Laser cutter

Trumpf C160-2 Plus

Condition: used, mileage: 226,206 km, power: 235 kW (319.51 HP), first registration: 10/1981, fuel type: diesel, number of seats: 27, gearing type: automatic, color: white, brakes: retarder, Equipment: air conditioning, bathroom, onboard kitchen, parking heater, This SG 221 HDS was originally intended for shuttle service to Southern Europe, but remained a one-off; nevertheless, it served as the foundation for two further high-deckers of a special kind: the S 215 HDS and S 216 HDS, which would soon bring Kässbohrer many new customers. Additionally, this coach introduced the 'S' designation: it stands for Super, because these new high-deckers truly lived up to their name. With a height of 3.63 meters, the elevated passenger compartment created even more space, accommodating not only more luggage (16 cubic meters) but also additional service facilities. Extra fuel tanks could also be installed without issue. Regardless of which of the two Super-Setras the bus operator chose, the engineering marvel of these two new Ulm models was that, except for the front section, they were 100% modular components from the Series 200 and shared identical bolted assemblies with other Setra touring coaches. The 216 HDS offered space for up to 16 rows of seats. In comparison, the underfloor cockpit variant provided more interior space. With the Setra SG 221 HDS, Kässbohrer had a vision, but due to the ban on running articulated touring coaches through France, they shifted focus in favor of solo vehicles. The SG 221 HDS was subsequently used as a demonstration and information bus at trade fairs and conferences; with its generously equipped kitchen on board, it became a central meeting point for representatives and customers. +++ Unique Vehicle +++ +++ATTENTION!!!!!+++ +++pure restoration project+++ +++not roadworthy / only the engine runs+++ Engine: Mercedes-Benz Mileage according to odometer Transmission: 5-speed automatic Seating: 24+2+1 sleeping seats ---- Safety Retarder * Fog lights Passenger compartment Stand heating * Air conditioning * Tables * Curtains * Jet ventilation * Reading lamps * Double glazing * Footrests * Tap system with bar and large kitchen in rear area * Separate bar area in the center * Lounge area at the front convertible to sleeping area * Refrigerator + additional * Microwave * Rear WC * Driver microphone Exterior Power steering * Tachograph with disc * Sleeping cabin * Driver door * Roof hatches/fans/roof ventilator Other German vehicle documents * Vehicle dimensions: length 18.00m, width 2.50m, height 3.95m * Twin tires * Tires: Front axle approx. 40% Fjdormlp Ejpfx Adpofw Our internal vehicle number: 7271 Subject to errors. Pictures and text may differ from the actual vehicle. Over 180 vehicles always in stock.

Condition: used, 4,000 running meters of construction profiles, C-shape galvanized Fedpfsur Ikrox Adpofw Used goods, good condition, see pictures Length per piece approx. 12m Profiles 110x90mm Material thickness approx. 3mm Negotiated price: € 4.90/running meter net from stock Goods are in stock. Transportation and installation possible on request. Viewing possible at any time by appointment. Further information on request. Over 5000 running meters of pallet racking from numerous manufacturers in stock. (Subject to changes and errors in technical data, specifications and prices as well as prior sale! See our GTC, all prices excl. VAT ex stock).

Year of construction: 2023, condition: like new (used), Our compact extruder model EX20-25d Manufacturer: PMH GmbH Screw diameter [mm] 20 Screw length [L/D] 25 Screw speed [min-1] 10-192 Screw nitrided Torque 55Nm Drive Three-phase drive with frequency converter Fjdpfsq R Tkwex Adpofw Drive power [kW] 1.1kW Barrel material: nitrided Electrical connection values 3 / N / PE Supply voltage [V] 400V at 50 Hz Control voltage [V] 24V Ceramic heating tapes [W] 1200W Number of heating tapes 3 Max. Output approx. 5kg/h Max. Processing temperature [°C] 300

Condition: used, Year of construction: 2003, operating hours: 23,000 h, Equipment: all wheel drive, Liebherr 924 !!! SPECIAL EXCAVATOR FOR FOREST/WOOD !!!! built in 2003 23000h New pump with invoice 16200¤ New engine with invoice 17700¤ 16ton winch with RADIO Balloon tires Hiab wood tongs built in 2016 Tel: We do your financing or leasing Sale EU: net after presentation of company documents and tax/VAT number Sale outside EU: deposit 500¤ we speak English govorimo srpsko-hrvatski our service for you:* Export papers and EUR1 * Customs license plate Fodpfx Aevm N Dgjdpofw Transport worldwide * Accommodation options Transfer Munich airport or Passau train station Tel:

Condition: new, Year of construction: 2025, operating hours: 1 h, functionality: fully functional, overall weight: 9,040 kg, The compact screening plant is equipped with a powerful 2-deck screen box. The hydraulically folding conveyor belts and the unique compact design make it possible to it, that the screen can be folded up and transported very easily. The aggressive screen box can process up to 180 tons / hour and can be used for a wide range of applications. of applications including recycling, demolition, crushed stone, sand and gravel, soil and compost. compost. The simple drive unit and hydraulics result in easy maintenance, operation and maintenance. Technical description: * Deutz engine * Dimensions feed hopper: 2200 x 1200 mm Ffsdpfoum I Hpsx Adpjw * Dimensions upper screening deck: 2865 x 1200 mm * Dimensions lower screen deck: 2430 x 1200 mm * Key start * Simple hydraulics * Conveyor belts for fine and medium-fine products * Discharge conveyor for oversized products * Webtec for controlling the belt speed * Screen mesh - 1 set of desired screen mesh / several combinations available * Weight: 9,040 kg * Transport dimensions: 8000 x 2200 x 2700 mm (lxwxh) * 1 year warranty from start of operation

Year of construction: 2025, condition: new, The RS-9 shredder has been specially designed for effective processing of various types of papers, taking into account the specifications of the punching machine it will cooperate with. The shredder enables the quick and safe shredding of paper directly received from the die-cutting machine for easy transport via a conveyor system to the baler. Fsdpeiklxbsfx Adpefw Our machine is not only easy to operate but also economical to maintain. It features advanced Siemens control that protects against overload. Additionally, the frequency converter ensures smooth start-up and precise motor control. We also design waste disposal systems from multiple punching machines to one shredder, allowing for fast and maintenance-free material packing into a baler. Feel free to contact us.

Year of construction: 1972, condition: ready for operation (used), Includes (1) DEMAG TC 140 crane, year of manufacture: 1972, load capacity: 50t at 3m radius, slewing angle: 360°, outreach: 5500mm, drive: pneumatic, hydraulic, electric, operating hours: 7153h. (2) Faun LK 910/483-V vehicle, operating hours: 1214h. On-site inspection is possible. Ffsdjuzx T Ropfx Adpjw

Condition: used, mileage: 69,000 km, power: 85 kW (115.57 HP), first registration: 12/2009, fuel type: diesel, overall weight: 3,500 kg, gearing type: automatic, emission class: euro4, Equipment: ABS, central locking, electronic stability program (ESP), soot filter, Net sale price: €4,790 Iveco Daily 35S12 85 kW / 116 hp VAT deductible. Please no emails / Emails can only be processed occasionally due to time constraints! Thank you for your understanding. ---Opening hours and further information: Viewing & purchase without appointment possible: Mon - Thu: 9:00 am to 4:00 pm Fri: 9:00 am - 1:00 pm Sat: 9:00 am - 12:00 pm Address: Tabakried 11 84076 Pfeffenhausen Germany If you have any questions: Christian Hirsch Please try calling multiple times as we are often in customer discussions. ---Service history / Maintained: yes Emissions class: EURO 4 Emission badge: Green Previous owners: 1 VAT deductible: yes Emissions class: Euro 4 = Green badge - With / without air suspension in stock - Reversing camera - LED - Interior lighting with motion sensor - Cargo area length: 4.35 m - Cargo area width: 2.05 m - Cargo area height: 2.07 m Foldable passenger seat Interior features: Cup holders, Power steering Ffsdpfx Aevh S Tajdpsw Exterior features: Sliding door, Electric & heated side mirrors, Central locking including remote control, Electric windows - front Technology: Outside temperature display, On-board computer Safety & Environment: Driver airbag, electric immobilizer, ABS, ESP, traction control, particulate filter If you have any questions: Christian Hirsch Please try calling multiple times as we are often in customer discussions. Further offers at / Equipment details determined via VIN inquiry; errors due to technical limitations possible ---Opening hours and further information: Viewing & purchase without appointment possible: Mon - Thu: 9:00 am to 4:00 pm Fri: 9:00 am - 1:00 pm Sat: 9:00 am - 12:00 pm Address: Tabakried 11 84076 Pfeffenhausen Germany ---All information provided online is non-binding and does not constitute a guaranteed specification. The seller is not liable for typographical or data transmission errors / changes / entry mistakes. Subject to errors and prior sale.

Condition: used, Connect Four – The Building Blocks of Success from DLK – Storage Technology | Levelmaker® | Logistics | Solutions OUR OFFER Panel size: 2,500 mm x 2,000 mm x 38 mm P6 coating Price: €35.00 net per chipboard panel (€7.00/m²) This is a used item. PROJECT PLANNING Our sales team will be happy to prepare a non-binding offer tailored to your individual requirements. Fjdpfxovdqhbe Adpjfw TRANSPORT & ASSEMBLY We are pleased to support you with the transport and assembly of the goods. PAYMENT TERMS Payment terms are to be agreed in the event of an order. The indicated price is per item/net price or as specified in the description (plus VAT). Of course, you will receive an invoice showing VAT. ABOUT US DLK, based in Nordhorn, deals in new and used products across the fields of warehouse logistics, conveyor technology, mezzanine floors, textile storage, as well as machinery for trade, industry, and the skilled trades. We constantly offer attractive used equipment from a variety of manufacturers and brands on favourable terms. If you have any questions, please do not hesitate to contact us.

Condition: new, maximum load weight: 67,200 kg, overall weight: 85,000 kg, axle configuration: > 3 axles, total width: 2,540 mm, Equipment: ABS, You can find our complete vehicle inventory, including immediately and short-term available vehicles, on our website. Excerpts from the equipment. Full specifications available upon request. GOOSENECK * Gooseneck in SNT design to optimize load floor length, approx. 3,700 mm long, with rear bevel approx. 1,000 mm x 10° * For tractors: 6 x 2, 6 x 4, and short 8 x 4 * Detachable steel front wall, approx. 400 mm high * 3 kW electro-hydraulic power unit for controlling hydraulic functions, except for hydraulic winches * Outer beams of the gooseneck with mounting holes for bolt-on lashing rings * 2 pairs of screw-in lashing rings included (LC 5,000 daN) * 1 pair of flat lashing rings at the rear of the gooseneck (LC 10,000 daN) * 1 pair of plug-in aluminum side boards, approx. 400 mm high, anodized * 1 plug-in aluminum rear board, approx. 400 mm high, anodized * Approx. 40 mm thick hardwood flooring above gooseneck, checker plate flooring above kingpin * 3.5 inch kingpin * Gooseneck guide plate for the fifth wheel plate, approx. 500 mm wide * Round NATO socket at the front connection strip (Maeler & Kaege VG 96 917) Fedpfx Ajrgzv Nodpsfw * In addition to the electro-hydraulic unit, a truck hydraulic connection with flow regulator, including bracket for hanging supply lines (Faymonville couplers) * 2 pairs of stake pockets recessed in the gooseneck, for plug-in stakes approx. 100 x 50 mm LOAD FLOOR * Extendable load floor, approx. 11,000 mm long, with rear bevel approx. 500 mm x 10° * Pneumatic locking with conical locking bolts and reinforced locking positions; supply lines are protected inside the extendable beams and automatically adjust to the respective deck length * BPW axles and suspension, 1st axle steered, 2nd axle fixed, all other axles hydro-mechanically forced steered * 1st axle with electro-magnetic reverse lock via reverse gear and manual activation * Axle load capacity: 12,000 kg each * Air suspension with lift and lower valve * 235/75 R 17.5 3PMSF twin tires * Mechanical landing gears with 2-speed gearbox and crank. JOST Modul B – static test load = approx. 50,000 kg * Continuous and, between axles, interrupted approx. 50 mm thick hardwood floor on load deck (increases coefficient of friction) * Slotted holes for attachable and repositionable bridging elements: – at the fixed part behind the gooseneck – on the front of the load floor * 1 sliding intermediate table, approx. 500 mm wide, for the sliding tube with large cross-section, checker plate flooring, front and rear with slotted holes for attachable and repositionable bridging elements * 1 pair of recessed flat lashing rings in the front fixed part of the load floor (LC 10,000 daN) * 9 pairs of recessed lashing rings, foldable outward, in the load floor perimeter frame (LC 10,000 daN) * 1 pair of mechanical rear supports * Remote steering from front and rear via cable remote control, with axle tracking control, no installation required in the tractor * 1st axle with automatic lift axle function and start-up assist according to EU Regulation 2021/535 * Under the gooseneck and at the rear cross member, left and right, a 7-pin socket each with holder for warning signs * Factory-applied sand coating on the perimeter frame of the load floor as well as the checker plates and the transition area between load decks