year of construction: 2023, Functionality: fully functional, machine/vehicle number: kk000040778, feed length X-axis: 300 mm, feed length Y-axis: 900 mm, feed length Z-axis: 50 mm, startech cn v is the new NC universal drilling and blade cutting machine with fixed gantry worktable and movable workpiece, dedicated to the machining of: vertical drilling on the panel surface horizontal drilling on all four sides cutting with integrated blade in "X" direction FLEXIBLE: IDEAL FOR CUSTOM PRODUCTION Fully automatic machine with simple and intuitive Interface for fast programming. Dkebuer Iz Tis Tfy Sol PERFORMANT: TOP PERFORMANCE Minimal setup and run times with axis speeds up to 20 m/min. COMPACT: SMALL MACHINE FOOTPRINT With its footprint of 5.5 m^2, it does not require large spaces. UNMISSABLE: AFFORDABLE FOR EVERYONE Machine accessible even to the craftsman and small woodworker with unbeatable price/performance ratio

Condition: used, Year of construction: 2018, Working dimension X: 3.050 mm Working dimension Y: 1.250 mm Working dimension Z: 80 mm Independent Z-axes: 2 HOMAG Split-Head: Yes Number of milling spindles: 1 Main motor power: 10 kW Rotation speed max: 24.000 rpm Tool clamping system: HSK-F63 Tool changer positions: 4 Vertical drilling spindles: 20 Horizontal drilling spindles in X: 12 Horizontal drilling spindles in Y: 4 Groove saw: 90° turnable Vertical working surface: Yes Machine table: Feed-through technology Special workpiece clamping system: clamp gripper Outfeed: Workpiece return Dowel insertion: Yes Debu Tfyovg Riqe Sokl Glue system: PVAc Safety device: enclosed cabin Control: Homag powerTouch HOMAG - Uninterruptible power supply: Yes HOMAG Plausibility check: Yes Control cabinet cooling: Yes Software: HOMAG WOODWOP 7.1 Conformity marking: CE mark

Condition: used, machine/vehicle number: 006151, X axis working area: 3100 mm Y axis working area: 1250 mm Working Table: Pod and Rail Main Electrospindle power: 9 KW Number of controlled axes: 4 axes Dkobueiv Ipbe Tfy Ssl Total number of drilling spindles: 18 Total number of tool changer positions: 16

Condition: good (used), IMA LED set-up aid used in working condition. Dkobsbxx Iuju Tfy Sel about 60 LEDs 15 pin serial port on both sides Dimensions 18 x 56.7 x 312 mm including 10 mm for the connectors Direct purchase in our internet shop on our homepage

Condition: new, Year of construction: 2025, Functionality: fully functional, travel distance X-axis: 3,200 mm, travel distance Y-axis: 1,600 mm, travel distance Z-axis: 210 mm, rapid traverse X-axis: 60 m/min, rapid traverse Y-axis: 60 m/min, rapid traverse Z-axis: 25 m/min, feed rate X-axis: 50 m/min, feed rate Y-axis: 50 m/min, feed rate Z-axis: 20 m/min, controller manufacturer: Delta, workpiece height (max.): 300 mm, total height: 2,100 mm, spindle speed (min.): 1,000 rpm, spindle speed (max.): 24,000 rpm, spindle motor power: 9,000 W, input voltage: 400 V, Equipment: documentation/manual, rotational speed infinitely variable, Made in The Netherlands Manufacturer: D.M.A. Machinery Model: Express-Router Dimensions: 1,300 x 2,600 mm Machine type: CNC Nesting Machine Features: - Tool-changing station with 10 positions - Nesting CADCAM software: Pegasus - Speed: 1,000 - 24,000 RPM (9kW ATC spindle) - Vacuum pump: 5.5 kW (Becker) - Automatic lubrication system - Servo motors and servo drivers - Hiwin linear guide system Dkjbju E Th Rju Tfy Ssl - Syntec CNC control - Schneider electronics - Supported file formats: DXF (AutoCad), EPS, PLT, TXT, AI (Adobe Illustrator), and more - Professional design tools: direct drawing, image processing, text editing, serial numbering, and advanced nesting function Available Configurations: - X-axis: 2,600/3,200/4,200/5,200/8,000 mm - Y-axis: 1,300/1,600/2,100/5,000 mm - Spindle: 9/12/16 kW (CC) | HSD/Hiteco - Multi-Drill: Yes - Horizontal side milling motor: 3.2/6 kW (0-305°) - Saw unit: 6 kW, Ø300 mm Other dimensions and configurations available upon request.

Condition: ready for operation (used), Year of construction: 2008, ROVER A 3.30 K4 - CNC machining center Working area: X = 3060 mm; Y = 1260 mm; Z = 150 mm 9080345 Automatic lubrication system 6 ATS workpiece supports - L = 1200 mm - 18 module supports 6 stops with 115 mm stroke 6 stops with 15 mm stroke positioned 970 mm from the rear Side stops with 15 mm stroke, complete with pneumatic equipment Narrow part clamps 12 vacuum modules 132 x 146 x H48 mm 6 vacuum modules 132 x 75 x H48 mm Chip conveyor belt integrated into the machine bed Vacuum pump 250 m3/h Auxiliary vacuum system Flange for preparing a milling spindle for use with an angle unit 360° C-axis Drill head BH 21 L Turret tool magazine with 18 pockets Remote control functions CNC control XP600 Dkebu Tfswdnqxsy Sjl Graphical operator interface BIESSEWORKS Air conditioning system Safety devices with two front safety mats and rear and side protective grilles 7350283| Division of the vacuum system into two independent work areas in X. Division of the pneumatic system into two work areas in X. 7300510| Chip conveyor belt integrated into the machine bed 50820 250 m3/h vacuum pump instead of the 90 m3/h pump WORK UNITS 7212013| 360° rotating work unit (C-axis) with gear drive, for machines with preparation 7212006| 12 KW (16.1 HP) electric spindle with HSK F63, air-cooled NC-Hops 4-axis machine license version 4 The tool shown is not included in the scope of delivery. Location: from customer location - Available: end of May 2025 -

Condition: used, Year of construction: 2011, Biesse Skill 300 CTS CNC Machine Description: Working area X and Y: 2900 x 1150 x 110mm Table type: Beam table Number of milling motor axes: 3 Drilling unit: BH-17L Tool holder: Iso-30 Changer: 10 positions Rack Number of vacuum pumps: 1 Fences: Yes Dksbu Tfswc Swtjy Sel Office software license: No (All changes, mistakes in technical data, info and prices reserved. Availability subject to prior sales. No guarantee on printed data!) (Alle Änderungen und Irrtümer in den technischen Daten, Angaben und Preisen sowie Zwischenverkauf vorbehalten! Keine Garantie auf gedruckte Daten!) Best woodworkingmachines from the Netherlands Holland Die besten holzbearbeitungsmaschinen aus die Niederlande De beste gebruikte machines uit Nederland

Condition: used, Year of construction: 2017, Working dimension X: 3.100 mm Working dimension Y: 1.560 mm Working dimension Z: 170 mm Independent Z-axes: 2 Number of milling spindles: 1 Main motor power: 13,2 kW Rotation speed max: 24.000 rpm Torque support: Yes Tool clamping system: HSK-F63 Tool changer positions: 16 Disc tool changer: Yes Dsbswc Tmcou Tfy Sjkl Gantry machine: beidseitig angetriebene Gantrymaschine Machine table: Matrix table Electronic supervision of the end-position of the stops: Yes Multi-zone vacuum: Yes Vacuum pump: Yes Number of vacuum pumps: 2 Capacity vacuum pump: 500 m³/h Suitable for nesting: Yes Registration mark recognition: Yes Safety device: Light barrier Ionisiereinrichtung: Yes Interface for .dxf data: Yes Remote control: Yes Automatic lubrication: Yes Tool charge measurement: Yes Enclosed drag chain: Yes Control: BIESSE BH 660 Software: BIESSE B_SOLID, BIESSE B_NEST, BIESSE BSOLID DATENIMPORT, MICROSOFT WINDOWS 7 Registration mark recognition: Yes Conformity marking: CE mark Total connection: 31,21 kW Weight: 3.600 kg

Condition: like new (used), Year of construction: 2021, Functionality: fully functional, machine/vehicle number: 2109051, controller manufacturer: Yaskawa, controller model: Weihong NK300CX, workpiece length (max.): 2,500 mm, workpiece width (max.): 1,280 mm, workpiece height (max.): 200 mm, total height: 2,500 mm, total length: 2,100 mm, total width: 4,000 mm, table width: 2,625 mm, table height: 810 mm, table length: 1,600 mm, table load: 1,000 kg, overall weight: 3,000 kg, operating hours of spindle: 150 h, spindle motor power: 8,000 W, number of spindles: 1, number of slots in tool magazine: 8, type of input current: three-phase, Equipment: USB port, rotational speed infinitely variable, Due to termination of business for sale: almost new CNC milling machine, suitable for wood, plastics and non-ferrous metals. Very accurate, gives an extremely smooth result and is easy to program with any software. Very stable, cross-welded steel frame with 8 adjustable feet. Material can be secured with vacuum and with clamps. Of course the machine can be seen working. - Including software with tool database - Approx. 150 operating hours - Automatic calibration of tools Dkjbu Tfowfrxiey Ssl - Automatic programmable lubrication of all axes - Including extraction and tubes - Vacuum table in 5 switchable zones - Including vacuum pump - Equipped with soft starters - Automatic tool changer with 8 positions - 8 kW HSD spindle - Delta inverter - Yaskawa discrete drivers and motors on all axes - Weihong NK300CX control (works with any software) - Including remote control - Controls for compressed air, extraction and vacuum on the machine - Air cooling and liquid cooling switchable and programmable. - Including 25 meters of connection cables - Mobile control cabinet - USB connection - Network connection - ISO30 ER32 mounting - Fixed and programmable zero points for all axes - Including 25 tool holders - Including 65 collets 1mm to 20mm - Including approx. 100 cutters for all operations - Including plastic and aluminum workpiece clamps

Year of construction: 2001, Condition: good (used), IMA glue part Spare part for e.g. IMA 680 / 480 /980 Edge banding unit for 4-sided gluing and all-round gluing on butt joints with: -Main pressure roller diameter 100 mm and pneum. controlled squeezing roller, diameter 35 mm -Specification of adhesive for the coating of the Edge material, with temperature control and level control -Servo drive for edge transport with auto- automatic adjustment to the web speed -Hot air re-activation unit 7.5 KW, on the adhesive side -IR radiator 600 watts on the decor side the deformation of the material at small radii -pneumatically driven cutting saw -Bumping edge query -NC axis Rotation range up to 740 degrees, pneum. Z stroke 125 mm -separate NC-axis in Y (with portal in X) working independently of the main axis Year of construction of the part 2001 comes from machine IMA 680 V No. 2216 Scope of delivery as shown Please check the possibility of installation in your machine. No return possible Unit was used in production for about 2 years and can be described as good Technical information subject to change Dkobu Tebxx Ikjfy Sol

Condition: as good as new (ex-display), Year of construction: 2024, Functionality: fully functional, Price on request 3-Axis CNC machining center. TYPE ULTRA The ideal CNC machining machine for processing: EPS, Foam, Polystyrene (PS), PIR, EPS, PE, Rockwool, Glass fiber, plastics…, light wood types, Dsbov Tbggju Tfy Sekl 1530 Standard Configuration： 1.Control System: Syntec 2.Indepecent PC 3.Drive System: Syntec 4.Support Guide Rails:linear guide rails, heavy-duty sliders with flange (X35#, Y35#, Z#25) 5.Transmission Rack: 2-module helical gear rack. 6.Inverter: Delta 7.5kW inverter 7.Spindle Motor: BT40 7.5KW water-cooled spindle,

Condition: used, Year of construction: 2009, Functionality: fully functional, machine/vehicle number: 36901, travel distance X-axis: 4,600 mm, travel distance Y-axis: 1,535 mm, travel distance Z-axis: 250 mm, nominal power (apparent): 28 kVA, controller model: Biesse Works, spindle motor power: 1,500 W, number of spindles: 1, number of slots in tool magazine: 10, input voltage: 400 V, Equipment: chip conveyor, documentation/manual, rotational speed infinitely variable, Machine is in good condition. 2 years ago had a general renovation. Dkobuowfri Ue Tfy Sel 8 panel supports 1525mm length, 24 sliding bases Drilling Unit, BH 22L 250m3 Vacuum pump 5-axis, 15 kW Electrospindle with HSK63 adapter, liquid cooled Works with HSK63 Safety fence and carpets Belt conveyor for the removal of chips and off-cuts Pneumatic locking system divided in 2 work areas Pneumatic system for lifting bar supports Revolving tool changer with 10 places Automatic lubrication system Set of tools. Machine is on site, working.

Condition: good (used), Electrospindle Main spindle OMLAT IMA 12 KW The price includes the C-axis shown. If you only require the main spindle, we will of course grant a discount. 1st tool holder: Type: HSK F63, similar to DIN 69893 Taper diameter: 38 mm 2. tool retraction: Automatically controlled Pull-in force: 11000 N 3. tool weight: Maximum weight: 6 kg 4. direction of rotation: Right/left rotation, programmable 5. speed range: Infinitely adjustable from 1500 to 22000 revolutions per minute Programmable for individual requirements 6. drive: Frequency-controlled three-phase motor 7. drive power: 12 KW in S-1 operation 8. spindle lubrication: One-time factory grease lubrication for efficient maintenance Dksbu Tfyerhzlnj Ssl 9. spindle cooling: Water cooling to maintain optimum operating temperatures 10. constant performance: Range from 12,000 to 22,000 revolutions per minute Spindle condition: Used but tested The main spindle was removed from a running system and carefully checked. As an alternative to new spindles, which are often not available, it guarantees immediate use and optimum reliability. This used spindle offers a cost-effective solution without compromising on performance.

Condition: new, Year of construction: 2025, Functionality: fully functional, travel distance X-axis: 3,200 mm, travel distance Y-axis: 1,600 mm, travel distance Z-axis: 210 mm, rapid traverse X-axis: 50 m/min, rapid traverse Y-axis: 50 m/min, rapid traverse Z-axis: 20 m/min, workpiece height (max.): 200 mm, workpiece weight (max.): 1,000 kg, Equipment: chip conveyor, rotational speed infinitely variable, Prijs op aanvraag (telefonisch) Wij hebben voor elke budget CNC-freesmachine - Gereedschapswisselstation met 10-12-16 posities - Nesting CAD-programma: Wood Pegasus - Simulatie- en nesting-optimalisatiesoftware - Gereedschapshouders: ISO30 | HSK63F Dkebu Ton D Ha Rofy Sel - Toerental: 1.000 - 24.000 tpm - Automatisch smeersysteem (standaard) - CNC-besturing SYNTEC - Ondersteunde bestandsformaten: DXF, JPG, PNG, EPS, PLT en meer - Optioneel: Horizontale en verticale boorspindel - Optioneel: Groefzaagunit - Optioneel: Vacuümpomp 250 m³/u droogpomp (BECKER)

Condition: new, Year of construction: 2025, Functionality: fully functional, travel distance X-axis: 3,200 mm, travel distance Y-axis: 1,600 mm, travel distance Z-axis: 210 mm, rapid traverse X-axis: 60 m/min, rapid traverse Y-axis: 60 m/min, rapid traverse Z-axis: 20 m/min, controller manufacturer: Syntec, total height: 2,100 mm, total length: 4,300 mm, total width: 2,100 mm, table load: 2,500 kg, spindle motor power: 12,000 W, number of spindles: 16, Made in The Netherlands | CE certified | Handling; Dutch, English, Turkish, Italian, Polish, and more Manufacturer: D.M.A. Machinery Model: Express-Line type Nesting Dimensions: 1,600 x 3,200 mm Z-axis: 210mm Machine type: CNC Nesting Machine Year of construction: 2024 Features: - Tool-changing station with 12 positions (optional rotary carousel with up to 18 positions) - Nesting CADCAM software: Pegasus for milling & paneling - Optional double groove saw (X-Y axis) - 9.5 kW ATC spindle - 12 kW ATC Hiteco spindle HSK (optional) - 12.5 kW HITECO HSK spindle Djbu Tfyjtph I Nj Sjkl - Tool holders: ISO30 | HSK63F (ER32/ER40) - Optional: HSK63F (SCM Hiteco) - Speed: 1,000 - 24,000 RPM - Vacuum pump: 5.5 kW – 250 m³/h - Automatic lubrication system: Standard (grease) - CADCAM software post-processor included - Supported file formats: DXF, JPG, PNG, EPS, PLT, and more - Simulation and nesting optimization software