2012 YCM NDV 102A
YCM NDV 102A

Year of construction

2012

Condition

Used

Location

Bristol

Show map

Machine data

Machine type:: 2012 YCM NDV 102A

Manufacturer:: YCM

Model:: NDV 102A

Year of construction:: 2012

Condition:: used

Price & Location

Location:: Bristol, UK

Call

Details about the offer

Listing ID:: A19009186

Reference number:: cmu/TBC

Update:: 24.04.2025

Description

Used 2011 YCM NDV102A Vertical Machining Centre. Supplied with 12,000 RPM Spindle, 30-station ATC, Swarf Conveyor, Coolant Equipment & Manual Set.

SPECIFICATION:

TRAVELS:

- X Axis: 1,020 mm
- Y Axis: 600 mm
- Z Axis: 600 mm
- Spindle Nose to Table (~ max): 700 mm
- Spindle Nose to Table (~ min): 100 mm

TABLE:

- Length: 1,120 mm
- Width: 650 mm
- T-Slot Width: 18 mm
Bljdpfx Aewfdzcohvod
- Number of Std T-Slots: 6
- Max Weight on Table (evenly distributed): 1,000 kgMachinery Resources International

SPINDLE:

- Max Rating: 15 kW (20 hp)
- Max Speed: 12,000 rpm
- Drive System: Direct Speed Belt Drive
- Taper: Big Plus BBT40
- Bearing Lubrication: Oil Injection
- Spindle Chiller

FEEDRATES:

- Rapid and Jog (Max.): 24 m/min

AXIS MOTORS:

- Axis Motor Rating X/Y/Z: 2.29/2.29/3.3 kW

TOOL CHANGER:

- Type: Side mount
- Capacity: 30T
- Max Tool Diameter: 76 mm
- Tool Length Max.: 300 mm
- Tool Weight Max.: 6 kg
- Tool Change Time: 2.5 sec

GENERAL:

- Air Required: 78.2 psi/min
- Power Supply: 400 V / 3 Phase
- Coolant Capacity: 360 L
- Machine weight 7,000kg
Control: Heidenhain TNC i530
Spec: Travel X1020 Y600 Z600 mm | 12000RPM | BBT40
Accessories: Through spindle coolant, hi torque spindle motor, 30 tool side mount ATC

Seller

Registered since: 2022

11 listings online

Call

Send inquiry

Telephone & Fax

+44 117 3... show

These listings may also fit your interest.

Listing

Tool Room Milling Machine - Universal HERMLE C 600 V

Malsch

18,657 km

Tool Room Milling Machine - Universal
HERMLEC 600 V

Call

Condition: good (used), Year of construction: 1997, x-travel 600 mm y-travel 450 mm z-travel 400 mm Control Heidenhain 430 ITNC Bodpswbi A Dsfx Ahvold tool taper SK 40 voltage 400 V control voltage 24 V weight of the machine ca. 6 t - Operating hours: 48,690 - Max. table load: 1,000 kg - Machine weight: 6,000 kg - Includes tool holders – SK40 - Includes all descriptions - Includes programming manual – Heidenhain - Includes 1 machine vice - Includes clamping claws

See details

Listing

Machining Center - Vertical SPINNER VC750

Germany

18,260 km

Machining Center - Vertical
SPINNERVC750

Call

Condition: used, Year of construction: 2013, Technical details: x-travel: 760 mm y-travel: 460 mm z-travel: 460 mm control: Heidenhain TNC 620 switched on hours: 20246 h spindle hours: 7724 h number of spindle speeds: 12.000 U/min. max. torque on the spindle: 75 - 95 Nm spindle taper MT: SK40 tool changer with: 24 Plätze table-size: 900 x 410 mm max. table load: 350 kg feed range: k.A. rapid traverse:: 36 m/min interface: RS232 control voltage: 24 DC V air-pressure connection: 6 / 8 bar total power requirement: 20 kVA Weight approx.: ca. 6,0 t Blsdpfx Ahjvhbpdovsd dimension coolant device: 1,7 x 0,7 x 1,35 m dimension machine xH: 1,9 x 2,3 x 2,45 m TNC620 (contouring control with up to 5 controlled axes, particularly suitable for universal milling), can be integrated into the network Safety doors with impact-resistant plastic window panes Chip conveyor Hydraulic unit Coolant preparation system Rittal cooling system on the control cabinet Work area Interior lighting *

See details

Listing

3-axis vertical machining center Okuma MILLAC 852V

Cuggiono

18,798 km

3-axis vertical machining center
OkumaMILLAC 852V

Call

Condition: excellent (used), Year of construction: 2007, functionality: fully functional, input voltage: 400 V, travel distance X-axis: 2,050 mm, travel distance Y-axis: 850 mm, travel distance Z-axis: 750 mm, number of slots in tool magazine: 36, table length: 2,200 mm, table width: 850 mm, controller model: OKUMA-OSP-HMI, coolant supply: 15 bar, distance table center to spindle nose: 950 mm, spindle motor power: 22 W, number of spindles: 36, rapid traverse Z-axis: 16 m/min, rapid traverse X-axis: 16 m/min, rapid traverse Y-axis: 16 m/min, spindle nose: BT 50, spindle speed (max.): 10,000 rpm, spindle speed (min.): 50 rpm, table load: 2,500 kg, tool diameter: 120 mm, tool length: 400 mm, tool weight: 20 g, Equipment: documentation/manual, rotational speed infinitely variable, OKUMA-OSP-HMI 3-Axis Vertical Machining Center with CNC Bjdpou Dinkjfx Ahvsld

See details

Listing

Vertical machining center TOPPER TMV 510T

Beringen

18,712 km

Vertical machining center
TOPPERTMV 510T

Call

Listing

Daewoo (Doosan) ACE VC500 Daewoo (Doosan) ACE VC500

Gussago

18,696 km

Daewoo (Doosan) ACE VC500
Daewoo (Doosan)ACE VC500

Call

Condition: used, Vertical machining center Daewoo (Doosan) ACE VC500 The machine can be seen working in our warehouse in Gussago BS. Mimu Machine Tools Gussago BS Italy Vertical machining center - 2-pallet Daewoo ACE VC500 CNC Model Fanuc CNC version 18-M Spindle Taper toolholders iso 40 Power spindle 15 Kw RPM 10000 Number of tools 30 X-axis travel 760 mm Y-axis travel 510 mm Z-axis travel 570 mm Changer pallet yes Pallet dimensions 860x560 mm Maximum load allowed 300 Kg Bsdpetzgaqjfx Ahvjld Swing type pallet yes High coolant pressure yes Cheap conveyor yes Brand Daewoo Model ACE VC500 Construction year 2000 DIMENSIONS AND WEIGHT Length 3600 mm Width 3700 mm Height 2935 mm Weight 9200 Kg The machining center is a machine tool equipped with numerical control capable of performing multiple mechanical operations with a single set-up on multiple surfaces of the same work piece. It is generally equipped with multiple axes of motion and a automatic tool exchange system and sometimes multiple pallets CNC type: FANUC 18-M Number of pallets: 2

See details

Listing

USED CNC-LATHE MANUF. MAZAK, MODEL QTN 350 MY MAZAK QTN 350 MY

Denmark

18,026 km

USED CNC-LATHE MANUF. MAZAK, MODEL QTN 350 MY
MAZAKQTN 350 MY

Call

Condition: used, Year of construction: 2006, Turning length 1500 mm Max. turning dia. 420 mm Spindle bore 105 mm Spindle speeds 3300 rpm Spindle speeds on live tools 3000 rpm Turret w/12 stations Hydraulic tail stock Control: Mazatrol 640 T Nexus Equipped with: Magazine bar feeder FMB SL 80 3 pcs. live tools Various tool holders Blodox Nfwgjpfx Ahvod

See details

Listing

Lontzen

18,653 km

CNC lathe
HWACHEONHI-TECH 450 BL YMC

Call

Condition: excellent (used), Year of construction: 2017, Max. turning length: 1,214 mm Max. turning diameter: 420 mm Chuck size: 305 mm Max. swing over bed: 700 mm Travel distances - X-axis: 280 mm - Y-axis: 120 mm - Z-axis: 1,390 mm Rapid traverse - Rapid traverse X/Y/Z: 20 / 10 / 24 m/min Spindle - Bar capacity: 89 mm - Max. speed: 2,500 rpm - Drive power: 22 / 18.5 kW - Torque: 1,050 / 883.8 Nm Turret - Tool stations: 12 - Driven tool stations: 12 - Tool holder: BMT-65 Accessories: • Box ways • C-axis • Y-axis • Air blow gun • Steady rest base • Manual steady rest, manufacturer RICHTER • Chip conveyor • Automatic tailstock and quill Blodpfx Aew Tcvmshvod • Work light • Coolant tank capacity: 240 liters Connected load: 55 kVA Weight: approx. 7,800 kg

See details

Listing

CNC Vertical Machining Center DMG Mori DMC 650 V

Germany

18,384 km

CNC Vertical Machining Center
DMG MoriDMC 650 V

Call

Condition: ready for operation (used), Year of construction: 2014, A DMG Mori CNC vertical machining center including pallet handling Lang is available. 1) DMG Mori, year of manufacture: 2014, travel X/Y/Z: 650mm/520mm/475mm, rapid traverse: 36m/min, speed: 14000rpm, spindle power: 24kW/16kW, tool holder: HSK-A63, tool positions: 30, table dimensions X/Y: 900mm/570mm, machine dimensions X/Y/Z: approx. 3900mm/3400mm/2600mm, weight: approx. 6250kg, control: Heidenhain TNC 640, operating hours: 28250h, spindle hours: 13116h. 2) Automation system for pallets Lang Eco Compact 20, year of manufacture: 2018, pallet capacity: 20, loading arm reach: 1200mm, footprint X/Y: 2000mm/2000mm. The turntable on the doors is defective. Documentation available. On-site inspection is possible. Bedpfx Ajwpk Anjhveld

See details

Listing

Contamine-sur-Arve

18,946 km

Vertical machining center
BROTHERTC22A

Call

Condition: used, TECHNICAL DETAILS - Number of axes : 3 MILLING SPINDLE - Tool holder type : HSK40 - Spindle speeds : 12.000 [rpm] - Spindle power : 7,6 [kVA] LINEAR AXES - Travels on X/Y/Z axes : 500 / 410 / 610 [mm] TOOL CHANGER - Auto. Tool Changer type : Bras chargeur - Tool magazine capacity : 26 - Tool exchange time : 0.7 [sec] TABLE - Table dimensions : 650 x 400 [mm] - Maximum weight upon table : 200 [kg] POWER SUPPLY - Supply voltage : 220 [V] - Total installed power : 25 [kVA] Bjdpfx Ahouhbt Reveld WEIGHT & DIMENSIONS - Machine floor space : 1.640 x 2.100 [mm] - Machine height : 2.274 [mm] - Machine weight : 2.250 [kg] MACHINE HOURS - Number of working hours : 9070 [h] EQUIPMENT - CNC : BROTHER A00 - Electronic handwheel - Interface : RS232 - Workpiece probe : Renishaw OMP 60 - 4th axis : LEHMANN sans variateur - Chips conveyor - Coolant tank - Coolant through spindle : 70 [bars] - Oil mist extractor : AAF Astrosta - Electric transformer - Tool-holders : 42

See details

Listing