Double Column Milling M/C - Gantry Type

....... .......

Year of construction: 2009, condition: used, Year : 2009 Type: Vibrating sieve Material : stainless steel Engine reference: Elettromeccanica Tarcisio Pugni PVF-F 200 Motor power: 1.1 kW / 1500 rpm Fgjdpeykb U Nsfx Ad Ied Nominal sieve diameter: 900 mm Système de décolmatage : billes Machine dimensions: 110 x 130 x 120 cm Plan for replacement of the grid: this item may be subject to a separate quotation.  

Condition: used, Year of construction: 1984, turning diameter over cross slide: 1,600 mm, turning diameter: 2,000 mm, turning diameter over bed slide: 2,000 mm, turning length: 35,000 mm, workpiece weight (max.): 63,000 kg, Center Lathe SKODA - SUT 200 TD MACH-ID 9446 Manufacturer: SKODA Model: SUT 200 TD Year of manufacture: 1984 Tandem construction on one bed, with left and right headstocks Faceplate double tailstock left and right Double carriage Steady rest included Roller rest included Operator panel with scales requires attention and replacement Motorized tailstock for each side (left and right) 3-bed way design Torque on chuck: 160,000 Nm Minimum turning diameter: Ø 315 mm Industries served: - Shipyards - Propeller shaft manufacturing - Hydraulic cylinder shafts - Camshafts - Defence & Aerospace - Rolls and shafts for steel mills - Crankshafts Fedpfx Adoynky As Ijgd Specifications Metric / Imperial Turning length: 35,000 mm Swing over bed: Ø 2,000 mm Swing over carriage: Ø 1,600 mm Spindle power: 75 kW Bed width: 1,600 mm Quill diameter: Ø 400 mm Quill stroke: 250 mm Max spindle speed: 180 rpm Feed X-axis: 5,000 mm/min Feed Z-axis: 5,000 mm/min Workpiece weight: 63,000 kg Approximate dimensions: Length: 42,000 mm Width: 3,250 mm Height: 3,250 mm Weight: 158,000 kg Please note: The information on this page has been provided to the best of our knowledge and, where possible, obtained from the manufacturer. The information is given in good faith, but accuracy cannot be guaranteed. Accordingly, they do not constitute representations or contractual terms. We recommend verifying all important details.

Condition: used, Dimensions 150 x 160 x 200 cm. Main outlet diameter 10 cm. 2 valves front and back for draining. Fgodpfxszg Naqs Ad Isd

Condition: reconditioned (used), A completely refurbished infeed for Resaw in excellent condition Fjdpfx Ajhpyaked Isgd

Year of construction: 1998, condition: good (used), Make: UNION Type: Ti 1800 Year: 1998 Specifications Metric US Standard Table Length 2000 mm Table Width 1800 mm Table load 16000 Movement V-axis 1250 mm Rotation B-Axis 360.000 ° Rotation speed B-Axis 1,35 Omw/min. Movement speed V-axis 4000 mm/min. Fsdpfx Askwcdbsd Isgd Dimensions (Estimate) Length 3400 mm Width 2000 mm Height 920 mm Weight 6500 kg Please Note: The information on this page has been obtained to the best of our ability and belief, and from the manufacturers where possible. It is given in good faith, but its accuracy can not be guaranteed. Accordingly, it will not form a representation or constitute contractual terms. We advise you to check any vital details!

Condition: used, details on request Fededgxnyjpfx Ad Isgd

Condition: used, Grinding quills: 16 - 40 mm Fsdediuiropfx Ad Ijgd

Condition: good (used), CHARACTERISTICS Plate diameter ⌀; 3200 mm Maximum turning/turning diameter ⌀; 3300 mm - With upright forward; 3300 mm Fgedpor I Aykefx Ad Iod - With upright set back; 5600 mm Min. turning/turning diameter ⌀ - With advanced upright; 800 mm - With upright set back; 3100 mm Max turning height; 750 mm Control; FAGOR 8025 Spindle RPM (2 ranges); - 0,5 - 10 rpm - 10 - 40 rpm Motor Power; 80 hp Maximum table load; 30.000 kg

Condition: repair required (used), functionality: unexamined, conveyor belt length: 8,100 mm, conveyor belt width: 300 mm, total length: 8,200 mm, Used conveyor belt, approximately 8 m in length, belt width 30 cm, drive via gear. Fgodpfxezcunmo Ad Iod

Condition: used, Type : Stirrer / Dissolver Wall support: manual Previous use: paint Fgodpfx Adjx R Ayhj Isd Stirring mechanism: dispersing tool Stirring head diameter: 200 mm Stirring shaft length: 950 mm Up/down travel: 950 mm

Condition: used, Year of construction: 1999, x-travel 4000 mm y-travel 1000 mm z-travel 1500 mm Control Heidenhain 355 Fgedoxzuz Nepfx Ad Isd weight max. 10 t ja more pictures available

Condition: used, Type: Three-roll mill Roll width: 150 mm Fodpfxjy Abb Ij Ad Isgd Roll diameter: 75 mm Number of rolls: 3 Safety sensor Control panel    

Condition: used, overall weight: 10,000 kg, power: 55 kW (74.78 HP), Electro-Hydraulic orange peel grab, 6tines, weight 10000kg, about 6m3, with radiation meter Fgodpfxjy Ia H To Ad Ied

Condition: ready for operation (used), Year of construction: 1969, Centre height: 355 mm Fedsxpuu Eopfx Ad Isgd Centre distance: 3000 mm Max. swing diameter over bed/gap/cross slide: 715/790/520 mm Spindle bore: 86 mm Spindle mount according to DIN 55027: Size 11 Quill taper of tailstock: MK 5 21 spindle speeds: 5.6 - 560 rpm 42 feeds longitudinal/cross: 0.09 - 5.6/0.045 - 2.8 mm 22 Whitworth threads: 2 - 28 TPI 28 metric thread pitches: 1 - 14 mm 27 module thread pitches: 0.25 - 3.5 module 32 module threads: 4 - 56 module 32 diametral pitch threads: 8 - 112 DP Drive motor, pole-changeable: 380 V, 7/11 kW Weight approx.: 7 t Space requirement approx.: 6000 x 2300 mm

Condition: good (used), tank capacity: 910 l, 910-liter stainless steel 316 reactor with jacket made of stainless steel 316L, hermetically insulated, featuring a control panel and agitation system. Control panel description: Endress+Hauser HMI screen “Emergency reset” indicator light Mushroom-type emergency stop button RPM display Product temperature display 3-position agitator selector (1- top agitation, 2- bottom agitation, 3- both simultaneously) Fsdpfey Hfw Uex Ad Iogd Top agitation: off-centered three-blade propeller type located at the upper bottom, manufactured by SPX, model Lightnin SR5S200 with a 0.37 kW motor. Magnetic agitation at the lower bottom with a 0.55 kW motor.