Used brewing equipment for sale (118)

Year of construction: 1999, condition: used, 3-device compact brewhouse for 20 hl output Additional title: 20 hl compact brewing system Brew size: 2000 l Podpfx Ajw U A T Ijh Hjgg Length: 2600 mm Width: 5000 mm Height: 4500 mm Operation / Control: Manual control with heating programme controller ‘Barbie and Kühner 7600’ l Material: stainless steel / copper Base construction: Brewing vessels mounted on frame construction Features: Mash/wort kettle, lauter tun, pre-run vessel/whirlpool, spindle station, stainless steel control cabinet with control, stainless steel frame with operating platform, stairs, piping, pumps and fittings

Year of construction: 2008, condition: used, 5-vessel-brewhouse with additional whirlpool with a knockout capacity of 250 hl at 12° Plato. The brewhouse consists of a mash kettle, a mash decoction kettle, a lauter tun, a prerun vessel and a wort kettle with internal boiler. Furthermore, a classic whirlpool with wort cooling and wort aeration is installed. The brehouse is fully automated with the electronic process control "brewmaxx V7" and on basis of the operation system Windows. The brewhouse is completely made in stainless steel, but installed beneath the old copper hoods. The prerun vessel is "Outdoor"-installation, the whirlpool is - like the other brewing vessels - installed in the brewhosue room beneath a copper hood. Additional title: Modern brewhouse made of stainless steel, copper-clad Cast wort capacity: 250 hl Operation / Control: Fully automatic with "brewmaxx V7" process control system Material: Stainless steel brewhouse with copper cladding Pgodpew T St Usfx Ah Hog Features: Mash tun kettle, mash kettle, kettle vapor condenser, lauter tun, spent grains bunker with spent grains conveyor, feed vessel, wort kettle with internal boiler, hop dispenser, spindle station, whirlpool, wort cooling, wort aeration, Various pumps, measurement and control technology, valves, control cabinets

Condition: good (used), 3 cyl.-con. Yeast tanks, make BAM, each with 53,88 hl content, 1,5 bar working overpressure, standing on 3 feet (1 foot on weigh cell), in stainless steel mirror polish design, with 3 cooling zones (2x wall and 1x cone), with screwed swiveling cone point, partly with magnetic agitator in cone, ladder hanger at top, built 1977, Ø: 1.800 mm, H: 2.900 mm. Podperxukmofx Ah Hjgg 2 cyl.-con. Yeast tanks, make BAM, with each 59,98 hl content, allowed working overpressure 3,5 bar, in stainless steel, standing on 3 feet, with 3 cooling zones (2 x wall + 1 x cone), with screwed swiveling cone end, with agitator in cone, with sprayball, at top with ladder hanger, built 1985.

Year of construction: 2016, condition: used, Malt milling with 4-roller grist mill. Podpfjw Tmtvox Ah Hsgg Additional title: with 4-roller grist mill Capacity: 4 t/h Operation / Control: Siemens Simatic S7-300 Features: 3 x silo discharge, small; 4 x silo discharge, large; malt transport; blower; malt scales; malt conditioning; malt mill, 4-roller; control cabinet and control system

Year of construction: 1992, condition: used, Additional title: 6 coolable tanks Pgedpfx Aew Tmqzsh Hog Capacity: 164 hl Operating pressure: 0 bar Width: approx. 2.05 m Height: approx. 6,2 m Position: Vertical Base construction: On feet Features: Manhole, 2 cooling zones, sampling valve, security valve with pressure indicator, vacuum breaker

Year of construction: 2021, condition: used, 2 vertical pressure tanks with jacket cooling Additional title: vertical, coolable stainless steel tanks Max. content: 8578 l Max. pressure: 3 bar Width: approx. 1.9 m Pgedpfow Tlqgox Ah Hog Height: approx. 4.3 m Material: stainless steel Position: free-standing Base construction: cylindrical tank with dished bottoms and square tube feet on domes Features: Bunging apparatus, pressure gauge, 2 shell cooling zones, standpipe for content display, manhole, sampler and side inlet in the frame, automatic valve with temperature-control, central bottom outlet with shutting flap

Year of construction: 1999, condition: used, 5 upright storage tanks with jacket cooling Additional title: vertical, coolable stainless steel tanks Pgjdpfx Ahew Tlp Aj Heg Content: 4400 l Max. pressure: 0 bar Length: 1600 mm Width: 1600 mm Height: 2920 mm Operation / Control: manual Material: stainless steel 1.4301 Position: free-standing Base construction: cylindrical tank with curved bottoms and square tube feet on domes Features: sprayball, bunging apparatus, pressure gauge, 1 shell cooling zone, standhose for content display, manhole, thermometer and sampler in the shell, manual valve for cooling control, central bottom outlet

Condition: used, Brewing plant with a wort output of 20 hl, consisting of the following components: 1. grist plant (Joh. Albrecht, 2000, 500 kg/h) with mill, malt hull, floor scales, grist conveyor and control cabinet 2. 3-device compact brewhouse with insulated stainless steel vessels with copper bonnets, spindle station and control cabinet 3. fermentation and storage cellar with 4 x fermentation vats (Joh. Albrecht, 1999, 25 hl), 1 x fermentation tank (Nerb, 2002, 50 hl, 0.99 bar), 5 x storage tank (Joh. Albrecht, 1999, 44 hl, 0.99 bar) and 6 x storage tank (Joh. Albrecht, 1999, 22 hl, 0.99 bar). All tanks with jacket cooling. 4th pressurised tank cellar with 2 x pressurised tank (Speidel, 2021, 86 hl, 3 bar), 1 x pressurised tank (INOX, 2018, 67 hl, 3 bar) and 4 x pressurised tank (Joh. Albrecht, 1999, 12 hl, 2.5 bar). All tanks with jacket cooling. 5. keg cleaning and filling system (BTB. Multimat MT/2, 1997, 17-20 kegs/h) 6. refrigeration system as ice water generator (Joh. Albrecht, 1999, cooling capacity 14.5 kW) 7. steam generator with soft water system (Jumag, 2000, 224 kg/h steam, oil-heated) 8. 40 hl hot water tank (Joh. Albrecht, 1999), heatable, with switch cabinet Interested in only part of the system? The system is offered as a consignment sale. A partial sale might be possible – feel free to contact us and submit your offer. Additional title: cast wort volume 20 hl, years of manufacture 1997-2001 Cast wort capacity: 20 hl Features: Grist system; 3-device compact brewhouse; fermentation vats; fermentation, storage and pressurised tanks; keg system; refrigeration system; steam generator, warm water tank, CO2 liquid gas tank Pedswgc Udopfx Ah Hogg

Year of construction: 1991, condition: used, Storage tank, insulated, stainless steel, cooling jacket for glycol cooling. Additional title: Insulated tank with cooling jacket Capacity: 13 hl Width: 1300 mm Height: 2300 mm Formats: Flat conical Operation / Control: Manual Material: stainless steel 1.4301 Pgsdpfxsw Tldyo Ah Hjg Position: vertical Base construction: on 4 feet Features: double-walled with full jacket cooling, with sampling tap, pipe connections

Year of construction: 2000, condition: used, Cylindrical fermenter with side outlet in the lower part of the frame and cleaning connection in the hinged lid. Total volume: 1343 l Net volume: 1000 l for fermentation Length: 1495 mm Width: 1495 mm Height: 900 mm Material: stainless steel Pedpfxjw Td Eij Ah Hjgg Features: PT100 and magnet valve for temperature control

Year of construction: 2000, condition: used, Flat conical stainless steel fermentation tank for approx. 40 hl net content. Additional title: coolable tank Pgedpsw Td D Eofx Ah Hsg Gross content: 4219 l Perm. working temperature: 20 °C Length: 2000 mm Width: 2000 mm Height: 1800 mm Material: stainless steel Features: Manhole in the frame, spray head with spray head line and dummy cap DN 25, outlet flap, Pt 100 for automatic temperature control. height-adjustable tube feet; Magent valve for temperature control

Year of construction: 2000, condition: used, Stainless steel fermentation tank for approx. 20 hl net capacity; cooled by means of double jacket at the frame and at the bottom; flat conical; pressureless tank; firmly welded insulated. Additional title: coolable tank Gross volume: 2422 l Zul. Betriebstemperatur: 20 °C Length: 1700 mm Width: 1700 mm Height: 2000 mm Material: stainless steel Pedpfsw Td Drex Ah Hjgg Features: Manhole in the frame, spray head with spray head line and dummy cap DN 25, outlet flap, thermometer and Pt 100 for automatic temperature control height-adjustable tube feet; Magent valve for temperature control

Year of construction: 2007, condition: used, Mashing/lautering tun with side heating. The vessel was used in a distillery where 400 kg of malt grist was used to produce 15 hl of wort with 16.5°Plato. The lautering time was approx. 2 hours. Psdpsw Tdytsfx Ah Hogg Additional title: Heatable brewing vessel Inhalt: 3180 l Width: 1900 mm Height: 2550 mm Material: stainless steel 1.4301 Position: free standing Base construction: Cylindrical-conical vessel on pipe feet Features: Welded and ground insulating cladding, with operating platform, manhole in the hood, chopper with deflection gear and motor, spent grain chute, drop bottom, spent grain flap, shell heating surfaces, shell sight glass, temperature sensor

Condition: used, Upright stainless steel container with hinged lid and side outlet pipe. Additional title: vertical stainless steel vessel Gross volume: 1055 l Length: 1,30 m Width: 1,30 m Height: 1,40 m Pgedpfxow Tbwpj Ah Heg Material: stainless steel Position: vertical Features: hinged lid, side outlet

Year of construction: 2018, condition: used, 2-unit brewing system mounted on a stainless steel frame as a brewing block. This consists of the following components: - Stainless steel mash/lauter tun for mashing, mashing and draining the mash. Separate control of the thermo-oil-heated frame and bottom heating. The double-walled container is encased in insulating cladding and has a polished inner surface. The motor mounted on the top drives the chopper and agitator with infinitely variable speed control. A multi-part perforated false bottom is provided for lautering and a rectangular manhole on the side for sparging. In addition, the vessel is equipped with a hinged lid, CIP spray head, temperature probe and spray unit. - Stainless steel wort pan/whirlpool. The container is double-walled and has welded heating zones in the frame and bottom, which are heated with thermal oil. The vessel is also insulated and equipped with a temperature probe, hinged lid, CIP cleaning head, spray unit, height-adjustable lock and tangential wort inlet for knocking out. Polished inner surface. - Single-stage plate heat exchanger for cooling wort from 100 °C to 18 °C while simultaneously heating water from 13 °C to 77 °C. The wort from a brew can be cooled within approximately one hour. The plates are made of 1.4401 (AISI 316) stainless steel and the seals are made of EPDM. The wort cooler has a PT1000 temperature sensor. - Thermal oil heating for heating the laser-welded heating zones of the brewing vessels. In the thermal oil tank, approx. 50-65 l oil is heated electrically to a maximum of 150°C. A safety switch ensures that the heating is automatically stopped if the temperature exceeds 160°C. The vessel is equipped with a temperature and level probe. A pump circulates the thermal oil. - 12 hl hot water tank, standing separately on three feet, with a manhole on the top. The tank is heatable, insulated and equipped with a hose level indicator, temperature probe and hot water pump. - Centrifugal pump for product transfer between the tanks and for CIP cleaning with a motor power of 0.37 kW and infinitely variable speed control. - Stainless steel pipes and manual valves for diverting the product flows. The pipes are orbitally welded and have polished inner surfaces. - Control unit with 10" touchscreen and PLC for automation of the brewhouse, housed in a stainless steel control cabinet. The following processes can be controlled and monitored from here: 1. Switching the stirring and chopping unit on/off and speed control. 2. Temperature control of the mash/lauter tun 3. Temperature control for the pan/whirlpool (separate for bottom and frame) 4. Switching the product and CIP pumps on/off and speed control. 5. Display of inlet water temperature 6. Display of wort temperature at the outlet 7. Temperature control of the thermal oil tank 8. Setting of timers 9. Setting of the mashing programme (multi-stage mashing with up to 5 stages; setting of times, temperatures, rotation speeds of the stirrer and the pump) 10. Temperature of the hot water tank. Additional title: compact brewing block with warm water tank Cast wort capacity: 5 hl Power: 38 kW Length: 2877 mm Width: 1476 mm Height: 1952 mm Operation / Control: control cabinet with PLC and touch screen Material: stainless steel 1.4301 (AISI 304) Base construction: Brewing block on stainless steel frame, separate hot water tank Features: Mashing/lautering tun; wort kettle/whirlpool; plate heat exchanger; oil heating; centrifugal pump; pipes and valves; hot ... Psdpfx Ajw Tbmdsh Hsgg

Year of construction: 1997, condition: ready for operation (used), A complete brewhouse SSP Lichtenvoorde, purchased from the Paul Mueller Company, is available. Components: mash tun, lauter tun, whirlpool, working platform, CIP system, spent grain container, and wort pump. Brew length: 40hl, min. brew length: 25hl, min. part mash: 12hl, spent grain container volume: 2.5m³, brews: 2, pumps: 4, wort cooling pump type: E-Hygia-Bloctronic I/25b, CIP system tanks: 2, heat exchanger: Pfaduko VT20 , capacity: 26l, max. temperature: 100°C. The system is equipped with a brewhouse automation including Siemens OP37 and PROSYT control, but this is defective. If desired, the brewhouse can be purchased at an additional cost with newly installed control, automation accessories, and general overhaul. Documentation available. An on-site inspection is possible. Pgjdpfx Ahsxfvh Ss Hjg

Condition: excellent (used), Used pressure vessel with double jacket and insulation Last application: Food / Alcohol Item number: 10647 Volume: 150 L Type: horizontal Material (media-contact): 1.4404 / AISI316 Design: double jacket and insulated Manhole: 300x400mm Operating pressure: 8 bar Operating temperature: 50°C Tank dimensions: Outside diameter: 800x700mm Cylindrical height: 400mm Total height: 960mm Total width: 850mm Total length: 870mm Materials: Internal: 1.4404 / AISI316 External: 1.4301 / AISI304 Psdpfxjxdw Sie Ah Hogg Equipment: Nameplate: Yes Various connections

Condition: used, Year of construction: 1999, Item: A-9523 brix master Standardization unit for juice etc. Type APV Brixmaster 3 x 6,000 L/h Pjdpfx Ahjwbg Nns Hsgg Used unit Produced by APV since 1999.

Condition: ready for operation (used), functionality: fully functional, Up for auction is a complete brewery and bottling line comprising: - Brewery plant (including brewhouse, fermentation and storage tanks, and additional accessories) - Bottle filling line TECHNICAL DETAILS BREWERY PLANT Brewhouse Manufacturer: Shandong Year of manufacture: 2019 Capacity: 20-25 hl Components: mash tun, lauter tun, kettle/boiling wort kettle, whirlpool Valves: manual shut-off valves Wort cooler: 2-stage Hot water tank: included Fermentation and Storage Tanks Fermentation tanks: 6 units of 2,760 l each (CCT tanks) Year of manufacture: 2019 Insulation: included, with jacket cooling Operating pressure: 3 bar CIP-capable: yes Storage tanks: 12 units of 2,760 l each (horizontal tanks) Year of manufacture: 2019 Operating pressure: 3 bar Additional Equipment Malt mill: Shandong, 2019 Steam generator: Yano, Shanghai, 2019, output: 200kg/h, oil-fired Chillers (glycol): 2 units of 28 kW each, 2019 Glycol tank: included Reverse osmosis system: included Compressor: JAN, 585 l/min, 2020 KEG Filling KEG washer: with automatic caustic replenishment and steam heating KEG filler: up to 70 kegs/h Control: Siemens S7 Fitting: Type S (basket fitting) BOTTLE FILLING LINE Bottle washing machine: SEN Pjdpewxw U Nefx Ah Hjgg Year of manufacture: 1989, overhauled & installed 2020 Output: max. 1,500 bottles/h Isobaric filler block: Shandong Yuesheng, 2019 Stations: 14 rinsing, 12 filling, 5 capping stations Technology: with pre-evacuation and counter-pressure filling Format parts: for 0.33 l longneck & 0.5 l NRW bottles Dry tunnel: Shandong Yuesheng, 2019 Labeller: with laser printer Collection table: included

Condition: used, Additional title: Brewing vessels with copper hoods and hop dispenser, whirlpool and wort cooling Pgsdevcqufspfx Ah Hjg Capacity: 150 hl/brew Operation / Control: ProLeit / Siemens S7 Material: brew house vessels copper-covered Features: mash/wort kettle, mash/lauter tun, hop addition, vapor condenser system, whirlpool, wort cooler, various pumps and fittings

Year of construction: 1991, condition: used, The Filtrox Cross Flow microfilter works with a permissible transmembrane pressure of 6 bar (0 °C - 95 °C) and a filtrate volume of 4.5 - 7 hl/h with a filter surface area of 26.4 m². Two pumps (20 kW) in the unfiltrate circuit transport the medium to be filtered. With 16 hl agitator tank as cleaning tank. Additional title: yeast-beer recovery Capacity: 7 hl/h Tol. operating pressure: 10 bar Tol. operating temperature: 85 °C Max. filter area: 26 m^2 Current: 4,85/2,8 A Podpfx Asvcq Daoh Hogg Voltage: 220/380 V Frequency: 50 Hz Operation / Control: Simatic S5 Features: 8 ceramic membrane modules (total filtration area 26.4 m2); high-pressure pump; 16 hl cleaning tank with agitator; various pipes, valves, measurement and control technology

Year of construction: 1979, condition: used, Centrifugal high-performance kieselguhr filter with buffer tank, kieselguhr dosing vessel and peristaltic pump. Additional title: Kieselguhr filter Capacity approx.: 110 hl/h Pedpfjvcqmbex Ah Hsgg Vessel volume: 1550 l Operating pressure: 9 bar Operating temperature: 100 °C Operation / Control: Control cabinet with operating buttons Material: Stainless steel Features: Kieselguhr dosing vessel, 14,26hl; hose pump Periphery: buffer tank, vessel

Year of construction: 1988, condition: used, Cylindro-conical 965 hl fermentation and storage tank. - coolable, 1 x cone cooling jacket, 3 x side wall cooling jacket - swivel cone - stainless steel - insulated - short supporting skirt - deaeration and cleaning combination with safety valve - vacuum valve 12 tanks, also available individually or in partial quantities. Additional title: Outdoor tanks for storing fluids; years of manufacture 1988-1991 Pgedpfx Aovcqnlsh Hog Capacity: 96450 l Operating pressure: 2 bar Length: approx. 12400 mm Width: approx. 3950 mm Height: approx. 3950 mm Weight: 6220 kg Material: Stainless steel 1.4301 Position: vertical Base construction: short supporting skirt Features: 12 tanks; Cooling: 1 x cone cooling jacket, 3 x side wall cooling jacket; swivel cone; insulation; dearation and cleaning combination; safety valve; vacuum valve; temperature measurement

Year of construction: 1979, condition: used, Additional title: wort cooler Pgodpevcqtzefx Ah Hjg Capacity: 150 hl/h Pressure: 6 bar Max. temperature: 100 °C Length: 2550 mm Width: 900 mm Height: 2000 mm Weight: 1080 kg Material: stainless steel Base construction: on frame Features: 2-stage, connection widths: DN65 (wort, water) and DN80 (ice water) Periphery: wort aeration, mixing pump, booster pump (water),

Year of construction: 1985, condition: used, Pressurised tank cellar with 4 upright 324 hl stainless steel pressure tanks and with double-seat valve solution on the operating level. The tanks are cooled using ice water. Additional title: 4 pressure tanks Diameter/tank: 2550 mm Total height/tank: 7360 mm Cooling surface/tank: 25 m² Perm. working overpressure: 3 bar Systemic volume: 324 hl Length: 12 m Width: 4 m Height: 7,5 m Weight: 2585 kg Material: stainless steel AISI 304 Pedpfxevcqyno Ah Hsgg Features: Tank cleaning equipment with spray head, safety valve, pressure gauge, air valve combination; sampler, level indicator with valves, outlet valve Periphery: Inlet and outlet pipework via double-seat valves