Condition: new, Jensen Batch Washer 5 pieces: Valve flange seal, drain valve Jensen 700237382 8 pieces: Seal for steam injector, 370x140x4 Hodpfx Agoy Uih Ts Usn 2 pieces: Seal, steam injector 9005220191

Condition: new, Jensen Drain Valve, DN 100 Hedpfx Agey Uigij Uon Jensen Article No. 700280766

Condition: like new (used), Posimon roller drum, 110 mm, with holder Hjdpfx Aoy Uim Asg Uen For batch washing machines from Jensen.

Condition: used, functionality: unexamined, Jensen VT 16 Hjdpfxsy Uiu Hj Ag Uon

Condition: new, 9 Jensen sensors Hsdpey Ukgwofx Ag Uen OPR 2 ND 99812

Condition: new, Jensen Steam Injector Hodpfx Agoy Uigvj Uon 370x140

Condition: new, 3 units of PT100/1000 Jensen. Hodpoy Ukgdefx Ag Uon

Condition: new, Year of construction: 2026, power: 36.77 kW (49.99 HP), motor manufacturer: YUNNEI, gearing type: mechanical, fuel type: diesel, Equipment: air conditioning, cabin, 50HP Tractor 4WD • Cabin • AC • NEW • 504 Brand new 50HP tractor (model 504) with cabin and air conditioning. Ready to work. 4WD system and reliable diesel engine. Perfect for agriculture and general use. Manual transmission • up to 32 km/h Hedpfxoy Er H Ho Ag Uen

Condition: excellent (used), functionality: fully functional, Year of construction: 2014, operating hours: 885 h, motor manufacturer: John Deere, gearing type: automatic, fuel type: diesel, first registration: 05/2026, Equipment: air conditioning, cabin, front power take-off, hydraulics, John Deere 1585 lawnmower with a 900-liter grass collection bin, road approval, all-wheel drive, 60-inch mowing deck, additional control unit at the front, and air conditioning. Hjdpfx Agjy Uh E De Uon

Condition: used, Year of construction: 2024, In accordance with our "General Terms and Conditions," without any warranty whatsoever, we can offer you the following vehicle, subject to availability until sale, errors and omissions excepted: HAWE ULW 3000 Overload Trailer Demo vehicle Manufactured in 2024 Low mileage, primarily used for exhibitions Load volume approximately 38 cubic meters Roller tarp Suspension: mechanical equalization with leaf spring suspension Wheelbase 1,810 mm Tires 710/50R26.5 BKT FL 630 Ultra, approximately 80% tread remaining Hydraulic, lockable trailing steering Fixed drawbar K 80 drawbar eye Drawbar height 600 mm Hydraulic support leg Type of operation: manual operation via tractor controls LED work lights inside, at the discharge point, LED traffic lights Camera system with 3 cameras: position at the discharge point, inside rear wall, reversing camera PTO shaft connection 1 3/8", 6 tons Wide-angle shaft: with wide-angle joint on the tractor side Hedpsy Uf Hxofx Ag Uen Price: €95,000.00 (net) All information is provided without any warranty whatsoever. Our "General Terms and Conditions" apply. The place of jurisdiction for both parties, up to a dispute value of €5,000.00, is the local court of Ludwigslust; for dispute values exceeding this amount, it is the regional court of Schwerin. Errors, omissions, and prior sale excepted.

Condition: used, Year of construction: 2021, operating hours: 1,120 h, power: 53 kW (72.06 HP), Equipment: all wheel drive, front linkage, * German-made machine, first owner, in very good condition * TABMC040VK5115005 * Full service history * Road approval, 40 km/h * 4x4 all-wheel drive * Year of manufacture: 2021 Hodpfey Ubguex Ag Usn * Operating weight: 6,200 kg * Tires: 340/85 R24 (front), 420/85 R34 (rear), approximately 80% tread * * I would be happy to send you a video via WhatsApp * WhatsApp: * Polish contact: [Phone number] * Sale only to businesses, no warranty, all information without guarantee, subject to prior sale.

Condition: good (used), Year of construction: 2016, Type of fuel: Petrol Empty weight: 765 kg Technical condition: good Visual appearance: good Serial number: SG0732 Transport dimensions (LxWxH): 1,91x0,92x1,3 Rental currency: EUR Please contact PFEIFER GROUP, Pfeifer Heavy Machinery Poland or Pfeifer Heavy Machinery United Kingdom for more information Manufacturer: Barreto Typ: 30SG Building year: 2016 Fuel: Gasoline Serial number: SG0732 Hydraulically driven cutting wheel Ø 49 cm with 16 teeth Cutting head swing: 83°, 120 cm arc Cutting head operation: Joystick Hodpfx Agouckuao Ujn Max. working depth: 35 cm Max. working height: 81 cm Weight: 765 kg Dimensions 191 x 92 x 130 cm (l x w x h) CE (Declaration of Conformity)

Condition: used, Neat fire hose manure hose Weight per piece: 42 kg Storz 6 inch (150 mm) Length: 20 meters Price per piece: € 150,- ex VAT Hedpfx Agowgpnwe Uon More than 200 pieces in stock!!

Condition: like new (used), For sale: agricultural tandem platform trailer. The trailer features two platforms: the first is 200 cm long and the second is 1230 cm long, with a width of 248 cm. Additionally, the trailer is equipped with: - LED lighting Hsdjxpakfepfx Ag Uon - Both axles are steerable, manufactured by COLAERT ESSIEUX, the market leader in France - Hydraulic brakes - Trailer weight: 8,000 kg - Frame made of 250 mm x 150 mm profile, with 6 mm thick chequer plate (tear plate) The entire construction is exceptionally robust.

Condition: new, Year of construction: 2025, power: 40 kW (54.38 HP), motor manufacturer: New Holland, gearing type: mechanical, fuel type: diesel, = Additional options and accessories = - PTO = Remarks = Country of origin: India Displacement: 2,931cc Torque: 203 @ 1400 Nm @ rpm Dimension: 3,500 x 1,920 x 2,200 axle configuration: 2WD No. of cylinders / aspiration: 3 / naturally Capacity (cm³): 2931 Bore x stroke (mm): 104x115 Power @rated speed (2300 rpm) - ECE R120 (kW/hp): 40.25 / 54.0 Max. torque (gross) (Nm@rpm): 203 @ 1400 Torque rise (%) 25 Transmission - 30 kph 8F+2R constant mesh & sliding mesh (optionally synchronised on 3th & 4th gear) with epicyclical reduction for low - high range selection Speed range (kph) 2.97-29.74 Optional with creeper (F+R) 12+3 Min. speed with creeper (kph) 0.96 Optional without creeper (F+R) 12+3 Hodpsy Tyg Djfx Ag Ujn Speed range (kph) 2.0-29.74 Flexion Bar lower link draft sensing Standard Rear linkage category Cat. II Mechanical lift with Lift-O-Matic™ Standard Position draft mixed and float controls Standard Main pump flow - Standard (lpm) 45 Steering pump flow (lpm) 28 Max. number of remote valves 2 Linkage Maximum lift capacity at ball ends with no assist arms (kg) 1400 Maximum lift capacity at ball ends with assist arms (kg) 1850 Engine speed at 540 rpm (rpm) 1967 PTO activation mechanical Turn angle 2WD/4WD (°) 52/38 Min. turn radius w/brakes 2WD/4WD (mm) 3205/4200 Dimensions Overall length 2WD/4WD (mm) including FWC 3500 Overall width 2WD/4WD (mm) 1920 Height to top of exhaust 2WD/4WD (mm) 2200/2200 Wheelbase 2WD/4WD 2050/2005 Track width Front 2WD (mm) 1410-1710 Track width Front 4WD (mm) 1445-1875 Track width Rear Min. / Max. (all axle types) (mm) 1570-2100 Ground clearance under rear axle (2WD/4WD) (mm) 455/434 Weights Minimum weight 2WD/4WD (kg) (With ROPS & FWC 55Kg) 2200/2400 = More information = Drive: Wheel Number of cylinders: 3 Engine capacity: 2.931 cc GVW: 2.200 kg Wheelbase: 205 cm Engine type: New Holland S8000 Emission class: Euro 2

Condition: new, Year of construction: 2025, power: 40 kW (54.38 HP), motor manufacturer: New Holland, gearing type: mechanical, fuel type: diesel, maximum speed: 30 km/h, total height: 2,200 mm, total length: 3,500 mm, total width: 1,920 mm, = Additional options and accessories = - PTO = Remarks = Country of origin: India Displacement: 2,931cc Torque: 203 Nm @ 1400 rpm Dimension: 3,500 x 1,920 x 2,200 No. of cylinders / aspiration: 3 / naturally Capacity (cm³): 2931 Bore x stroke (mm): 104x115 Power @rated speed (2300 rpm) - ECE R120 (kW/hp): 40.25 / 54.0 Max. torque (gross) (Nm@rpm): 203 @ 1400 Torque rise (%) 25 Transmission - 30 kph 8F+2R constant mesh & sliding mesh (optionally synchronised on 3th & 4th gear) with epicyclical reduction for low - high range selection Speed range (kph) 2.97-29.74 Optional with creeper (F+R) 12+3 Min. speed with creeper (kph) 0.96 Optional without creeper (F+R) 12+3 Speed range (kph) 2.0-29.74 Flexion Bar lower link draft sensing Standard Rear linkage category Cat. II Mechanical lift with Lift-O-Matic™ Standard Position draft mixed and float controls Standard Main pump flow - Standard (lpm) 45 Steering pump flow (lpm) 28 Max. number of remote valves 2 Linkage Maximum lift capacity at ball ends with no assist arms (kg) 1400 Maximum lift capacity at ball ends with assist arms (kg) 1850 Engine speed at 540 rpm (rpm) 1967 PTO activation mechanical Turn angle 2WD/4WD (°) 52/38 Min. turn radius w/brakes 2WD/4WD (mm) 3205/4200 Dimensions Overall length 2WD/4WD (mm) including FWC 3500 Overall width 2WD/4WD (mm) 1920 Height to top of exhaust 2WD/4WD (mm) 2200/2200 Wheelbase 2WD/4WD 2050/2005 Track width Front 2WD (mm) 1410-1710 Track width Front 4WD (mm) 1445-1875 Track width Rear Min. / Max. (all axle types) (mm) 1570-2100 Ground clearance under rear axle (2WD/4WD) (mm) 455/434 Weights Minimum weight 2WD/4WD (kg) (With ROPS & FWC 55Kg) 2200/2400 = More information = Drive: Wheel Number of cylinders: 3 Engine capacity: 2.931 cc GVW: 2.400 kg Hodpfx Agjy Tyg Rj Uon Wheelbase: 205 cm Engine type: New Holland S8000 Fuel tank: 60 litres Emission class: Euro 2

Condition: good (used), functionality: fully functional, Year of construction: 2023, working width: 5 mm, color: original, empty load weight: 2,310 kg, For sale: a Köckerling Allrounder 530 2.0 Width: 530 cm Weight: 2310 kg Hsdpfx Aoy Tzh Ajg Usn Year of manufacture: 2023

Condition: ready for operation (used), functionality: fully functional, Year of construction: 2017, gearing type: mechanical, color: red, total height: 2,750 mm, machine/vehicle number: 178-017-2183, Equipment: front power take-off, lighting, A well-maintained Kongskilde VM 20 feed mixer. Always meticulously maintained, with oil changes performed annually. The PTO shaft has been used for 1 year, and the blades have also been used for 1 year. The feed mixer has not been used for the last 3 years. Load volume: 20 m3 / 20,000 L. Year of manufacture: 2017. Hjdoy Tuh Aopfx Ag Usn Registered. Equipped with: weighing system/scale, camera, metal magnet, central grease fitting block. Height: 2750 mm.

Condition: used, functionality: fully functional, Year of construction: 2000, color: grey, overall weight: 2,980 kg, total height: 2,300 mm, total length: 5,520 mm, total width: 2,540 mm, working width: 1,700 mm, Beach cleaner: + CanicaS + Type T170 H + Drive for belt and rake via PTO (540 or 1000 rpm) + new belt + hitch triangle for tractor + smoother and collection container, hydraulically operated + year of manufacture: 2000 + fully galvanized + required tractor power: 60 hp + area output: 20,000 m²/hour Hjdpfx Aoy Tmqpeg Ujn + 552cm x 254cm x 230cm (l x w x h) + unladen weight: 1,980 kg; permissible gross weight: 2,980 kg + working width: 170cm + collection container: 1400 l + municipal equipment from a single owner Receive all newly listed vehicles by email – sign up for our NEWSLETTER! Errors and typographical errors possible, subject to prior sale!

Condition: used, Year of construction: 2014, machine/vehicle number: 78300122, Drive type: Diesel, power: 308 kW, displacement: 10,600 cc, unladen weight: 16,170 kg, permitted total weight: 18,000 kg, with 2 driven axles, recorded mileage: 64,407 km, operating hours: 7,640 hrs, with category 4 rear hitch, mechanical, hydraulic top link, cat. 3, mounting for front weight, 5 additional control valves with breakaway couplings at the rear, rear PTO 1,000 rpm, PTO shaft 1 3/4, 6-spline, engine OM470 K 97/68 308 kW t4, fuel tank extension by 190 liters, refrigerator, semi-active cab suspension, fire extinguisher, GPS Pilot S10 RTK radio; NOTE: Steering shows error message Hedpfx Agjy Rvlke Ujn

Condition: used, Year of construction: 2023, operating hours: 2,096 h, power: 37 kW (50.31 HP), maximum speed: 20 km/h, Operating hours: 2096. Equipped with ROPS operator protection roof. Kubota diesel engine D1803-CR-T3, 37 kW = 50 hp. Rear weight end plate. High-speed gear: 20 km/h. Hydraulic tool locking. Retention system. Special equipment: Rear frame with widened fenders. Lugged weight 100 kg. Tires: 15.0/55-17 AS, 6-hole, ET -45. Gear pump, reinforced, 19 ccm (requires 37 kW engine). Work light set, LED, 800 lumens (2x front, 1x rear). Attachment frame, Euro-W. Hydraulic locking. Towing device with pin and lashing eyes. Location: Mayer eGbR. Hodpfx Aexmrvuog Ujn

Condition: used, Year of construction: 2005, gearing type: other, first registration: 01/2005, color: orange, mileage: 1,001 km, empty load weight: 1,690 kg, driver cabin: other, Vehicle location: Bovenden, Unladen weight approximately 1690 kg! Hsdpfx Ajy Tbg Ssg Uen Drive type: E2940HFS ACCESSORY INFORMATION PROVIDED WITHOUT GUARANTEE, subject to change, prior sale and errors!

Condition: used, Applicable material: Hay Working width: 730 cm Hsdey Ta Axopfx Ag Ujn

Condition: used, color: orange, = Additional options and accessories = Hsdey S T A Nspfx Ag Usn - Spare wheel

Year of construction: 2020, condition: new, PLC microprocessor control • HMI operator panel Hedpofz Dvcefx Ag Uen • Phases changed manually or automatically - temporarily • Two separate circuits for water and chemistry, closed circuit • Intelligent control - in the event of a power cut / sudden shutdown, no mixing of liquids possible The control box is made of IP54 technology User manual, Declaration of conformity, 12 months warranty. ROMER pressure washers use metal sheet that provides protection against chemicals. The washer walls protect against splashing, thanks to the closed chemistry loop, the process can be carried out with small amounts of chemistry. Due to the small amount of refrigerant required, it is easy to heat and cheaper to buy, it also allows you to wash large dimensions impossible to wash in bath tubs. Filtration system Thanks to the filtration system, the chemistry works in a closed circuit, 3 filters of different thickness are used, which prevent garbage and grease from entering the circulation. The chemistry is stored in heated stainless steel tanks from where it is fed by a pump under pressure to the lance Washing of dimensions The pressure washer allows washing of large elements, optionally has a rotating platform that allows rotation of the cleaned element, elements can be applied to it with a forklift or crane. High pressure pumps The car wash has two preparation phases, both treatments have separate sets of pipes, pumps, wires and guns to minimize mixing of these agents during phase change. Drains have separate valves that manage the return of funds. The carwash is equipped with a logic controller that controls all components. The chemistry is pumped up to 20 bar using a very durable, acid-resistant AISI304 pump with several stages, 3 kW. The rinsing phase uses a high pressure piston pump with ceramic pistons with a capacity of 3kW and provides 160 - 200 bar.