Moulder

Weinig Powermat P 23 E

Condition: used, Number of boring spindles 5 St. Working width 230 mm Working height 120 mm Ledpfx Anex Ecgususac

Condition: good (used), Year of construction: 1994, 2-sided planing machine, top and bottom Constant table (always the same feed height) Max. planing width: 600 mm Max. planing height: 280 mm Planer shafts with strip knives Ready for immediate use. Ljdpjhuthyjfx Anueac

Year of construction: 2024, condition: new, Return System Year of manufacture: 2024 The RTS Compact is a standalone system that can be connected to any edgebanding machine (KAM), regardless of the manufacturer. The feed speed is continuously adjustable to match the speed of the edgebander. The RTS Compact is supplied complete with a control cabinet and is ready for operation immediately after installation. Optional: "RTS Compact Conveyor Extension" for easy rotation of parts during cross-edge banding. Optional: "RTS Compact Ergonomics Package" available. A lift table and air cushion table are used at the end of the return conveyor. This option enables ergonomic operation. - Compatible with edgebanders from all manufacturers - Allows single-operator control of the edgebander - Maximum ergonomics - Reduced personnel costs - Gentle material handling - Installation time approx. 0.5 day - Turning device for small parts - With conveyor belt L 4500 x W 800 mm Single-track roller rail Ledpfow Nadmjx Anueac RTS Compact control, optional control box Availability: short-term Location: Flörsheim

Condition: reconditioned (used), Number of spindles 6 St. Working width 230 mm Working height 120 mm Length of the planing table 2500 mm Feed motor 3 kW Feed speed 5-24 m/min. total power requirement 27 kw Dimensions (L/W/H) 3900 x 2200 x 2000 mm weight of the machine ca. 2500 kg Weinig Profimat 23 four-side planer, window version with glazing bead removal or can be used as a grooving spindle ATS control and program control ----- Machine was factory overhauled by Weinig in 2024. Technical Specifications Summary (Please inquire about any additional accessories included) ----- General ----- > Working width: 230 mm > Working height: 120 mm > Number of spindles: 6 > Planer table length: 2500 mm > Feed motor: 3 kW > Feed speed: 5-24 m/min Laodpfxsxpn T Uj Anuec > Total power requirement: 27 kW > Dimensions: 3900 x 2200 x 2000 mm > Machine weight, approx.: 2500 kg Spindle arrangement ----- > Spindle 1: bottom > Spindle 2: right, pneumatically timed up-down > Spindle 3: left > Spindle 4: top > Spindle 5: bottom > Spindle 6: pneumatically timed up-down glazing bead saw Spindle Description ----- > Spindle 1: 4 kW, 6000 rpm, 40 mm diameter > Spindle 2: 7.5 kW, 6000 rpm, 40 mm diameter > Spindle 3: 6000 rpm, 40 mm diameter > Spindle 4: 5.5 kW, 6000 rpm, 40 mm diameter > Spindle 5: 4 kW, 6000 rpm, 40 mm diameter > Spindle 6: glazing bead saw 2.2 kW, 6000 rpm, 40 mm diameter Additional Features ----- > Can be used for glazing bead cutting or as a grooving machine > ATS control, automatic 2-axis positioning for width and height (left and upper spindle) with 99-program memory > Machine operation: Window package Joint control of the right spindle and the glazing bead feed via manual selector switch on the control panel > Spindles with mechanical digital display (Technical data according to the manufacturer - no guarantee!)

Condition: good (used), Year of construction: 1973, Weinig planer 4-sided / U250 / Unimat 250 planing width: 250mm Planing height: 120mm Spindle bottom 7,5 kW Spindle right 5,5 kW Spindle left 7.5 kW Spindle right 7.5 kW Spindle top 7.5 kW Spindle bottom 7.5 kW Spindle sawing unit 7.5 kW Lodpfxsrigq Sj Anuoac with planing heads with milling tools with knives with all accessories good condition - available immediately Location: Austria, near Sankt Pölten

Condition: used, Year of construction: 2006, total width: 3,580 mm, total height: 1,840 mm, Colour: Grey Dimensions (LxBxH): 180 x 358 x 184 cm Price: On request - Year: 2006 - Documentation available: No - CE marking present: Yes - CE certificate present: No - Serial number: 106992 - Number of spindles [pcs.]: 5 - └ Spindle 1: - - Spindle type: Bottom - - Motor power [kW]: 5.5 - - Spindle diameter [mm]: 30 - - Max. planing block diameter [mm]: 130 - - Tool present: Yes - └ Spindle 2: - - Spindle type: Right - - Motor power [kW]: 7.5 - - Tool present: Yes - └ Spindle 3: - - Spindle type: Left - - Motor power [kW]: 7.5 - - Tool present: Yes - └ Spindle 4: - - Spindle type: Top - - Motor power [kW]: 7.5 - - Tool present: Yes - └ Spindle 5: Ledpfxewnhpvj Anueac - - Spindle type: Bottom - - Motor power [kW]: 5.5 - - Tool present: Yes - Max. planing width [mm]: 240 - Max. planing height [mm]: 130 - Feed table length [mm]: 1780 - Feed roller diameter [mm]: 130 - Feed motor [kW]: 3 - System/software: - Conveyor drive: Cardan drive - Lubrication system: Manual - Diameter extraction nozzle [mm]: 140 - Feed speed: Manual - └ Max. feed speed [m/min]: 4 - └ Feed speed control: Continuously adjustable - Voltage [V]: 400 - Current consumption [A]: 88 - Fuse [A]: 100 - Power [kW]: 41.0 - Transport dimensions: 1800mm x 3580mm x 1840mm (l x w x h) - Transport packages [pcs.]: 1 Financial information VAT: The price shown is exclusive of VAT VAT/margin: VAT deductible for entrepreneurs Delivery and trade-in always possible for everything in the industrial sectors Yorick Diebels

Condition: good (used), Obel Pedersen High-frequency continuous belt press Opel-Pedersen press, type 2412 Press length 2500 mm, width 600 mm Ljdjdybr Ropfx Anuoac with glue application system, stacking table, HF generator T20 V and water cooling System has been dismantled.

Condition: as good as new (ex-display), Year of construction: 2021, Number of spindles 5 St. Working width 250 mm Working height 160 mm Length of the planing table 2500 mm Feed motor 4 kW Feed speed 6-24 m/min. control K2 Basic 7"-Touch KUPER SWT XL-5 AUTOMATIC PLANER AND MOULDER ----- LIKE NEW, showroom machine ! - 5 spindles: bottom, right, left, top, bottom - Speed: frequency-controlled 4,000 - 6,000 rpm, spindle 4.5 to 8,000 rpm - Width and height motor-controlled: left spindle radial upper spindle axial - Feed carrier motor-controlled - Additional motor-controlled positioning: right spindle radial and axial left spindle axial - working width 250 mm TECHNICAL DATA ----- Working width (perimeter of tools 163 mm) 15 - 230 mm Working height(perimeter of tools 163 mm) 10 - 150 mm (perimeter of tools 123 mm) 10 - 160 mm Min. workpiece length: single piece: min. 800 mm piece by piece: min. 300 mm The processing of the work pieces is depending on the following operating parameters: material, wood moisture, tools, diameter of the chip removal and feed speed. If necessary adjustments to the operating parameter have to be done. SPINDLE CONFIGURATION ----- bottom, right, left, top, bottom 1st spindle: HORIZONTAL, BOTTOM ----- Siemens IE3 motor with inverter brake 5,5 kW (7,5 HP) Diameter 40 mm Spindle length 250 mm Usabale length for tools Spindle length minus approx. 6 mm Drive, frequency-controlled 4000 - 6000 rpm Perimeter of tools 125 - 160 mm Reference cutter Diameter difference 20 - 25mm to the cutterhead Connecting piece D = 125 mm Quick action lock nut Pro-Lock 2nd spindle: VERTICAL, RIGHT ----- Siemens IE3 motor with inverter brake 5,5 kW (7,5 HP) Diameter 40 mm Spindle length 165 mm Usable length for tools spindle length minus approx. 6 mm Drive, frequency-controlled 4000 - 6000 rpm Perimeter of tools 112 - 200 mm Adjustment path axial 60 mm Adjustable table plate to tool radius Standard profile depth 20 mm Connecting piece D = 125 mm Aspiration individual adjustable shavings guiding plate Quick action lock nut Pro-Lock 3rd spindle: VERTICAL, LEFT ----- Siemens IE3 motor with inverter brake 7,5 kW (10 HP) Diameter 40 mm Spindle length 165 mm Usable length for tools spindle length minus approx. 6 mm Drive, frequency-controlled 4000 - 6000 rpm Perimeter of tools 112 - 200 mm Adjustment path axial 60 mm Standard profile depth 20 mm Adjustable table plate to tool radius Connecting piece D = 125 mm Aspiration individual adjustable shavings guiding plate Quick action lock nut Pro-Lock 4th spindle: HORIZONTAL, TOP ----- Siemens IE3 motor with inverter brake 7,5 kW (10 HP) Diameter 40 mm Spindle length 235 mm Usable length for tools spindle length minus approx. 6 mm Drive, frequency-controlled 4000 - 6000 rpm Perimeter of tools 112 - 200 mm Pressure shoe pneumatically, via linear guides dynamically adjustable Standard profile depth 20 mm Connecting piece D = 125 mm Aspiration individual adjustable shavings guiding plate Quick action lock nut Pro-Lock 5th spindle: HORIZONTAL, BOTTOM ----- Siemens IE3 motor with inverter brake 5,5 kW (7,5 HP) Ljdewgwmnopfx Anusac Diameter 40 mm Spindle length 235 mm Usable length for tools spindle lenght minus approx. 6 mm Drive, frequency-controlled...

Condition: ready for operation (used), Year of construction: 2010, functionality: fully functional, machine/vehicle number: 114550, working width: 230 mm, planing height: 120 mm, number of spindles: 6, Planer and moulder Weinig Powermat 500 for four-sided planing and profiling of solid wood. The machine is equipped with CNC control and the proven PowerLock quick-change system, and also features a mechanized return system for the planed parts, making it ideal for efficient production. Machine Equipment 6 spindles 1st spindle: 7.5 kW, 8,000 rpm 2nd spindle: 7.5 kW, 8,000 rpm, PowerLock Laedpfxsx Sxfvs Anujc 3rd spindle: 7.5 kW, 8,000 rpm, PowerLock 4th spindle: 7.5 kW, 8,000 rpm, PowerLock 5th spindle: 7.5 kW, 8,000 rpm, PowerLock 6th spindle: 7.5 kW, 8,000 rpm, PowerLock Working width: 20 – 230 mm Working height: 8 – 120 mm Worktable: 2.5 m (including straightening fence) Top pressure rollers, spring-loaded Lateral pressure, pneumatic Frequency-controlled feed with brake, feed speed: 5 – 30 m/min Reduced feed roller distance between pendulum holders (400 mm) Additional feed rollers and shortened roller spacing Durofer steel roller, self-cleaning Infeed roller in front of the 1st bottom tool, pneumatic Siemens/Powercom control The machine is in a very good, well-maintained condition, has been professionally operated and regularly serviced, and will remain in operation until 17.12.2026. Inspection of the running machine is possible anytime by appointment. The price includes the tools for all 6 spindles. Dismantling and loading will be invoiced separately to the buyer. The technical description and the machine layout can be found in the documents.

Condition: excellent (used), CASOLIN TOPStar 530 12/24 thicknesser Technical specifications: Max planing width: 520 mm Max planing height: 300 mm Knife shaft diameter: 110 mm Number of knives: 4 pieces Feed speed: 5/8/12/19 m/min Electric lifting Extraction nozzle: 160 mm Power supply: 400 V Motor power: 5.5 kW Overall dimensions: Length: 1060 mm Lasdpfx Anju T D Hqsuoc Width: 1050 mm Height:1280 mm