Used blowers for sale (41)

Condition: good (used), Euroventilatori XTTRC801LG0 Centrifugal fan Fodetwdq Tjpfx Aalopg High output centrifugal fan, mounted on stand with 37Kw motor, 3Ph

Year of construction: 2020, condition: new, 7 "Touch Panel The large color touch panel looks aesthetically and is comfortable and intuitive to use. You will set all important parameters on it. Memory of 20 programs with 10 events It is possible to save up to 20 programs and activate up to 10 consecutive time-temperature events arranged in the heating curve. This is especially needed for more demanding processes. Information on gas / oil consumption The consumption is calculated based on the burner settings. This feature will allow you to estimate the cost of a given cycle, plan consumption and check personnel. Dual-channel recorder of USB cycle parameters Each furnace is equipped with a recorder that records all firing parameters, including two temperature channels - like in an airplane black box, on a USB flash drive. The system also enables the analysis of monthly / daily statements, including media consumption and performance. Each start of heating, opening the door, can be recreated, a few years back. Such a dedicated option is not offered by any manufacturer. It is a system developed from scratch by our programmers Automatic smoke exhaust chimney The chimney can be programmed to open a few minutes before the end of the firing in order to smoke the chamber. Fpodpfx Aasfz U Hvslsg It can be remotely controlled from the panel, it does not need to be done mechanically as in most structures. Minute forecast until the end The cycle has started, how long will it end? calculating the heating dynamics, we will count it and show on the display how much longer it will take. To open it, just pull the door. The lock has adjustable pressure of the door, to close it just push it, the lock will catch the door and automatically pull it back. In order to minimize the effect of heating the hall when opening the door, a hood is installed above the door to remove some of the heat to other places. The MTS system was created to provide a real reading of the temperature of the furnace chamber. Standard measurement is based on one temperature measurement which is often wrong.MTS is a system of many sensors located in the outermost places of the chamber. The multi-zone heating system ensures a firing quality that has been so far unique. Each normal oven has only one heating zone and only one temperature measurement! The multi zone heat system supports up to 8 independent heating zones in one oven. Each heating zone has as many as 3 temperature sensors! When there are temperature differences between zones, they are automatically equalized! The system helps to combat the problem when elements of different material thicknesses enter the furnace.

Condition: like new (used), Year of construction: 2018, Complete Aerzen D17L and D28L units for sale. Year of manufacture: 2018, in perfect condition, equipped with 15 kW and 22 kW motors. Warranty included. For more information, please contact me by phone or email. Fpedpfolnlr Eex Aaleg

Year of construction: 2020, condition: like new (used), For sale GM 3 S and GM 4 S unused perfect condition Fsdswr Tzrspfx Aalopg Gm 3S - 2 pieces GM 4 S - 6 pieces

Year of construction: 2008, condition: reconditioned (used), Vacuum Blower GM 90SM after Regeneration, Fjdpfsv Rmpujx Aalspg Perfect condition -900 mbar 85m3/min 12-month warranty

Year of construction: 2025, condition: new, New Aerzen gm 35s stage Fpodpex Hhzcefx Aaljg

Year of construction: 2015, condition: new, FP1251 N4S RD90 Centrifugal Fan Purchased as a replacement fan, never used. Fpsdpspr U Hbsfx Aaljg Manufacturer: F.lli Ferrari Ventilatori Industriali S. p. A. Direct drive power 200 kW maximum speed: 1700 1/min dynamic pressure: 7300 Pa flow rate max. 23,3 m3/s maximum medium temperature 180 degrees C

Year of construction: 2003, condition: excellent (used), 1 piece radial blower Manufacturer: Turbowerke Meissen Howden Model: LRN 0800 W 100/11 GR360 Volume flow: 56000 m³/h Pressure increase: 2000 Pascal at 20°C Rotational speed: 1000 rpm Shaft power: 37 kW Weight: 1850 kg Year of construction: 2003 Fpedpekn H Izefx Aalsg Dimensions: Width: 2400 mm Length: 1530 mm Height: 2040 mm Diameter suction side: 800 mm Shaft height without spring buffer foot: 1250 mm dimension pressure side: 700 x 700 mm including 360 ° rotatable suction side and transition including compensator for pressure side. No damage or wear. Frequency converter optional also possible.

Year of construction: 2007, condition: excellent (used), 1 piece Radial blower with pre-shaft and cooling disc for warm and also dusty air. Manufacturer: Scheuch GmbH Austria Model: vdk90 1000-fb14 Volume flow: 71060 m³/h Pressure rise: 1673 Pascal at 250°C (0,637 kg/m³) Rotational speed: 1460 rpm Shaft power: 40,5 kW Weight: kg Year of construction: 2007 Insulation with rock wool and galvanized sheet. Dimensions: Length: 3250 mm width: 2400 mm Height: 2000 mm Diameter suction side: 750 / 980 mm Fsdpfekvpfhex Aaljpg Shaft height without spring buffer foot: Dimension pressure side: 980 x 780 mm including compensator for pressure side. No damage or wear. Only the color inside is off due to the heat.

Year of construction: 1995, condition: good (used), Radial blower from Venti Oelde with intake silencer. Fpjdpfed Nqlcex Aaleg !! Characteristic as picture attached!! Volume flow: 46308 m3/h Pressure increase: 4830 Pa / 48.3 mbar Weight: 2750 kg Temperature: 30°C Speed: 1480 rpm Engine: VEM 415 S4 Power: 110 kW

Condition: excellent (used), Year of construction: 2017, Venti Oelde High performance centrifugal fan Manufacturer: Venti Oelde Type: HRV 45-224 / R GL 360 Fodpfxswxu Rnj Aalepg Type: High-performance centrifugal fan V: 2559 m³/h 12 bar t: 300 C p: 0.608 kg/m³ Pw: 0.9 kW nv: 2840 1/min Weight: 180 kg Year of manufacture: 2017 You can find more items - new and used - in our store! International shipping costs on request!

Condition: good (used), Year of construction: 2019, Nicotra Gebhardt P2M Process Air Fan Fpsdpfexl Sr Tsx Aalog Direct-drive, clutchless, single-inlet fan Robust industrial designs Durable, easy to maintain High efficiency, quiet operation Customized solutions at a standard price Certified and assured quality according to ISO 9001 Technical data measured according to DIN 24163 Accuracy class 2 according to DIN 24166 Volted casing Robust welded construction Casting positions in 90° increments Customized installation position Central impeller Impeller diameter 500 mm Backward-curved blades Welded Dust-resistant Materials: Coated steel, hot-dip galvanized, stainless steel 1.4307 ATEX: Category 2 and 3; Gas and Dust Manufacturer: Nicotra Gebhardt Flow rate: 8000 m³/h dPt: 1070 Pa Density: 1.2 kg/m³ Tmax: 80 °C n: 1460 rpm n max: 2511 rpm PW: 3.10 kW Ins/Eff = B/total N (13/15): 61/64 ETA opt: 71.8 N actual: 76.4 Motor power: 4 kW Directly flanged drive motor Mains connection: 400 volts 50 Hz Weight: 195 kg Year of manufacture: 2019 Find more items - new and used - in our shop! International shipping costs on request!

Year of construction: 1987, condition: good (used), Keller Lufttechnik MKR 063-55 fan  Air flow rate: 37,000 Nm³/h Total pressure difference 3400 Nm³/h Spec. gas weight at 20 degrees: 1.2 kg/m³ Motor power: 55 kW Fedpfx Ash Dpxaealopg Fan speed 1475 /min  year of construction: 1987 Item condition: used Further articles - new and used - you will find in our shop! International shipping costs on request!

Condition: used, Aerzen Blower GMA 11.4 Power: 10kw RPM: 2300 Capacity: 420m3/h Fpodpowq Sx Hefx Aaleg Pressure: 1 bar Diameter inlet: 100mm Diameter outlet: 100mm Approx Dimensions: 1300mm X 800mm X 1100mm

Condition: used, Aerzen Blower GMA 11.4 Complete with ancillary equipment Fedpfx Aajwq Sydelopg

Condition: new, New equipment: 1 EUROVENTILATORI fan, BPR 632/A: - 5.5 kW at 1440 rpm, - inlet: Ø636 mm, - outlet: 630 x 450 mm (2 available) Fpodpfjxp Hpzex Aaleg