Cold Circular Saw

TRENNJÄGER PMC 6

Condition: like new (used), turning diameter: 1,500 mm, MAXIMUM WORK DIAMETER : 1600 mm. MAXIMUM WORKING LENGTH : 3000 mm. Iedpfsr Ui R Nox Ah Noht DIAMETER OF LANTERN SHAFT : 83 mm. OUR MACHINE IS ACTIVE WITHOUT ANY PROBLEMS ALL REVOLUTIONS AND AUTOMATICS ARE IN VERY GOOD CONDITION

Condition: refurbished (used), Year of construction: 1974, functionality: fully functional, machine/vehicle number: 1276, CNC Hot Radial Forging GFM SX-13 New in 1974 / 2022 New control system PLC SIEMENS S7 Machine number: 1276 No. of Hammers: 4 Forging force each hummer: 160 Ton Hammer stroke / min: 700/min Hammer lenght: 240 mm Diameter setting range: 80 mm Maximum forging diameter: Structural steel, round-cross section: Ø 130 mm square cross section: Ø 115 mm Smallest dimensions forged: Ø 25 mm Manipulator A max. displacement: 6820 mm Manipulator B max. displacement: 7150 mm Maximum workpiece length: 6000 mm Rapid speed manipulator: 400mm/sec Total connected power: 300 kW 380 V, 50 Hz Ihjdpfx Aeq U R T Nsh Not Machine dimensions: Forging height over floor: 615 mm Total height pf the machinr over floor: 1665 mm Total machine lenght: 32670 mm Total foundation lenght: 33400 mm Tot. machine width (without auxliary equipments): approx 3885 mm Total foundation width: 16000 mm Total weight of the machine: 84.000 Kg

Year of construction: 2008, condition: ready for operation (used), Loading chamber dimensions: 280x580mm, loading height: 700mm, max. load: 300kg, with protective housing and documentation, machine was functional until the end, complete maintenance would have to be carried out on the machine, inspection is possible. Iodoqgfbgepfx Ah Neht

Condition: excellent (used), functionality: fully functional, turning diameter: 1,000 mm, turning length: 8,000 mm, total length: 10,500 mm, A used lathe from the Italian manufacturer Leopolod Pontiggia, model NH 500, is for sale. Technical specifications: Turning diameter over bed: 1,000 mm Turning length: 8,000 mm Extensive equipment as in the photos: 1 x 3-jaw chuck Iedpev Epigsfx Ah Neht 1 x 4-jaw chuck 1 x steady rest + various adapters

Year of construction: 2000, condition: excellent (used), SMS MEER CNC DOUBLE SIDED CHAMFERING MACHINE Manufacturer: SMS MEER Type: RFA 14 Yom: 2000 Ijdoghrguopfx Ah Njht Working range: tube Ø 21,3 – 114,3 mm Wall thickness 2,3 - 11 mm Length: 6-12m Composed of two RFA14 chamfering machines with transport devices between the machines. The task of machines is to chamfer inside and outside both ends of the tubes. The range of diameters of chamfered tubes 21.3-114,3mm and wall thickness of 2.3-11mm in the length range of 6-12m. The task of transport in the area of the chamfering machines is to collect the tubes from the roller table and move them between the chamfering machines.

Condition: refurbished (used), Year of construction: 1988, functionality: fully functional, Löser centerless tube grinding machine - belt grinding machine - polishing machine - Cylindrical grinding machine Centerless tube grinding / polishing machine for workpieces with a minimum length of 1100mm. The machine was built in 1988 and was completely overhauled in 2012. The machine was converted for polishing and then only polished around 10,000 parts. The machine was no longer used after that. During the general overhaul, the motors, bearings and the entire control cabinet with the frequency converters were completely replaced. The machine can be used for both wet grinding and polishing. Wastewater treatment including pumps is not yet available. We can retrofit these for you free of charge according to customer requirements. Ihodpfxspugwie Ah Net The transport systems (roller conveyors) between the grinding stations must also be retrofitted to suit your workpieces. The machine can process pipe diameters from 10mm to 160mm. The grinding motors / polishing motors have an output of 7,5kW per station. The system can be viewed by appointment in our warehouse in D-63128 Dietzenbach.

Condition: new, cutting diameter 170 mm dimensions of saw-band 2080 x 20 x 0,9 mm table height 880 mm cutting speed 40 + 80 m/min 170 mm 125 mm 150 x 190 mm 95 x 120 mm total power requirement 1,1 kW Ijdpfx Aheg Trvrs Neht weight of the machine ca. 0,24 t Dimensions (LxWxH) 870 x 1.550 x 1.740 mm mm This metal band saw comes with a closed worm gear. It also has hydraulic pressure control and a base frame that can be rotated through 45 degrees. Other features include emergency stop, the complete cooling system, the factory base frame, automatic switch-off and the quick-release device.

Condition: as good as new (ex-display), Used block bandsaw CTR520, demo machine at a special price, for logs up to 63 cm diameter, manual cutting sequence, highest cutting accuracy, height adjustment via hand crank, fitted with bimetal saw band for all wood types, max. log diameter 600 (520) mm, max. board width 460 mm, motor output S1 4 kW, standard cutting length 3.6 m, saw band 3110 x 27 x 0.9 mm, extension section cutting length 2.25 m, weight 218 kg, CE, 3 kW S1, 218 kg. Extras not included in price. (Sample image) Iedpfjvrvq Rjx Ah Njht

Condition: good (used), Back off carbide saw grinder VOLLMER model NS700 Isdogqalcopfx Ah Njht

Condition: as good as new (ex-display), Year of construction: 2025, New machine, in stock, available for immediate delivery -Capacity: 18,000 liters -Max. temperature: 350°C -Internal dimensions (L x W x H): 4100 x 2100 x 2100 mm -External dimensions (L, with rails): 9970 x W 3060 x H (with lifting door) 6110 mm -Eurotherm Nanodac control system -Temperature stability (at nominal temperature, without load): ±5°C -Automatic supply and exhaust air dampers -Electric lifting door -Electrically driven hearth cart -Power: 247 ± 9% kW -400 V, 50 Hz -Documentation, CE declaration We are happy to offer installation, commissioning, and operator training for your staff. Contact us! We stock new and used industrial furnaces. Viewing at our warehouse possible by arrangement! Isdpfx Aou Hma Neh Noht Furnace, Furnaces, Annealing furnace, Kiln, Hardening furnace, Heat treatment furnace, Oven, Tempering furnace, Curing furnace, Drying oven, Industrial furnace