Milling machine

TOS KUŘIM FGS 50/63

Condition: ready for operation (used), Year of construction: 1988, travel distance X-axis: 1,400 mm, travel distance Y-axis: 630 mm, travel distance Z-axis: 500 mm, total height: 2,500 mm, total width: 3,350 mm, total length: 3,060 mm, table width: 630 mm, table length: 1,800 mm, overall weight: 6,500 kg, Manufacturer: TOS Kuřim Total power requirement: 23 kVA Spindle: Taper bore in spindle: ISO 50 Number of speeds / speed range: 18 / 35.5 – 1800 rpm Spindle drive motor power: 15 kW Max. spindle torque: 2500 Nm Psdpfsy E Igijx Amyogp Feed range X–Y / Z: Number of steps / range: 16 / 10 – 1800 / 2.5 – 450 mm/min Rapid traverse: 4000 / 1000 mm/min

Condition: good (used), CHIRON FZ 08 KS Magnum is a 5‑axis machining center engineered for precision, high accuracy and reliable production. Travels X450×Y270×Z310 mm; drilling 12 mm; tapping M8. Tool magazine 24 pos., tool Ø max 47 mm (100 mm free), length 160 mm, tool wt 1.2 kg. Spindle HSK‑A40 0–36000 rpm; spindle motor 7 kW; rapid 75 m/min; 3×400V 50Hz; air 6 bar; installed power 14 kW (19 kVA); machine ≈3400 kg; dims 2308×1405×2447 mm. Features: tool‑break control, RS232, switch‑cabinet air‑con, status light. Delivers tight tolerances for automotive, aerospace, medical, watchmaking. Pgsdpeyxn Hcjfx Amyjp

Condition: new, Year of construction: 2026, machine/vehicle number: PRJ069841, ALZMETALL table drill press, drilling capacity in steel: 14 mm Short spindle, MK2, spindle stroke: 80 mm, overhang: 190 mm, column diameter: 65 mm, machine table usable support: 300x240 mm, with T-slots 2 x 12 mm x 80 mm, distance spindle-table min./max. 75/357 mm, machine table height adjustment via hand crank, machine table base plate, usable support: 300x240 mm, with T-slots 2 x 12 mm x 80 mm, distance spindle-base plate min./max. 437/437 mm, manual feed, machine height without options: 825 mm, net weight: 83 kg. - Speed, continuously variable, 230-4000 rpm Pgodpfolub Htsx Amyep Standard equipment: 5" TFT-LCD display with touch function: manual input of target spindle speed, display of actual speed, integrated depth display with touch-sensitive zero-point setting, virtual depth scale in the display, machine status indicators and warning messages in the display, service information, selectable operating language DE/EN/FR/ES/IT/NL/RU AC motor, 230 volts, 50 Hz, plug pre-assembled, cable length 2 m, three separate buttons for right rotation - left rotation - stop, spindle stop via braking function, spindle guard with electrical protection, main switch lockable, mushroom push button (self-locking) for EMERGENCY STOP, speed adjustment continuously variable by means of a potentiometer, protection class IP54, spindle guard with electrical protection, paint finish: DD textured paint signal white RAL 9003, PANTONE 7545c, black. Delivery time: from stock Waiblingen Beinstein.

Condition: excellent (used), Year of construction: 2012, operating hours: 14,901 h, functionality: fully functional, DMG MORI / GILDEMEISTER CTX beta 1250 TC 4A CNC turning/milling center DMG CTX beta 1250 TC 4A, manufactured in 2012. The machine is equipped with a Siemens 840D / ShopTurn 3G control system and features a main and counter spindle, B-axis, Y-axis, upper milling spindle, and a lower turret. Current operating hours are approximately 14,901 hours, and current spindle hours are approximately 5,000 hours. The machine is still connected to the utilities and can be inspected by appointment. Condition: Exceptionally Good / Superbly Maintained Technical Specifications Process: Turning / Milling / Complete Machining Machine Type: CTX beta 1250 TC 4A Year of Manufacture: 2012 Weight: approx. 16,000 kg Power: 85 kVA Control System: Siemens 840D / ShopTurn 3G Main Spindle / Counter Spindle: 1 x FNC 250 each, up to 5,000 rpm Main Spindle: Hainbuch SpannTop nova Modular 80 HS Internal Clamping Device: Diameter 77 mm GS Partial Internal Clamping Device: Diameter 67 mm x 700 mm Coolant System Pressure: 8 / 20 / 40 / 80 bar Short Bar Loader Magazine: IRCO ILS-RBK 100/16 Upper Milling Spindle: HSK-63A, 24-position disc magazine Travel Ranges Upper Unit: B-axis +/-110 degrees, Y-axis +/-100 mm, X-axis 450 mm, Z-axis 1,200 mm Lower Turret: VDI 40, 12 tool positions, X-axis 195 mm, Z-axis 1,200 mm Additional: Turret collet chuck SMW SLU-X-2-ZS 8-101 mm Pgodpfx Amezbg Txsyjp Footprint: approx. 9,200 x 2,600 mm including exhaust filter system, chip conveyor, and bar storage Video recordings + extensive photo collection available upon request via WhatsApp.

Condition: used, Year of construction: 2012, functionality: fully functional, machine/vehicle number: MV0009-001573, travel distance X-axis: 762 mm, travel distance Y-axis: 435 mm, travel distance Z-axis: 510 mm, nominal power (apparent): 33 kVA, overall weight: 5,000 kg, type of input current: three-phase, Doosan DNM 400 – Vertical Machining Center. CNC milling machine for precise metalworking. Suitable for drilling, milling, and tapping operations. Reliable and accurate, ideal for industrial use. Psdpfx Aoy Exg Hjmyjgp

Condition: good (used), total width: 3,500 mm, total length: 19,000 mm, total height: 2,100 mm, workpiece weight (max.): 6,000 kg, grinding diameter: 850 mm, grinding length: 6,000 mm, center height: 425 mm, Cylindrical grinder Schmaltz - RM 82/6000 MACH-ID 9492 Make: Schmaltz Type: RM 82/6000 Centre height: 425mm Grinding Ø: 850mm Grinding length: 6000mm Grinding stone dimensions:1100 x 80 x 560mm Grinding stone speeds: 700Rpm Table inclasement: -5 to +5° Tailstock: 160 x 100Mk Length: 19000mm Width: 3500mm Height: 2100mm Weight: 31000kg Pedpfx Aey Dr Easmyegp Please Note: The information on this page has been obtained to the best of our ability and belief, and from the manufacturers where possible. It is given in good faith, but its accuracy can not be guaranteed. Accordingly, it will not form a representation or constitute contractual terms. We advise you to check any vital details!

Condition: used, Year of construction: 2007, x-travel 620 mm y-travel 420 mm z-travel 400 mm control TNC 320 HEIDENHAIN spindle taper ISO 40 spindle turning speed range 50 - 4.000 U/min table-size 800 x 400 mm table load 400 kg feeds -stepless- 0 - 8000 mm/min rapid traverse 8,0 m/min power capacity 6,0 kW quill stroke 80 mm voltage 400 V total power requirement 17,0 kW weight of the machine ca. 2,1 t dimensions of the machine ca. 1,90 x 2,70 x 2,05 m - .: 90288 - Control: TNC --- - electrical hand wheel - Horizontal milling spindle Podpfx Aeyq Sv Dsmysgp - Coolant equipment

Condition: used, Year of construction: 2011, Technical details: turning length: 310 mm swing diameter over bed: 500 mm swing diameter over bed slide: 290 mm centre distance: 500 mm x-axis: 190 mm z-axis: z1: 335 / z3: 370 mm y-axis: 80 mm revolution per minute: 6000 U/min Control: Heidenhain CNC Pilot 4290 spindle bore: 73 mm bar material dia.: 50 mm tool turret - number of stations: 12 tool taper: VDI 30 mm rapid traverse x + z axis: 30 m/min operating hours - idle run: 36443 h spindle hours: 8545 h interface: ja total power requirement: 20 kVA kW dimension swarf conveyor LxWxH: 3,2 x 0,45 x 1,5 CNC inclined bed lathe With a 3-jaw chuck Ø 160mm with matching flange (max. speed 4500 rpm) and 2 additional sets of spare jaws. Pgsdpfx Amsw S Efzsysp Turret head for 12 tools all with tool drive; Sauter disk turret (C-axis = 300 rpm) Torque main spindle: 95 Nm at 100% and 127 Nm at 40% Chip conveyor 450 K-1/250; year of manufacture 2000 Electric cabinet with Rittal cooling The machine does not have a hydraulic chuck. A manual chuck has been installed by the previous owner. The machine is not functional and is for sale. The machine has an unknown malfunction in the turret, meaning that reference travel and axis movements are not possible. Machining functionality is therefore currently not possible. The machine is for sale and in need of repair! i.D. *

Condition: used, x-travel 500 mm y-travel 400 mm z-travel 400 mm Q U O T A T I O N We are pleased to offer you ex our stock, subject to prior sale, and error in technical data : DECKEL MAHO CNC Universal Milling Machine model DMU 50 M year 1998 Working range: Longitudinal stroke X Axis 500 mm Vertical stroke Z Axis 400 mm Cross stroke Y Axis 400 mm C-axis – table turning, manual 360 ° B-axis – table swivelling, manual ° Pedpfx Aev Td Eljmysgp Table area Ø 700 x 500 mm Inclination range of table (manually) + / - ° Rotation of table (manually) 360 ° Max. Table load approx. 200 kg Maximum distance table – spindle nose 550 mm horizontal distance machine – spindle nose 2 – 6 mm Tool holder Taper ISO 40 Spindle speeds 20 – 4,500 rpm Feed rate max. 5.000 mm/min AC main drive, 0% / 40% power-on time approx. 9 / 13 kW Total electrical load, approx. 15 kW - 400 V - 50 Hz Weight, approx. 3,000 kg Accessories / Special Features • 3 Axis HEIDENHAIN Point to Point Control Model TNC 124 with Monitor, direct programming and input of data and electronic handwheels. • All 3 axis are operated by the milling head, the table is stationary so also out of proportion workpieces can be machined. • Rotary Table can be manually rotated 360° and manually inclined + / -° (each with clamping). The digital read-out of the angles is integrated in the CNC control • Simple coolant unit with pump and tank, built-on switch cabinet (SIEMENS parts) • Pneumatic tool claomping, Some tool holders available, manuals, CE-Certificate, etc. Condition : very good condition ! Ideal for training center or single parts machining ! Please click here to view a video of the machine running : ! Delivery : immediately available, FCA Metzingen Payment : 0 % Net, after conclusion of contract, before loading We always have a large selection of milling machines - CNC or conventional - available. Please let us know your requirements.

Condition: good (used), NHH lathe Turning diameter bed: 260 mm Turning diameter support: 160 mm Spindle bore: 26 mm Turning lenght: 600 mm Heidenhain digital measurement Diameter faceplate: 155 mm Speed: 2000 RPM Dimensions: 150x85x155 cm LxWxH Psdpfxsmw Ukcj Amyjgp