Used Horizontal band saws - half-automatic - cutting range 0-300mm for sale (114)

Condition: used, Technical details: cutting diameter: 260 mm Cjb Hc I Aoizlg Eo Tjrb total power requirement: 4 kW weight of the machine ca.: 1,8 t cutting speed: 20-140 m/min cutting length min.: 10 mm

Condition: ready for operation (used), Year of construction: 1995, Functionality: fully functional, saw band length: 2,450 mm, saw band width: 27 mm, type of input current: three-phase, Carif band saw machine, has been checked and ready for a new lifecycle. New parts on machine: - Hydraulic pump - Drive wheel sawblade - Miter degree band Brand: Carif Type: 260 BSA Year of construction: 1995 Cobewb Aypo Hc I A Tjrb Main voltage: 400V Bandsaw dimensions: 2450x27x0.9 mm Cutting speeds: 2 ( 33 / 66 m/min ) Capacity: See images Machine dimensions: ± 1200 x 700 mm Machine weight: ± 320 kg Warranty: 2 months

Condition: new, With this machine, craftsmen and small workshops can enjoy quality. Description: • Robust metal band saw for top-quality saw cuts • For sawing steel, stainless steel, and aluminum profiles • Miter cuts up to 60° left • Easy, clear miter adjustment with scale • Saw blade speed adjustable in 2 steps • Quick-action vise with quick-action clamping device • Carbide blade guide • Built-in blade tension control • Ergonomic industrial handle • Automatic electric coolant system • Machine base made of sheet steel construction with front door • AutoCut system with hydraulic cylinder, feed control, spring assembly, and limit switch - Automatic saw frame lowering via the hydraulic cylinder with continuously adjustable feed and limit switch at the end of the cut - Rapid lowering of the saw frame from the rest position to the workpiece, then switching to normal saw feed (e.g., for marking) - Manual operation: The hydraulic cylinder acts as a brake cylinder (e.g., for notching). The brake cylinder allows the saw to be positioned in any position during the return stroke. Technical specifications: Supply voltage: 400V/50Hz Motor power: 1.2kW Feed rate: continuously adjustable Saw blade speed: 35/70 m/min Saw frame lifting: manual Saw blade dimensions: 2,455x27x0.9mm Working height: 915mm Cutting angle: 0 - 60° Cutting range 90° round: 220mm Cutting range 45° round left: 150mm Cutting range 60° round left: 90mm Cutting range 90° rectangular horizontal: 230x185mm Cutting range 45° rectangular horizontal left: 150x210mm Cutting range 60° rectangular horizontal left: 90x100mm Cutting range 90° square: 210mm Cutting range 45° square left: 150mm Cutting range 60° square left: 90mm Dimensions: approx. W870xL1,550xH1,740mm Weight: approx. 240kg Cjb Hc Iewbdz Ue A Tjrb We are happy to offer customized solutions such as suitable roller conveyors, material stops, and length measuring systems upon request. Please contact us by phone if necessary or simply send us your inquiry by email using our contact form. Our trained staff is also available at any time for advice and product selection.

Condition: as good as new (ex-display), Year of construction: 2023, saw band length: 2,950 mm, saw band width: 27 mm, type of input current: DC, cutting capacity: 285 mm, cutting range round at 45°: 230 mm, cutting range round at 90°: 250 mm, Title MEP SHARK 282 CCS [with semi-automatic lowering] Article number SH282CCS Motor power 1.5/1.8 kW Belt opening 285 mm Belt dimensions 2950x27x0.9 mm Weight 440 kg Speed 36/72 m/min. Cutting surface 0° 250 / 220x220 / 280x220 Cutting surface 45° right 230 / 200x200 / 220x200 Cutting surface 45° left 200 / 170x170 / 200x140 Cutting surface 60° right 120 / 80x80 / 140x80 Cutting surface 60° left Description MEP sawing machine: Basic equipment: Vice with quick adjustment and adjustable guide rails Hydraulic band clamping device with clamping pressure indicator Underframe with removable coolant tray Chip clearing brush Adjusted precision stops for cuts of 0°, 45° and 60° left and 45° right Length stop for cuts of the same length Material support arm, simultaneous connection option for roller conveyor/loading side Turntable for double mitre cuts Machine is designed for pallet truck/forklift transport M2 bi-metal band saw blade for solid and profiled material Tools and operating instructions Electrical equipment: Control panel Crob Howa Spdoc I A Tjb labeled cable connections Control lamp for operational readiness Main safety switch Emergency stop button Speed changeover switch Thermomagnetic protection Undervoltage release Control handle IP 55 protected Phase comparator Low voltage system 24 Volt Electrical coolant system 48 V (attachment of a micro-spraying device possible) Motor 1.5/1.8 KW 2 speeds 36/72 m/min. Vice opening 285 Saw band 2950 x 27 x 0.9 Weight 440 kg

Condition: excellent (used), Year of construction: 2015, operating hours: 200 h, Functionality: fully functional, saw band length: 3,100 mm, saw band width: 27 mm, total height: 2,100 mm, total length: 1,800 mm, total width: 950 mm, cutting speed: 50,000 mm/min, cutting capacity: 290 mm, cutting range round at 45°: 240 mm, overall weight: 570 kg, Metallkraft Semi-Automatic Bow Metal Band Saw BMBS 290 x 320 HA-DG-F BMBS 290 x 320 HA-DG-F - Semi-automatic bow metal band saw for miter cuts from -60° to +45° For sawing materials such as stainless steel, tool steel, hollow profiles, and solid materials Extremely stable and robust construction With hydraulically controlled sawing functions Machine drive with low-maintenance, oil-lubricated worm gear Ball-bearing turntable With robust three-phase motor Motor equipped with overload protection Saw blade guide with adjustable carbide inserts With cleaning brush for optimal cleaning and maintenance of the saw blade Hydraulic vise with manual quick-clamping device for the material and quick-clamping device for lateral adjustment of the vise With STOP function - the sawing process can be interrupted at any time by pressing a switch. The blade runs freely and the arm returns to the zero position without opening the vise or shutting down the machine. F version with frequency converter: allows continuous adjustment of the saw blade speed from 20 - 100 m/min. Saw arm tilted by 25°, thus extending the saw blade's service life. Shown with optional workstation lighting, item no. 364 0012 The vise clamps automatically after starting the process. After the cutting process, the vise opens automatically. With limit switch for setting the lower end position of the saw arm during cutting. After reaching the lower end position, the saw arm automatically returns to the set starting point. The upper end position of the saw arm can be adjusted using a limit switch. Swivel saw arm from -60° to +45° Metallkraft semi-automatic bow-type metal band saw BMBS 290 x 320 HA-DG Metallkraft semi-automatic bow-type metal band saw BMBS 290 x 320 HA-DG Scope of delivery Saw blade Operating tool Length stop Model BMBS 290 x 320 HA-DG F Item no. 369 0039 Technical Specifications Motor Power 400 V / 50 Hz 2.2 kW Speed Levels Continuously Variable Saw Blade Speeds 20 - 100 m/min Saw blade dimensions 3100 x 27 x 0.9 mm Footprint (L x W x H) 1800 x 950 x 2100 mm Material feed table height 940 mm Weight 570 kg Max. feed length at 1 feed - Min. remaining workpiece length in CNC operation - Min. remaining workpiece length in manual operation - Cutting capacities 0° - round tube material 290 mm 0° - solid round tube material 180 mm 0° - horizontal square material 320 x 290 mm 0° - vertical square material 320 x 290 mm -45° - round tube material 240 mm -45° - solid round tube material 110 mm -45° - horizontal square material 240 x 150 mm -45° - vertical square material 210 x 290 mm -60° - Round tube material 150 mm -60° - Solid round tube material 80 mm Crjb Hc Iswa Dm Uo A Tob -60° - Horizontal square material 150 x 180 mm -60° - Vertical square material 130 x 290 mm +45° - Round tube material 240 mm +45° - Solid round tube material 110 mm +45° - Horizontal square material 240 x 100 mm +45° - Vertical square material 150 x 290 mm Bundle size - Round tube material X Bundle size - Solid round tube material X Bundle size - Horizontal square material 320 x 160 mm Bundle size - Vertical square material 320 x 160 mm

Condition: ready for operation (used), Berg & Schmid VGS 500 HA-i Vertical Miter Band Saw Metal Band Saw Miter Adjustment Cutting ranges: 90° round 330mm, square 330mm, cross-section profile 330x160mm/320x300mm, vertical profile 160x160mm, rectangular 500x330mm, 45° left, round 300mm, square 300mm, cross-section profile 330x160mm/320x300mm, vertical profile 180x160mm, rectangular 300x330mm, 45° right. Approx. 3 Blade length: 4115 mm Blade width: 34 mm Blade thickness: 1.1 mm Saw blade speed: 18 - 110 m/min, continuously variable Blade dimensions: 4140 x 34 x 1.1 mm You are welcome to come by for a viewing. We would be happy to arrange a cost-effective shipping service for you! Cebjwaz Ebs Hc I A Tjrb You will receive a proper invoice. For international customers, a net invoice can also be issued. A valid VAT identification number is required. Subject to prior sale. Visit our shop and check out our other offers. The company names and trademarks mentioned are the property of their respective owners and are used solely for identification and description purposes. Deviations from technical specifications and errors in the description of the item may occur and are reserved.

Condition: new, Optimum OPTIsaw SD 351 AV Semi-automatic double miter metal band saw With Siemens inverter drive. Professional and robust saw with a cutting capacity of up to 350 mm Description: Heavy industrial design Quiet running Manual or semi-automatic operation Infinitely adjustable saw band speed from 0-80 m/min. High cutting accuracy thanks to vibration-free operation Miter adjustment up to 60° by swiveling the entire saw frame With high-quality bi-metal saw blade as standard End stops adjustable to the degree chip brush Micro switch for automatic limit switch Roller support adjustable for long and heavy workpieces coolant pump Ball-bearing saw band guide with hard metal plates for optimal cutting results Easy adjustment of the lowering speed using the feed control valve on the control panel Generously dimensioned, hydraulic quick-release vice, self-closing, adjustable for large cross-sections Fully equipped machine; The user can work productively immediately after commissioning EMC class C2 2-channel safety chain with emergency stop Converter Siemens Sinamics G110M Functionality semi-automatic operation Closing the vise and activating the motor Lowering the saw frame for cutting The motor stops and the saw arm returns to the starting position Technical specifications: Dimensions and weights: Length (product) approx.: 1935mm Width/depth (product) approx.: 1425mm Height (product) approx.: 1626mm Weight (net) approx.: 600kg Electrical data: Power drive motor: 2.2kW Connection voltage: 400V Mains frequency: 50Hz Engine power hydraulic pump: 1.4kW Engine power coolant pump: 50W Total connection value: 3.8kW Machine data: Saw band speed(s): 15 - 100m/min Speed levels: continuously adjustable Ceb Hc I Asdc H Uks Torb Saw band length: 2925mm Saw band width: 27mm Saw band thickness: 0.9mm Cutting angle: -45 – +60° Manual operation: hydraulically via push button Semi-automatic operation: automatic Cutting areas: Cutting range 0° round (solid material): 270mm Cutting range 0° square (full material): 230mm Cutting range 0° standing rectangular (solid material): 230 x 350mm Cutting range -45° round (solid material): 230mm Cutting range -45° square (full material): 170mm Cutting range -45° standing (solid material): 140 x 200mm Cutting range +45° round (solid material): 230mm Cutting range +45° square (full material): 200mm Cutting range +45° standing rectangular (solid material): 210 x 220mm Cutting range +60° round (solid material): 140mm Cutting range +60° square (full material):140mm Cutting range +60° standing (solid material): 140 x 220mm

Condition: new, The compact horizontal band saw with one-piece saw frame made of gray cast iron is suitable for miter cuts and is a handy solution for every workshop. Creb Hceu Abugs I A Teb

Condition: good (used), Used hydraulic band saw FMB Major +VHZ Blade dimensions: 3180x27x0.9mm Blade cutting speed: 20-100m/min Csb Hc Iowaauue A Tjrb Cutting angle up to 60° Cutting capacity at 0° - round: 240mm - rectangle: 300x220mm

Condition: used, Year of construction: 2022, Technical details: Crsbeu Nig Rs Hc I A Tob cutting diameter: 128 mm saw band length: 1640 x 13 mm saw band width: 0,64 mm cutting range 90 degrees: round: 128 mm cutting range 90 degrees: flat: 100 x 150 mm cutting range 45 degrees: round: 90 mm cutting range 45 degrees: square: 90 x 75 mm band speed: 24 - 35 - 55 m/min electrical connection: 220 V / Hz. total power requirement: 500 Watt machine weight approx.: 80 kg dimension machine xH: 0,95 x 0,52 x 1,1 m The machine is unused-new, in the original box. The band saw can be moved manually. Application for steel, cast iron and non-ferrous metals. Workpiece clamping by means of clamping jaws by hand wheel, 1x fixed and once movable, clamping range 165mm, swivel range 60°. limit stop for length adjustment max. 85mm i.D. *

Condition: used, Year of construction: 1996, cutting diameter 260 mm saw band length 2910 mm cutting width 0,9 mm capacity 45 degrees: round 200 mm capacity 90 degrees: square 260 x 260 mm capacity 90 degrees: flat 300 x 260 mm capacity 60 degrees: round 165 mm capacity 60 degrees: square 150 x 150 mm capacity 60 degrees: flat 160 x 120 mm cutting speed 35 / 70 m/min dimensions of saw-band 2910 x 27 x 0,9 mm height of material-table 950 mm Creb Hc Ijtqql To A Teb total power requirement 2,0 kW weight of the machine ca. 400 kg dimensions of machine L x W x H 1,70 x 0,90 x 1,67 Accessories: coolant

Condition: new, Year of construction: 2023, ! Machine offer for customers in Lithuania / Latvia / Estonia. Croboiy Rc Rj Hc I A Teb The new high-performance automatic bandsawing machines of the HBE Dynamic series, provide performance, ease of use and energy efficiency. You can rely on accurate and fast cuts in easy to difficult to cut materials, in solids, tubes and profiles. The rigid, low-vibration saw frame in cast iron construction and the linear guide system in portal design ensure the best cutting results and maximum blade service life. By the standard servo-downfeed system with BEHRINGER cutting pressure control, the HBE Dynamic series provides short idle times and a precise saw feed movement. The standard cutting pressure control prevents overloading of the saw blade and increases the lifetime significantly. It therefore offers the best conditions for a dynamic, tool gentle sawing. Available models: - HBE261A - HBE321A - HBE411A - HBE511A

Condition: new, MEP SHARK 282 SXI evo [Semi-automatic] All MEP models on request ! Motor power 1,5/1,8 kW Bank opening 285 mm belt dimensions 2950x27x0,9 mm Weight 485 Kg Speed 36/72 m/min. cutting surface 0° 250 / 220x220 / 280x220 cutting surface 45° right 230 / 200x200 / 220x200 Cutting area 45° left 200 / 170x170 / 200x140 Cutting area 60° right 120 / 80x80 / 140x80 Cutting area 60° left Description Electro-hydraulic semi-automatic band saw SHARK 282 SXI EVO with semi-automatic-dynamic manual function, has MEP-28 control for miter cuts from 45° right to 60° left. Semi-automatic function: At cycle start occurs: - Vise closes and motor starts - Saw head lowers for cut - Motor shuts off - Saw head raises - Vise opens. Semi-automatic dynamic system (manual lowering of the saw band to the desired position and cycle start via the manual button). Some features: New centralized control panel on articulated arm to allow the operator to easily switch from any working position. Control panel with low voltage: Membrane keypad in polyester with thermoformed highlighted Push buttons and actuation control signal. Display to show: * Diagnostics (messages in user language). * Alarms (description of alarm causes) * Status of inputs and outputs * Counting of the cuts * Time used for the performed cut * Current consumption of the saw band motor Creb Hcjcgbq Ie I A Teb * Saw band tension * Saw band speed * Numerical display of the head position. Switch handle IP55 of the manual 24 V cycle. Complete program of all special cutting cycles. Identification of other possible special cutting cycles for particular applications. New hydraulic control unit of the latest generation, highly efficient and with low energy consumption. Large work surface with turntable mounted on roller bearings, of 265 mm with preloaded thrust bearing. Double speed of the belt (36/72 m/min.) with control. Provided for the inclusion of an electronic inverter for the continuous regulation of the band speed from 20 to 90 m/min. Stroke of the saw bow programmable directly from the control panel, for adaptation to the material to be cut. Clamping device laterally movable to the left and right, with quick-action vice. Manually operated band tension control with display on the screen by means of electronic converter. Base frame with extendable coolant tray. Electric coolant pump for cooling and lubrication of the saw band. Preparation for the installation of the minimum lubrication kit of the saw band (optional), in addition to the conventional standard lubrication with emulsion oil. Chip clearing brush. The machine is designed for lift truck transport. Length stop for cuts of the same length material support arm with roller, for fixing the loading platform Bimetal saw band for solid and profiled material. Tools and instructions for use in the user's language. For further technical data, please refer to the attached PDF document.

Condition: ready for operation (used), Year of construction: 1990, cutting diameter 300 mm saw band length 3900 mm total power requirement 3 kW Cjb Hc I Ajv Snq No Tsrb weight of the machine ca. 0,3 t

Condition: new, cutting diameter 250 mm capacity 90 degrees: flat 280 x 220 mm capacity 90 degrees: square 220 x 220 mm capacity 45 degrees: flat 220 x 200 mm capacity 45 degrees: round 230 mm capacity 45 degrees: square 200 x 200 mm capacity 60 degrees: flat 140 x 100 mm capacity 60 degrees: square 100 x 100 mm capacity 60 degrees: round 150 mm vice 285 mm turning speed range: 36/72 m/min dimensions of saw-band 2950x27x0,9 mm total power requirement 1,5 / 1,8 kW weight of the machine ca. 460 kg dimensions of the machine ca. 1150 x 1970 mm Equipment: - robust electro-hydraulic semi-automatic band saw machine (INDUSTRY) - with miter cuts from 45° right to 60° left * Miter adjustment via large turntable - MEP microprocessor control EVO to control all functions * front right, rotatable - optional manual or automatic lowering of the saw bow * stepless adjustment of the saw bow lowering - saw band guide made of hard metal plates - hydraulic saw band tension - including digital value display - 2x saw band speeds - 1x BI-metal saw band - coolant device - 1x angle stop - chip removal brush - machine base frame with forklift pockets - operating instructions in German Functioning of semi-automatic operation: - electro-hydraulic clamping of the vice Crjb Hc Ievixxxs A Tob - electro-hydraulic lowering of the saw bow - electro-hydraulic raising of the saw bow - electro-hydraulic opening of the vice

Condition: used, Technical details: cutting diameter: 280 mm Cutting height: 280 mm cutting width: 400 mm robust and accurate automatic band saw miter cut possible incl. roller conveyor with access approx. 6000mm and exit 3700mm Crob Hsu Nih Isc I A Tjb *

Condition: new, Year of construction: 2025, cutting capacity: 280 mm, cutting width (max.): 350 mm, warranty duration: 12 months, - Swarf Brush - Hydraulic Vice - Hydraulic Blade Tension - Blade Breakage Detection - Stop System / Blade Breakage Switch - Stop System - 2 Pieces 60 cm Roller Table - Movable Control Panel - Lighting Lamp / Led Lighting TECHNICAL SPECIFICATIONS TECHNICAL SPECIFICATIONS KMY 2DG 280 Capacity +90° (mm) Capacity +90° (mm) Round Round Ø 280 Square Square 280 X 280 Rectangle Rectangle 280 X 350 Capacity +60° (mm) Capacity +60° (mm) Capacity -60° (mm) Capacity -60° (mm) Round Round Ø 280 Square Square 270X270 Rectangle Rectangle 180 X 330 Capacity +45° (mm) Capacity +45° (mm) Round Round Ø 240 Square Square 210 X 210 Rectangle Rectangle 170 X 240 Capacity -45° (mm) Capacity -45° (mm) Round Round Ø 200 Square Square 160 X 160 Rectangle Rectangle 160 X 260 Capacity +30° (mm) Capacity -60° (mm) Round Round Ø 140 Square Square 120 X 120 Rectangle Rectangle 60 X 160 Capacity -30° (mm) Capacity -90° (mm) Round Round - Square Square - Rectangle Rectangle - Crob Hjvvg Egjc I A Teb Main Motor 1.5 kW /300 Nm Hydraulic Motor Hydraulic Motor 0.18 kW Coolant Motor Coolant Motor 0.12 kW Band Saw Blade Size 3660 X 27 X 0.9 mm Material Feeding Height 790 mm Vice Maximum Opening Vice Maximum Opening 350 mm Vice Maximum Closing Vice Maximum Closing Zero Zero Vice Height Vice Height 160 mm Table Width Rolled Table Width 370 mm Height-Width-Length Height-Width-Length 1400 X 1350 X 2300 mm Weight Weight 900 kg

Condition: excellent (used), Year of construction: 2014, Available from stock! Semi-automatic band saw with miter adjustment on both sides • Fast miter adjustment from 90° to 30°, continuously adjustable to 0.5° accuracy according to the scale. The miter pivot point is the intersection point between the saw blade and the material feed system, thus ensuring no change in the length. • End stops at 30° + 45° left • Quick material clamping: The material is clamped parallel at 90° at any angle of the saw frame. • Machine stand with chip collection tray • Saw blade drive with limit switch and automatic frame lifting to the top of the material. • Precise carbide-tipped saw blade roller guide. • Miter range continuously adjustable from 30° to 150°. • Coolant system supplied as standard (including electric preparation for minimum quantity spray system). Crsbov Rbtno Hc I A Tob Additional equipment DG-HS: Hydraulic raising/lowering of the saw frame. Semi-automatic sawing process. Hydraulic material clamping/short-stroke cylinder. Rapid traverse lowering to the top of the material. Cutting range: 30° left Ø 130 or 120x120 45° left Ø 200 or 180x180 90° Ø 260 or 300x260 45° right Ø 200 or 180x180 30° right Ø 130 or 120x120 Remnant length 25mm Smallest diameter 5mm Motor 1.0 / 1.5 kW Saw blade 3350x27x0.9mm Cutting speed 28/56 m/min

Condition: new, METALLKRAFT BMBS 300x320 HA-DG Semi Automatic Swing Frame Metal Band Saw Picture shows optional equipment Semi-automatic swing frame metal band saw for miter cuts from +60° to -45° with frequency converter For sawing hollow sections and solid materials made of steel, stainless steel, tool steel, non-ferrous metals and plastics Sawing functions hydraulically controlled Crjb Hc Iofdgi Ho A Tjb Saw blade drive with low-maintenance, oil-lubricated worm gearbox With robust three-phase motor with overload protection Bearing mounted rotary table After starting the cutting cycle, the vice clamps automatically - after the process is finished, the vice returns to the starting position (HA-DG) Saw arm inclined by 25°, thus longer service life of the saw band Swiveling saw arm from +60° to -45 With chip clearing brush for optimal cleaning and maintenance of the saw band With frequency converter: allows infinitely variable adjustment of the saw band speed from 20 - 100 m/min. BRP - saw band monitoring Hydraulic vice with manual quick clamp for lateral adjustment Limit switches control the upper and lower position of the saw arm No adjustment of the upper end point necessary Cut detection function with integrated pushbutton HM saw band guides Swiveling control panel Scope of delivery: Saw band Operating tool Length stop 1 meter Coolant pump Technical data: Length (product) approx. 2050mm width/depth (product) approx. 1170mm Height (product) approx. 2040mm Weight (net) approx. 650kg Power drive motor: 2,4kW Supply voltage: 400V Mains frequency: 50Hz Saw band speed(s): 20 - 100m/min Speed steps: infinitely variable saw band length: 3660mm saw band width: 27mm saw band thickness: 0,9mm Cutting range 0° round (tube): 300mm Cutting range 0° round (solid material): 300mm Cutting range 0° rectangular lying (hollow profile): 320 x 290mm Cutting range 0° bundle (tube): 320 x 160mm Cutting range -45° round (tube): 300mm Cutting range -45° round (solid material): 300mm Cutting range -45° rectangular lying (hollow section): 300 x 280mm Cutting range -60° round (tube): 200mm cutting range -60° round (solid material): 200mm Cutting range -60° rectangular lying (hollow profile): 190 x 200mm Cutting range +45° round (tube): 270mm Cutting range +45° round (solid material): 270mm Cutting range +45° rectangular lying (hollow profile): 270 x 200mm Table height material feed: 800mm

Condition: reconditioned (used), Year of construction: 1998, MEP SHARK 260 band saw, built in 1998, workshop overhauled in February 2025, Cob Hc I Aov Nvt To Tsrb 3000mm sliding stop, mounted on the right side Roller conveyor, left side

Condition: new, cutting diameter 250 mm capacity 90 degrees: flat 280 x 220 mm capacity 90 degrees: square 220 x 220 mm capacity 45 degrees: flat 220 x 200 mm capacity 45 degrees: round 230 mm capacity 45 degrees: square 200 x 200 mm capacity 60 degrees: flat 140 x 100 mm capacity 60 degrees: square 100 x 100 mm capacity 60 degrees: round 150 mm vice 285 mm turning speed range: 36/72 m/min dimensions of saw-band 2950 x 27 x 0,9 mm total power requirement 1,5 / 1,8 kW weight of the machine ca. 460 kg dimensions of the machine ca. 1150 x 1970 mm Equipment: - robust electro-hydraulic semi-automatic band saw (INDUSTRY) - with miter cuts from 45° right to 60° left * Miter adjustment via large turntable Cjb Hc I Asvixkuj Tsrb - MEP microprocessor control EVO to control all functions * front right, rotatable - optional manual or automatic lowering of the saw bow * stepless adjustment of the saw bow lowering - saw band guide made of hard metal plates - hydraulic saw band tension - including digital value display - 2x saw band speeds - 1x BI-metal saw band - 1x angle stop - chip removal brush - machine base frame with forklift pockets - operating instructions in German Functioning of semi-automatic operation: - electro-hydraulic clamping of the vice - electro-hydraulic lowering of the saw bow - electro-hydraulic raising of the saw bow - electro-hydraulic opening of the vice SPECIAL ACCESSORIES INCLUDED: - MEP LubeCut micro dosing device

Condition: used, Year of construction: 1991, Technical details: cutting diameter: 240 mm saw band length: 3000 mm saw band width: 20 x 0,8 mm cutting range 90 degrees: round: 240 mm band speed: 20; 35; 50; 70 m/min total power requirement: 1,8 kW machine weight approx.: 330 kg dimension machine xH: 1,9 x 1,1 x 1,1 m hydraulic operation clamping jaw size 150 x 100mm, manual clamping (hand wheel) 1 transport roller each before and after vice support incl. 4 pieces band saw blades incl. 2 pieces roller tables (2000 x 520 x 750mm and 1000 x 520 x 750mm) incl. limit 3000mm Crsbou Nihuo Hc I A Tsb *

Condition: new, Used MACC 320 MS Semi-automatic sawing machine Good New " CE " Data sheet attached. Ceb Hcsfibfao I A Terb Ready for delivery unless sold The basic characteristics of the machine (stiffness of the blade support, flywheel sizing, belt guides, belt tensioning) have been carefully studied to avoid the belt yielding, increase the duration, improve the linearity and the cutting time. Vertical rotation on pivot with adjustable conical bearings without backlash. Belt drive with two-speed motor and special reducer with bronze gear and hardened and ground worm screw. Appropriately sized flywheels. Sturdy belt guides with watertight bearings and adjustable widia plates. Tensioning of the band obtained by means of an electromechanical device with blade rotation microswitch control. Accident prevention safety device on the flywheel cover, on the control knob and on the blade. Cutting thickness 1,2 mm Cutting range from 0 to 60° right Adjustable stop for cuts of the same size 0.06 kW electric pump for belt cooling Operation: start of the cutting cycle by start button, the machine: 1. closes the vice and drives the band motor 2. lowers the arc for cutting 3. the bow returns to the starting position 4. stops the band motor 5. opens the vice Possibility of manual cutting ACCESSORIES ON REQUEST : SINGLE-PHASE motor 69 m/1′ Speed variator from

Condition: new, PILOUS double miter band saw ARG 260 plus H with automatic hydraulic lifting of the saw frame Incl. special accessories: driven chip brush, Belt tension indicator Roller conveyor D 300 / 3m incl. manual measuring system Roller conveyor D 300 / 3m Cutting range: Round:90° -45° +45° +60° in mm:260-175-200-125 Square:90°-45°+45° +60° in mm:255-145-185-120 Rectangle:90°-45°+45° +60° in mm.300 x 200-190 x 100-185 x 200-125 x 120 Main motor 400 V, 50 Hz, 1.4 kW Pump motor 400 V, 50 Hz, 0.05 kW Motor from hydraulic unit 400 V, 50 Hz, 0.18 kW Saw blade speed 35/70 m/min. saw blade length 2880 x 27 x 0,9 mm working height from vice 910 mm Oil in hydraulic system approx. 6 l (ISO 6743/4-HM, DIN 51 524 part 2-HLP) Coolant tank approx. 15 l Machine dimensions (min.) 950 x 1650 x 1450 mm Machine dimensions (max.) 1550 x 1850 x 2050 mm Machine weight 490 kg Cebeilqbus Hc I A Tsrb

Condition: new, PILOUS double miter band saw ARG 300 plus H.F. Crjbeh S Ikko Hc I A Tob with automatic hydraulic lifting of the saw frame Incl. special accessories: driven chip brush, belt tension indicator Roller conveyor D 400 / 3m incl. digital measuring system Roller conveyor D 400 / 3m Round: 90°300mm, -45°220mm,+45°240mm,+60°155mm Square: 90°290mm, -45°195mm,+45°225mm,+60°150mm Rectangle: 90°375 x 190mm, -45°240 x 100mm, +45°240 x 160mm, +60°150 x 150mm Main motor:400 V, 50 Hz, 2,2 kW Pump motor:400 V, 50 Hz, 0,05 kW Hydraulic power unit motor:400 V, 50 Hz, 0,18 kW Saw blade speed:15-90 m/min. Stepless Saw blade length:3150 x 27 x 0,9 mm Working height from vice: 910 mm Coolant tank: approx. 15 l Machine dimensions (min.) 950 x 1750 x 1600 mm machine dimensions (max.)1700 x 2000 x 2150 mm Machine weight: 645 kg