Yard tractor

Schäffer 3650

Condition: new, Year of construction: 2026, power: 37 kW (50.31 HP), _____Standard equipment: special low-profile design, 3-cylinder Kubota D1803-CR-T diesel engine, 37 kW (50 hp), DOC and DPF to meet emission stage V, hydrostatic all-wheel drive with automatic control, tires 10.0/75-15.3 AS- ET-5 HTF (High Traction Force) SPT (Schäffer Power Transmission), ECO mode, hydraulic quick gear, switchable 20 km/h under load, original Schäffer axles, 6-hole, combined oil cooler, maintenance-free and wear-free disc brake in an oil bath as service and parking brake, maintenance-free articulated oscillating joint, retention system (driver protection roof), LED work lights: 2x front, 1x rear, parallel guidance, additional control unit mechanically operated, work hydraulics, standard / optional: 46/51 l/min, adjustable steering column, operating hour meter, fuel and temperature gauges, rear weight end plate, seat contact switch, quick-change frame SWH with hydraulic locking. Optional equipment: Ijdpfxjzzhb Aj Ah Ejtl Tires 15.0/55-17 AS 6-hole, ET -45, attachment frame Euro-WS, hydraulic locking, counterweight 100 kg, gear pump reinforced 19ccm, additional control unit, electrically operated, ELPRO version, preparation for lighting system, towing device with pin and lashing eyes, storage location: null.

Condition: used, Year of construction: 2007, overall grade 1-5 (1 bad, 5 like new): 4/5 certificates: CE, TÜV Aichi rm04b Year 2007 Hours low Working height 6 m Weight 650kg 0.78 x 1.30m working height: 600 cm Itsdpfx Aoxbr U Hoh Ejl Type: Electric Total weight gvw: 650 kg Maximum lifting capacity: 200 kg Type of drive: Caterpillar drive Maximum lifting height: 600 cm Production country: Japan Urenstand: Laag Werkhoogte: 6 meter Gewicht: 650 kilogram LxB: 0.78 x 1.30m Certificaten: CE, TÜV

Condition: new, Year of construction: 2025, power: 37 kW (50.31 HP), _____Schäffer loader, type 3650, with ROPS operator protection cab Kubota diesel engine D1803-CR-T3, 37 kW = 50 hp Rear weight end plate, high speed gear 20 km/h, hydraulic tool locking, retention system with operating manual Special equipment: Lugged weight 100 kg Hydraulic connections with quick-release couplings Lighting system TÜV certificate for working machinery, self-propelled < 25 km/h (lighting system according to StVZO required) Set of work lights, LED, 800 lumens (2 at the front and 1 at the rear) Towing device with pin and lashing eyes Tires 15.0/55-17 AS, 6-hole rim, offset -45 Attachment frame Euro-WS, hydraulic locking Isdpfx Aex Evdveh Ejtl Location: null

Condition: new, machine/vehicle number: 246203 xxxx, functionality: fully functional, Ideal basis for setting up CNC machines and applications The FB2 flatbed unit is ideal for getting started with CNC technology and is ideal for model making and hobby applications. The FB2 is also often used in industry for measuring and dosing technology, as it offers extensive expansion options. The unit also offers access to the isel modular system. Various sizes from travels of 530 x 500 mm to 1030 x 1250 mm and extensions such as base frame and housing are available and can be individually combined. BEST SUITABLE FOR: • modular isel building block system • universal range of applications • easy handling • ideal for laboratory, model making and workshop use • assembly and mounting • printing and engraving • drilling and milling • dosing and screwing • forming and modeling • gluing and casting • soldering and welding • measuring and testing • sawing and cutting and much more Z-passage = 190 mm (Z-passage = 300 and 500 mm on request!) Itsdpohqmamofx Ah Esl FEATURES: • durable stepper motors in the 200 W range • reliable LES units with steel ball screws are installed as drives • clamping of workpieces using a T-slotted plate • available with and without protective cover • variable gantry apertures, depending on customer application OPTIONS: • iSA milling spindles and water-cooled HF milling spindles • Cooling spray device • Cold air cooling, Cool-Min • Automatic tool length measurement • Rotation units • Workpiece clamping systems (hand lever, vacuum clamping tables, etc.) • Suction systems • LED machine room lighting • RAL color selection • CAD/CAM-Software • Diffusers 190 mm, 300 mm or 500 mm • Powerful 4-axis control controller • Underframe • Enclosure with sliding/folding door

Condition: new, functionality: fully functional, mileage: 0 km, color: red, empty load weight: 2,050 kg, maximum load weight: 650 kg, lifting height: 3,330 mm, digging bucket width: 1,160 mm, Year of construction: 2025, Equipment: pallet forks, standard shovel, TECHNICAL DATA: Model: VOLT 600 Payload (kg): 650 Unladen weight (kg): 2050 Bucket volume (m³): 0.25 Maximum steering angle: ±45° Turning radius (mm): 2050 Rear axle oscillation angle: 19° Full cycle time (s): 8 Operating time (h): 6 Speed (km/h): Slow: 10 km/h, Fast: 20 km/h Dumping height (mm): 2170 Lifting height (mm): 3330 Dimensions (mm): 3810 × 1260 × 2270 Dumping reach (mm): 405 Bucket width (mm): 1160 Wheelbase (mm): 1380 Track width (mm): 890 Ground clearance (mm): 200 BATTERY: Model: 3-EVF-200 Type: Maintenance-free lead-acid battery Quantity: 12 Capacity (kW): 14.4 Nominal voltage (V): 72 Charging time (h): 8 System voltage (V): 12 Electrical system: AC MOTOR: Voltage (V): 72 Power (kW): 5 Displacement (ml/r): 23 Nominal speed (rpm): Slow: 800 rpm Fast: 2200 rpm System pressure (MPa): 16 Hydraulic system: Steering type: Fully hydraulic steering System pressure (MPa): 14 Steering pump: 5–125 Cylinder size (mm): 63 × 190 mm Number of cylinders: 1 DRIVE: System: AC Voltage (V): 72 Itedpfx Ahew Ufplj Eel Power (kW): 4 × 2 Number of motors: 2 Tyres: 26×12.00–12 Tyre pressure (MPa): 0.25 PRICE: €14,500 net €17,255 gross KINGWAY DEUTSCHLAND is the exclusive stationary distributor of the Kingway brand in Germany. Here you can inspect and test all machines on-site. We are the largest importer of construction and agricultural machinery in Europe and the main branch of Kingway in Germany. We have a vast selection of machines in stock, with around 100 units available at any given time. We deliver machinery throughout Germany, Austria, Switzerland, Italy, and other neighboring countries, and provide our customers with access to all spare parts as well as a mobile service. KINGWAY DEUTSCHLAND e. K. Jakub Dylus 84098 Hohenthann Gambacherstr. 4 WAREHOUSE: Untergambach 10 84098 Hohenthann

Condition: new, Year of construction: 2026, Working area: 1500 – 3000 x 2100 – 12000 mm Z axis range: 500 – 1500 mm Linear bearing: Bosch Rexroth 35 Isdon Nv H Sopfx Ah Ejtl Speed: X, Y up to 45 m/min; C, A up to6000 degrees/min Program resolution: 0,0005 mm Positioning accuracy: 0,01 mm Gate drive: double-sided master / slave with gate angle correction Electrospindles: 8 kW up to 36 kW Electrospindle inverter: yes Maximum revolutions of the electro-spindle: 24 000 rpm (option 6000, 40 000 50 000) Construction: Steel welded, ribbed, stress relieved, precision machined Table type vacuum, hybrid, steel, aluminum with M16 or M18 holes

Condition: used, Year of construction: 2023, operating hours: 349 h, Radio-Controlled Tool Carrier with Forestry Mulcher The Energreen RoboEVO is a radio-controlled tool carrier capable of operating in particularly challenging and hard-to-access terrain, with slopes of up to 55°. It is equipped with a powerful 40 HP diesel engine and two double-acting hydraulic control valves to ensure compatibility with a range of attachments. Key Features: * Radio control range up to 150 m * Optimal maneuverability * Traction in all directions on slopes up to 55° * Special oil sump for secure engine lubrication * Multifunctional operation * High productivity with fast completion of tasks * Superior traction on any substrate Special Equipment: * Hydraulic quick couplers "CEJN" * EU DUAL BAND radio control with tilt sensor * PANOLIN HLP SYNTH 46 bio-hydraulic oil * Standard color Orange RAL 2011 / Grey RAL 7021 * Rear radiator guard * Counterweights, total 70 kg * 1 LED work light * 12-Volt LED beacon with bayonet fitting Attachment: Forestry Mulcher Forestry Head 130T with hydraulic quick couplers "CEJN", rotor with fixed tools and material guide frame. Robust and reliable forestry mulcher made of Strenx® steel, ideal for cutting grass, bushes, and reeds up to 10 cm in diameter. Fixed-tool rotor for shredding cut material. TECHNICAL DATA Cutting width: 1,200 mm Oil pressure: 290 bar Number of tools: 32 Oil flow: 55 l/min Hydraulic motor: 23 cm³ Weight: 355 kg We also stock additional grass mulchers, forestry mulchers, brush cutter heads, and a stump grinder. Other attachments such as double-blade mowers, verge mowers, and many other implements available on request! We are pleased to offer suitable financing, hire purchase, or leasing options. Delivery or shipping by arrangement. We always keep a selection of new and used equipment in stock, with additional units available for demonstration. Please contact us! All machines are also available for rent with or without operator. Other notes: * Trade-in and purchase of vehicles and machines possible. * Sale price excludes transport. * No liability for printing or typographical errors. * Subject to error, prior sale, and change. * Offer is non-binding. * Photos may differ. Price applies to current condition. * All information provided without guarantee. Itedpfx Aey E Dt Ejh Eol

Condition: used, functionality: fully functional, Year of construction: 2021, operating hours: 1,390 h, load capacity: 3,300 kg, lifting height: 6,900 mm, fuel type: diesel, mast type: telescopic, construction height: 2,380 mm, power: 75 kW (101.97 HP), fork length: 1,200 mm, empty load weight: 7,700 kg, total length: 4,970 mm, drive type: Diesel, construction width: 2,390 mm, Rigid telehandler Mast type: telescopic Speed class: 20 Technical condition: good Front tyres type: pneumatic Front tyres size: 500/80-24 Front tyres condition: 80–100% Rear tyres type: pneumatic Rear tyres size: 500/80-24 Rear tyres condition: 80–100% 3rd valve, Ijdpfxjyfivks Ah Eetl

Condition: new, functionality: fully functional, power: 18.39 kW (25.00 HP), fuel type: diesel, fuel tank capacity: 55 l, color: red, empty load weight: 3,000 kg, maximum load weight: 1,500 kg, lifting height: 3,300 mm, emission class: euro5, mast type: telescopic, shovel volume: 0.6 m³, digging bucket width: 1,670 mm, Year of construction: 2025, Model: FARMER 812 The FARMER 812 is the ideal machine for agricultural, construction, electrical, sanitary, repair, and service companies as well as similar sectors. We also guarantee service for the machine after the warranty period has expired. The wheel loaders are manufactured based on and under the supervision of European technicians. The equipment is built on a robust frame and is capable of operating under all conditions. The comfortable, glazed cab ensures safe and convenient operation. DIMENSIONS AND WEIGHT: Length (without attachments): 4.0 m Length (with standard bucket): 4.7 m Overall width: 1.5 m Overall height: 2.45 m Operating weight (with bucket): 3000 kg Operating weight (without bucket): 2750 kg Wheelbase: 1.12 m Track width: 2.15 m DRIVE AND TECHNICAL EQUIPMENT: Engine: Diesel, Euro 5 Engine model: DEF20NJF4 Number of cylinders: 4 Engine power: 25 HP Battery voltage: 12 V Ijdpew Ufixjfx Ah Estl Gears: 1 Drive: Cardan shaft Brakes: Drum brakes Parking brake: Disc brakes OPERATING PARAMETERS: Lifting height (lower edge of standard bucket): 2.54 m Maximum lifting height (upper edge of attachment): 3.0 m Maximum lifting height (upper edge of bucket): 3.3 m Dumping height (45°): 2.05 m Maximum lifting capacity (at attachment): 1.5 t Bucket width: 1.67 m Bucket volume: 0.6 m3 Bucket weight: 285 kg HYDRAULIC SYSTEM: Operating pressure: 18 MPa Boom lift time: 4 s Total boom cycle time: 7 s Fuel tank: 55 L Hydraulic oil tank: 65 L Automatic leveling: Yes * Hydraulic quick-hitch system * 2x hydraulic control circuits * Reversing camera * Heating * Ventilation * Radio * Suspension seat * Joystick control * Collapsible steering column * Road and work lights PRICE: €16,800 net €19,992 gross KINGWAY DEUTSCHLAND is the sole stationary distributor of the Kingway brand in Germany. Only here can you inspect and test all machines on site. We are the largest importer of construction and agricultural machinery in Europe and the main German office for Kingway. We offer a huge selection of machines in stock, with around 100 units always available. We deliver machinery throughout Germany, Austria, Switzerland, Italy, and other neighboring countries. We also provide access to all spare parts and mobile service for our customers. KINGWAY DEUTSCHLAND e. K. Jakub Dylus 84098 Hohenthann Gambacherstr. 4 WAREHOUSE: Untergambach 10 84098 Hohenthann

Condition: excellent (used), Year of construction: 2012, Kuka KR 240 R 2900 C Ultra Arm reach: 2896 mm Itoden R Nh Ropfx Ah Ejl Payload: 240 kg Year of manufacture: 2012 Controller: KUKA KRC4 Robot designed for suspended mounting.