Welding table with grooves

unbekannt 3030/3000/H500 mm

Condition: used, diameter div. number 40x Cedpfx Agsww Nbferjhd tool adaptor BT 40

Condition: used, Year of construction: 1990, functionality: fully functional, machine/vehicle number: D08L/7863, Offer Number: D08L/7863 Machinetype: straightening and cutting machine Make: WAFIOS Type: R51PL Constr. year: 1990 Chodpewi S Eqsfx Agrod diameter range: 7-14 mm cutting length: 3000 mm speed - meters/min: 90 Location: In our warehouse

Condition: used, plate width 3000 mm plate depth 2000 mm plate height 230 mm weight of the machine ca. / t Chedpfoud Iw Ujx Agrsd Clamping plate Dimensions: 3000 x 2000 x 230 mm T-slot dimensions: 42 x 72 x 74 (H) The images are for illustrative purposes only. More pictures will follow.

Condition: new, Year of construction: 2025, functionality: fully functional, total height: 5,600 mm, total length: 11,200 mm, total width: 5,100 mm, type of input current: three-phase, warranty duration: 24 months, inner dimension height: 4,970 mm, inner dimension length: 11,000 mm, temperature: 80 °C, inner dimension width: 5,000 mm, air demand: 52,000 m³/h, input voltage: 380 V, heating capacity: 250 kW (339.91 HP), power: 45 kW (61.18 HP), fuel: liquid petroleum gas (LPG), input frequency: 50 Hz, energy consumption: 45 kWh, insulation thickness: 50 mm, nominal power: 250 kW (339.91 HP), sheet thickness steel (max.): 2 mm, Equipment: lighting, * Air Preparation Unit: The air preparation unit is a recirculation system that supplies the cabin with filtered fresh air and exhausts used air during the painting process. It heats the air to 60 °C, mixes the used air with 10% fresh air via an automatic multi-damper system, and reheats the air before routing it back into the cabin. The air is heated using a burner and a heat exchanger, both made of high-quality 304 stainless steel and housed within the fresh air unit. During painting, the air is filtered twice (via front and ceiling filters) before it enters the cabin. The contaminated air is also filtered twice (through inlet and outlet filters) before it exits via the exhaust unit. Air preparation units are insulated like the side walls to minimize heat loss and are protected against potential vibration and noise thanks to rubber seals on the covers. The exhaust air is regulated by a damper in the outlet duct, which helps control the internal pressure of the cabin. * PRINCIPLES OF CABIN OPERATION: The processes in the cabin are controlled via a control panel that manages the following steps: * PAINTING PROCESS: During painting, 100% fresh air is drawn in from outside and passed through front filters before entering the distribution chamber at ambient temperature. The air is then expelled by the extraction unit. Floor filters (paint stops) capture paint particles, and the air passes through the final exhaust filters before being discharged. * FLASH-OFF PROCESS: After painting, the cabin operates for approximately 15 more minutes to purge residual solvents and thinners. During this phase, fresh air from outside continues to circulate in the cabin. * DRYING PROCESS: In this phase, 80% of the air passing through the cabin is heated to 60 °C and supplied to the cabin via a distributor. As 20% of the solvent is released during drying, these solvents are expelled with the exhaust air. Industrial coatings are typically dried at 60 °C, but the cabin temperature can be adjusted via the control panel as required. * COOLING PROCESS: After the 30-minute drying process, the coil is deactivated via the control panel, the pneumatic damper closes, and the extraction system restarts. During the 5-minute cooling phase, fresh air from outside circulates in the cabin, after which the system stops automatically. ELECTRICAL AND ELECTRONIC EQUIPMENT: Chodpfx Agswzl Hxjred These control panels manage the functions and operation of all machinery and devices inside the cabin. The control panel is constructed from durable galvanized sheet metal and steel profiles and is fully enclosed to protect against dust and moisture. Electrical devices and control panels: • The control panel contains essential components such as circuit breakers, fuses, indicator lamps, thermal relays, contactors, and connectors. • Heat-resistant cables are used for command and control lines between the panel and motors or other electrical devices. • Electrical wiring is designed to allow for cabin relocation if necessary. • Operating devices use 380 V 50 Hz, while control devices use 220 V.

Year of construction: 2004, condition: excellent (used), functionality: fully functional, Semi-automatic compact glass storage system 25 positions Maximum glass size: 3210 x 6000 mm Drawer load capacity: 6000 kg Total loading capacity: 150000 kg (150T) Total floor dimensions: L 6100 x W 9200 x H 3050 mm Loading width: 24 pcs. x 170 mm + 1 pc. x 410 mm. In very good and clean condition Good working order, tested As is See video Chjdpfxszdylxe Agrjd

Condition: used, Technical details: floor-plate length: 2003 mm plate width: 1005 mm Cjdpfx Aownfu Nogrshd plate height: 180 mm transport dimensions LxWxH: 2,02 x 1,05 x0,18 m 3 pcs availabe (price per piece) Cast steel Table surface 2020mm x 995 mm Longitudinal groove: Number 4 Size: a=38, h=60, b=59, c=24 mm Center-to-center distance 250 mm Fixing hole: Number 4 Size D=30mm *

Condition: new, Year of construction: 2023, functionality: fully functional, cooling capacity: 295.6 kW (401.90 HP), type of input current: three-phase, type of cooling: water, overall weight: 1,453 kg, input voltage: 400 V, total width: 1,000 mm, total length: 2,200 mm, total height: 1,880 mm, warranty duration: 12 months, Watercooled chiller PANASONIC ECOi P WQE1004CA 295.6 kW Cooling capacity: 295.6 kW / 84.05 tons (12/7 — 35°C) Year of manufacture: 2023 Refrigerant circuit: 2 pcs. Heat exchanger: Plate Compressors: 4 pcs. Bitzer GSD80295VAB4-2 (scroll) Type of refrigerant: R410a Dimensions: 2.2x1x1.88 m. Weight: 1453 kg. Working hours: 0/0/0/0 h. Condition: New CONDITION, TESTING & READINESS The chiller / kaltwassersatz / undergoes seven stages of technical inspection and operational parameter verification. It is also tested at our own test station, with connection to water (or glycol) and adjustment of parameters according to your requirements. After testing, you will receive a detailed report with the operating performance and the overall condition of the chiller. The chiller / kaltwassersatz / is ready for transport and commissioning. Our engineers will assist you with cooling capacity calculations, selection of the appropriate cooling scheme, and configuration of the required equipment options. WARRANTY & SUPPORT The quality of the equipment is confirmed with a warranty ranging from 6 to 36 months. Chedpfx Aewp Duqjgrjd LOGISTICS - Worldwide delivery available - Support with loading, export documentation, and logistics coordination Get a detailed consultation. Photos, videos, and a full testing report can be provided immediately upon request.

Condition: used, functionality: fully functional, Year of construction: 2017, operating hours: 14,022 h, machine/vehicle number: 2621150, control type: CNC control, degree of automation: automatic, actuation type: hydraulic, controller manufacturer: VARIOBEND / ASCO, controller model: VARIOBEND Touch Control, working width: 6,400 mm, sheet thickness (max.): 1 mm, sheet thickness steel (max.): 1 mm, sheet thickness stainless steel (max.): 1 mm, sheet thickness aluminum (max.): 2 mm, back gauge adjustment: CNC-controlled, back gauge: 1,300 mm, overall weight: 8,800 kg, total length: 7,200 mm, total width: 2,150 mm, total height: 1,600 mm, input voltage: 400 V, input frequency: 50 Hz, type of input current: AC, year of last overhaul: 2025, Equipment: CE marking, angle stop, centralized greasing system, cone bending device, documentation/manual, emergency stop, foot remote control, We are offering for sale a VARIOBEND CNC sheet metal folding machine, manufactured by ASCO GmbH, Germany. The machine is currently owned by DIMING d.o.o., a company based in Slovenia, specializing in construction and sheet metal works. The machine is designed for precise and efficient sheet metal bending and is particularly suitable for roofing, façade construction and architectural sheet metal fabrication. Its robust construction and CNC-controlled operation ensure accurate, consistent and repeatable bending results, making it suitable for professional sheet metal processing. Chjdez Sz Txepfx Agrsd We are upgrading our machinery and investing in a newer-generation folding machine. The machine is available for inspection in Slovenia by prior arrangement.

Condition: good (used), Year of construction: 1999, The system is electrically adjustable and has a total of 24 compartments. Chsdpfxozn U Ato Agrsd 2 compartments with a 210 mm shelf height and 22 compartments with a 150 mm shelf height. External dimensions: Height: 3520 mm Width: 8630 mm Depth: 3520 mm Condition: good, second-hand

Condition: good (used), Year of construction: 2017, functionality: fully functional, total length: 55,000 mm, total width: 36,000 mm, total height: 12,000 mm, For sale is our fully automatic KASTO long stock storage system located in Hanau. The system is fully functional, regularly maintained, and can be inspected on-site until handover while in operation. Technical data: Manufacturer: KASTO Maschinenbau GmbH & Co. KG Type: UNICOMPACT 5.0, year of manufacture 2017 Storage locations: 1200 cassettes Cassette length: 12.8 m (long stock up to 12 m) Cassette load capacity: up to 5 t Subdivision: up to 4 sub-compartments per cassette Stacker crane: 1 Infeed/outfeed stations: 2 System dimensions (L x W x H): 55 x 36 x 12 m Control system: Siemens S7, KASTO warehouse management software with batch and sub-compartment management (storage date, fill level, reservations) Condition and documentation: Maintenance history, layout, and technical documentation available Maintenance performed by KASTO service Availability: Available from September 2027 due to relocation Dismantling and transport to be carried out by the buyer. We will gladly provide support with the organization. Location: 63452 Hanau, Germany Codpez Sy R Ajfx Agrehd Price: Negotiable / upon request