Four side moulder

Weinig Unimat 500

Condition: ready for operation (used), Year of construction: 2006, functionality: fully functional, machine/vehicle number: 107402, spindle diameter: 40 mm, number of spindles: 4, Equipment: CE marking, TECHNICAL DETAILS Number of spindles: 4 pcs. Spindle diameter: 40 mm Infeed table length: 1,780 mm MACHINE DETAILS Dimensions (L x W x H): 2,170 x 4,600 x 1,830 mm Feed motor: 5.2 kW Feed drive: Cardan shaft drive Extraction nozzle diameter: 140 mm Voltage: 400 V EQUIPMENT Nwedoxw R Rljpfx Adhep CE marking Note: The machine’s bearings are in poor condition.

Condition: reconditioned (used), Year of construction: 2010, functionality: fully functional, machine/vehicle number: IRB6640-235/2.55 IRC5, load capacity: 235 kg, arm reach: 2,550 mm, controller manufacturer: ABB, controller model: IRC5, teach pendant manufacturer: ABB, Equipment: documentation/manual, IRS Robotics® Refurbished industrial robot Includes our warranty and a detailed 77-point protocol evaluation performed by our in-house robotics engineers. Brand: ABB Type: IRB6640-235/2.55 Controller: IRC5 Payload: 235 kg Reach: 2.55 m General purpose: Heavier Payload Floor Mounted Robot mass: approx. 1400 kg Optional: We can deliver the robot with an ABB IRBT6004 track (up to 32 meters if needed). Complete with 7th axis drive unit in the robot controller, motor, cable chain, grease pump – fully functional and running. IRS Robotics® refurbished: Nedpfep T Uz Esx Adhjwp 77-Point Protocol – fully tested on our test benches, new oil/grease, new batteries, fully cleaned, painted in your desired RAL colour. Includes Accuracy Status Measurements (repeatability, accuracy, backlash) About: Our daily trustful business is delivery of refurbished A-Brand robots: ABB – KUKA – ABB – YASKAWA. Est. 2002. We ship worldwide.

Condition: excellent (used), functionality: fully functional, input voltage: 400 V, tool diameter: 140 mm, warranty duration: 3 months, shaft diameter: 40 mm, number of spindles: 5, extraction connection diameter: 140 mm, input frequency: 50 Hz, feed roller diameter: 140 mm, table width: 230 mm, blade shaft diameter: 40 mm, Equipment: cabin, motor brake, Weinig Unimat 500 four-sided planer Nwedpsv Nkufjfx Adhop Working width 230mm Working height 130mm Number of spindles 5 Spindle arrangement: 1. Bottom 7.5kw 2. Right 3. Left 11kw 4. Top 7.5kw 5. Bottom 5.5kw Powercom system Pneumatic clamps divided into 4 sections Feed speed regulated by means of an inverter Feed drive on cardans Infeed table length 1970mm CE certificate

Condition: excellent (used), Year of construction: 2008, Weinig Unimat 500 Year of manufacture: 2008 Planing width: 260 mm Planing height: 120 mm Infeed table length: 2,500 mm Nwedpfoxdm Tvox Adhep Feed speed: 5 - 30 m/min Feed motor: 4 kW Automatic positioning of the left and top spindle Spindle positions: Bottom 7.5 kW Right ) Left ) 11 kW Top 11 kW Bottom 7.5 kW

Year of construction: 2018, condition: excellent (used), For machining aluminium and steel profiles Fully functional, in very good condition Year of manufacture: 2018 Machining length: 7,200 mm 3-axis control with 15" monitor Tool changer: 8 positions / turret 8 pneumatic horizontal material clamps Autonomous clamp positioning Two separate work zones, suitable for pendulum operation 2 pneumatic material stops Nwedewynitspfx Adhsp 8 tool positions / BT30 turret Barcode scanner Handheld control unit Safety light curtain at the front and lateral safety fence Minimum quantity lubrication system Centralised lubrication system Thread cutting without compensating chuck Easy programming via hand control unit High-speed spindle up to 18,000 RPM Includes 3 angle heads X-Axis [mm]: up to 7,200 / 7,200 Y-Axis [mm]: up to 485 / 310 Z-Axis [mm]: up to 340 / 260 Traverse speed X/Y/Z-Axis [m/min]: 60/60/60 Max. milling cutter diameter: 25 mm Max. saw blade diameter: 180 mm Max. tool length: 200 mm (tool + holder) Max. spindle speed: 6,000 RPM Spindle power: 6 kW Weight: approx. 5.5 t Total operating hours: 30,844 h Total spindle hours: 11,583 h

Condition: used, Year of construction: 2005, Weinig Unimat 500 Moulding machine Description; Dimensions of the infeed table: 2500 mm Number of axes: 5 Spindle Sequence: Bottom-right-left-top-bottom Mobile spindle: No Planing width: 20 / 230 mm Planing height: 12 / 120 mm Throughput: 24m/min Groove bed: No Other comments:- (All changes, mistakes in technical data, info and prices reserved. Availability subject to prior sales. No guarantee on printed data!) (Alle Änderungen und Irrtümer in den technischen Daten, Angaben und Preisen sowie Zwischenverkauf vorbehalten! Keine Garantie auf gedruckte Daten!) Best woodworkingmachines from the Netherlands Holland Die besten holzbearbeitungsmaschinen aus die Niederlande De beste gebruikte machines uit Nederland Nedpfsw Ebacox Adhewp

Condition: excellent (used), Four-side planer WEINIG Unimat 500 Memory system control, 3 axes controlled from the operator panel (width, height, pressure roller positioning), Grooved table, cutterhead arrangement and motor power: bottom head 7.5 kW, right and left 11 kW each, top 11 kW, top 5.5 kW, and bottom 5.5 kW, max planing width 230 mm, max planing height 120 mm, spindles fully adjustable, spindle diameter 40 mm, feed via cardan shafts with stepless adjustment, central lubrication, Nedpfx Aew Dn I Rodhewp machine in original, very good condition. Everything works perfectly. Machine dimensions: length: 470 cm, width: 200 cm, height: 200 cm, weight approx. 3000 kg.

Condition: new, The Danish flower trolley with identical dimensions to the CC trolleys is used for transporting and storing seedlings and flowers. The Danish shelf is equipped with shelves with a load capacity of 100 kg each (with evenly distributed load). The shelves are adjustable in height every 5.5 cm. This makes it easy to adapt them to the size of the plants stored. The Dutch trolley is made of high-quality galvanised steel, while the shelves are made of waterproof plywood. All this makes our flower trolleys robust and highly functional. The offer concerns the base flower trolley + 3 shelves : - Model : MPP000652 - Height: 190 cm - Width: 135 cm - Depth: 56.5 cm Net price : € 80.00 each. This offer concerns an additional shelf for a flower trolley : - Model : MTP002923 - Height: 4 cm - Width: 130 cm - Depth: 55 cm Net price : €10.00 each. The offer concerns the flower trolley base + 2 shelves : - Model : MPP000651 - Height: 190 cm - Width: 135 cm - Depth: 56.5 cm Net price : 70.00 euro each. The offer is for a base+ 3 shelf tilting flower trolley : - Model : MPP000653 - Height: 172 cm - Width: 140 cm - Depth: 56 cm Net price : €145.00 each The Danish trolley is equipped with 5 inch castors are made of sturdy and durable polypropylene. The garden flower trolley has 2 swivel castors and 2 fixed castors, making it light to drive. The flower rack is made of galvanised stainless steel, which protects it from corrosion. This allows you to store cuttings and flowers both indoors and outdoors. An additional advantage is the waterproof plywood from which the shelf and base are made. Njdpfem Ux S Eox Adhswp * Transport throughout Europe possible. * The above offer does not include transport costs. * Location: Chmielów/Tarnobrzeg, Poland.

Condition: excellent (used), working width 230mm working height 120mm 6 heads heads set: bottom/right/left/top/top/bottom spindles diameter 40mm Memory System control Nodpfsw Afcvox Adhowp table lubrication spindles speed 6000 RPM

Condition: ready for operation (used), Technical characteristics Capacity : 230 x 120 mm Feeding speed 5-30 m/min 2500 mm infeed table Digital axis positioning 5 shafts : Lower shaft 7.5kW Njdpfxeuarxzj Adhewp Right left shapers 11kW Upper planer 11kW Lower planer 7,5kW Power and Motors Voltage: 400 V Pluging: Three-phased Power: 40 Kw Overall dimensions

Condition: ready for operation (used), total height: 3,020 mm, total length: 3,300 mm, total width: 5,100 mm, throat depth: 1,060 mm, zware dubbelkoloms lintzaag voor het zagen van hooggelegeerde staalsoorten automatische invoer van het werkstuk met automatische herpositionering CNC-gestuurde variabele snelheid voor invoer en zagen spaantransportband uitgerust met volledig gemotoriseerde Weisshaupt-rollenbanen: - 10,3 meter invoerrollenbaan (buiten) met 2 hydraulische klemmen voor de contouren van het werkstuk - 9 meter invoerrollenbaan (binnen) met 2 hydraulische klemmen voor de uitlijnen van het werkstuk - Maximale werkstukbreedte: 900 mm - elke rol is gemotoriseerd - de capaciteit van één rollenbaan is 4 ton - 4 meter uitvoerrollenbaan: één rollenbaan is uitgerust met een weegschaal om het werkstuk na het snijden te wegen (Sartorius-systeem) Max height of workpiece: 860 mm Sawspeed: 16 > 80 m/min Length of band saw: 10260 x 80 x 1,60 mm Power needed: 32 kW (100 amp) Weight: 9 ton (only machine) Nwedpfx Adsv Sfp Aehep

Condition: excellent (used), functionality: fully functional, feed length X-axis: 230 mm, feed length Y-axis: 140 mm, spindle speed (min.): 6,000 rpm, extraction nozzle diameter: 140 mm, planer shaft diameter: 40 mm, workpiece height (max.): 140 mm, compressed air connection: 120 bar, workpiece width (max.): 230 mm, input voltage: 400 V, warranty duration: 2 months, number of spindles: 5, feed roller diameter: 140 mm, table width: 230 mm, blade shaft diameter: 40 mm, Equipment: cabin, motor brake, Four-side planer Weinig Unimat 500 Working width: 230 mm Working height: 140 mm Number of spindles: 5 Spindle arrangement: Bottom: 5.5 kW Right Left: 7.5 kW Top: 11 kW Bottom: 5.5 kW Feed speed adjustable by inverter up to 30 m/min Feed motor: 4 kW Drive via cardan shafts Pneumatic hold-downs 3 axes controlled from the control panel (width, height, hold-down position) Air cushions in the worktable Infeed table length: 2470 mm CE certified Nwjdpswv Slkjfx Adhsp DTR documentation

Year of construction: 2005, condition: ready for operation (used), Additional Equipment Nwjdswkxd Aspfx Adhop Includes approx. 70 cutter heads Z4 Several hundred new serrated-back knife blanks This WEINIG Unimat 500 was manufactured in 2005. A robust woodworking machine featuring a working range of 230 x 120 mm and five spindles, it ensures efficient processing with variable feed speeds from 4 to 30 m/min. Spindle power outputs include 4 kW for infeed and outfeed, and 7.5 kW for right/left and top spindles. Consider the opportunity to buy this WEINIG Unimat 500 woodworking machine. Contact us for more information about this machine. Application Types Other Woodworking Machinery

Condition: excellent (used), Year of construction: 2016, operating hours: 1,395 h, functionality: fully functional, machine/vehicle number: 1400040877,  4-axis (X, Y, Z, A) center,  For economical and efficient machining of aluminum profiles and thin-walled steel profiles,  Version with air-cooled milling spindle,  All machining processes such as milling, drilling and threading take place on a stationary profile,  Smooth machining using all tools,  Simultaneous tool magazine ensures short tool change times and, as a result, optimal machining cycles,  Magazine can be equipped with eight tools,  Windows operating system  Machine equipped with eluCam program  Max. length of machining fields with front machining: 4200 mm  Max. length of machining fields without front machining: 4320 mm  Automatic length measurement on both sides,  Barcode reader,  Stationary tool magazine (8 slots), Nwodpfx Adouc U S Nohsp

Condition: excellent (used), Weinig Unimat 500 four-sided planer Working width 230mm Working height 140mm Number of spindles 6 Spindle arrangement: 1.Bottom 7.5kw 2.Right 7.5kw 3.Left 7.5kw 4.Top 11kw 5.Top 11kw 6.Bottom 7.kw Total power 56kw Feed speed adjustable on inverter Memory system Pneumatic pressure divided into 3 sections Nwjdpfjthk T Isx Adhsp 4 rows of metal material feed rollers 2 rows of rubber drawing rollers 1 roller in the tabletop driven by a cardan shaft Length of input table top 1980mm Worktops made with Marathon Coating technology CE certificate Extraction stubs 6x140mm Machine dimensions 394x185x195cmH