Formier

Weinig Uniplan

Condition: reconditioned (used), Number of spindles 8 St. Working width 230 mm Working height 120 mm Weinig Planing and moulding line ----- Consisting of the following individual machines: Hfodpfx Agoxpn Tustsl Item 1: Weinig Profimat 23 E, four-side planer, stock number: 2803 5 spindles + glazing bead saw Item 2: Weinig Uniplan 23, stock number: 2804 Fine and hydroplaner with 2 horizontal spindles Item 3: Weinig RF 15, stock number: 2805 Longitudinal-cross-longitudinal conveyor with workpiece return to the operator Detailed descriptions of the machines can be found under the mentioned stock numbers. (Technical specifications according to the manufacturer, without guarantee!)

Condition: excellent (used), functionality: fully functional, Saw dust extraction unit SCHUKO STA 5.5 kW Width: 2200 mm Height: 3600 mm Depth: 1100 mm Bag length: 200 cm Filter sleeve diameter: 140 mm Hfjdpfx Agsx I N A Dotjl Number of filter sleeves: 54 pcs Collection bags: 3 pcs Collection bag diameter: 500 mm Suction port: 250 mm Main motor power: 5.5 kW Filter bag shaking system Extraction pipes included

Condition: reconditioned (used), Working width 230 mm Working height 15-120 mm Number of spindles 2 St. Weinig Hydro Planer Type Uniplan 23 ----- Machine was factory overhauled by Weinig in 2024. Description: For two-sided horizontal woodworking with two working spindles. Spindle arrangement: horizontal, bottom and top. The two horizontal spindles are equipped with hydraulically tensioned counterbearings without axial adjustment. Built-in straight jointers on both spindles with automatic stone feed, remotely controlled with the hood closed. Machine with continuous, chainless feed, equipped with rubber rollers. Electric up/down adjustment of the spindles according to a mechanical digital display (SIKO). On/off switch for limiting the up/down adjustment. Feed roller pressure pneumatic. Stops and table tops are not adjustable. Machine with steel table tops. Machine with full enclosure and integrated sound and dust protection including interior lighting. Electrical design according to DIN VDE 0113, electrical equipment of industrial machines EN 60204, IEC - 204 - 1. Other electrical regulations are not taken into account. Machine includes operating tools, but does not include machining tools. The Weinig Uniplan spindles operate at a speed of 7200 revolutions per minute. Before using existing tools, please check that they are suitable for the speed. Please also consider this when Hfjdjxpn Tzjpfx Agtjl ordering new tools. Technical specifications Max. working width: 230 mm Min. working height: 15 mm, max.: 120 mm Feed: 3 kW (4 HP) Horizontal spindles each: 7.5 kW (7.5 HP) Infinitely variable feed speed: 6 - 36 m/min. Spindle speed: 7,200 rpm Spindle diameter: 50 mm Tool clamping length: 240 mm Maximum tool radius: 163 mm Fixed clamping clearance at bottom: 0.5 mm (Technical data according to the manufacturer - no guarantee!)

Condition: used, Weinig Unimat 23 E + Uniplan 23 planing line, including a return conveyor. An NC-controlled line for planing and profiling window scantlings, including glazing bead cutting or other planing tasks, with automatic return of the workpieces to the operator. Technical data: Hsdpozrxzusfx Agtjfl - Spindles: 4 + 2 - Working width: 230 mm - Working height: 120 mm - Spindle 1: 7.5 kW / 50 mm / 8,000 rpm - Spindle 2: 11 kW / 50 mm / 8,000 rpm - Spindle 3: Shared motor with spindle 2 / 50 mm / 8,000 rpm - Spindle 4: 7.5 kW / 50 mm / 8,000 rpm - Spindle 1 Uniplan: 5.5 kW / 50 mm / 7,200 rpm - Spindle 2 Uniplan: 5.5 kW / 50 mm / 7,200 rpm - Feed rate: 5–24 m/min - Control: Nexus PC control system - NC axes: Unimat 2 & 3, Uniplan 1

Condition: used, Year of construction: 2006, functionality: limited functionality, machine/vehicle number: 0084603, workpiece width (max.): 300 mm, Equipment: double-sided, VG FANTASTIC 300 SANDER CALIBRATION VG MACHINES MODEL DOUBLE-SIDED Hsdpfx Agjxiycujtsfl FANTASTIC F/G 300 - 3KKS/3KKS - Working width: 300 mm - Total installed power: 37 kW - Configuration: RRT/RRT (lower roller + upper roller) - Motors: 2x (7.5 + 7.5 + 7.5) Belt width: 1900 x 300 mm

Condition: used, Weinig Uniplan 23 hydro-planer for double-sided surface finishing, as an alternative to sanding (e.g. in window manufacturing), featuring high-performance spindles. Jointer Idler bearing Short parts pack In very good original condition Technical data: - Spindles: 2 - Spindle configuration: Bottom (7.5 kW) – Top (7.5 kW) - Working width: 230 mm - Working height: 120 mm - Spindle diameter: 50 mm - Feed: 3 kW // max. 36 m/min Hfsdpfx Agezrxydstsl - Spindle speed: 7,200 rpm

Condition: used, Second-hand Weinig Uniplan control cabinet, suitable as a source of spare parts or for building a new control cabinet with an operating panel. Available: No. 1 and No. 2 Hsdpfxozrxtdo Agtjfl

Condition: new, Year of construction: 2025, Dimensions (L/W/H) 1050x850x1300 mm Weight 420 kg Hfodpfx Agsvz Hfqjtel Total power requirement 4,5 kw

Year of construction: 1995, condition: good (used), planing width 220 mm planing height 140 mm Hfodpfx Agsg E Uqcotol tool diameter max 160 mm 2 x 5.5 kW main engines 3 kW feed motor feed speed 6 - 36 m / min - on the inverter feed on cardan shafts heads supported on both sides electric height adjustment

Condition: excellent (used), Year of construction: 2004, Weinig Hydro fine planing machine, Uniplan 23 Hfjdpozg Euqsfx Agtjl Year of manufacture: 2004 Working width: 230 mm Working height: 120 mm 1st spindle, bottom: 7.5 kW 2nd spindle, top: 7.5 kW

Condition: excellent (used), Year of construction: 2015, operating hours: 1,000 h, functionality: fully functional, machine/vehicle number: DB504402A, working height: 880 mm, working width: 1,300 mm, feed rate X-axis: 20 m/min, height adjustment type: electric, workpiece height (max.): 80 mm, total height: 940 mm, type of input current: three-phase, overall weight: 2,400 kg, Holmelt glue applicator by Sorbini, very lightly used, approx. 600 operating hours Hfodoy Ed Ucepfx Agtsl