Window production line

WEINIG Conturex C126

Condition: excellent (used), Year of construction: 2006, functionality: fully functional, Fully working UniControl 12 year 2006 from Norway - for exact technical specification please open attached document in PDF below. Cross section UniTec 12: - saw unit - edge round cutter from bottom - Hubspindel no.1 - Hubspindel no.2 - Hubspindel no.3 Long , profile section UniVar 12: - Profil cutter - Profil cutter - Profil cutter horizontal - Profil cutter - Profil cutter Gtsdpfx Aemgc I Negbst - Profil cutter Total el power 114 kw 400 V AC Need for suction 270 m3/min Need of compressed air 1000 L/ minMachine was in use until 15.08.2023 Payment: Prior to loading Delivery: ex. factory Rendalen - Norway Machine is located in Norway ( near to Trondheim) The machine is now disconnected, stored in dry and warm wearhouse, and are ready to be shipped. Rekman Maskin & Service - service of woodworking machines since 1986.

Year of construction: 2001, condition: used, Pictures to follow - machine is being overhauled Technical data: - X-axis travel: 7300mm - Y-axis travel: 1000mm - Z-axis travel: 650mm - Swivel angle A-axis: 0-90° freely programmable Gsdpfet Ea Tfox Agbett - Swivel angle C-axis: 0-355° freely programmable - Max. Machining length without end face machining: 7300mm - Max. Machining length with end face machining: 6980mm - Tool changer with 10 places and a saw blade holder - 9 material clamps - SK30 tool holder - 2-layer machining

Condition: good (used), Year of construction: 2019, Weinig Conturex Greenline Plus CNC Window production machine Description; Year of construction: 2019 Processing workpiece length: 4500 mm Automatic part check on infeed Clamp adjustment in connection with rebate clamps Main motor 30 kW indirect driven Unispindle for mortizing, drilling and special machining Tool changer 35 and 17 positions HSK 63F tool holder Special software for machine data and company data registration In/output buffer length: 2000/ 2500 mm Optional tool set/ plan available Full description on request (Despite our great care all changes, mistakes in technical data, prices and all information is subject to (typing) errors. No guarantee on printed data! Availability subject to prior sales). (Alle Änderungen und Irrtümer in den technischen Daten, Angaben und Preisen vorbehalten! Keine Garantie auf gedruckte Daten!. Verfügbarkeit vorbehaltlich Zwischenverkauf). Prices excl. advertisement cost MachineSeeker / Preise exkl. Inserierungskosten MaschinenSucher Best woodworkingmachines from the Netherlands Holland Gtsdpfx Agsw N Nixsbot Die besten holzbearbeitungsmaschinen aus die Niederlande De beste gebruikte machines uit Nederland

Condition: new, Year of construction: 2024, Drilling and milling machine Kudu with CNC control and tool changer (3-axis) drilling and milling machine with movable processing unit - the table remains stationary, the drill head moves. The drilling machine can be used both manually and fully automatically. After each drilling process, the processing unit moves to the next drilling position fully automatically in the X and Y axes. Operation is kept very simple. The data can be transferred to the machine control using the file formats DXF./DWG. be carried out via a programming station. Alternatively, the system can also be programmed directly on the machine control. The system is very robust and consists of proven machine components. Technical data: • Measuring length: 6,000 mm • Total length: 8,050 mm • Stable machine base • Drilling head speed: up to 2500 rpm (standard version), is supplied with the right speed for your application. • Tool holder: SK 40 • Drive of the X, Y and Z-axes via servomotors • Rapid traverse in the X-axis: 20 m/min • Rapid traverse in the Y-axis: 5 m/min • Distance from upper edge of table to lower edge of tool holder 400 mm • Table width 480 mm • Working height: 1050 mm • Drilling diameter: 3 to 30 mm in St. 50 (depending on the tool) • Tapping: M4 - M30 (with compensating chuck) • Machining path in the Y axis: 300 mm • Tolerance in the X axis: + - 0.1 mm • Tolerance in the Y-axis: 0.06 mm • Tolerance in the Z-axis: 0.06 mm • Drill head drive motor: 5.5 kW • System weight: 2300 kg • System dimensions: 8050 mm x 3000 mm x 2388 mm (see layout plan) • Power connection: 32 A • Air connection: 8 bar • Protection of the system at the front via light barrier • Access protection at the rear, machine fence • Control touch screen panel 21.5", reinforced front glass • Easy programming on the Machine • Milling of long holes and circles • Lubrication takes place using a minimum quantity spray system • without material vices • Remote maintenance possible using Teamviewer (LAN interface) • Tool memory for drilling tools, with dimensions, speed • Simulation of work processes • Digital hand wheel Godpsfu Ivzofx Agbjtt Your advantages • The surface of the workpieces is protected • Clear, graphic surface • Machining directly at the end of the workpiece is not difficult • 50% space saving compared to pushing machining • Chips are collected in the chip tray • Simplest programming & operation • Minimum quantity spray system (standard) • Programming errors are prevented by CAD /CAM excluded

Condition: used, Year of construction: 2009, max. workpiece length 4500 mm profile spindle 1 Stück main drive 20 kW Control Siemens Weinig Conturex 2 C 114 ----- Working width: 40-260 mm Working height: 25-110 mm 2 x PowerGrip clamp tables, 2 x 2280 mm ----- Workpiece length 200 - 4,500 mm Workpieces over 2,700 mm in length are machined using a repositioning cycle. Main spindle 1: ----- Motor with brake 20 kW HSK 63F Electronically adjustable speed 2,000-18,000 rpm Maximum tool length from flat surface HSK 63 F: 290 mm With C-axis Tool magazine: ----- Number of pockets: 30 mm Pitch between pockets: 100 mm Permanently installed multi-spindle drilling head ----- Gtedpowunwyjfx Agbot For horizontal and vertical drilling and milling work without tool changes ----- Price ex-site Prices for disassembly and loading onto customer trucks Transport within Germany and abroad as well as reassembly Commissioning and, if required, new profiles are available upon request! Used tools included (drawings available upon request): ----- Wood: IV 68, 78, 88, opening inside and out, with hinged weatherboard Wood-aluminum: IV 68/68, 78/78, 87/68, 97/78 Lift-and-slide doors IV 68 and 78 Front doors IV 68 and 78 Pivot windows Corner connection: counter/dowel Technical specifications according to the manufacturer - no guarantee! Detailed technical description available upon request!

Year of construction: 2010, condition: excellent (used), The QUADRA L1 consists of an automatic loading magazine and a gripper feed system for profile lengths up to 7,500 mm. The feed unit transports the profile bar to the machining unit, which is equipped with 6 spindle motors for drilling and milling operations all around the profile. The sawing module is 3-axis and fitted with a 600 mm diameter saw blade. The finished machined part is transported from the machining area to the unloading table by a discharge unit, where it is conveyed to the retrieval position via powered belts. The machining area is fully enclosed and can optionally be fitted with sound-absorbing mats. Automatic loading magazine with a maximum capacity of 15 profiles at a width of 100 mm. The profiles are transported to the gripper position via belt conveyor. Gedjxvbynepfx Agbett Automatic 3-axis CNC feed unit. Based on profile data, the unit positions itself according to length and profile cross section at the loading position to feed the bar for processing. The gripper clamps the profile bar at a predefined position specified in the technical drawing. A 600 mm saw blade allows a wide cutting range thanks to its 3-axis travel capability. Our price is net plus the applicable VAT. Transport is not included, but loading onto the customer’s truck can be arranged upon request.

Condition: used, Year of construction: 2007, operating hours: 18,000 h, functionality: fully functional, machine/vehicle number: 0-250-21-0442, travel distance X-axis: 3,850 mm, travel distance Y-axis: 2,015 mm, travel distance Z-axis: 525 mm, rapid traverse X-axis: 80 m/min, rapid traverse Y-axis: 60 m/min, rapid traverse Z-axis: 20 m/min, feed length X-axis: 3,850 mm, feed length Y-axis: 2,015 mm, feed length Z-axis: 80 mm, feed rate X-axis: 80 m/min, feed rate Y-axis: 60 m/min, feed rate Z-axis: 20 m/min, Equipment: documentation/manual, Sale of a CNC machining center that is fully operational and has been completely overhauled. Homag Weeke Venture 5 Optimat BHC 550 In 2024, extensive maintenance measures were carried out. The main spindle was completely refurbished. Additionally, a new UPS and a new vacuum pump were installed. The frequency converter was also replaced. The offer also includes a Flex 5 aggregate (not required for standard operations); however, this unit is non-functional but a repair quote is available. Specification sheet for the Weeke Venture 5 Optimat BHC 550 (year of manufacture: 2007) Main technical data Dimensions & Weight Length: approx. 6,350 mm | Width: approx. 2,550 mm | Height: approx. 2,450 mm | Weight: approx. 6,500 kg • Processing Area (X, Y, Z) X-axis approx. 3,250 mm | Y-axis approx. 1,300 mm | Z approx. 150 mm • Main Spindle Power: 12 kW, liquid-cooled Tool holder: HSK-F63 Speed steplessly programmable from 1,250 to 24,000 rpm • Drilling Units & Milling o Vertical: 25 spindles (32 mm pitch), depths up to 38/55 mm, tool holder diameter 10 mm, max. drill diameter 35 mm o Horizontal: 4 spindles in X-direction, 2 in Y-direction (32 mm pitch), depths up to 38 mm, max. drill diameter 20 mm o Grooving/Sawing unit: swivels 90° in XY-direction, cutting depth up to 30 mm, up to 7,500 rpm, max. tool diameter 1 mm • Workpiece Clamping & Table o Pod and rail table or console table with 6 adjustable supports in X-direction, LED display for position Gedoxrcf Djpfx Agbett o Suction cups: e.g., 12 vacuum suction cups or various tubeless versions o Vacuum pump: approx. 100 m³/h • Tool Changer & Control o Tool changer: 14 positions front (X-direction) and 8 positions rear (Y-direction) o Control: POWERCONTROL PC 85T (TFT 17″), WOODWOP 5.0 software, incl. MDE and production lists • Additional Equipment & Safety o FLEX-5 interface for sawing/milling/drilling o Tool picking function (Pick-Up), safety mats, safety fence/doors, barcode scanner, etc. Additional technical key data from supplementary sources for 2007 • Work area: X ≈ 3,250 mm · Y ≈ 1,220 mm · Z ≈ 125 mm • Tool slots: approx. 16 positions • Vertical drilling spindles: 12 units • Horizontal drilling spindles: 4 in X, 2 in Y • Main motor: 12 kW, HSK-F63, speed up to 24,000 rpm • Other equipment: Pod-and-rail table, positioning aids, crosshair laser, LED display, HOMAG POWER CONTROL, WOODWOP 5.0 software, safety mats, handheld terminal, UPS, CE marking

Year of construction: 2007, condition: ready for operation (used), A CNC profile drilling machine Voortman with a movable drilling cabin is available. Working height range: 30mm-1050mm, positioning speed: 40m/min, table width: 300mm, max. working width: 1800mm, support depth: 1500mm, tool stations: 5, max. travel speed: 40m/min, tool holder: SK40, drilling diameter range: 5mm-40mm, thread cutting range: M6-M30, working length: 16200mm. Documentation available. On-site inspection possible. Godpfx Agjxp Rb Iebett

Condition: good (used), Year of construction: 2018, functionality: fully functional, machine/vehicle number: 10000241, workpiece height (max.): 160 mm, workpiece width (max.): 310 mm, number of spindles: 4, WEINIG POWERMAT 1500 - SPECIAL MACHINE CONFIGURED FOR MILLING WOODEN DOOR FRAME PANELS Working width 30 - 310mm (with tool flight circle 93-125mm) Working height 10 - 160mm (with tool flight circle 93-163 mm)Description of machine parameters Number of spindles 4 Spindles bottom 1 Spindles right 1 Spindles left 1 Spindles top 1 Separate motor for each spindle Electronic feed incl. brake, infinitely variable 5-40 m/min. Short infeed table 1.2 m long with 2 driven rollers above the table Godeuygcwspfx Agbett Hard-coated machine table surface Manual lubricant pump WEINIG Comfort Set Control system WEINIG MEMORY PLUS-SYSTEM CE mark Declaration of Conformity

Condition: good (used), Year of construction: 2009, Elumatec SBZ 140 Extended Length Version: 7.6 meters Approximate weight: 5,000 kg Automatic tool changer 2-section clamping system 2 pneumatic stops Safety hood Light curtains Automatic clamp detection Central lubrication Coolant spray system Chip trolley Conditioning unit Max spindle speed: 24,000 rpm Tool holder: HSK-63F, 8-position tool changer Max milling diameter: 80 mm Max saw blade diameter: 200 mm Compressed air: 7 bar The SBZ 140 is a 4-axis profile machining center (axes: X, Y, Z + A). Designed for aluminum and thin-walled steel profiles. 4-axis CNC machining center (X/Y/Z + tilt/rotation axis A) X-axis: approx. 7,900 mm travel Y-axis: approx. 850 mm travel Z-axis: approx. 650 mm travel A-axis (rotation/tilting): Freely programmable angle, –90° to +90° Axis traverse speed: X-axis up to approx. 65 m/min, Y- and Z-axis up to approx. 60 m/min (varies with configuration) Control: 4-axis CNC system, PC control, color display, USB & network connectivity. Software: eluCam. Automatic material clamps; automatic positioning via index pins Pendulum/shuttle operation (two work zones), improving production throughput time. In addition to milling and drilling, also tapping, sawing, and profile machining—all with stationary clamped profiles. Please note: The information on this page has been obtained and compiled to the best of our knowledge, but its accuracy cannot be guaranteed. Accordingly, it does not constitute a representation or contract and we recommend verifying all relevant details. Financial information VAT/margin: VAT: The price shown is exclusive of VAT (VAT deductible for business customers). Gtjdpfx Agjx E Ahzsbot