Wide belt sander

WINTER SANDOMAT RP-630 SHORT DELUXE

Condition: used, Year of construction: 2004, 10 spindle system. Connected load: 380/400V/50Hz, 34 kW. Ijdpfjwynzcox Abxotg Glass thickness: 3-60 mm.

Condition: like new (used), Year of construction: 2022, functionality: fully functional, HOMAG Sandteq w-300 Technical Data: - Feed belt speed: 2.5 - 13 m/min - Working height: 900 mm - Working width: 1350 mm - Number of processing units: 2 - Workpiece thickness: 3 - 160 mm with automatic measurement - Machine dimensions (LxWxH): approx. 2115 x 2100 x 2415 mm - Machine weight: approx. 4000 kg - Total electrical power: approx. 39 kW - Recommended main fuse: 80 A - Vacuum table - Q = Cross sanding unit Poly V-belt / 13.5 kW (2-16 m/s) - X = Combination unit with contact roller & pressure beam system / 18.5 kW (2-18 m/s) - Super-finish function: calibration, veneer & intermediate lacquer sanding, veneer & fine lacquer sanding - Brushing unit - Cleaning rotator with ionization - Powercontrol with Powertouch The machine is available immediately. Loading onto truck possible. Ijdpfx Aoxczmzjbxotg

Condition: used, No. 3176 Automatic planer and moulder WEINIG Hydromat 1000 Used, year of construction 2007 6 spindles: bottom-right-left-top-top-bottom Electronic feed 6 - 60 m/min Working width 80 - 150 mm Working height 23 - 65 mm Finished slat widths 4 - 15 mm Max. Max. number of slats 16 pieces Slat lengths 400 - 4000 mm 1st spindle horizontal at the bottom Brake motor 11 kW, 6000 rpm Spindle diameter 45 mm Tool flight circle 125 - 180 mm 2nd spindle vertical right Brake motor 7.5 kW, 6000 rpm Diameter 45 mm Tool flight circle 112 - 250 mm Max. Moulding depth 35 mm Axial adjustment travel 80 mm 3. spindle vertical left 7.5 kW, 6000 rpm Diameter 45 mm Tool flight circle 112 - 250 mm Max. Moulding depth 35 mm Axial adjustment travel 80 mm Pressure shoe in front of the spindle, swiveling away, pneumatic roller contact pressure Itodpfx Aju Agh Sjbxog 4. spindle horizontal top 15 kW, 6000 rpm, diameter 45 mm Tool flight circle 112 - 250 mm Max. Moulding depth 35 mm Axial adjustment path 45 mm Split pressure shoe in front of upper spindle, adjustable and swiveling away, pneumatic 5. horizontal top spindle as saw spindle Brake motor 37 kW, 5000 rpm Diameter 45 mm Axial adjustment travel reduced to 25 mm Tool flight circle 112 - 250 mm Max. Sawing depth 35 mm Axial adjustment path 45 mm Split pressure shoe in front of upper spindle, adjustable and swiveling away, pneumatic 6. horizontal spindle at the bottom as saw spindle Brake motor 30 kW, 5000 rpm Axial adjustment travel reduced to 25 mm Diameter 45 mm Tool flight circle 112 - 250 mm Max. Sawing depth 35 mm Axial adjustment path 45 mm All moulder spindles with high-performance bearings Electronic feed 7.5 kW Adjustment travel of the feed rollers compared to the left-hand spindle, axial 35 mm Shorter roller distance compared to the right-hand spindles Running meter counter, electric, with 2 counters Short infeed table (1.2 m) with 2 driven rollers above the table 1 driven, toothed roller in the table, lateral pressure roller Automatic waxilite pump / lubricant pump Machine with 4-roller extension, pendulum shafts extended to 200 mm 2 driven, toothed rollers in the outfeed table 2 driven, toothed rollers in the machine table Pressure beam before and after upper spindle with mechanical digital display DigiSet (digital double display) for left and top spindles Electrical height adjustment of the upper spindles and the feed Machine already dismantled and stored Sale on behalf of customer, ex location near South Tyrol, without transportation and assembly Subject to errors in the description and price Transportation and loading by us optionally possible To avoid possible misunderstandings, an on-site inspection by appointment is possible and recommended Sold as is Technical details, condition description, year of construction and scope of delivery according to manufacturer's brochure or previous owner, without guarantee Subject to prior sale For used machines, any warranty is excluded, the following applies: “purchased as seen” Images and videos serve as examples and do not represent the actual scope of delivery Terms of payment: Prices plus VAT, payment before collection or dispatch Terms of delivery: ex location

Year of construction: 2014, condition: ready for operation (used), Max. output: 370kg/h, connected load: 0.25kW, length: 950mm, width: 950mm, height: 1115mm, weight: 75kg, including automatic filling, frame, valve, inspection shaft and documentation. Itsdpfx Ajh Akm Tebxog

Condition: excellent (used), Year of construction: 2021, Traverses X Y Z: 508 x 406 x 356mm, Table 1016 x 353mm, Itjdsyw R Hpjpfx Abxjg Spindle taper BT40, 20Hp spindle motor, Spindle Speed 10000rpm, HAAS Control, 20 Station ATC, coolant.

Condition: excellent (used), Year of construction: 2021, Sawblade tiltable 45 ° Length of the rolling table ~ 1.400 mm cutting width ~ 840 mm Itjdpfx Absy Erygoxsg Motor output 7,3 kW Cutting height ~ 100 mm weight of the machine ca. ~ 500 kg Bench space and sliding table saw Felder type K 700 for precise longitudinal, cross and format cutting of solid wood, panel materials and similar materials. The machine combines the advantages of a compact bench saw with a sliding table and is ideal for joineries, furniture construction and interior fittings. It has a tilting saw blade and is equipped with a digital rip fence.

Condition: good (used), Year of construction: 1998, functionality: fully functional, ram adjustment: 40 mm, installation height: 2,400 mm, total width: 17,000 mm, table length: 400 mm, table width: 400 mm, pressing force: 25 t, stroke adjustment: 17 mm, working width: 200 mm, overall weight: 2,500 kg, year of last overhaul: 2023, power: 0.003 kW (0.00 HP), Make: MABU Model: 25 VPR. Made in Germany. Max. Pressure: 250 [kN] (25 [T]). Speed range: 80-400 [spm]. Completely rebuilded Dec. 2023 Year of manufacture: 1998. Operating modes: Manual, One-cycle and Automatic. Equipped with two hand start and foot-clamp start. Fixed stroke: 17 [mm]. Ram adjustment: 40 [mm]. Max. Tool dimensions: 400 x 400 [mm]. Power: 3 [kw]. Current: 230 / 400 [V]. Air connection: 5.5 [bar]. Feeder: Silicon SFS 200 on left-hand side. Max. strip width: 200 [mm]. Machine dimensions: H 2350 x W 1700 x D 1400 [mm]. Weight of machine: cca. 2500 [kg]. Electrical cabinet with Mabu Pf 1.3 control. Front and rear safety guards with inspection glass. Technical documentation and operating instructions in English and German included. Iodpfx Aoq Ikhpjbxetg CE certificate and EUR-1 certificate of origin. On stock, tested and ready for delivery. More used machines from Mabu, Bruderer, Bihler and Schaal available on our stock for sale.

Condition: used, Number of sanding units 4 St sanding width 190 mm Isdpfx Abet Tqy Eexstg Sanding height max. 4-180 mm weight 4200 kg Hess Expert 4-belt single wood sanding machine machine will be checked by our technicians ----- Ø Grinding at the bottom/top Ø With 2 offset grinding units each (bottom and top) Ø Grinding units (bottom and top) connected in series according to the Dressing principle Ø Pre-sanding with coarse grit (calibrate) Ø Regrinding with fine grit (finish) Ø Central motorized height adjustment of the lower grinding units Ø Central motorized and synchronous height adjustment of the entire upper Grinding and brushing units including the upper transport units Ø Oscillating sanding belt utilization (during the sanding process) Ø Absolute power connection thanks to 5.5 KW motors and large dimensions drive drums Ø Oxide ceramic grinding shoe for - exact surface geometry - no adjustment work - permanent dimensional accuracy - completely maintenance and wear-free Basic structure: Stable, heavy welded construction made of strong-walled rectangular profiles additional, statically calculated reinforcements for optimal Vibration dampening. Staggered grinding units with large dimensions Belt drive drums for slip-free belt running. Two-point suction for direct and flying dust with sealing brushes and integrated sanding belt blow-off Device to increase the service life of the sanding belts. Grinding units in heavy steel plate construction as the basis for vibration-damped, quiet tape running. Absolutely backlash-free guides as ball linear sets hardened and ground shafts. Height adjustment of the grinding units via hardened and ground special linear guides as well as pre-tensioned ones Guide carriage. Permanent precision thanks to dust and dirt protection Ball linear sets and guide carriages. Large-sized pre-grinding rollers as contact rollers. Contact rollers and Sanding shoes in a balanced ratio to the sanding belt grain load. The large drive drums guarantee full transmission the 5.5 kW drive power of the grinding motors on the sanding belt. Therefore Slip-free, stable running and optimal heat dissipation. This makes it the strongest Chip removal possible. Automatic machine stop activation in the event of a belt break. Visual display on the control panel and via flashing lights on the machine. Sanding shoes for finish completely maintenance-free and wear-free made of oxide ceramic with optimal heat dissipation. Grinding belt tension via appropriately sized compression springs. Sanding belt relaxation for belt changing using a pneumatic device sensitive, distortion-free placement of new tapes. Upper grinding unit and brush device centrally motorized Height adjustable with digital display in the control panel for the motorized Grinding thickness adjustment. Brushing and finishing device, for better surface finish, integrated into the basic machine. Two special brush rollers 150 mm Æ arranged one above the other in synchronous function for advance thrust. Separate height adjustment of the brush rollers on precise Carriage guides for post-correction of wear. Additional transport roller for Removal or further transport of the workpiece from the automatic grinding machine with the conveyor belt. Wooden guide in the inlet area for hard guide and bearings mounted on both sides pressure rollers. Safe transport of profiled workpieces on ca...

Condition: new, Year of construction: 2026, CORMAK C2030 CNC milling machine is intended for machining and cutting wooden materials, particleboards, MDF, OSB, plywood, plastics, PVC, acrylic glass. Device mainly designed for usage in furniture and modelling industries. 2100×3100 mm working table. Itsdpfx Abeiz A Rqexsg The price is a net price. Price does not include shipping costs. For more information, please contact us by phone or e-mail. Check our offer on our website.

Condition: good (used), Year of construction: 1988, pressure 15 t throat 180 mm stroke 6 - 60 mm no. of strokes 145 Hub/min ram adjustment 40 mm table surface area 400 x 270 mm hole in the table 100 mm ram surface 120 x 100 mm dayligth 250 mm total power requirement 1,1 kW Ijdpfjt Tqglex Abxotg weight of the machine ca. 1150 kg dimensions of the machine ca. 0,96 x 1,34 x 1,88 m