Filter system extraction system

unbekannt Stofffilter

Condition: good (used), Dust extraction fan, extraction, dust blower, extraction system, dust blower, dust extraction device, separator, welding smoke filter, welding smoke extraction, smoke gas extraction fan, filter system, Cartridge dust extraction system -Filter system: -Filter frame: 2190/1460/H2080 mm -Vibration motor: 0.25 kW -Funnel frame: 2235/1440/H2520 mm Cedpfx Afjwrb I Hjgehc -Opening: Ø 390 mm / 500 x 220 mm -Individual components: see photos -Weight: 200 kg / 590 kg

Condition: new, range L-W-H 675 x 510 x 880 mm weight 56 kg Chsdsu Iml Ijpfx Afgsc 5 St. Professional tool trolley for workshop equipment. Internal dimensions of the upper 4 drawers 56 x 43 x 10 cm. Inner dimensions of the lower drawer 56 x 43 x 17 cm. Dimensions of the wheels 100 x 30 mm.

Condition: new, Year of construction: 2026, The CORMAK HBS260 metal bandsaw for cutting pipes, profiles and bars is widely used in locksmith and metalworking workshops where precision, quality and cutting speed are essential. The model features a pivoting arm from 0° to 60°. The frame design ensures precise and quiet operation. It has a removable chip tray for easy cleaning! Machine characteristics The CORMAK HBS260 horizontal metal bandsaw with a pivoting arm enables cutting perpendicular to the material axis and at any angle within the range of 0° to 60°. The material can be fed manually or by any mechanical device, while the tool feed operates automatically. The blade guides are fitted with special carbide plates and bearings, which have a significant influence on the blade’s guidance, service life, straightness, accuracy and cutting quality. The carbide guidance system greatly reduces machine and blade wear. The machine is equipped with an efficient coolant pump with a closed coolant circulation system. The saw arm is made from a single cast-iron element, and with the use of a 27 mm wide cutting blade, it enables series cutting of both profiles and solid materials. The vice is mounted on an adjustable base and features a quick-clamping system. The blade guides are fitted with hard metal (carbide) plates and rolling bearing systems. These carbide guides are responsible for the cutting precision and straightness. The upper part of the base is shaped as a tray for draining coolant and collecting chips generated during the cutting process. The base is fitted with a cast-iron worktable with a pivoting arm and a control panel mounted on a separate arm. In the cutting process, the main cutting motion is the movement of the cutting blade, while the feed is achieved by lowering the arm. The arm lowering speed (cutting speed) is controlled by a hydraulic cylinder. The feed rate is regulated via the saw’s control panel. Two blade speeds are available: 35 and 70 m/min. When the arm reaches its lower position (after the cut), the drive to the cutting blade is automatically switched off. Safety is ensured by blade guards and micro-switches that stop the motor after the cutting cycle or when any guard is opened. Additional protection automatically switches off the bandsaw in the event of blade breakage. Blade size [mm] 2520 x 27 x 0.9 Blade tension mechanical (manual) Chjdpfx Afoudi Uzsgsc Blade speeds [m/min] 35, 70 Arm lowering control stepless – hydraulic cylinder Vice base height [mm] 860 Saw wheel diameter [mm] 300 Saw frame swivel [°] 0–60 Power supply 3-phase 400V Main motor power [kW] 1.1 / 1.5 Coolant pump motor power [kW] 0.05 Dimensions with base [cm] 150 x 80 x 140 Weight [kg] gross/net – 210 / 180 kg Additionally 2 M42 saw blades 5L Emulsol ZW580 magnetic chip collector

Condition: used, Condition: NEW with pneumatic clamping device. The universal assembly station for the production of wall, ceiling and roof elements in timber frame construction,ceiling and roof elements in timber frame construction. - Heavy-duty, basic structure of the machine frame for a flat work surface - Clamping of the elements via 9 system clamping beams with pneumatic pressure cylinders. The system clamping beams are extendable for element heights from 100 to 3,800 mm. The cylinder stroke is 320 mm, the clamping force per cylinder is approx. 420 kg/4,200 N. at 10 bar operating pressure It can be clamped in two groups of 5 pieces and 4 pieces, two elements can be clamped/worked on at the same time. - Planking of the work surface as far as technically possible with wooden panels. (A perforated metal panel is available as an option, as shown in the photo)) - Stop system at the bottom with 9 pins and at the side with 7 pins for dimensionally accurate elements. - Swivelling device of the assembly station via 3 hydraulic cylinders for panel weights up to panel weights of up to 4,000 kg to 85° (95°). The hydraulic system is compactly integrated in the frame area of the assembly station. - The electrical control cabinet is also installed underneath the assembly station for protection. - The functions are operated via a control bottle. - A compressed air connection and socket are installed on both ends of the station. and on the long side of the station there are 2 sockets and 2 compressed air connections compressed air connections for connecting hand-held devices. - The stations are modular in design, so that they can be expanded immediately or later with a to form a complete turning station. You can see a turning station in picture 3. Chjdpezhnafjfx Afgjc - Further options: Assembly table without set-up function Perforated metal panels Other working dimensions on request Working area: - Maximum element size (W x H): 12,000 x 3,800 mm - Minimum element size (W x H): 1,000 x 100 mm - Cylinder stroke of the clamping cylinders: 320 mm - Stop/ socket pin height: 120 mm - Working height: approx. 700 mm - Colour RÁL 7035 light grey

Condition: ready for operation (used), Year of construction: 2015, Length: 9401mm, width: 2091mm, height: 5668mm, weight: 8.816t, with pipes and documentation, the dust collector was not used much. Csdpfxok Ea Uuj Afgshc

Condition: used, mileage: 100 km, power: 129 kW (175.39 HP), first registration: 10/2015, fuel type: diesel, overall weight: 7,490 kg, color: white, emission class: euro6,

Condition: new, Dimensions (L,W) 1400 x 1750 mm Weight , kg tiltable yes/no ja RUCHSER assembly tilting table RU-MKS 1,4 ----- Universally applicable work table e.g. for frame assembly, roller shutter box assembly, bars, sash fittings, glazing Equipment of machine, alternative / optional equipment on request! Pos. 1.0: Article no .: 8820000 RU-MKS-1,4 assembly tilting table Basic dimensions 1400 x 1750 mm, extended 3400 x 2500 mm Support surface with 3 support bars, 2 of which are adjustable, one permanently mounted on the upper extension, covered with felt. Support surface with width and Height / depth pull-out. Pneumatic tilting device, Payload 130 kg. Actuation via foot valve. Roller conveyor can be folded down manually and pulled out to the side from 1400-2500 mm, roll length 140 mm closed. Roller conveyor height in vertical Table position adjustable from 300-380 mm, Horizontal working height adjustable from 920-970 mm. ! For security reasons, at least one Flat clamping cylinders can also be ordered! Pos. 1.1: Article no .: 5582 Pneumatic swivel device of the roller conveyor for MKS Pos. 1.2: Article no .: 21127 Support beam 1400mm not extendable for RU-MKS Pos. 1.3: Article no .: 5585 360 ° rotating device with pneumatic locking in 180 ° steps Rotary brake with double-sided actuation When using the rotating device, the minimum roller conveyor height of the increases MKS tables on 330mm Pos. 1.4: Article no .: 6455-01 6 pieces of storage boxes with 2 compartments each, swivel mounted; for RU-MKS Pos. 1.5: Article no .: 5597-10 Driving device for semicircular rails for RU-MKS-P4 Actuation via foot valve, mounted on the roller conveyor side. Pos. 1.6: Article no .: 6354-6 3 double meter semicircular runways 30 x 10 mm. Pos. 1.7: Article no .: 5193-1 Flat clamping cylinder with manual valve, clamping range 130 mm, can be hidden attached to the support beam, with felt on the system part, Attachment left or right Please specify. Item 1.8: Article no .: 5584 Lifting device 450 mm for working on the vertical element. Actuation via foot valve. Maximum payload 200 kg for RU-MKS ...- 1.4 and 140 kg for RU-MKS ...- 2. Item 99.1 Packaging on a pallet ----- Cjdox H Al Aopfx Afgshc Total price in this version: on request! See attached video and PDF brochure. (Technical information according to the manufacturer - without guarantee!)

Condition: new, range L-W-H 960 x 460 x 860 mm weight 75 kg 8 St. Tool trolley with 8 drawers, all with tools. - The pull-out drawers are all ball-bearing. - The entire workshop trolley is lockable. - The workshop trolley has 4 stable castors, 2 steerable and lockable. - The tools included are made of chrome vanadium steel. - The workshop trolley has 4 stable castors, 2 steerable, 2 lockable, which ensure very comfortable rolling. On the tool trolley there is a stable worktop made of polypropylene plastic. - The tools included in the workshop trolley are made of chrome vanadium steel and are stored in Styrofoam/foam inserts. + Drawer 1: - 1/4" inch: 13 nuts from 4mm to 14mm, 11 long nuts 4mm – 13mm Ratchet, universal joint, extension. Cjdpfx Ajzb Rbtsfgshc - 3/8" inch: 10 nuts from 10mm to 19mm, 11 long nuts from 6mm to 19mm Ratchet, universal joint, extension. - 1/2" inch: 17 nuts from 8mm to 32mm, 9 long nuts from 10mm to 22mm Ratchet, universal joint, extension. + Drawer 2: - Accessories 1/4" inch ratchet: Torx nuts without hole T8,T9,T10,T15,T20,T25,T27,T30,T40 Torx nuts with hole TT8,TT9,TT10,TT15,TT20,TT25,TT27,TT30,TT40. Allen nuts H3 to H8 Slotted nuts SL4 to SL7 Cross nuts PZ0 to PZ3, PH0 to PH3 Multi-tooth nuts M8, M10, M12 Five-star nuts TS10, TS15, TS20, TS25, TS27, TS30, TS40, TS45, TS50 - Accessories 3/8" inch ratchet: Attachment for bits Torx nuts without hole T40, T45, T50, T55, T60, T70 Torx nuts with hole TT40, TT45, TT50, TT55, TT60, TT70 Allen nuts – H7, ??H8, H10, H12, H14 Slotted nuts SL8, SL10, SL12 Cross nuts PZ3, PZ4, PH4, PH8 - Accessories 1/2" inch ratchet: Allen H14,H17,H19,H22,H24 Allen key H5,H10,H11,H13 Torx T40,T45,T50,T55,T60,T70,T80 Ribe R9, R10, multi-tooth M16 Multi-tooth M9,M10,M12,M14,M16,M18 Short attachment, long attachment, medium attachment, Torx T30,T45,T50, Allen key H7 + Drawer 3: - Open-end ratchet wrench 8-9-10-11-12-13-14-15-16-17-19-22mm; - Double ring spanner set 8-piece 6-7mm, 8-9mm, 10-11mm, 12- 13mm, 14-15mm, 16-17mm, 18-19mm, 20-22mm - Torque wrench + Drawer 4: - Precision mechanics screwdriver Slotted: SL3.0 x 100mm, Cross: PH0 x 100mm - Screwdriver with soft grip and outside hexagon: Slotted: SL6 x 38mm ; SL5 x 75mm ; SL6 x 100mm ; SL8 x 150mm Cross: PH2 x 38mm ; PH1 x 75mm ; PH2 x 100mm ; PH3 x 150mm - Torx screwdriver: T6 x 80 ; T7 x 80 ; T8 x 80 ; T9 x 80 ; T10 x 80 ; T15 x 100 ; T20 x 100 ; T25 x 100; T27 x 100 T30 x 100 ; T40 x 150. + Drawer 5: - T-handle Allen / hexagon set with ball head: 3 x 115mm ; 4 x 120mm ; 5 x 140mm ; 6 x 160mm ; 7 x 170mm ; 8 x 175mm ; 10 x 200mm. - T-handle TORX T10 – T40 + Drawer 6 - Circlip pliers set inside/outside 4 pcs., 2x curved, 2x straight - Pliers set: combination pliers, side cutters, straight needle-nose pliers, curved needle-nose pliers, pipe wrench. - hammer + Drawer 7 - Socket wrenches 6, 7, 8, 10, 11, 12, 13, 14mm + Drawer 8 - Tools for bodywork processing

Condition: excellent (used), functionality: fully functional, Saw dust extraction unit SCHUKO STA 5.5 kW Width: 2200 mm Height: 3600 mm Depth: 1100 mm Bag length: 200 cm Filter sleeve diameter: 140 mm Number of filter sleeves: 54 pcs Collection bags: 3 pcs Collection bag diameter: 500 mm Suction port: 250 mm Chjdpfx Afsx I N A Degjc Main motor power: 5.5 kW Filter bag shaking system Extraction pipes included

Condition: excellent (used), color: blue, lifting height: 36,000 mm, Year of construction: 2023, operating hours: 179 h, Drivetrain Drive: Wheel Weights Empty weight: 3.475 kg Functional Lifting capacity: 2.400 kg Dimensions of cargo space: 915 x 230 x 310 cm CE mark: yes Maintenance, history and condition Number of owners: 1 Technical condition: very good Visual appearance: very good Other information Delivery terms: EXW Latest inspection: 2024-06-17 Additional information Please contact Vink Machinery for more information Csdpfx Afjv Dwd Nogshc = Additional options and accessories = - Hook blocks = Remarks = Böcker AHK 36E * Year of construction 2023 * 179 working hours * Battery and 230 Volt drive * 36 meter hook height * 27.5 meter horizontal reach * 2400 kg lifting capacity * Wheel drive * Equipped with dismantling function (Coming-home) * Equipped with camera on the mast * Spotlight on jip * 3475 kg own weight * Inspection until June 2025 * including documents