Press brake VLM - VLMDN

VLM VLMDN

Condition: good (used), Year of construction: 1998, functionality: fully functional, pressing force: 35 t, working width: 2,000 mm, pressure 35to Hsdpfx Agewagyks Usn max. bending length 2000mm arrester behind drive capacity 4,5 kW weight 3000kg

Condition: used, Year of construction: 1999, pressure 180 t chamfer lenght 3100 mm distance between columns 2550 mm throat 310 mm stroke 200 mm ajustment speed 80.0 mm/sec working feed 10.0 mm/sec return speed 58.0 mm/sec dayligth 385 mm table width 240 mm work height max. 885 / 1050 mm oil volume 180 ltr. total power requirement 15.0 kW weight of the machine ca. 9850 kg. range L-W-H 4200 x 1750 x 2450 mm from a maintenance workshop well-maintained condition (!!) - in checked condition - machine video - ?v=o_t9BBMsNNs Equipment: - simple, conventional electro-hydraulic press brake * with torsion shaft for parallelism of the upper beam - electric back stop, with ball screws (X axis) * with 4x manually adjustable stop fingers * fine adjustment via handwheel at the front, with analog position display - electro-motor adjustment of the immersion depth (Y1 + Y2 axis) * with digital position display - swiveling operation, mounting side on the left - 1x set of upper tools - 1x rotatable MULTI V universal die block Hsdpfjxab Erjx Ag Usn - 2x front / movable support arms - 1x freely movable 2-hand foot control - operating instructions (PDF)

Condition: excellent (used), functionality: fully functional, punching force: 110 t, Geka punching machine model Puma 110/E-500, punching power 110tm, hole capacity diameter 40 x20, neckline 500mm, in good condition and very equipped. Hsdpfxovdkpre Ag Ujn

Condition: used, Year of construction: 1994, total length: 3,400 mm, total width: 1,800 mm, total height: 2,600 mm, Colour: Grey Weight: 10.400 kg Price: On request - Year: 1994 - Documentation available: No - CE certificate present: No - Serial number: 1776 - Drive system: Conventional Hodpoybdtcjfx Ag Uon - Power [kW]: 22.0 - Press force [ton]: 220 - Max. working width [mm]: 3050 - Column gap [mm]: 2620 - Backgauge depth [mm]: 800 - Max. stroke [mm]: 240 - Tools included: Yes - Options: Digital readout - Transport dimensions: 3400mm x 1800mm x 2600mm (l x w x h) - Transport weight [kg]: 10400kg - Transport packages [pcs.]: 1 Financial information VAT: The price shown is exclusive of VAT VAT/margin: VAT deductible for entrepreneurs Delivery and trade-in always possible for everything in the industrial sectors Lukas van Rossum

Condition: new, Year of construction: 2024, Attention!! Special Offer!! Warranty inspection free of charge—only for Customers who have taken part in the demonstration at the machine showroom in Bydgoszcz. A part of our machines is available IMMEDIATELTY. Hydraulic press brake PBO-2580-CNC OT-41 Specifications - Maximum bending thickness (S235): up to 4.0 mm - Nominal bending force: 800 kN - Maximum bending length: 2500 mm - Throat depth: 250 mm - Maximum stroke: 120 mm - Daylight: 385 mm - Distance between side frames: 2000 mm - Backgauge travel distance: 600 mm Hedpfx Ajh Ranljg Ujn - Motor power output: 5.5 kW - Length: 2600 mm - Width: 1450 mm - Height: 2300 mm - Weight: 4500.0 kg Tools - Front supports: 2 pcs. - Backgauge drive (travel along the X-axis): servo motor - Ram drive (travel along the Y-axis): servo motor - Backgauge fingers positioning (R-axis): manual - Punch quick change tooling system form AMADA Otinus CNC OT-41 control The CNC controller Otinus is featured with convenient and intuitive menu. The software calculates the bending angle on its own. The large color touchscreen is readable from any angle. The controller can store up to 2,000 programs of 30 steps each. Top quality components - Rexroth hydraulic valve - Schneider electrical components - Omron and Schneider safety circuit parts. - Steel hydraulic line tubings - Hydraulic lines made of steel instead of rubber reduce the risk of future leaks. Safety We attach great importance to the safety of our Clients and their employees; therefore our press brakes are equipped with visible safety labels, side guards, rear safety doors, easily accessible safety switches and light curtains that protect the operator against inserting their hands between the upper and lower dies. The machines comes with carefully prepared instructions manual. The machine has a CE marking and EU declaration of conformity. Oil cooling system The Oil Cooling System guarantees the stability of the machine's performance even after long, continuous operation. Assistance by a specialist We strive to maintain constant communication with our Customers. To support this, every machine purchase includes a specialist support package with hours of expert guidance. Within the service, our technicians may: - Specify the bending steps for intricate parts. - Advise on material and gas selection - Assist in the selection of operating parameters for different materials Included in the machine price 2-day training including installation of the machine - 1st day (up to 8 hours) - installation of the machine and learning to use the controller. - 2nd day (up to 8 hours) - independent work on the machine under the supervision of our technician with the possibility of programming specific parts manufactured by the Client. Telephone consultation with a specialist - 7.30 a.m. to 9 p.m. (Mon-Sat) - package of 8 hours to be used within 12 months - Free lending of transport rolls and two lifting jacks for easier positioning of the machine at Clients' facilities. The rollers and jack will be delivered after prior notification (no less than 7 days before delivery of the machine). Terms of cooperation - 24 month warranty - The machine is brand new - Warranty and post-warranty service provided by the seller - The Client is responsible for the machine during unloading and transporting on-site

Condition: used, Year of construction: 1998, total length: 3,350 mm, total width: 2,180 mm, total height: 2,780 mm, Colour: Grey Weight: 9.000 kg Price: On request - Year: 1998 - Documentation available: Yes Hedoyrpvkspfx Ag Uon - CE marking present: Yes - CE certificate present: No - Serial number: 230 - Drive system: Conventional - Power [kW]: 11.0 - Press force [ton]: 160 - Max. working width [mm]: 3100 - Column gap [mm]: 2550 - Tools included: Yes - Options: Digital readout - Transport dimensions: 3350mm x 2180mm x 2780mm (l x w x h) - Transport weight [kg]: 9000kg Financial information VAT: The price shown is exclusive of VAT VAT/margin: VAT deductible for entrepreneurs Delivery and trade-in always possible for everything in the industrial sectors Lukas van Rossum

Condition: used, pressure 70 t chamfer lenght 2600 mm distance between columns 2750 mm Hjdpfx Agjtqqqie Uon stroke 60 mm total power requirement kW weight of the machine ca. 4,3 t dimensions of machine L x W x H 4,45 x 1,30 x 2,53 m Accessories: upper and lower die (each in segments) on 2500 mm length, 2 upper die segments each 835 mm long, back stop

Condition: used, Year of construction: 2006, pressure 135 t chamfer lenght 3050 mm distance between columns 2600 mm stroke of upper beam 265 mm throat 450 mm dayligth 530 mm working feed 10,0 mm/sec ajustment speed 160 mm/sec return speed 100 mm/sec Control CYBELEC ModEva 10S work height max. 900 mm table width 104 mm back stop - adjustable 800 mm oil volume 250 l total power requirement 18,5 kW weight 10900 kg range L-W-H 4250 x 1700 x 2850 mm from a maintenance workshop - good condition (!!) New price ~ 84.000 euros Furnishing: - with DELEM numerical CNC control model DA 66W * 2D graphical programming * automatic bending sequence calculation and collision detection * high-quality color LCD screen (TFT) - pivoting control, front right - controlled axes : Y1 + Y2 + X + R + CNC crowning (WILA) - CNC electric backgauge (X axis) Hsdpfsyyqkgox Ag Ujn * Travel speed 500 mm/sec. - CNC electric height adjustment (R axis) * Travel speed 350 mm/sec. * Travel range 250 mm - 4x manually adjustable stop fingers - Back gauge with ball screw + linear guides - WILA CNC motorized table crowning - FIESSLER laser safety device at the front - Upper tool holder, with crowned upper wedge & quick-change adapter (Amada) - WILA matrix shoe - manual clamping - 2x front - movable - robust support arms * Mounted on a linear guide rail system - side protection - rear protection - Stress-relieved steel construction body = durable monobloc frame - free-moving footswitch - User manual + CE safety standards

Condition: ready for operation (used), Year of construction: 2006, This Durma AD-S 30135 press brake was manufactured in 2006. It features a ModEva 10S control unit and has accumulated 39,801 working hours. With a bending length of 3050mm and a tonnage capacity of 135t, it's designed for robust performance. Consider the opportunity to buy this Durma AD-S 30135 press brake. Contact us for more information. Additional equipment Hodeyaincepfx Ag Usn • Additional Tool Set: Sold separately Machine Benefits Technical Machine Benefits • Cnc operated axes: y1, y2, x, r (3-axis press brake) / manually operated axes: z1, z2 • Bending length: 3050 mm / tonnage: 135 t