Double Edger

WINTER DOUBLECUTMAX 450

Year of construction: 2011, condition: ready for operation (used), A Gross Apparatebau GmbH shredder, which was used in the wood industry, is available. Feed opening X/Y: 600mm/800mm, hopper volume: 0.6m³, rotor diameter: 252mm, rotor length: 600mm, rotor speed: 90rpm, drive power: 18.5kW, number of knives: 14, screen perforation: 10mm-40mm, suction nozzle diameter: 160mm, machine dimensions X/Y/Z: approx. 1800mm/1200mm/1650mm, weight: approx. 1300kg, operating hours: 4578h. Documentation available. On-site inspection is possible. Lredpfx Apju Nlkxjvjl

Condition: used, functionality: fully functional, For sale on behalf of a customer. Completely overhauled and supplied by us in 2008, in operation until 2024. Factory-new AirTen rotor, used only for a short period. Includes various spare parts and complete documentation. Includes infeed and outfeed conveyor as well as frame. Lrjdjxnz Rkepfx Apvsl

Condition: like new (used), Socolest DAS 200 twin-shaft multiblade feeding and receiving table - Made in Italy - centering feeding table - discharge receiving table - top drawing rollers TECHNICAL PARAMETERS: - cutting height 200 mm - cutting width 400 mm - engine power 2 x 55 kW - track width 630 mm Lrjdpfx Apsqup Anevjl - disc diameter max 350 mm - feed speed 40 m / min - hydraulic roller height adjustment - hydraulic cutting height adjustment - hydraulic feed - four top pulling rollers - four rows of anti-rejection latches - shaft diameter 70 mm - sleeve diameter 90 mm - pneumatic side pressure centering - diameter of ferrules 2 x 250 mm - minimum workpiece length 720 mm - laser - feeding table belt 5700 mm - width of table 600 mm - top roller pneumatic pressure roller - speed of table regulated on inverter - receiving table 9200 mm - width of rollers 800 mm - diameter of rollers 135 mm - four drop chains - distance between chains 1900 mm Transport dimensions 1300 cm x 240 cm x 200 cm weight 8 t

Condition: new, Year of construction: 2025, functionality: fully functional, Type: MN 7.0 FL100 Nominal width: 100mm Basic sensitivity: FE: 0,6mm; NFE: 0,8mm; SUS: 1,2mm Frequency: Hoch Lrodpom E U Umofx Apvol Year of construction: 2017 Specific features: new device Typ: Digital 2 VA100 Nominal diameter: 100mm Basic sensitivity: FE: 0,6mm; NFE:0,8mm; SUS:1,2mm Frequency: high Year of manufacture: New device Special features: Compact design with integrated automatic ejection system and funnel pipe diameter: 100mm

Condition: new, Year of construction: 2008, functionality: fully functional, machine/vehicle number: 2008-176, The Cambio 500 is a debarker for small logs up to 495 mm (20 inches) in diameter. It operates at feed speeds of up to 120 m/min (393 ft/min). Thanks to its reliability, minimal maintenance requirements, and ultra-low operating costs, the Cambio 500 is the first choice for leading wood processing companies worldwide. Its triangular feed system and carbide-tipped debarking tools, powered by compressed air, are among the key features that ensure superior debarking results. Complete with a feed conveyor. The machine was not in operation and was in storage. Lodpfx Apsyl Aqhjvjrl

Condition: as good as new (ex-display), Year of construction: 2026, S&F drum chipper type ATH 220x530/3 Demonstration machine / trade fair machine / new machine Solid design with long service life Feed height: 200 mm Feed width: 500 mm Number of chipper knives: 2 pieces Number of counter knives: 1 piece Rotor diameter: 520 mm (solid steel rotor) Number of feed rollers: 3 pieces Throughput rate: up to approx. 20 rm/h * Chipping length: approx. 30 mm Chipper drive power: 45 kW or on request Feed roller drive power: 2 x 2.2 kW Operating/control voltage:400/220 V, 50 Hz Weight: 2,600 kg *depending on chipper length, kW main motor, number of knives, feed Lsdpfx Apsw I R Rneverl S&F chippers and drum chippers with horizontal infeed are used in many areas of the wood processing industry (sawmills, timber mills). Chippers from the ‘ATH’ series produce high-quality and homogeneous wood chips with a low proportion of fines from residual wood, for example as quality chips for the cellulose industry or as fuel chips for energy generation Advantages: - Maximum throughput - Low fines content - Low maintenance - Flexible use - Customised production

Condition: used, Valon Kone VK450 with infeed conveyor. Lsdsvt S R Aepfx Apverl

Condition: ready for operation (used), Semi automatic sorting line with 1 waste pocket and two size pockets. Line is equipped with metal detector Mesutronic. Sorting process is controlled by operator. Fully working line with hydraulic station and electrical cabinet included. Video of working process available by request. Working diameters 100-500 mm Lrsdpfev Nwrwsx Apvjl

Condition: ready for operation (used), Year of construction: 2015, Weinig Powermat 700 6x 40mm Spindles. CNC on spindles 3, 4 and 5. Width 20-230mm Height 10-160mm Memory system Automatic lubrication system for bedplates. No 1.  11kW - Bottom 7000rpm No 2. 7.5kW - Right 7000rpm No 3. 7.5kW - Left 7000rpm No 4. 15kW - Top 7000rpm No 5 . 11kW - Top 7000rpm No 6 . 11kW - Bottom 7000rpm Electronically variable feed. 40m/min Lrjdpjyub Nnefx Apvsl Short infeed table. Marathon coating for machine bed plates. Manuals & hand tools.

Condition: reconditioned (used), functionality: fully functional, The VK550 two-rotor machine can be equipped with 480 mm or 620 mm rotors (alternatively, one rotor can be a reducer). It comes complete with a feeding conveyor and a hydraulic power unit. The debarker has been fully refurbished by our workshop and is in excellent working condition. Lodpfewfp Saox Apvsrl