Condition: new, Year of construction: 2025, Ideal for shredding straw, polystyrene, leaves, hay, and bread. Throughput is highly dependent on the screen and the input material: - Up to a maximum of 350 kg/h for straw with a 15 mm screen - Up to 60 kg/h for EPS with a 15 mm screen Motor: 11 kW - 400 Volt (9.2 kW or 15 kW also possible upon request) Optional: *Additional cost for the next larger machine with 18.5 kW and a larger silo diameter: + €2,750 net Sturdy steel construction, hardened cutting blades, screen with interchangeable inserts, optional hole sizes: (10), 15, 22, 26, 30, 40, or 60 mm For electric drive with star-delta starter, overload protection, and 8 m power cord, ready for connection, discharge nozzle 150 mm, optional for plastic or grain pipes, blowing distance approx. 12 m, chassis with 2 running wheels Ø 380 mm, and one pivoting support wheel Ø 125 mm, all wheels with solid rubber tires, dimensions approx. 1200 x 900 x 1270/1400 mm (l x w x h) Weight approx. 240 kg, Spare parts prices and options: 24 blades, hardened, €9.90 each (net) 6 bolts, €14.90 each (net) 1 screen, €475 each (net) Klodpfx Aszbizofget Cover, €290 each (net) Polystyrene disc: €600 each (net)

Condition: new, Year of construction: 2025, power: 40 kW (54.38 HP), motor manufacturer: New Holland, gearing type: mechanical, fuel type: diesel, = Additional options and accessories = - PTO = Remarks = Country of origin: India Displacement: 2,931cc Torque: 203 @ 1400 Nm @ rpm Dimension: 3,500 x 1,920 x 2,200 axle configuration: 2WD No. of cylinders / aspiration: 3 / naturally Capacity (cm³): 2931 Bore x stroke (mm): 104x115 Power @rated speed (2300 rpm) - ECE R120 (kW/hp): 40.25 / 54.0 Max. torque (gross) (Nm@rpm): 203 @ 1400 Torque rise (%) 25 Transmission - 30 kph 8F+2R constant mesh & sliding mesh (optionally synchronised on 3th & 4th gear) with epicyclical reduction for low - high range selection Speed range (kph) 2.97-29.74 Optional with creeper (F+R) 12+3 Min. speed with creeper (kph) 0.96 Optional without creeper (F+R) 12+3 Speed range (kph) 2.0-29.74 Flexion Bar lower link draft sensing Standard Rear linkage category Cat. II Mechanical lift with Lift-O-Matic™ Standard Position draft mixed and float controls Standard Main pump flow - Standard (lpm) 45 Steering pump flow (lpm) 28 Max. number of remote valves 2 Linkage Maximum lift capacity at ball ends with no assist arms (kg) 1400 Maximum lift capacity at ball ends with assist arms (kg) 1850 Engine speed at 540 rpm (rpm) 1967 Kljdpoy Tyg Dsfx Afgjt PTO activation mechanical Turn angle 2WD/4WD (°) 52/38 Min. turn radius w/brakes 2WD/4WD (mm) 3205/4200 Dimensions Overall length 2WD/4WD (mm) including FWC 3500 Overall width 2WD/4WD (mm) 1920 Height to top of exhaust 2WD/4WD (mm) 2200/2200 Wheelbase 2WD/4WD 2050/2005 Track width Front 2WD (mm) 1410-1710 Track width Front 4WD (mm) 1445-1875 Track width Rear Min. / Max. (all axle types) (mm) 1570-2100 Ground clearance under rear axle (2WD/4WD) (mm) 455/434 Weights Minimum weight 2WD/4WD (kg) (With ROPS & FWC 55Kg) 2200/2400 = More information = Drive: Wheel Number of cylinders: 3 GVW: 2.200 kg Wheelbase: 205 cm Engine type: New Holland S8000 Emission class: Euro 2

Condition: new, Year of construction: 2025, power: 40 kW (54.38 HP), motor manufacturer: New Holland, gearing type: mechanical, fuel type: diesel, maximum speed: 30 km/h, total height: 2,200 mm, total length: 3,500 mm, total width: 1,920 mm, = Additional options and accessories = - PTO = Remarks = Country of origin: India Displacement: 2,931cc Torque: 203 Nm @ 1400 rpm Kljdpfx Asy Tyg Refgst Dimension: 3,500 x 1,920 x 2,200 No. of cylinders / aspiration: 3 / naturally Capacity (cm³): 2931 Bore x stroke (mm): 104x115 Power @rated speed (2300 rpm) - ECE R120 (kW/hp): 40.25 / 54.0 Max. torque (gross) (Nm@rpm): 203 @ 1400 Torque rise (%) 25 Transmission - 30 kph 8F+2R constant mesh & sliding mesh (optionally synchronised on 3th & 4th gear) with epicyclical reduction for low - high range selection Speed range (kph) 2.97-29.74 Optional with creeper (F+R) 12+3 Min. speed with creeper (kph) 0.96 Optional without creeper (F+R) 12+3 Speed range (kph) 2.0-29.74 Flexion Bar lower link draft sensing Standard Rear linkage category Cat. II Mechanical lift with Lift-O-Matic™ Standard Position draft mixed and float controls Standard Main pump flow - Standard (lpm) 45 Steering pump flow (lpm) 28 Max. number of remote valves 2 Linkage Maximum lift capacity at ball ends with no assist arms (kg) 1400 Maximum lift capacity at ball ends with assist arms (kg) 1850 Engine speed at 540 rpm (rpm) 1967 PTO activation mechanical Turn angle 2WD/4WD (°) 52/38 Min. turn radius w/brakes 2WD/4WD (mm) 3205/4200 Dimensions Overall length 2WD/4WD (mm) including FWC 3500 Overall width 2WD/4WD (mm) 1920 Height to top of exhaust 2WD/4WD (mm) 2200/2200 Wheelbase 2WD/4WD 2050/2005 Track width Front 2WD (mm) 1410-1710 Track width Front 4WD (mm) 1445-1875 Track width Rear Min. / Max. (all axle types) (mm) 1570-2100 Ground clearance under rear axle (2WD/4WD) (mm) 455/434 Weights Minimum weight 2WD/4WD (kg) (With ROPS & FWC 55Kg) 2200/2400 = More information = Drive: Wheel Number of cylinders: 3 Engine capacity: 2.931 cc GVW: 2.400 kg Wheelbase: 205 cm Engine type: New Holland S8000 Fuel tank: 60 litres Emission class: Euro 2

Condition: good (used), Year of construction: 2016, Type of fuel: Petrol Empty weight: 765 kg Technical condition: good Visual appearance: good Serial number: SG0732 Transport dimensions (LxWxH): 1,91x0,92x1,3 Rental currency: EUR Please contact PFEIFER GROUP, Pfeifer Heavy Machinery Poland or Pfeifer Heavy Machinery United Kingdom for more information Manufacturer: Barreto Typ: 30SG Building year: 2016 Fuel: Gasoline Serial number: SG0732 Hydraulically driven cutting wheel Ø 49 cm with 16 teeth Cutting head swing: 83°, 120 cm arc Cutting head operation: Joystick Kjdpfjuckuajx Afgjlt Max. working depth: 35 cm Max. working height: 81 cm Weight: 765 kg Dimensions 191 x 92 x 130 cm (l x w x h) CE (Declaration of Conformity)

Condition: ready for operation (used), functionality: fully functional, Year of construction: 2017, gearing type: mechanical, color: red, total height: 2,750 mm, machine/vehicle number: 178-017-2183, Equipment: front power take-off, lighting, A well-maintained Kongskilde VM 20 feed mixer. Always meticulously maintained, with oil changes performed annually. The PTO shaft has been used for 1 year, and the blades have also been used for 1 year. The feed mixer has not been used for the last 3 years. Kodpfx Afoy Tuh Ajgjlt Load volume: 20 m3 / 20,000 L. Year of manufacture: 2017. Registered. Equipped with: weighing system/scale, camera, metal magnet, central grease fitting block. Height: 2750 mm.

Condition: used, functionality: fully functional, Year of construction: 2000, color: grey, overall weight: 2,980 kg, total height: 2,300 mm, total length: 5,520 mm, total width: 2,540 mm, working width: 1,700 mm, Beach cleaner: + CanicaS + Type T170 H Klsdpfx Asy Tmqpofgot + Drive for belt and rake via PTO (540 or 1000 rpm) + new belt + hitch triangle for tractor + smoother and collection container, hydraulically operated + year of manufacture: 2000 + fully galvanized + required tractor power: 60 hp + area output: 20,000 m²/hour + 552cm x 254cm x 230cm (l x w x h) + unladen weight: 1,980 kg; permissible gross weight: 2,980 kg + working width: 170cm + collection container: 1400 l + municipal equipment from a single owner Receive all newly listed vehicles by email – sign up for our NEWSLETTER! Errors and typographical errors possible, subject to prior sale!

Condition: used, Year of construction: 2023, operating hours: 2,096 h, power: 37 kW (50.31 HP), maximum speed: 20 km/h, Operating hours: 2096. Equipped with ROPS operator protection roof. Kubota diesel engine D1803-CR-T3, 37 kW = 50 hp. Rear weight end plate. High-speed gear: 20 km/h. Hydraulic tool locking. Retention system. Special equipment: Rear frame with widened fenders. Lugged weight 100 kg. Tires: 15.0/55-17 AS, 6-hole, ET -45. Gear pump, reinforced, 19 ccm (requires 37 kW engine). Work light set, LED, 800 lumens (2x front, 1x rear). Attachment frame, Euro-W. Hydraulic locking. Towing device with pin and lashing eyes. Location: Mayer eGbR. Ksdpsxmrvuefx Afgolt

Condition: used, Year of construction: 2005, gearing type: other, first registration: 01/2005, color: orange, mileage: 1,001 km, empty load weight: 1,690 kg, driver cabin: other, Vehicle location: Bovenden, Unladen weight approximately 1690 kg! Drive type: E2940HFS ACCESSORY INFORMATION PROVIDED WITHOUT GUARANTEE, subject to change, prior sale and errors! Kledpfx Afoy Tbg Ssgjt

Condition: used, Applicable material: Hay Kledpfoy Ta Axox Afgjt Working width: 730 cm

Condition: used, color: orange, = Additional options and accessories = - Spare wheel Kledpfx Afsy S T A Njget

Year of construction: 2020, condition: new, PLC microprocessor control • HMI operator panel • Phases changed manually or automatically - temporarily • Two separate circuits for water and chemistry, closed circuit • Intelligent control - in the event of a power cut / sudden shutdown, no mixing of liquids possible The control box is made of IP54 technology User manual, Declaration of conformity, 12 months warranty. ROMER pressure washers use metal sheet that provides protection against chemicals. The washer walls protect against splashing, thanks to the closed chemistry loop, the process can be carried out with small amounts of chemistry. Due to the small amount of refrigerant required, it is easy to heat and cheaper to buy, it also allows you to wash large dimensions impossible to wash in bath tubs. Filtration system Thanks to the filtration system, the chemistry works in a closed circuit, 3 filters of different thickness are used, which prevent garbage and grease from entering the circulation. The chemistry is stored in heated stainless steel tanks from where it is fed by a pump under pressure to the lance Washing of dimensions The pressure washer allows washing of large elements, optionally has a rotating platform that allows rotation of the cleaned element, elements can be applied to it with a forklift or crane. High pressure pumps The car wash has two preparation phases, both treatments have separate sets of pipes, pumps, wires and guns to minimize mixing of these agents during phase change. Drains have separate valves that manage the return of funds. The carwash is equipped with a logic controller that controls all components. The chemistry is pumped up to 20 bar using a very durable, acid-resistant AISI304 pump with several stages, 3 kW. The rinsing phase uses a high pressure piston pump with ceramic pistons with a capacity of 3kW and provides 160 - 200 bar. Ksdpfxjfz Dvcs Afgjlt

Condition: used, gearing type: other, fuel type: diesel, mileage: 1,001 km, driver cabin: other, Vehicle location: Bovenden, Body: Hydraulic pump USED No.: 2737J4457 ACCESSORY INFORMATION WITHOUT WARRANTY, subject to alterations, prior sale and errors excepted! - . Kedei Rpcijpfx Afgjlt

Condition: used, gearing type: other, fuel type: diesel, mileage: 1,001 km, driver cabin: other, Vehicle location: Bovenden, Body: Hydraulic pump USED No.: 2J7366 ACCESSORY INFORMATION WITHOUT WARRANTY, subject to alterations, prior sale and errors excepted! Kodpfxji Rpcbj Afgelt - .

Condition: new, gearing type: other, fuel type: diesel, driver cabin: other, Vehicle location: Bovenden, Body: Hydraulic pump NEW No.: 8748J8747 ACCESSORY INFORMATION WITHOUT WARRANTY, subject to alterations, prior sale and errors excepted! - . Kledpfx Afei Rn Umogjt

Condition: new, gearing type: other, fuel type: diesel, driver cabin: other, Vehicle location: Bovenden, Body: Hydraulic pump NEW No.: 7759J4027 ACCESSORY INFORMATION WITHOUT WARRANTY, subject to alterations, prior sale and errors excepted! Kjdpfxei Rpa Ie Afgelt - .

Condition: used, gearing type: other, fuel type: diesel, mileage: 1,001 km, driver cabin: other, Vehicle location: Bovenden, Klsdpfsi Rpcfex Afget Body: Hydraulic pump USED No.: 2J7366 ACCESSORY INFORMATION WITHOUT WARRANTY, subject to alterations, prior sale and errors excepted! - .

Condition: used, gearing type: other, mileage: 1,001 km, driver cabin: other, Vehicle location: Bovenden, Body: for grader, 6 cylinder engine no. 53A6019 ACCESSORY INFORMATION WITHOUT WARRANTY, subject to alterations, prior sale and errors excepted! Kledpsi Rphgjfx Afget - .

Condition: used, gearing type: other, fuel type: diesel, mileage: 1,001 km, driver cabin: other, Vehicle location: Bovenden, Construction: Hydraulic pump USED Model: CL 75-15 , No.: L049-6067 ACCESSORIES INFORMATION WITHOUT GUARANTEE, changes, prior sale and errors reserved! Kodpfx Afsi Rpcmogolt - .

Condition: used, gearing type: other, mileage: 1,001 km, driver cabin: other, Vehicle location: Bovenden, Body: for grader ACCESSORY INFORMATION WITHOUT WARRANTY, subject to alterations, prior sale and errors excepted! Ksdpfoi Rphcex Afgjlt - .

Condition: used, gearing type: other, fuel type: diesel, mileage: 1,001 km, driver cabin: other, Vehicle location: Bovenden, Body: Hydraulic pump USED No.: 10749J4027 ACCESSORY INFORMATION WITHOUT WARRANTY, subject to alterations, prior sale and errors excepted! Kodpfx Afji Rpa Dogslt - .

Condition: used, gearing type: other, fuel type: diesel, mileage: 1,001 km, driver cabin: other, Vehicle location: Bovenden, Body: Hydraulic pump USED No.: 5749J4027 ACCESSORY INFORMATION WITHOUT WARRANTY, subject to alterations, prior sale and errors excepted! Ksdpfx Aei Rpa Sofgslt - .

Condition: used, gearing type: other, fuel type: diesel, mileage: 1,001 km, driver cabin: other, Vehicle location: Bovenden, Klsdji Rpbajpfx Afgjt Construction: Hydraulic pump USED No.: PH-342BVEW25-2WEW25-1BEW1540-3724 ACCESSORIES INFORMATION WITHOUT GUARANTEE, subject to changes, prior sale and errors! - .

Condition: new, gearing type: other, fuel type: diesel, driver cabin: other, Vehicle location: Bovenden, Body: Hydraulic pump NEW No. : 11748J9238 ACCESSORY INFORMATION WITHOUT WARRANTY, subject to alterations, prior sale and errors excepted! Klsdji Rn Uiopfx Afgst - .

Condition: used, gearing type: other, fuel type: diesel, mileage: 1,001 km, driver cabin: other, Vehicle location: Bovenden, Body: Hydraulic pump USED No.: 4728J7392 ACCESSORY INFORMATION WITHOUT WARRANTY, subject to alterations, prior sale and errors excepted! Kodpfxoi Rn Uqj Afgslt - .

Condition: used, gearing type: other, fuel type: diesel, mileage: 1,001 km, driver cabin: other, Vehicle location: Bovenden, Body: Hydraulic pump USED No.: 10759J8766 ACCESSORY INFORMATION WITHOUT WARRANTY, subject to alterations, prior sale and errors excepted! Kodpfx Aei Rpbdefgslt - .