Multiblade

WEINIG Profirip KM310M

Condition: excellent (used), functionality: fully functional, Raimann ProfiRip KM310M Multi-blade Saw Chain width: 330 mm Maximum saw spacing: 310 mm Max. cutting height with movable saw (with pressure): 90 mm Max. cutting height with movable saw (without pressure): 105 mm Max/min saw blade diameter: 300/250 mm Passage width: up to 1000 mm Feed speed: up to 30 m/min Guedoyzxp Hjpfx Ankjb

Year of construction: 1998, condition: ready for operation (used), A Construzioni Macchine Legno s.r.l. multirip saw is available. Saw blade diameter min./max.: 250mm/360mm, saw blade inner diameter min./max.: 70mm/95mm, cutting width: 320mm, cutting height movable/rigid: 90mm/120mm, weight: approx. 3000kg. On-site inspection is possible. Guedpfx Anjwv Umwsksb

Condition: refurbished (used), Year of construction: 2012, operating hours: 8,000 h, functionality: fully functional, machine/vehicle number: 139640, 247 KW PART Nº: 4486-000005_AT PLAZO DE ENTREGA: 2 SEMANAS Gedpfx Anjmhf I Sskjub DELIVERY TIME: 2 WEEKS COMPLETLY REFURBISHED

Condition: good (used), Year of construction: 2000, Weinig High Mech E6 infeed + A5 outfeed + stacker 1. Weinig pack infeed roller conveyor. 2. Weing pack tilt Gjdpswgbw Rofx Anksub 3. Weinig flat chain cross feed conveyor with single board feeder. 4. Weinig reject sorting unit with roller tracks. 5. Weinig EM814 moulder infeed with flat chain feeder. 6. Weinig outfeed 3m belt accelerator conveyor. 7. Roller conveyor with cross feed chain kickers. 8. Weinig cross feed buffer belt conveyor. 9. Weinig flat chain stacker with scissors lift roller conveyor. 10. Weinig pack outfeed roller conveyors. Possible to offer with additional Weinig bundling system if needed.

Condition: used, Year of construction: 2001, - Manufacturer Barberan - Type BRB-1400 - year of construction 2001 - Working width 1330 mm - Working height ~ 880 - 900 mm - Part height ~ 5 - 100 mm - Operating side right - Lacquer application roller ~45 Shore Gedpfx Aeuyky Tjnkeub - Roller diameter 245 mm - Application cylinder speed 4 - 24 m/min - Quick-change system Application roller - Hard chrome-plated metering roller 174 mm - Dosing roller Speed 4 - 24 m/min - Reverse drive - Solvent-resistant conveyor belt - Double diaphragm pump - Travelling on flanged rollers without - Feed adjustable via frequency converter 5 - 25 m/min - Length: 980mm - Width: 2.800mm - Weight 1,680 kg - Volt, Hz 400 / 50 - Location, in stock - Machine has been overhauled in 2022

Condition: excellent (used), Four-side planer Weinig Hydromat 23C Working width: 230 mm Working height: 160 mm Number of spindles: 7 Spindle arrangement: 1. Bottom 15 kW 2. Right 7.5 kW 3. Left 7.5 kW 4. Top 15 kW 5. Bottom 30 kW (multi-blade saw) Godpfexlcufjx Ankoub 6. Bottom 7.5 kW (hydro support) 7. Top 7.5 kW (hydro support) Spindle speed: 6000 rpm Spindle diameter: 50 mm 4 feed rollers in the worktable Feed speed adjustable via frequency inverter up to 36 m/min Feed drive powered by cardan shaft Pneumatic pressure elements Technical documentation

Condition: like new (used), Weinig Hydromat H22N four-side planer - German production - DTR - year of production 1992 - two rollers in the tabletop, milled before the first head - for wet wood Guedpfx Aepvi Skonkjb TECHNICAL PARAMETERS: - planing width 220 mm - planing height 140 mm - spindle diameter 50 mm 1 lower head 7.5 kW 2 legal head 7.5 kW 3 left head 11 kW 4 upper head 7.5 kW 5 lower head 11 kW hydraulic feed pump motor power 15 kW feed speed smoothly adjustable up to 60 m/min feed on cardan shafts electric height adjustment pneumatic pressure five pulling rollers in the countertop eight steel upper pulling rollers one upper rubber pulling roller rests on horizontal spindles jointer on the lower spindles Transport dimensions 500x200x160 cm weight 4 tons

Condition: used, machine/vehicle number: 3281, - Producer Elmag Superfici - Working width 1300 mm - Number of lamp from top 2 Stk. - Lamp straight to conveyor 2 Stk. - For mercury lamps - For gallium lamps - Electic capacity lamp 80 W/cm - Selective shiftable 80 / 40 W/cm - Feed speed infinitely adjustable by hand wheel ~ 2 - 7,5 m/min Guodpoumvmkefx Ankob - Location - Voltage / HZ 400 / 50 - Commodity code 8419 3200

Condition: good (used), Year of construction: 2000, Weinig A5 outfeed with automatic board stacker. Guedpfx Anjxftvaekob -Boards are automatically transported laterally with the Weinig 820 right angle transfer. -Boards automatically form a layer and are then placed on the lifting table of the chain conveyor -The completed pack is transferred to the following chain conveyor -Maximum output: 40 cycles/minute for stacker (over 150m/min based on average length boards). -Space required: Length approx. 8000 mm, Width approx. 5000 mm approximately -Pack size max 6100mm x 1200mm x 1200mm(high)

Condition: excellent (used), Year of construction: 2016, I sell the 2-head 2-lamp UV-drying tunnel Burkle UV2 1300 Year 2016 Working width 1300mm. Total length 2,80m Guodpfxot S D U Te Anksb Total power 36,6kW 2 Lamps GA 120 W + HG 120 W Very good condition, available immediately.