Weinig Profimat four-sided planer

WEINIG Profimat 23

Condition: excellent (used), Year of construction: 1995, Weinig Profimat 23E four side planer Ksdeibq Niepfx Ah Nsdg - German production - year of production 1995 - right and left spindles with a face milling cutter ensuring parallelism and a right angle of 900 - element width measurement - electronic width adjustment TECHNICAL PARAMETERS: planing width 230 mm planing height 120 mm electronic planing width control 1 lower spindle 4 kW 2 right spindle 4 kW 3 left spindle 4.2 kW (face milling) 4 spindle right 4.2 kW (face milling) 5 upper spindle 7.5 kW element width measurement electric height adjustment of the feed rollers electric height adjustment of the upper spindle spindle diameter 40 mm six top steel rollers yen top roller, rubber one roll in the table top pulling pneumatic pressure feed on cardan shafts pre-table length 2470 mm diameter of nozzles 140 mm Machine dimensions 456x240x220 weight 4000 kg

Condition: excellent (used), functionality: fully functional, BRIQUETTING machine , HYDRAULIC , AUTOMATIC , model POR STANDARD second hand machine working conditions : Excellent briquette cutter system CE mark : Yes briquett diameter mm. 65 briquett length mm.50 / 300 production from 60 kg. to 90 kg./hour Kedpsw E Iyijfx Ah Njdg motor power Hp 7,5 net weigth kg. 800 overall dimensions cm.195 x 110 H=cm.150 volt. 380/50

Condition: used, Planer and rabbeting machine Weinig Profimat 23 for four-sided planning and profiling of timber as construction timber, in excellent original condition and including planer heads (2 x 270 mm // 2 x 170 mm) spindle: 5 spindle 1: Bottom / 7.5 kW / 40 mm spindle 2: Right / 11 kW / 40 mm Kedsx Ttbnjpfx Ah Nedg spindle 3: Left / common motor with right / 40 mm spindle 4: Top / 11 kW / 40 mm spindle 5: Bottom / 4 kW / 40 mm working width: 260 mm working height: 160 mm feed: 4 kW

Condition: used, Planer and edge finishing machine Weinig Profimat 23 E for four-sided planing and profiling of wood with movable spindle. spindle: 5 spindle 1: Bottom / 5.5 kW / 40 mm Kjdpfsx Ecguox Ah Nsdg spindle 2: Right / 5.5 kW / 40 mm spindle 3: Left / shared motor with #2 / 40 mm spindle 4: Top / 7.5kW / 40 mm spindle 5: Bottom / 4 kW / 40 mm working width: 230 mm working height: 120 mm

Condition: excellent (used), Year of construction: 2012, Set for finger jointing in medium and mass production. The machine is technically efficient and in good condition. Several sets of tools are included. Characteristic: – industrial set with one tenoning machine. Loading the package under the supervision of the operator enables the processing of inferior raw material, – sensitivity controlled by microprocessors /automatic control/, – turning the package after 1 treatment on the turntable (sharp connection) or turning the package on the back (furniture joint with a line; unique GOMA solution), – the set includes an automatic station for loading the press, – the possibility of using cuts on the press, Tenoner with feed table Data Values Milling spindle fi 50x210 mm Spindle speed 6000 rpm 18.5 kW motor Tool dimensions fi 250x160 mm The saw spindle aligns the face Special chipper fi 300x8 mm 6 kW / 3000 rpm motor Stepless feed table Working width x working height 600 x 30-160 mm Glue nozzle outline by tool PRESS FC-10 PZ6/2 Data Values Board width 30-160 mm Jufefe Board thickness 20-70 mm The length of the finished board is 6000 mm Pressing force 3 - 7.5 - 10 T Hydraulic power pack 3 kW / 140 bar Kodpfslu D Tfjx Ah Nsdg

Condition: used, Planing and moulding machine Weinig Profimat 23 for four-sided planing and profiling with universal spindle for pre-planed wood or other angled (planed) workpieces such as MDF or plastic parts. The planing spindle can be retrofitted if required. Spindles: 5 Spindle 1: Right (7.5 kW) Spindle 2: Left (motor together with spindle 1) Spindle 3: Top (7.5 kW) Spindle 4: Bottom (5.5 kW) Spindle 5: Uni (5.5 kW) Working width: 170 mm Working height: 120 mm Spindle diameter: 35 mm Feed: 2.2 kW // 5-24 m/min. spindles: 5 spindle 1: Right (5.5 kW) Dressing table length: 2.000 mm spindle 3: Above (4kW) spindle 2: Right / 7.5 kW / 40 mm spindle 4: Bottom (4kW) spindle 5: Uni (4 kW) working width: 230 mm working height: 120 mm feed: 5 - 22 m/min Kdodpfxsxu H R Ae Ah Nsg control: ATS system table rollers: Driven table roller in the outlet

Condition: used, Planing and moulding machine Weinig Profimat 23 for four-sided planing and profiling with ATS system. spindles: 6 spindle 1: Below spindle 2: Right spindle 3: Left spindle 4: Right spindle 5: Upstairs Kedew I A Sqepfx Ah Nedg spindle 6: Below working width: 230 mm working height: 120 mm Dressing table length: 2.000 mm Planer table length: 2.000 mm control: ATS Control: ATS delivery time: On demand sample picture: Illustration similar

Condition: new, power: 18 kW (24.47 HP), gearing type: mechanical, fuel type: diesel, color: blue, overall weight: 1,810 kg, total length: 2,895 mm, empty load weight: 1,300 kg, maximum load weight: 510 kg, suspension: other, number of seats: 1, Equipment: all wheel drive, differential lock, Power steering, diesel, all-wheel drive, 18.2 kW, 1,319 cm³, hydrostatic transmission, 3-cylinder, 20 km/h, differential lock, power steering, 1 seat, analog fuel gauge, rear swiveling work lights, 2 front weights at 15 kg each, roll bar with beacon, cross-ply tires front: 6.0-12, rear 8.30-20, overall length 2,895 mm, weight 1,300 kg, permissible total weight 1,810 kg. Turf tires available for an extra charge of €500.00 net. FOR US, CONDITION AND FEELING ARE DECISIVE; PRICE IS SECONDARY. For further questions, please contact Mr. Faller by phone. EXCHANGE, TRADE-IN, OR FINANCING OF YOUR VEHICLE POSSIBLE. All details provided without guarantee. For more offers, visit our homepage. The description and data provided do not constitute a warranty and are not binding. The only binding agreement is the purchase contract signed at our dealership. Subject to errors and prior sale! Kdedpfowtpvzsx Ah Nsg

Condition: excellent (used), Weinig Profimat 23 Fortec four-sided planer Working width 230mm Working height 140mm Number of spindles 6 Arrangement of spindles Bottom 7.5kw Right Left 11kw Top 7.5kw Ksdpfxoumxqro Ah Nedg Top 5.5kw Bottom 5.5kw Pneumatic pressures Feed speed adjustable on variator Drive on cardan shafts CE certificate

Condition: excellent (used), Year of construction: 1994, working width 230mm working heigth 120mm 5 heads heads set bottom/right/left/top/bottom spindles diameter 40mm two axes heads regulation variable regulated feeder Kdsdpfx Ahepgu R Ao Njg spindles speed 6000 RPM year 1994

Condition: used, Number of spindles 6 St. Working width 230 mm Working height 120 mm Length of the planing table 2500 mm Feed motor 3 kW Feed speed 5-24 m/min. total power requirement 27 kw Dimensions (L/W/H) 3900 x 2200 x 2000 mm weight of the machine ca. 2500 kg Weinig four-side planer Profimat 23 window version with glazing bead removal, ATS control and program control ----- Machine will be renovated and functionally checked! Technical data summary (please inquire about any additional accessories included) ----- Generally ----- > Working width: 230 mm > Working height: 120 mm > Number of spindles: 6 pieces. > Dressing table length: 2500 mm > Feed speed: 5-24 m/min > Total power requirement: 27 kW > Dimensions: 3900 x 2200 x 2000 mm > Machine weight, approx.: 2500 kg Spindle arrangement ----- > Spindle 1: bottom > Spindle 2: right, pneumatically clocked up-down > Spindle 3: left > Spindle 4: top > Spindle 5: bottom > Spindle 6: Glass bead saw pneumatically up and down Spindle description ----- > Spindle 1: 4 kW, 6000 rpm, 40 mm diameter > Spindle 2: 7.5 kW, 6000 rpm, 40 mm diameter > Spindle 3: 6000 rpm, 40 mm diameter > Spindle 4: 5.5 kW, 6000 rpm, 40 mm diameter > Spindle 5: 4 kW, 6000 rpm, 40 mm diameter Kdsdpou Su Huofx Ah Nsg > Spindle 6: Glass bead saw 2.2 kW, 6000 rpm, 40 mm diameter Other features ----- > Glazing bead removal > ATS control, automatic 2-axis positioning for width and height (left and upper spindle) with program memory 99 programs > Machine operation: window package Joint control of the right spindle and the glazing bead removal via manual selector switch in the control panel > Spindles with mechanical digital display Option: used planer heads (technical data according to the manufacturer - no guarantee!)

Condition: ready for operation (used), functionality: fully functional, working width: 260 mm, planing height: 170 mm, spindle diameter: 40 mm, planing width: 260 mm, working height: 170 mm, power of feed motor: 4,000 W, spindle speed (max.): 6,000 rpm, spindle speed (min.): 6,000 rpm, height adjustment type: electric, number of spindles: 5, input frequency: 50 Hz, Equipment: cabin, motor brake, Weinig Profimat 23 E Working width: 260 mm, working height: 170 mm, 5 spindles, spindle diameter: 40 mm, Spindle arrangement: 1- Bottom - 5.5 kW 2- Right + 3- Left - 11 kW 4- Top - 5.5 kW 5- Bottom - 11 kW Feed rate: 6 - 24 m/min - 4 kW Kdodpfxovgnb Ro Ah Neg Air cushion in the table One driven roller in the table at the exit. With tool.

Condition: excellent (used), Year of construction: 1995, Planer - Moulder Manufacturer: Weinig Type: Profimat 23 Year of manufacture: 1995 Working width: 230 mm Working height: 120 mm Planing table length: 2,000 mm Speeds: 6,000 rpm Spindle diameter: 40 mm Feed speed: 4 - 24 m/min Number of shafts: 6 Grooving saw: Yes Kjdpfxsv Id Ngs Ah Njdg Arrangement: U-R-L-R-O-U-grooving saw 1st shaft, bottom, 7.5 kW 2/3rd Shaft, right, left, 7.5 kW 4th shaft right, 7.5 kW 5th shaft top, 7.5 kW 6th shaft, bottom, 4.6 kW Groove saw: 2.2 kW Dimensions: approx. 4,500 - 2,000 - 1,800 mm Weight: approx. 3.5 tons

Condition: excellent (used), Year of construction: 2006, functionality: fully functional, Fully working UniControl 12 year 2006 from Norway - for exact technical specification please open attached document in PDF below. Cross section UniTec 12: - saw unit - edge round cutter from bottom - Hubspindel no.1 - Hubspindel no.2 - Hubspindel no.3 Long , profile section UniVar 12: - Profil cutter - Profil cutter - Profil cutter horizontal - Profil cutter - Profil cutter Kdodpomgc I Nefx Ah Nsg - Profil cutter Total el power 114 kw 400 V AC Need for suction 270 m3/min Need of compressed air 1000 L/ minMachine was in use until 15.08.2023 Payment: Prior to loading Delivery: ex. factory Rendalen - Norway Machine is located in Norway ( near to Trondheim) The machine is now disconnected, stored in dry and warm wearhouse, and are ready to be shipped. Rekman Maskin & Service - service of woodworking machines since 1986.

Condition: used, Number of spindles 6 St. Working width 230 mm Working height 120 mm Length of the planing table 2500 mm Feed motor 3 kW Feed speed 5-24 m/min. total power requirement 27 kw Dimensions (L/W/H) 3900 x 2200 x 2000 mm weight of the machine ca. 2500 kg Weinig Profimat 23 four-side planer, window version with glazing bead removal or can be used as a grooving spindle ATS control and program control ----- Machine was factory overhauled by Weinig in 2024. Technical Specifications Summary (Please inquire about any additional accessories included) ----- General ----- > Working width: 230 mm > Working height: 120 mm > Number of spindles: 6 > Planer table length: 2500 mm > Feed motor: 3 kW > Feed speed: 5-24 m/min > Total power requirement: 27 kW > Dimensions: 3900 x 2200 x 2000 mm > Machine weight, approx.: 2500 kg Spindle arrangement Kodpfx Aexpn T Ush Nodg ----- > Spindle 1: bottom > Spindle 2: right, pneumatically timed up-down > Spindle 3: left > Spindle 4: top > Spindle 5: bottom > Spindle 6: pneumatically timed up-down glazing bead saw Spindle Description ----- > Spindle 1: 4 kW, 6000 rpm, 40 mm diameter > Spindle 2: 7.5 kW, 6000 rpm, 40 mm diameter > Spindle 3: 6000 rpm, 40 mm diameter > Spindle 4: 5.5 kW, 6000 rpm, 40 mm diameter > Spindle 5: 4 kW, 6000 rpm, 40 mm diameter > Spindle 6: glazing bead saw 2.2 kW, 6000 rpm, 40 mm diameter Additional Features ----- > Can be used for glazing bead cutting or as a grooving machine > ATS control, automatic 2-axis positioning for width and height (left and upper spindle) with 99-program memory > Machine operation: Window package Joint control of the right spindle and the glazing bead feed via manual selector switch on the control panel > Spindles with mechanical digital display (Technical data according to the manufacturer - no guarantee!)