Used Beverage production for sale (935)

Condition: used, Year of construction: 2007, Overview These two Velcorin dosing systems (models VDT 50 L and II G B5 MID 50 C with touch panel) were developed by Lanxess for beverage preparation. The systems have a dosing pump that precisely doses the Velcorin preservative and is designed for industrial use. Both systems have already been dismantled and are ready for collection. However, one of the systems can only be used as a spare parts dispenser. Technical details  Capacity (beverage volume): 85 - 504 hl/h Power supply: 230 V, 50-60 Hz Power consumption: Maximum 2000 VA Condition: One unit intended for use as a spare parts dispenser, one in ready-to-use condition Availability: Ready for immediate collection Inspection: Possible on request Scope of delivery   VDT 50 L + Touch Panel | Screen defective II G B5 MID 50 C + Touch Panel | Last maintenance: 11/2022 Fobvbf Ssu Hux Togegb

Condition: used, Year of construction: 2002, Overview  This model USP-2 blow molding machine was manufactured by UROLA in 2002 and is designed for the production of PET bottles with a throughput of 800 bottles per hour for 5-liter bottles and 2,200 bottles per hour for 1-liter bottles. The machine has already been dismantled and stored and can be viewed by appointment. It supports the production of bottles in sizes from 250 ml to 5 liters. Technical details   Output: 800 bottles/hour (5-liter bottles) 2,200 bottles/hour (1 liter bottles) Formats: 250 ml to 5 liters Weight: 3,500 kg Condition: Already dismantled and stored Inspection: Possible by appointment Fjbvbju Huydof Sgogb

Condition: used, Year of construction: 1995, Overview  This bottle washer was built in 1995 by Swiss manufacturer PAC. The machine is out production and be viewed in person in our warehouse. Techn. Details Capacity:  6,000 bph Min/ Max: 3,000 bph – 6,300 bp Bottle type: 0,5L, Euro, NRW, incl. Set of parts for 330ml vichy bottle Bottles per row: 12 Bottles in the machine: 1,080 Bottle cell carriers: 96 Dimensions:  Length: 6,000 mm Width: 1,545 mm Height: 2,175 mm (without feet) Weight: approx. 5,800 kg Water consumption: 3,6 m³/h Heat consumption 80°C: 480 kJ/ h x 1000 Electrical consumption: 11 kW Incl. Spare parts Motors for rear and front drive Bottle cell carriers Wear parts Machine body fully in stainless steel All hot zones with 5cm insulation Label extraction belt Heat exchanger in stainless steel for low pressure steam 116°C-120°C at 0,7 - 1 bar Self cleaning spray tubes in stainless steel Fjbevl Huaovbf Sgegb

Condition: used, Year of construction: 2007, Overview The Enoveneta TOP 15 is a grape de-stemming and crushing machine specially developed for use in wine production. It offers a capacity of 15-16 tons per hour and has a robust design made of AISI 304 stainless steel. The machine has been offered for sale due to non-use by the owner and is in good condition. Technical details  Capacity: 15-16 tons/hour Energy supply: Standard voltage 400/3/50 Motor power: Stalk remover: 2.2 kW Motorized auger: 0.55 kW Weight: 300 kg Dimensions: Length: 2,700 mm Width: 1,000 mm Height: 1,500 mm AISI 304 stainless steel frame on castors Perforated cylinder made of AISI 304 stainless steel with holes in sizes 25/22, 22/22, or 22/18 Functions  De-stemming: separation of the grapes from the stems through a perforated cylinder Crushing: Adjustable beater bar for gentle processing Removable beater bar and cylinder for easy cleaning Juice extraction: Integrated juice extraction system Speed control: Variator for dosing auger and stalk remover Accessories Open lid with removable whipping boom and cylinder Electric control panel Fgjbvbf Seu Tyzqjgeb

Condition: used, Year of construction: 2023, Overview  The Hiwell AMF 600-V Automatic Food Forming Machineis used for forming and portioning of different products by a moulding plate system. Servo feeding system  Feed screw adopts servo control system to prevent crushing materials and deliver higher reliability. Servo mold plate drive system  With high repeated positioning accuracy, servo operated mold plate drive system ensures high reliability at a fresh of 100 strokes/min. The food forming machine is equipped with fewer wearing parts to reduce your usage and maintenance cost. Stainless forming platform The forming platform is made by stainless steel plate. With high precision of processing and positioning, the forming platform ensures the stable and high-speed running of mold plate system. Hydraulic fast filling system  Imported hydraulic filling system and high-precision filling cavity can rapidly fill the mold plates with no material leakage. Touchscreen control The touchscreen control system features new operation interface, multiple languages input, easy parameter setting, auto data storage, auto fault diagnosis, EtherCAT bus control and high-speed data communication. Good compatibility with metal mold plates  Metal mold plates have excellent wear resistance, long service life and less material leakage. The food forming equipment is able to process a wide range of products including meat, fish, potatoes and vegetables as well as bakery. High productivity and operationality  Fuzzy design software can automatically match the forming speed with conveyor output speed, ensuring the consistency of products in whether small or high volume food forming process. Technical Details  Belt width    600mm Air/water pressure    6Bar/2Bar Power    28.12kW Production capacity    800-1600kg/h Speed    50-100 strokes/min Product thickness    6-40mm Product weight error    ≤1% Max. diameter of product    150mm (for burger) Filling pressure    3-15Mpa adjustable Overall dimension    3170x1176x2430mm Scope of delivery Forming machine | AMF 600-V | HIWELL | 2023 Column loader |  HIWELL | 2023 Fgsbeu Tyzwsvbf Sgsb

Condition: used, Year of construction: 2017, Overview  This semi-automatic new glass pusher was built in 2017 by the German manufacturer Alwid. The machine is professionally stored and can be viewed in person at any time. Technical details Semi-automatic new glass pusher with interchangeable gripper units 4 heads: adjustable depending on the layer pattern ALWID FEEDING TABLE + ALWID DEPALLETIZER Fsbvbf Sevtpc Aegjgb

Condition: used, Year of construction: 2000, Overview This vacuum filler, type: Vemag Robby 1 was built 2000 in Germany. Vacuum filling machine for filling, portioning, linking with pc control. Technical Details Power supply: 220-380 V/ 50-60 Hz, 5.1 Kw Approx. weight: 425 Kg Scope of delivery Vacuum filler | VEMAG | Robby 1 | 2000 Fgsbvjvtqqzebf Sgsb

Condition: used, Year of construction: 2005, Overview This transport conveyor, type: Singer -Special was built in 2005. Technical Details belt width: 300 mm, total dimensions: approx: 5000 mm x 500 mm. Height start: approx: 200 mm Height end: approx: 900 mm Scope of delivery conveyor | Singer | Spezial | 2005 Fgebsvt S Uusvbf Sgsb

Condition: used, Year of construction: 2008, Overview This grape de-stemming and crushing machine type BETA160R was manufactured by VEMA/ITALCOM. With a capacity of 16 tons per hour, it is ideal for processing large quantities of grapes (especially green grapes). The machine has already been dismantled and stored and can be inspected on request. Technical details  Capacity: 16 tons/hour Power supply: 200V Rated power: 3.3 kW Weight: 320 kg Fsbvbfou Emgmo Sgsgb

Condition: used, Year of construction: 1992, Overview The mixer was manufactured in 1992 by German company KHS. The machine is suitable for inline operation, also for natural beverages and is already dismantled. Components Carbonation tank Degassing tank Syrup tank Techn. Details Capacity: 31.500 L/h Realizable mixing ratios 1:5, 1:3, 1:1 Maximum realizable CO2 content: 8g/ L No CO2 & Brix measurement Control S5 Fgobvoph Inksbf Sgeb

Condition: used, Year of construction: 2021, Overview The filling line was manufactured in 2021 by the German company ALWID. The filling line is new and can fill  chemical products into plastic containers. With the exception of the bottle feeder and Posimat, glass bottles can also be processed. Due to ATEX certification, explosive products can be processed with the line. The equipment comes with a 2-year warranty (in single-shift operation) and all components of the equipment can be purchased separately.  Technical details Capacity: 9000 containers/h (varies according to bottle volume and product).  Container  Max. Diameter: 100mm  Max. Height: 300mm  Control Siemens S7 Single machines  Bottle Hopper | ALWID | POSIMAT-ACCESS-N15  Bottle feeder with hopper 2000 l, in stainless steel, chassis and supports in mild steel painted Positronic control system for optimal adaptation to downstream filler Machine, completely internally wired with attached control cabinet in mild steel, painted Machine according to CE guidelines; i.e. max. noise level of ≤ 80 dB +/- 2 Combined filling and closing machine (block machine) | ALWID | SUPERIOR-16MDM-5SK Fully automatic rotary filler Filling system: mass flowmeter system, type: Endress+Hauser LPG MASS Number of filling stations: 16 filling stations Filling valve diameter: Ø12mm Max. tank dimensions: height: 50-300 mm, Ø: 20-100 mm Fully automatic round capper Number of capping heads: 5 With torque adjustment via slip clutches With fully automatic cap sorting and cap feeding via BONINO disc sorter with elevator With inside drop switch to switch off the machine in case of missing closures Checkweigher | ALWID | OCS-HC-M-2000-1 Applied safety and machinery directives CE compliant Industrial load cell with stainless steel housing based on the principle of electromagnetic force compensation Force shunt free current transfer at the load cell Front protection to reduce interference on the weighing result Stainless steel control cabinet Graphics-capable color TFT touch screen, 10.4 inch, VGA resolution Flexible operability due to tiltable stainless steel operator terminal Freely configurable user interface with simple, intuitive operation Inkjet Printer | Domino | Ax350i  Fast printing of text and multi-line codes at high speeds  Labeler | ALWID | SES-120-III Tandem design Max. Label height: 120mm  Photocell for label scanning 2 x automatic winding station incl. counter pressure plate Mounting device with height adjustment for lateral label dispensers With adjustable side guides - passage width up to 150mm Febvbf Ssmfqm Degogb

Condition: used, Year of construction: 2006, Overview  The filler and capper block was built in 2006 by the German manufacturer Filltec.  Techn. details  Number of filler places: 32 Number of capping stations: 8  Magnetic cap elevator for crown corks Mains voltage: 400 V   Frequency: 50 Hz  Auxiliary voltage: 24 Volt DC  Electr. protection class: IP 54 Fgobjm U R Dasvbf Sgsb

Condition: used, Year of construction: 2008, Overview  The machine was built in 2008 by the former manufacturer SIG Corpoplast (now KHS). The machine is still in operation and can be inspected at any time. Technical data Capacity: last 21.115 bph (at 1,5l)  Formats: 500ml, 750ml, 1.000ml, 1.500ml  PCO 1881  Operating voltage: 400V/ 50 Hz   Control voltage: 24 VDC  Scope of delivery  Blow molding machine | SIG Corpoplast | BLOMAX 12 | 2008  Preform feeder | Transver AG | - | 2008 Silo  Elevator  Sorting Chute Fsbeplgmbsvbf Sgsgb

Condition: used, Year of construction: 2018, Overview  The gravity filling machine is a rotating machine that works automatically and is suitable for filling bottles, cans made of zinc sheet or jars. It is used to add liquids (such as brine, oil, vinegar, sauce, sugar water, etc.) into containers filled with solids. It is also used to fill empty bottles. The filler block can be viewed at any time.  Technical details  Number of filling places: 48  Pitch circle diameter: 1560 mm  Capacity (last):  250- 300 bottles/ min at 500ml fruit syrup. For used twist-off cap an additional capper would have to be organized  160 - 200 bottles/ min at 250ml maple syrup  Used plastic cap can be applied by installed AROL capper  Dimensions  Length: 3.000 mm Width: 2.500 mm Height: 2.500 mm Weight: 6.500 kg   Electr. characteristics Voltage: 400 V - 50 Hz  Auxiliary voltage: 24 V DC  Installed power: 20 kW  Scope of delivery  Filler | Zilli& Bellini | GD48/12 | 2018 Capper | Arol | TSI - EURO VP - W6 | 2018 Fgsbvbf Sjnhikisgob

Condition: used, Year of construction: 2013, Overview  The labeler was manufactured in 2013 by the German manufacturer Gernep. The machine was regularly maintained by OEM and had a full renovation in the end of 2019. The labeler is already dismantled. Technical details  Output: approx. 8,500 bottles/h   Formats 33 cl Vichy – Longneck – 30 cl BNR ; Neck, front and back label. 2 different front label format parts 33 cl longneck; 75 cl Bierre Belge bottle Corked; Neck, front and back label. Stainless steel bottom frame Rotation: clockwise Right to left bottle transport 5912 running hours Air driven glue pumps replaced by electrical driven glue pumps. Fgebvbf Ssrb Stmegob

Condition: used, Year of construction: 2021, Overview  The bottle unscrambler was manufactured in 2021 by the German company ALWID. It is part of a new filling line and can fill chemical products into plastic containers. The machine has ATEX certification, which allows it to handle explosive products. The machine can be purchased with warranty.  Technical data  Capacity  12.000 bph at 50 ml HDPE, oval 43 x 23 x 95 mm  14.000 bph at 250 ml HDPE, Ø60 mm x 126 mm Incl. 2 format sets for processing the above mentioned bottle sizes. Bottle sizes Fully enclosed cabin, machine frame and wall panels in stainless steel Floor frame in mild steel, painted (similar to RAL 9006 silver gray) Quick access due to large doors as well as quickly removable panels Rejection of defective bottles  Easy format changeover due to quick-change system without tools Siemens S7 control system  Bottle loading system with hopper 1000 l, in stainless steel, chassis and supports in mild steel, painted Positronic control system for optimum adaptation to downstream filler Fobvemk I Dwjbf Sgjgb

Condition: used, Year of construction: 2021, Overview Cold storage cell with floor insulation Technical data  Temperature range: -1°C to -20 °C  Dimensions (width x depth x height): 7,40m x 15,80m x 3,23m Insulation panel: 100mm | 0,23Wm/ K  Non-slip, waterproof, food safe floor Incl. LED lighting + mounting bracket Fgsbvbf Ssl Hxn Rogeb

Condition: used, Year of construction: 2018, Overview The ALWID-KRONE-HV is a semi-automatic filling machine working with high vacuum. This model is suitable for filling still media into dimensionally stable containers. Many bottle shapes and sizes can be used, no format parts required. The filling level is set directly on the valve, so it remains constant regardless of the bottle volume. Vacuum level adjustable. Tech Specs: Filling points: 2 Filling valve diameter: 13 mm Suitable for filling highly viscous media Fields of application: food, beverage, pharmaceutical and chemical industry Febvol Hx Dbsbf Sgegb

Condition: used, Year of construction: 1998, Overview The bottling line is located at a German winery and is no longer in operation. It is available because the seller has purchased a larger plant. Bottled were 1l Schlegel bottles with MCA closure.  Plant in detail  Bottle cleaning  Manufacturer: SeitzEnzingerNoll Year of construction: 1988 Type: TAUCH + STELLA  Drying tunnel Manufacturer: SeitzEnzingerNoll Year of construction: 1987  Type: REGA1  Filler  Manufacturer: Sen compacta-h 12 bottle cells Few operating hours  Screw capper  Manufacturer: Adelski  Year of construction: 1998 Type: PP2001 S MCA capper Labeler Manufacturer: MAG  Year of construction: 2000  Sorting table  Transport Fobvbf Sel Hx H Njgjgb

Condition: used, Year of construction: 2015, Overview The tray packer was built in 2015 by Italian manufacturer Atlanta. The machine is in a good condition, already professionally dismantled and stored in a warehouse. Techn. Details Capacity: 15 trays per minute Specifications: Currently entry on single lane Full set of new parts for entry on double lane included in supply For carton thickness: 2 to 5 mm Flap closes from the bottom Current configuration:             for bottles PET 0.25L & 0.50L 4 packs/tray in 3x4 for 0.25L bottles 4 packs/tray in 2x3 for 0.50L bottles in carton neutral or printed Machine control: Siemens S7 touch screen Machine equipped with entry & exit conveyors Fgsbvberkgzksf Sgjb

Condition: used, Year of construction: 1998, Overview This tumbler, type: Injectstar Magnum 1500 is the perfect massaging Unit in a space-saving compact design for processing all types of meat with and without bones. Equipped with loading unit for 200l bins and integrated cooling aggregate. Technical Details Volume of the machine 1500 liter massaging capacity 675 kg Computer control of working and pause mode Automatic loading Automatic unloading Vacuum 0 – 95 % Vacuum system with filter Width 2 800 mm Length 1 500 mm Height 1 950 mm Installed power: 4,7 kW Voltage: 380 V, 50 Hz Weight 1000 kg Scope of delivery Tumbler with cooling and loading| Injectstar | Magnum 1500 | 1998 Fobvoumzpkobf Sgsgb

Condition: used, Year of construction: 2019, Overview  This 40-foot refrigerated container was manufactured in January 2019 and is in very good condition. It has a refrigeration system that allows temperatures from -30°C to +30°C and is equipped with a 32 A power connection. The container shows minimal damage and was last serviced in December 2021. The unit works perfectly and the interior is illuminated. The container is easy to clean thanks to the Easy Clean Paint. Technical details  Year of construction: 01/2019 Maximum load capacity: 29,560 kg Tare weight: 4,440 kg Cooling range: -30°C to +30°C Coolant: R 134a Power connection: 32 A heavy current Last maintenance of the cooling system: 12/2021 Interior lighting  Easy cleaning with Easy Clean Paint  Fjbvbfeuwz Hre Sgjgb

Condition: used, Year of construction: 2023, Overview  The Wild Goose Dual Lane EVO - EU 10 filling line is an automated can filling machine. The line features automatic lid placement, a CO₂ purge station and patented sealing and capping systems to reduce oxygen ingress.  Technical details  Output: 100 cans/min  Dimensions: 3317 mm length x 1041 mm width x 2769 mm height (height 2286 mm without lid tubes) Weight: approx. 635 kg Electrical power: Three-phase, 200V-240V, 18A at 208VAC, 50/60 Hz Compressed air requirement: Clean, dry compressed air at 6.2 bar and 650 l/min; requires air dryer and coalescence filter Lid placement: Automatic, with intelligent lid detection system Filling station: Automatic CO₂ flushing and filling Fsbvsu H R Nuebf Sgsgb

Condition: used, Year of construction: 2003, Overview The blowmoulder was built in 2003 by the manufacturer SIPA. The machine is still in operation and can be visited. It is used in a mineral water factory. The blowing machine is in good condition due to regular maintenance and technical upgrades, which have been well documented. Technical data  Nominal capacity: 24,000 bph for each format Nr. of moulds: 20 Last used formats: 0,33l (2 sets) 0,4l 0,5l (4 sets) 0,75l (2sets) 1,0l Dimensions: 7600 x 4200  x 4400 Weight of empty machine: 18,5t Weight of full machine, working condition: 24,5t Blowing air recovery system Overhaul for about 200,000 € recetly performed 161800 operating hours Scope of delivery  SFR 20 Preform feeder Preform hopper Spare parts vrious sets of moulds Documentation Program backup Febvbf Sou Nph Ijgsgb

Condition: used, Year of construction: 2018, Overview  The Gruber AFD6 is a filling machine for bottles and party KEGs that was produced by the German manufacturer Gruber in 2018 and has an operating time of 725 hours. The machine is available immediately. Technical details Output 800 bph (at 0.33l) 750 bph (at 0.5l) 600 bph (with 1.0l) 400 bph (for 2.0l) 240 bph (with 5.0l party KEG) Output varies depending on CO2 content and beer temperature (in practice, 1,000 bph could be achieved at 0.33l) Long tube filler with 6 filling points Fully automated filling process Single or double CO2 flushing Siemens S7 control system with touch panel Operating hours: 725 hours Fgjbvbfou I Hr Uo Sgob