Clamping Units

WMW diverse

Condition: new, grinding range 2 - 20 mm Fsdpfxsupxkwj Alqsgb sharp cornered angle min./max. 90 - 135 Grad connected load 230 V weight of the machine ca. 8,6 Kg dimensions of the machine ca. 0,35 x 0,2 x 0,2 m

Condition: good (used), Year of construction: 2011, Ref. -No.: 10622 Manufacturer: BLANSKO Type: SKD 50 Year of construction: 2011 Type of control: CNC Control: SIEMENS SINUMERIK 840 D Storage location: Halberstadt Country of origin: Germany Z - stroke: 1950 mm Turning Height: 4130 mm Faceplate Diameter: 4770 mm Swing Diameter: 5300 mm Fsdpfx Aloym Nfzoqjgb Max. Load on the face plate: 100000 kg Traverse path of the crossbar: 3600 mm Adjustment speed of the crossbar: 500 mm / min Further information: Pickup magazine with 8 tool holder positions Automatic clamping of the tool holder in the ram 1x straight boring head 1x 90° angle head (not in the pickup magazine) 1x set of jaws The machine can be inspected under power.

Condition: good (used), Year of construction: 2000, Equipment: documentation/manual, LATHE TORNADO COLCHESTER 200 CNC FANUC GE Series DIAM. AUTOCENTRATING MANDRIN : 250 mm Fsdpfx Aletuut Uoqsgb CORSE : X : 215 mm Z : 400 mm TOOL MAGAZINE : 12 POSITIONS INCLUDING VARIOUS TOOL HOLDERS AND TOOLS BAR WIDTH : 65 mm TAILSTOCK IN CYCLE CHIP EVACUATOR INCLUDING ALL DOCUMENTATION

Condition: good (used), Year of construction: 2011, Müga TT - 42, Year of manufacture 2011, Mitsubishi M 700 control, Bar machining up to 42 mm, Sub-spindle, 2 turrets, B-axis: 0.001°, C-axis: 0.001°, Y-axis: 0.001°, Swivel head B-axis: +50°/-140°, Driven tools, Workpiece catcher, Workpiece conveyor belt, Chip conveyor, 2 collet chucks, Short bar loader Müga DH 65 L/1.5 m, Intelligent manual pulse generator (MPG), Reduction tubes. Main spindle X Y Z-axis 20 stations, 6 driven; Sub-spindle Y-axis 22 stations, 6 driven. Bar capacity: 42 mm Spindle power: 7.5 kW Spindle speed: 4,000 rpm Equipment: - 2 turrets Fgjdpfx Alexpulkoqob - Driven tools - Workpiece catcher - Workpiece conveyor belt - Chip conveyor - Intelligent MPG Reduction tubes Accessories

Year of construction: 1990, condition: excellent (used), used T-slot clamping angle Technical data: Dimensions height 1120 mm width 320 mm Groove width 20 mm with - 7 horizontal T-slots Fodpfx Ajgwxmxolqsgb used, in good condition

Condition: excellent (used), Year of construction: 1996, spindle bore: 160 mm, Swing over bed Ø 1040 mm Swing over cross slide Ø 710 mm Swing in the gap Ø 1580 mm DBC Turning Length 3000/4500 mm Fedpfx Aloxtbf Eoqogb Gap length 1500 mm Spindle bore 160 mm Spindle power 40 kW Bed width 800 mm Spindle taper 6 Mk Workpiece weight 3500 Speeds / ranges 800 Rpm Feed rate X-Axis 10000 mm/min. Feed rate Z-Axis 10000 mm/min. Please Note: The information on this page has been obtained to the best of our ability and belief, and from the manufacturers where possible. It is given in good faith, but its accuracy can not be guaranteed. Accordingly, it will not form a representation or constitute contractual terms. We advise you to check any vital details!

Condition: new, Year of construction: 2023, Manipulator with hydraulic height adjustment, faceplate with clamping slots and manual remote control. Height (faceplate horizontal): approx. 670 - 2,400mm Swivel range of face plate: approx. +-360°. face plate dimensions: Ø1.200mm x 40mm, 6x clamping slots Fgedpfxenqzt Ae Alqob Rotational speed of main axis: approx. 2.0 rpm (other Torque main rotary axis: approx. 13.000 Nm Speed of face plate: approx. 0.2-2rpm Torque face plate: approx. 10.000 Nm

Condition: used, Year of construction: 1979, Technical details: grinding diameter min/max: Aufnahme: Ø 200 x 32 mm number of spindle speeds: 3000 U/min total power requirement: ca. 1,2 kW weight of the machine ca.: 0,24 t dimension machine xH: 0,7 x 0,9 x 1,6 m The grinding spindle is equipped with two hand levers: Working range left = hand grinding device for small shank drills, grinding wheel currently Ø 120 x 30mm; admission=Ø 32mm; speed 3000 rpm.; with grinding support Working range right = swiveling device for conical shank drill; cup grinding wheel currently Ø 160 x 30mm; admission=Ø 32mm; speed 3000 rpm. Cutting angle max 180° for double-edged and 120° for triple-edged Clearance angle 5° - 9°; drill-Ø 8 - 40mm, possible grinding modes e.g.: normal grinding, DK-grinding, center grinding, spiral grinding, step drill grinding Machine illumination available * Fgodpfx Aeu Ng Ncelqsb

Condition: good (used), Year of construction: 1976, Centre lathe ZERBST - DPS 1800 MACH-ID 581 Make: ZERBST Type: DPS 1800 Year: 1976 Swing over bed Ø 1600 mm Swing over cross slide Ø 1250 mm Swing in the gap Ø 2100 mm Bed width 1400 mm Power 35 kW Speeds / ranges 180 Rpm Fgodpfx Aljwvir Ieqsb

Condition: good (used), Clamping plate with T-slots and cross table, plate field, welding table, welding table, plate boring machine, T-slot plate, pallet changer -T-slot plate: clamping plate -Width: 1000 mm -Total length: 7060 mm, clamping area 6260 mm -Plate height: 235 mm -Groove width: 22 mm -Groove spacing: 125 mm -Dimensions: see drawing in the photos -Transport dimensions: 7060/1000/H235 mm Fsdpsgvm D Hefx Alqsgb