Tool presetter
Zoller Venturion 450

Name: Zoller Venturion 450
Brand: Zoller
Availability: InStock

Year of construction

2016

Condition

Used

Location

Velten

Basic data

Machine type:: Tool presetter

Manufacturer:: Zoller

Model:: Venturion 450

Year of construction:: 2016

Condition:: excellent (used)

Price & Location

Location:: Parkallee 5, 16727 Velten, Deutschland

Call

Technical details

Dimensions and weight

Overall weight:

420 kg

Axis specifications

Travel distance X-axis:

210 mm

Travel distance Z-axis:

450 mm

Further details

Tool diameter:

420 mm

Details about the offer

Listing ID:: A23184661

Update:: 22.10.2026

Description

ZOLLER venturion 450 – CNC setting and measuring device, year of manufacture 2016, very little use

The machine was purchased by the previous owner as an additional device and was practically not used; it was sold because it is no longer needed. Accordingly, the usage is very low – the machine is in new condition and fully functional. It is located in Velten and can be inspected while powered on by arrangement.

THE ADVANTAGES
- Very little use, new condition, last ZOLLER maintenance 12/2022
- CNC drives in X, Z and C: Cutting edge is automatically approached, focused and measured – independent of the operator, even with multi-cutting tools
- Non-contact optics with transmitted and incident light: Contour, breakouts, wear and corner radius are detected
- pilot 3.0: automatic cutting edge detection, zero point monitoring, tool and adapter management, test protocol, data transfer to the machines
- Immediately ready for use with control unit, label printer and adapters SK 40 / VDI 40 / VDI 50

TECHNICAL DATA
- Measuring range Z 450 mm · X radius 210 mm (tool Ø up to 420 mm) · Internal jaw depth Ø 100 mm
- max. tool weight 50 kg
- 100–240 V~, 50/60 Hz, 1 kVA · Compressed air 6–8 bar
- W × D × H 2500 × 810 × 1710 mm · Weight 350 kg + control unit approx. 80 kg

EQUIPMENT ACCORDING TO FACTORY EQUIPMENT LIST ZOLLER (05/13/2016)
1. Z05MK446.11 USB camera with optics and integrated LED incident light
2. Z05E6187 Transmitted light "pilot" "DLR" / V-series
3. Z05E6127.11 USB camera with optics and integrated LED incident light
4. V429530-01 HGV-ACE mounting assembly vent. 450+600
5. V429515 Accessory kit for drive and ROD "venturion 450/600"
6. N001831 Drive unit linear CNC/"usbmotion"
7. N001831 Drive unit linear CNC/"usbmotion"
8. N001918 Drive unit rotary CNC/"usbmotion"
9. Z05E6024 Foil keyboard "smart-size" for electronics-Z80
10. Z05E7026-01 USB motion controller
Todj Advkzjpfx Apded
11. Z05E6038-00 Valve module Z100-V
12. Z05E6037-20 24V voltage distribution with fuses
13. Z05E6035-10 Lighting module Z100-L
14. Z9700910-36 ZOLLER measuring device control 11th generation panel PC 24" 2980U
15. Z9734883-01 Printer for TH labels, print width 25–108 mm
16. Z9734883-02 Power supply 24V DC 2.5A 60W, 100–240V AC 50/60Hz

ADDITIONALLY INCLUDED
- Adapters SK 40, VDI 40 and VDI 50
- Control unit on stand with monitor, keyboard and mouse
- Software ZOLLER pilot 3.0
- Cables and small parts as shown in the photos
Tools and tool holders are not included in the scope of delivery.

SERVICE
By arrangement: Installation and commissioning · Training · Demonstration under power in Velten · Transport.

TRANSACTION
Location 16727 Velten near Berlin · FCA Velten incl. loading · 100% prepayment · Delivery 1–2 working days after payment receipt. Data sheet as PDF attached.

Technical data according to nameplate, operating manual and factory equipment list (information, not a guarantee of quality according to §§ 434, 443 BGB). Errors and prior sale excepted.

The listing was translated automatically. Translation errors are possible.

Seller

Registered since: 2014

2 listings online

Call

Send inquiry

Telephone & Fax

+49 179 7... show

These listings may also fit your interest.

Listing

Chamber furnace, electric, 260°C oven Nabertherm N9000/26 HAS 1 9000 LIter

Meiningen

18,424 km

Chamber furnace, electric, 260°C oven
NaberthermN9000/26 HAS 1 9000 LIter

Call

Condition: refurbished (used), Year of construction: 2010, machine/vehicle number: SN214289, functionality: fully functional, Completely overhauled, electrical system renewed including conversion to thyristor technology, as well as installation of new controllers! -Maximum temperature 260°C -Capacity 9000 liters -Nabertherm controller P 300 (9 programs, each with 40 segments) -HAS (High-Accuracy System), a highly accurate system for temperature control and documentation -Double door -Internal dimensions W x D x H 1500 x 3000 x 2000 mm -External dimensions W x D x H 2400 x 3860 x 2830 mm -Temperature limit selector -Thermocouple type K -Signal column -Access ramp, oven with bottom insulation, high temperature uniformity -Circulation rate 18000 m³/h -Power 93 kW -Documentation, CE -Electrically tested and with current DGUV test report Tedpsyxl Epsfx Apdsd The oven is calibrated according to DIN 17052 as of February 2025. This standard ensures that the temperature throughout the oven chamber is within defined tolerances. Suitable for applications such as heat treatment of metals or in additive manufacturing (3D printing) when processes that comply with standards are required. Inspection can be arranged at our warehouse at any time. We offer new and used industrial ovens, which we can also modify and expand according to customer requirements. Oven, furnaces, drying oven, industrial oven, drying cabinet, heat treatment oven, heat chamber, convection oven, chamber oven, heating oven, chamber convection oven, tempering oven, annealing oven, hardening oven.

See details

Listing

Vacuum hardening furnace 1350°C WMU GmbH HVF 100 Rkk

Meiningen

18,426 km

Vacuum hardening furnace 1350°C
WMU GmbHHVF 100 Rkk

Call

Condition: excellent (used), Year of construction: 2008, functionality: fully functional, number of chambers: 1, actuation type: electric, Equipment: CE marking, documentation/manual, In-stock item, available for immediate delivery -Tmax 1350°C -Usable space LxWxH (mm) 600 x 500 x 500 -Batch weight 300 kg -Normal operating pressure 10⁻³ mbar -max. cooling gas pressure 6 bar abs. -External dimensions LxWxH (mm) 4200 x 2500 x 3500 -Space requirement LxWxH (mm) 5000 x 5000 x 4000 -Weight (net) 13000 kg -Total connected load 125 kVA -Connection voltage 400 V -Current fuse 250 A -Control system: Stange SE 607 -Documentation Todpfjzr U Anox Apdsd Included: -Protective gas buffer tank -Vacuum pump stand -4-flap design for cooling, allowing the flow direction of the gas flow to be adjusted horizontally or vertically. -Option for liquid nitrogen connection, enabling cooling to -80 °C inside the furnace. -Internal insulation made of graphite hard felt, protected and reinforced with CFC. You can find the detailed description as a PDF in the advertisement! We offer new and used industrial furnaces. Inspections in our warehouse are available upon request! Industrial furnace, vacuum furnace, vacuum furnaces, vacuum hardening furnace, hardening furnaces, sintering furnace, sintering furnaces.

See details

Listing

CNC turning and milling center DMG MORI CTX 510 ECOLINE

Bochum

18,527 km

CNC turning and milling center
DMG MORICTX 510 ECOLINE

Call

Condition: excellent (used), Year of construction: 2014, functionality: fully functional, Maximum turning diameter: 465 mm Maximum swing diameter: 680 mm Control system: Siemens Travel range X-axis: 300 mm Travel range Z-axis: 1,050 mm Turning length: 1,050 mm Maximum spindle speed: 3,250 rpm Spindle bore: 76 mm Includes driven tools Number of positions in the tool turret: 12 stations Chuck diameter: 250 mm Todpfsz Ri U Isx Apdod Maximum workpiece weight between centers: approx. 350 kg

See details

Listing

Coordinate measuring machine Zeiss Prismo Navigator 16/18/10

Germany

18,384 km

Coordinate measuring machine
ZeissPrismo Navigator 16/18/10

Call

Condition: used, Year of construction: 2006, Measurement range width/length/height: 1600/1800/1000 mm Dimensions width/length/height: 2450/2940/3800 mm Maximum workpiece weight: 3500 kg Measurement machine weight: 8500 kg Creep feed: 0 - 5 mm/s Setup operation: 0 - 70 mm/s Series measurement operation Axis: max. 300 mm/s Vector: max. 425 mm/s Tjdpjzn Iucsfx Apded Software version: Calybso 2023/ Service Pack 2 – Version 7.6.08 Various measuring probes Measuring head

See details

Listing

Forklift trucks / electric forklift trucks Jungheinrich EFG 425 K

Dorsten

18,524 km

Forklift trucks / electric forklift trucks
JungheinrichEFG 425 K

Call

Condition: ready for operation (used), functionality: unexamined, machine/vehicle number: FN41918, Year of construction: 2011, load capacity: 2,500 kg, lifting height: 2,900 mm, fuel type: electric, battery capacity: 620 Ah, battery voltage: 80 V, empty load weight: 3,310 kg, color: yellow, Equipment: cabin, Forklift trucks | Electric forklift trucks Electric 4/wheel forklift truck from Jungheinrich Tedporwxkwofx Apded Type EFG 425 K Year of construction 2011 Viewing is possible at any time by appointment. - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - #Tags: Jungheinrich | EFG 425 K | EFG425

See details

Listing

Vertical machining center DMG MORI ecoMill 600V

Schijndel

18,597 km

Vertical machining center
DMG MORIecoMill 600V

€46,000

ONO plus VAT

Call

Condition: ready for operation (used), Year of construction: 2015, operating hours: 6,361 h, functionality: fully functional, travel distance X-axis: 600 mm, travel distance Y-axis: 560 mm, travel distance Z-axis: 510 mm, rapid traverse X-axis: 36 m/min, rapid traverse Y-axis: 36 m/min, rapid traverse Z-axis: 30 m/min, controller manufacturer: Siemens, controller model: 840D ShopMill, workpiece length (max.): 900 mm, workpiece width (max.): 560 mm, workpiece height (max.): 630 mm, workpiece weight (max.): 600 kg, total height: 3,000 mm, total length: 4,000 mm, total width: 5,000 mm, table width: 900 mm, table length: 560 mm, table load: 600 kg, overall weight: 5,000 kg, spindle speed (max.): 12,000 rpm, operating hours of spindle: 6,361 h, spindle nose: SK40 (DIN69871), number of spindles: 1, number of slots in tool magazine: 30, input voltage: 400 V, Equipment: chip conveyor, documentation/manual, rotational speed infinitely variable, Beschrijving Deze Japanse DMG MORI ecoMill 600V hebben wij werkend uit productie overgenomen en is in frisse staat. De CMX 600V (ecoMill 600V) is voorzien van een C-frame constructie (klassieke opbouw) en beweegbare tafel (x-as) wat bedoeld is voor algemeen/all-round freeswerk. Aanvullende opties & accessoires: Siemens 840D SlimLine incl. 3D-simulatie. PROGRESSLine (weergave van de resterende productietijd en het aantal stuks van een volledig bewerkingsproces). Tsdpfx Apey Dg Euedjd Spanentransporteur Spoelpistool Voorbereiding voor interne cooling. Originele documentatie Gewicht & afmetingen: 400x500x300 cm +/- 5.000 kg

See details

Listing

Twin Travelling Crane Konecranes CXT 12t

Germany

18,384 km

Twin Travelling Crane
KonecranesCXT 12t

Call

Listing

Horizontal machining center Heller+FPT1000 HF5500+FPT1000

Eisfeld

18,407 km

Horizontal machining center
Heller+FPT1000HF5500+FPT1000

€695,000

EXW Fixed price plus VAT

Call

Condition: ready for operation (used), Year of construction: 2023, operating hours: 8,900 h, functionality: fully functional, Heller HF5500 including Fastems FPT 1000 Heller HF5000 5-axis machining center Control: Siemens Sinumerik SL Spindle: HSK100 Tool magazine: 100 tools Fastems FPT1000 18 pallet stations Tsdpsw I Tupefx Apdjd Planning software (unmanned shift)

See details

Listing

CNC turn-mill center Gildemeister CTX 510 CTX 510

Hagen

18,523 km

CNC turn-mill center
Gildemeister CTX 510CTX 510

Call

Condition: used, Year of construction: 2004, functionality: fully functional, turning length: 1,000 mm, turning diameter over cross slide: 350 mm, TECHNICAL DATA Turning diameter: max. 465 mm Turning length: 1050 mm Diameter when turning: 680 mm Chuck diameter: 325 mm X-axis travel: 300 mm Z-axis travel: 1050 mm Control system: Fanuc Series 21I-TB Spindle speed range: Max. 3500 rpm Drive power: 33 kW Torque: max. 630 Nm Bearing diameter in the spindle: 120 mm Max. bar diameter: 90 mm Tailstock stroke: 850 mm Tool post stroke: 150 mm Rapid traverse X/Z: 30 m/min Number of tool positions: 12 positions Tool holder: VDI 40 Todpfx Apjv Epzvjdjd Accessories: Chip conveyor Tool holders, chuck jaws

See details

Listing

Limeshain

18,527 km

CNC lathe
INDEX C2002025

Call

Condition: excellent (used), Year of construction: 2025, operating hours: 4,077 h, functionality: fully functional, machine/vehicle number: 10511079, turning length: 550 mm, turning diameter: 160 mm, spindle bore: 65 mm, spindle speed (max.): 6,000 rpm, spindle speed (min.): 140 rpm, travel distance X-axis: 110 mm, travel distance Y-axis: 100 mm, travel distance Z-axis: 320 mm, spindle motor power: 32,000 W, rapid traverse X-axis: 30 m/min, rapid traverse Y-axis: 15 m/min, rapid traverse Z-axis: 50 m/min, rotational speed (max.): 6,000 rpm, total height: 2,490 mm, total length: 6,910 mm, total width: 2,092 mm, workpiece weight (max.): 4 kg, type of input current: three-phase, torque: 170 Nm, overall weight: 9,000 kg, bar passage: 65 mm, chuck outer diameter: 160 mm, bar diameter (max.): 65 mm, Equipment: documentation/manual, rotational speed infinitely variable, For sale is an INDEX C200 CNC turning machine, manufactured in 2025, from our own machine stock. The machine was delivered and put into operation in 2025 and is in very good, like-new condition. The C200 features extensive equipment with a main and counter spindle, three tool turrets with powered tools, and Y-axes, making it particularly suitable for the economical series production of complex precision turned parts. Technical data / Equipment: - Manufacturer: INDEX - Model: C200 - Year of manufacture: 2025 - Machine No.: 10511079 - Main spindle D65 - Counter spindle D65 - Workpiece diameter: max. 65 mm - Main spindle speed: max. 6,000 rpm - Counter spindle speed: max. 6,000 rpm - 3 tool turrets - 14 stations per tool turret - Powered tools - Tool speed: max. 8,000 rpm - Y-axes on the tool turrets - C-axis on main and counter spindle - Tool monitoring and tool management - Coolant high-pressure supply - Coolant/filter system - Chip conveyor - Workpiece removal / portal extraction device - Interface for bar loader magazine UNIMAG4 - Electronic spindle for spindles and drive power - CE conformity - Rated power: 54 kW - Connection power: 65 kVA - Connection: 400 V / 50 Hz Current operating hours according to the machine control: - On time: approx. 4,077 h - Hydraulics: approx. 3,863 h - Spindle / drive running times according to the operating hour counter: S1 approx. 146 h / S2 approx. 1,396 h / S3 approx. 317 h / S4 approx. 1,846 h / S5 approx. 2,224 h The machine is currently located in our factory and can be inspected and demonstrated under power after prior arrangement. Tedpfx Apez Hmq Dodjd We would be happy to provide further detailed images, technical documentation, and an official offer with a detailed equipment list if you are seriously interested.

See details

Advertise here